Instanceconfig.xml in obiee 11g error

hi i was following the sampleapp_10722 deployment guide i got struck *2.6.2 Instanceconfig.xml Edits* i cannot proceed further as it was mentioned in the earlier post about the issue one more doubt raised from my end
https://forums.oracle.com/forums/thread.jspa?threadID=2369751&start=0&tstart=0_
Make sure you have all the following tags (in green below) in the file, within the existing <ServerInstance> tag. Some of these entries may already be present in your file. Ensure that entries are made only once and are in appropriate locations.
Some of these entries may already be present in your file since no entries are found in my instanceconfig.xml file
according to the deployment guide
<ServerInstance>
*<SpatialMaps><LayerDataLayout><MaxRecords>1000</MaxRecords></LayerDataLayout></SpatialMaps>*
*<LightWriteback>true</LightWriteback>*
*<ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">*
*<ps:UpgradeAndExit>false</ps:UpgradeAndExit>*
*<ps:UpdateAccountGUIDs>UpdateAndStartNormally</ps:UpdateAccountGUIDs>*
*</ps:Catalog>*
*<LogonParam>*
*<TemplateMessageName>LogonParamSQLTemplate</TemplateMessageName>*
*<MaxValues>100</MaxValues>*
*</LogonParam>*
*<SubjectAreaMetadata>*
*<DictionaryURLPrefix>/metadatadict/</DictionaryURLPrefix>*
*</SubjectAreaMetadata>*
</ServerInstance>
from the earlier post i was suggested to remove ps: from following tags <ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">,<ps:UpgradeAndExit>false</ps:UpgradeAndExit>,</ps:Catalog>
so i have done the above but here comes the main doubt the the highlighted bold tags with in the serverinstance entry where actually i have to place in my instanceconfig.xml file is there any particular place i have to place it or any where with in the
<serverinstance>
</serverinstance>

Thank for your reply Devarasu,
I know where the instanceconfig.xml path location but what i am going to do is to register instanceconfig.xml like what i did in OBIEE10G using below command
sawserver.exe -c D:\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml.
I run this command but still didn't work. How can i register this instanceconfig.xml. Any thought?
Thanks
Joni
Edited by: Joni on Nov 30, 2011 5:57 PM

Similar Messages

OBIEE 11G error while installation at the configuration setting(ASinstance)

Hi Experts,
I am trying to Install OBIEE 11G on Windows on Local PC.But getting the following error .
"Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: PermGen space" at the configuration step of ASinstance.
I have set the virtual memory to maximum.Machine's RAM is 2 GB and Virtual memory is 4 GB which meeets system requirement for OBI.
I have treid few options but nothing seems to workout :( . and even Downloaded and tried to Install the software again.
Any help on this highly appreciated.
Amit

Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Ping failed in Ready callback for proc:1035801255
All other log files (presentation, bi server, scheduler, cluster controller) contains the following error message:
Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
As per comments posted by you here: https://cn.forums.oracle.com/forums/thread.jspa?threadID=2326091
I checked FMW_SECURITY_SERVICE_URL parameter in the NQSConfig.ini file.
This parameter is using VIP (admin server listen to this) and not the actual IP of the server.
Should I change this URL and point it to actual IP.
What is the procedure to change this parameter using EM?

Obiee 11g error

Hi All,
I am using obiee 11g for a demo project.When i a run the a report just with 2 columns from 1 from dimension and 1 from fact.It is throwing an error.the error message is
Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail: .
I tried using foriegn key in bmm layer it is working fine.When i go for complexjoin bmm layer.The above error is coimng up.
Can anybody help me on this.
Thanks,
Chandra

can you try the following sequence for startup.
It is the method I use to start up servers. Before you complete the steps below the following Windows Services should **not** be running.
a. Oracle Process Manager (instance1)
b. Oracle Weblogic NodeManager
1) Start NodeManager from the Command Prompt
Cd <MIDDLEWARE_HOME>\wlserver_10.3\server\bin
startNodeManager.cmd
Wait till you see message "Secure socket listener start at port"
2) Start Admin server from command prompt
Cd <MIDDLEWARE_HOME>\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password, specify the user details that you have mentioned at the time of 11g install
Wait till you see message Admin server is in running mode.
3) Now start Managed server from GUI
Access WebLogic console from a browser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for Managed server to start. Wait till you see Running status.
4) Now start the OBIEE components from command prompt
Cd C:\OBIEE\instances\instance1\bin
opmnctl startall

Configure Smartview in OBIEE 11G error

Hello All
I am trying to integrate smartview with OBIEE 11G, I followed this blog on how to do it:
http://obieeil.blogspot.com/2013/07/obiee-creating-smart-view-connection.html
I am running into an issue and maybe you guys can help me understand how to solve it.
I have downloaded the smartview and I am in the process of creating my private connection..
Now from my laptop, I am able to access my OBIEE with this link:
http://100.20.000.000:9704/analytics/
In the private connection setting, when I entered this url and give username and password, then say 'connect', i am getting an error message simply 'Logon error!' and nothing else to it..
Have you seen this behavior before?
Please let me know what I should do about it

Oh it is you, garuda
changed name

OBIEE 11g: Error 500

Hi Experts,
For OBIEE 11g, I changed the reporsitory to Paint. And also the catalog path by logging into enterprise manager. After restarting the services and went to the url and it gave this error.
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Can any one help me...............i didn't understand y i got this............
Thanks,
DK

can you try the following sequence for startup.
It is the method I use to start up servers. Before you complete the steps below the following Windows Services should **not** be running.
a. Oracle Process Manager (instance1)
b. Oracle Weblogic NodeManager
1) Start NodeManager from the Command Prompt
Cd <MIDDLEWARE_HOME>\wlserver_10.3\server\bin
startNodeManager.cmd
Wait till you see message "Secure socket listener start at port"
2) Start Admin server from command prompt
Cd <MIDDLEWARE_HOME>\user_projects\domains\bifoundation_domain\bin
startWebLogic.cmd
It will ask for user name / password, specify the user details that you have mentioned at the time of 11g install
Wait till you see message Admin server is in running mode.
3) Now start Managed server from GUI
Access WebLogic console from a browser
http://<machinename>:7001/console
Login, Environment > servers > Control > select bi_server1 > click on start
It would take some time for Managed server to start. Wait till you see Running status.
4) Now start the OBIEE components from command prompt
Cd C:\OBIEE\instances\instance1\bin
opmnctl startall

[OBIEE-11g] Error getting Nqid always null value

Hi to all, I've a problem to load Nqid in a dashboard on 11g OBIEE.
The javascript function return always a null value and the document.cookie instruction return an empty string ...
somebody could help me ?!
p.s.: in the firefox properties there is a cookie that contain the id but i can't read it
function getNqid() {
var nameEQ = 'nQuireID=';
var ca = document.cookie.split(';');
for(var i=0; i<ca.length; i++) {
var c = ca;
while (c.charAt(0)==' ')
c = c.substring(1,c.length);
if (c.indexOf(nameEQ) == 0)
return c.substring(nameEQ.length,c.length);
return null;

Hi,
You might want to check the NQQuery.log to see the code that it is running before making a connection. Just to confirm that the connection pool step is working fine, could you try with a simple select statement and see that it does not error out. If it does not, you may want to revisit the procedure code again. I understand from the error that it is expecting something after the END statement (kind of weird though!!). I assume in this case, it could not parse that this is a stored procedure call itself may be. One thread I found is http://stackoverflow.com/questions/4270818/ora-06550-and-pls-00103 which you may want to look for the line break characters.
Hope this helps.
Thank you,
Dhar

OBIEE 11g: Error while starting obiee services

Hi All,
I am facing problem while starting OBIEE services.
Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
I tried staring services through EM and OPMN, however I am getting the same error (in Presentation, BI Server, Scheduler, Cluster Controller log Files).
It's a cluster environment and I am able to start obiee services on node 2, however node 1 gives the error as mentioned above.
How can I resolve this issue?
Regards,
Deepak

Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Hi Dhar,
below is the log file content:
opmn.log:
Error Message from opmn.log file:
[ERROR:1] [] [libopmncustom] Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (1035801255:1640) [No addresses matched the properties for the request]
[ERROR:1] [] [libopmncustom] Ping failed in Ready callback for proc:1035801255
All other log files (presentation, bi server, scheduler, cluster controller) contains the following error message:
Error Message: The configuration file (C:\obi\user_projects\domains\bifoundation_domain\config\fmwconfig\jps-config.xml) was not found or is inaccessible.
As per comments posted by you here: https://cn.forums.oracle.com/forums/thread.jspa?threadID=2326091
I checked FMW_SECURITY_SERVICE_URL parameter in the NQSConfig.ini file.
This parameter is using VIP (admin server listen to this) and not the actual IP of the server.
Should I change this URL and point it to actual IP.
What is the procedure to change this parameter using EM?

OBIEE 11g: Error - Exceeded configured maximum number of allowed output

Hi Guys,
We are implementing OOTB Repository, After data load some of the reports are showing the following error msg. Can anyone point me out where to change the limits?
"Showing error while loading ""View Display Error
Exceeded configured maximum number of allowed output prompts, sections, rows, or columns"". It must be because of the restriction on the number of records in a report"
Thanks in advance

Sudipta Gupta wrote:
Hi Guys,
We are implementing OOTB Repository, After data load some of the reports are showing the following error msg. Can anyone point me out where to change the limits?
"Showing error while loading ""View Display Error
Exceeded configured maximum number of allowed output prompts, sections, rows, or columns"". It must be because of the restriction on the number of records in a report"
Thanks in advanceWhat version of OBIEE are you using? Assuming you are on 11g, below is the link that tells you what tag's needs to be changed in the configuration file in order to increase/decrease the limit on number of rows retrieved in a report across the board:
http://r12bifmw.com/2012/03/23/obiee-errors-with-exceeded-configured-maximum-number-of-allowed-output-prompts-sections-rows-or-column/
Hope this helps.

OBIEE 11g error in filter

Hi,
I have a problem in OBIEE 11.1.1.6
I have a report where project No is a filter i.e in where condition.
Now I have a project no like "ERP-HR STD&2012". Now this is not returning data getting error out. In OBIEE, whenever it see any & sign in the project number filter, it returns error. Now when I run the sql query(getting from nqsquery log) in PL/SQL developer or Toad, I get the correct result showing data.
If some & or % sign appears in the filter data, OBI could not able to run request
Please help.
Thanks
Titas

Hi,
Thanks for reply.
Actually I am creating a bar chart report where in x axis I have project no. And I set project no as graph prompt. Now in the LOV of project no whenever I select one particular project "ERP -HR STD &2012", the report fails to produce graph. But every other LOV values are runnig fine with graph. Only wnehever it finds any project no containing & sign, it fails.
Please help.
Thanks
Titas

OBIEE 11g Error: 500 Internal Server Error

Hi,
I have installed obiee 11.1.1.3 with weblogic server 10.3.3.0 and tried to start the BI services. Iam getting the error following error
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Admin server log_
####<Oct 5, 2010 1:24:08 PM GMT+05:30> <Info> <JDBC> <hdccrmcoe4> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <e3411d921e4f8eb5:363a13c:12b762e7d8a:-8000-00000000000003e3> <1286265248349> <BEA-001128> <Connection for pool "mds-owsm" closed.>
####<Oct 5, 2010 1:24:37 PM GMT+05:30> <Info> <Common> <hdccrmcoe4> <AdminServer> <MDSPollingThread-[owsm, jdbc/mds/owsm]> <<anonymous>> <> <e3411d921e4f8eb5:363a13c:12b762e7d8a:-8000-0000000000000001> <1286265277052> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>
Hi experts how to solve this?
Thanks,

Hi,
I tried that command but Iam getting the following error
C:\Documents and Settings\Administrator>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
=======================================================================
opmn id=hdccrmcoe4:9501
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication
_obips1/
Error
--> Process (index=1,uid=1245712643,pid=8928)
failed to start a managed process after the maximum retry limit
Log:
none
Thanks,
Satheesh Kumar

OBIEE 11g Error (11.1.1.5)

Hi All,
I am getting the following error in Enterprise Manager. Can someone please help me to fix it?
ThreadPool<HostLookup>: Worker thread job errored out. Unable to resolve the name for 192.168.0.100 Thanks in advance.

I have exported ODBC path manually.
export ODBCINI=$ORACLE_INSTANCE/bifoundation/OracleBIApplication/$ORACLE_BI_APPLICATION/setup/odbc.iniAnd then executed the nqcmd command. Now I am getting the different error.
Oracle BI ODBC Client
Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
Initialize client environment failed, possibly caused by incomplete installation
[nQSError: 47001] Invalid Oracle BI Bin directory:
/oracle/home/bifoundation/server/bin.
[0][State: IM004] [DataDirect][ODBC lib] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed Connect open failed

Error while exporting to PDF document in OBIEE 11g

Hi
In OBIEE 11g we are facing an issue regarding exporting a few reports to pdf. It is resulting in following error: "Error generating PDF document".
The reports are placed on a dashboard which has a prompt too. However, when we remove the prompts, the export is working fine.
We will really appreciate any help in this regard.
Thanks.

Hi,
Looks like this is a sort of known bug with PDF creator in 11g. Try implementing the below solution:
To configure the Javahost service, edit the Javahost service configuration parameters in the
instanceconfig.xml file. The parameters are
identified by their relative path starting from the /WebConfig/ServerInstance node
For example:
<JavaHost>
<PDF>
<InputStreamLimitInKB>50000</InputStreamLimitInKB>
</PDF>
</JavaHost>
After changes restart Siebel Analytics Java Host and Siebel Analytics Web services
If it doesn't work try to create same report in xml publisher as presentations services in obiee has limited capacities in printing out reports.
Refer to this thread for related useful information: Error in creating a PDF
Hope it helps.
Thanks,
-Amith.

Strange Error in OBIEE 11g

Hi Friends,
Currently, i was working in mapping feature in obiee 11g. For that i have added
<li>Necessary <spatial tags> in instanceconfig.xml file.
<li>Created a new datasource in the mapviewer and brought it to the online.
<li> After that i went into analytics page and under the Administration tab--->Manage Map Data-->Import Layers
<li> Soon after pressing it an import layers dialog box has to open, but instead of it for me the following error is occurring
There was an error with the server CallBecause of that, it is not allowing me to select layers. what may be the problem over here.
All izz Well
GTA

GTA,
Did you perform the Map Builder Application part here before Administration tab--->Manage Map Data-->Import Layers
http://www.oracle.com/technetwork/middleware/mapviewer/downloads/index-100641.html
Refer http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-map-views-integration-with-mapviewer/
Hope this helps

OBIEE 11g Writeback Error

Hi All,
I am unable to configure the writeback functionality in OBIEE 11g, i am getting error while pressing Apply button in the report no error message is displayed in the error box only 2 ok buttons.
Folder customMessages doesn't exist:
"ORACLE_INSTANCE/bifoundation/OracleBIPresentationServicesComponent/coreapplication_obipsn/analyticsRes/customMessages"
so i created the folder and added the writeback xml file to the folder.
is there is any way to check the error.?

Hi,
Please check if you have followed the following steps mentioned:
http://obiee10grevisited.blogspot.in/2012/02/write-back-in-obiee11g.html
Regards
MuRam

LDAP configuration error for SampleLiteApp in OBIEE 11g

Hi Experts,
I am trying to configure the LDAP for "SampleAppLite" application which comes with OBIEE 11g default installation in OBIEE11g. I followed the following steps in the oracle document,
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10543/privileges.htm#BABCDCFE
Unfortunately i am getting the following exception when i start my OBIEE server, not only that after this also i am getting same error when i try to login using the any of the user (User is LDAP).
(initially MyBISystemUser as <user_id> )
++java.security.PrivilegedActionException: oracle.bi.security.service.SecurityServiceException: SecurityService::authenticateUserWithLanguage - '<user_id>' was authenticated but could not located within the Identity Store.++
++at oracle.bi.security.service.SecurityWebService.authenticateWithLanguage(SecurityWebService.java:185)++
++at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)++
++at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)++
++at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)++
++at java.lang.reflect.Method.invoke(Method.java:597)++
++at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)++
++at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)++
++at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)++
++at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:265)++
++at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)++
++at weblogic.wsee.jaxws.tubeline.FlowControlTube$FlowControlAwareTube.processRequest(FlowControlTube.java:155)++
++at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:94)++
++at weblogic.wsee.jaxws.tubeline.FlowControlTube$1.run(FlowControlTube.java:92)++
++at javax.security.auth.Subject.doAs(Subject.java:337)++
++at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:91)++
++at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)++
++at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)++
++at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)++
++at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)++
++at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:373)++
++at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:524)++
++at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:255)++
++at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)++
++at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:210)++
++at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:311)++
am i missing any configuration? Or is it a bug in oracle OBIEE 11g? Can anyone guide me to resolve this issue.
Much appreciate your answer

Though this is little late for you but may help others.
Check default authenticator and ensure that control flag is NOT set to REQUIRED
Check here http://onlineappsdba.com/index.php/2011/06/21/unable-to-login-to-obiee-anylytics-after-oid-integration-user-was-authenticated-but-could-not-be-located-within-the-identity-store/

Instanceconfig.xml in obiee 11g error

Similar Messages

Maybe you are looking for