Instances in OFFLINE State

Hi,
I have a 11.1.0.7 RAC database running on a RHEL 64 bit platform. The CRS version being 11.2.0.2
I restarted my database using the command srvctl start database -d MYCSMR and also its services using the command srvctl start service -s MYCSMR
MYCSMR1 % srvctl status service -d MYCSMR
Service CONSUM is running on instance(s) MYCSMR1, MYCSMR2, MYCSMR3
Service CONSUM_SEARCH is running on instance(s) MYCSMR1, MYCSMR2, MYCSMR3
But I get few alerts in my EM that, ora.MYCSMR.CONSUM_SEARCH.MYCSMR2.srv has instances in OFFLINE State , ora.MYCSMR.CONSUM_SEARCH.cs has instances in OFFLINE State and ora.MYCSMR.CONSUM_SEARCH.MYCSMR1.srv has instances in OFFLINE State
Could you please help me what needs to be checked and how to fix those alerts?
Thanks!

Hi,
If srvctl is showing the correct status and Grid Control is reporting false, its issue with Grid Control. There are many bugs in Grid Control around RAC monitoring.
I would say re-registering resources in Grid control would be a workaround.
Thanks
krishan

Similar Messages

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.

Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,

You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance".

( Urgent)Maxdb Database is in Offline STATE

Hi Expert's
We got SAP Content Server with MaxDB on Suse Linux. It is production database. After rebooting the database is gone in offline state, when we are trying to change offline state to online state with DBM GUI we are getting following error.
1. DBM gui hangs when we trying to connect Database.
2. some time's get connected , but the database is in offline state .
3.when we are trying to change offline state to online , we got the error "knldiag gone in to admin before restart at o/s level ant the error 1000.
it's very critical , please we need help on this
Best regards
Mohammed farooqui

Hi,
please open an official message on component BC-DB-SDB and please have a Telnet connection openend to the machine in question (where the DB of the Content Server resides) (include the logondata).
Please also attach the knldiag.err file to the message.
Kind regards,
Roland

GSD in OFFLINE State

On a two Node cluster, the result of running "crs_stat - t" on the first node for gsd is shown as listed below
Name Type Target State Host
ora.node1.gsd application ONLINE OFFLINE
on the second node for gsd is shown as listed below:
Name Type Target State Host
ora.node2.gsd application ONLINE ONLINE node2
What caused gsd to be in an OFFLINE state on the first node?
How can I restart gsd on the first node?
Some documentation states that GSD has no significant role in Oracle 10G. It is there just for backward compatibility. If this is true, do I need to worry about
gsd running if all my components (clusteraware, database, listener etc) are all running in 10G?
Thank you very much!!!

Hello. This forum is for reporting problems with the published Oracle documentation. You have a better chance of getting a reply if you post on the Database - General forum.
Regards,
Diana

Cannot get new token due to device offline state. Id error 40760

Hi,
I have a Blackberry Curve 9380
i can't go in my app world, the message says: Cannot get new token due to device offline state id error 40760
what should i do?
btw, i'm french
thanks!

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
If not, then please try this sequence:
1) Remove AppWorld from your BB
KB10040 How to view or remove installed applications on a BlackBerry smartphone
If it requests that you reboot the BB, do so
2) Do a Batt-Pull reboot (power on, remove battery, wait, insert battery, wait), even if redundant to the one you did in step 1.
3) Install (on your BB) a fresh copy of AppWorld
http://blackberry.com/appworld/download
Again, if it requests to reboot, do so.
4) Do another Batt-Pull reboot
5) See if it now works.
Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"The device entered an offline state" - Iotech Daqboard 505

Hello everyone,
Lately, I have been using an Iotech Daqboard 505 combined with DasyLab. That board has maximum sample rate 200000 samples/sec. Unfortunately, when I set that sampling rate into Dasylab I get instantly a daqboard runtime error – “The device entered an offline state”. By reducing the sampling rate I can increase the duration that everything works fine. So far the rate that looks to have no problems is 5Hz.
What can I do so that I can utilize my card’s maximum sampling rate?
I have been told that enabling DMA bus mastering on the PCI slot that the board is installed is the solution. Is it correct? If so, how could that be done?
Thanks in advance

I have already run Daq Confijuration Utility and the "Test hardware" option inside Dasylab. The result in both is "Sampling Rate: 200000samples/sec".
In order to eliminate possible reasons of the malfunction I dramatically simplified my layer. Last time I tested it, it had only an A/D module directly connected to Digital Meter Module. The only parameter I was changing was Sampling Rate (Buffer size, block size --> Auto). At 5Hz all fine. After that, the higher the Sampling Rate the faster the error message pops up.
I haven't contacted MCC so far.
I am using 7 channels.
Thanks for the response so far

Cannot Download Apps: device offline state???

Everytime I try to download an app from appworld, it says "Cannot get new oken due to device offline state (Error Id:40760). Please help if you know how to fix this

The specific error you cite is not yet published in the public KBs:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Perhaps your search will reveal better results than mine. However, some clarifications are needed before I attempt to provide you any further guidance.
Is this error achieved when you use, via USB/tether, the PC/browser version of AppWorld?
Or is this error achieved via the on-device AppWorld interface?
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Crs_stat demons are offline state

Hi,
I successfully installed grid and created RAC database. but when i checked the crs status all the diskgroups,gsd and oc4j are in offline mode. how to make them online.
[11:34 AM [email protected] grid_home]# bin/crs_stat
NAME=ora.ARCLOG.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.CTRL.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.DBFILE.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.FRA.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.LISTENER_SCAN1.lsnr
TYPE=ora.scan_listener.type
TARGET=ONLINE
STATE=ONLINE on rac-node2
NAME=ora.REDO1.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.REDO2.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.VOTE.dg
TYPE=ora.diskgroup.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.eons
TYPE=ora.eons.type
TARGET=ONLINE
STATE=ONLINE on rac-node2
NAME=ora.finance.db
TYPE=ora.database.type
TARGET=ONLINE
STATE=OFFLINE
NAME=ora.gsd
TYPE=ora.gsd.type
TARGET=OFFLINE
STATE=OFFLINE
NAME=ora.net1.network
TYPE=ora.network.type
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.oc4j
TYPE=ora.oc4j.type
TARGET=OFFLINE
STATE=OFFLINE
NAME=ora.ons
TYPE=ora.ons.type
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.rac-node1.ASM1.asm
TYPE=application
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.rac-node1.gsd
TYPE=application
TARGET=OFFLINE
STATE=OFFLINE
NAME=ora.rac-node1.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.rac-node1.vip
TYPE=ora.cluster_vip_net1.type
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.rac-node2.ASM2.asm
TYPE=application
TARGET=ONLINE
STATE=ONLINE on rac-node2
NAME=ora.rac-node2.gsd
TYPE=application
TARGET=OFFLINE
STATE=OFFLINE
NAME=ora.rac-node2.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on rac-node2
NAME=ora.rac-node2.vip
TYPE=ora.cluster_vip_net1.type
TARGET=ONLINE
STATE=ONLINE on rac-node2
NAME=ora.registry.acfs
TYPE=ora.registry.acfs.type
TARGET=ONLINE
STATE=ONLINE on rac-node1
NAME=ora.scan1.vip
TYPE=ora.scan_vip.type
TARGET=ONLINE
STATE=ONLINE on rac-node2
thanks in advance.

I tried to start the diskgroup using the mentioned command, but it showing the following error.
PRCR-1079 : Failed to start resource ora.ARCLOG.dg
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
CRS-2674: Start of 'ora.ARCLOG.dg' on 'rac-node2' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
CRS-2674: Start of 'ora.ARCLOG.dg' on 'rac-node1' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Plz help on this.

Service remains in "offline*" state - how to reset it?

Hello.
Since two days ago, I've got a problem with one of the sevices on a S10 Sparc system.
--($:~)-- svcs -a | grep \*
offline*       Jan_08   svc:/application/oracle/database:RACE002
--($:~)-- svcs -xv svc:/application/oracle/database:RACE002
svc:/application/oracle/database:RACE002 (Oracle database)
State: offline since 8. Januar 2008 03:43:55 CET
Reason: Start method is running.
   See: http://sun.com/msg/SMF-8000-C4
   See: man -M /usr/share/man -s 5 ora-smf
   See: /var/svc/log/application-oracle-database:RACE002.log
Impact: This service is not running.
--($:~)-- tail /var/svc/log/application-oracle-database:RACE002.log
database RACE002 is OPEN.
[ Jan 7 03:41:45 Method "start" exited with status 0 ]
[ Jan 8 03:42:52 Stopping because service disabled. ]
[ Jan 8 03:42:52 Executing stop method ("/lib/svc/method/ora-smf stop database RACE002") ]
Database closed.
Database dismounted.
ORACLE instance shut down.
[ Jan 8 03:43:00 Method "stop" exited with status 0 ]
[ Jan 8 03:43:54 Enabled. ]
[ Jan 8 03:43:55 Executing start method ("/lib/svc/method/ora-smf start database RACE002") ]Ie., the service is in "offline*" since Jan 8.
How do I get the service to change into any other different state, be it "online", "maintenance" or "offline"?
--($:~)-- svcs -xv svc:/application/oracle/database:RACE002
svc:/application/oracle/database:RACE002 (Oracle database)
State: offline since 8. Januar 2008 03:43:55 CET
Reason: Start method is running.
   See: http://sun.com/msg/SMF-8000-C4
   See: man -M /usr/share/man -s 5 ora-smf
   See: /var/svc/log/application-oracle-database:RACE002.log
Impact: This service is not running.
--($:~)-- sudo svcadm disable svc:/application/oracle/database:RACE002
--($:~)-- svcs -xv svc:/application/oracle/database:RACE002
svc:/application/oracle/database:RACE002 (Oracle database)
State: offline since 8. Januar 2008 03:43:55 CET
Reason: Start method is running.
   See: http://sun.com/msg/SMF-8000-C4
   See: man -M /usr/share/man -s 5 ora-smf
   See: /var/svc/log/application-oracle-database:RACE002.log
Impact: This service is not running.
--($:~)-- svcs svc:/application/oracle/database:RACE002
STATE          STIME    FMRI
offline*       Jan_08   svc:/application/oracle/database:RACE002
--($:~)-- sudo svcadm mark maintenance svc:/application/oracle/database:RACE002
--($:~)-- svcs svc:/application/oracle/database:RACE002
STATE          STIME    FMRI
offline*       Jan_08   svc:/application/oracle/database:RACE002
--($:~)-- sudo svcadm clear svc:/application/oracle/database:RACE002
svcadm: Instance "svc:/application/oracle/database:RACE002" is not in a maintenance or degraded state.
--($:~)-- sudo svcadm refresh svc:/application/oracle/database:RACE002
--($:~)-- svcs svc:/application/oracle/database:RACE002
STATE          STIME    FMRI
offline*       Jan_08   svc:/application/oracle/database:RACE002
--($:~)-- sudo svcadm restart svc:/application/oracle/database:RACE002
--($:~)-- svcs svc:/application/oracle/database:RACE002
STATE          STIME    FMRI
offline*       Jan_08   svc:/application/oracle/database:RACE002 Note: I'm not looking for an answer on how to make the oracle database RACE002 be available again. That can easily be done as "oracle" OS user and using "sqlplus" to send a "startup" command.
I'm looking for a way to make SMF behave again. Because right now, I cannot use SMF to change the state of the service, which is a problem, as my backup scripts fail because of that :/
Thanks a lot,
Michael

Hello again Michael, would you be able to post the output of the following procedure?
4:41pm cmdrkeen@crossfire /research #>svccfg
svc:> select network/ssh
svc:/network/ssh> listprop(except obviously with your service rather than SSH)

Not able to bring livecache instance into online state

Hi Folks,
I am trying to do a livecache copy for our scm 4.0 ,from our production system into our dev.. I am following note 457425.
I have successfully restored the database using DB gui, and now the instance is in "ADMIN" mode, while bringing it up into "ONLINE" mode, it gives me the following error;
dbmcli on LCA>db_online
ERR
-24895,ERR_SHUTDOWN: shutdown of database occured
-71,connection broken server state 6
This is what the knldiag file contains,I have truncated most part of the file and showing only the last 30 lines or so..
2008-08-27 19:31:35    89     53000 OBJECT   Restarted Garbage coll: 0
2008-08-27 19:31:35    89     54003 dynpool DYNP_K51_LOCK_LIST     : 75531152
2008-08-27 19:31:35    89     54003 dynpool LOCK maxlocks          : 300000
2008-08-27 19:31:35    89     54003 dynpool LOCK items             : 902400
2008-08-27 19:31:35    89     54003 dynpool LOCK Regions           :     24
2008-08-27 19:31:35    89     54003 dynpool LOCK TransRegions      :      8
2008-08-27 19:31:35    89     54003 dynpool LOCK RegionGlob+Space :   3456
2008-08-27 19:31:35    89     54003 dynpool LOCK TransGlob         :    768
2008-08-27 19:31:35    89     54003 dynpool LOCK SupplyItemsPerRgn :    100
2008-08-27 19:31:35    89     54003 dynpool LOCK SupplySize        : 192000
2008-08-27 19:31:35    89     54003 dynpool LOCK RowHash entries   : 300000
2008-08-27 19:31:35    89     54003 dynpool LOCK TabHash entries   : 60000
2008-08-27 19:31:35    89     54003 dynpool LOCK Row+Tab hash size :2880000
2008-08-27 19:31:35    89     54003 dynpool LOCK Trans entries     :    328
2008-08-27 19:31:35    89     54003 dynpool LOCK trans_list size   : 73472
2008-08-27 19:31:35    89     54003 dynpool LOCK TransPtrList      :   2624
2008-08-27 19:31:35    89     54003 dynpool LOCK TransHash entries :    328
2008-08-27 19:31:35    89     54003 dynpool LOCK TransHash size    :   2688
2008-08-27 19:31:35    89     54003 dynpool LOCK SupplyPoolSegments:   9000
2008-08-27 19:31:35    89     54003 dynpool LOCK SupplyPoolSize    : 72216000
2008-08-27 19:31:35    89     54003 dynpool LOCK ObjColl_list size : 10496
2008-08-27 19:31:35    89     54003 dynpool LOCK ObjReq_list size :   5248
2008-08-27 19:31:35    89 ERR 20028 Log      DBIdentifier of DataVolume (tpcscmpd:LCA_20061019_161059) and LogVolume (TPCSCMD
D:LCA_20060613_163702) does not mat
2008-08-27 19:31:35    89 ERR 20028 Log      ch
2008-08-27 19:31:35    89     11000 vdetach '/sapdb/LCA/saplog/DISKL001' devno 3 T77
2008-08-27 19:31:35    11     12822 TASKING Thread 149 joining
2008-08-27 19:31:35   149     11566 stop     DEVi stopped
2008-08-27 19:31:35    11     12822 TASKING Thread 150 joining
2008-08-27 19:31:35   150     11566 stop     DEVi stopped
2008-08-27 19:31:35    89 WNG 20026 Admin    Initialization of log for 'restart' failed with 'LogAndDataIncompatible'
2008-08-27 19:31:35    89     20040 Admin    Kernel state: 'OFFLINE' reached
2008-08-27 19:31:35    89     12696 DBSTATE Change DbState to 'SHUTDOWN'(25)
+++++++++++++++++++++++++++++++++++++++ Kernel Exit ++++++++++++++++++++++++++++
2008-08-27 19:31:35     0     12845 DBSTATE Kernel exited normal
2008-08-27 19:31:35     0     12808 DBSTATE Flushing knltrace pages
2008-08-27 19:31:36     0     11560 COMMUNIC Releasing T77
2008-08-27 19:31:36     0     12696 DBSTATE Change DbState to 'OFFLINE '(29)
Kindly help.

> I have done the recovery using database manager gui 7.5 by using recovery option. Infact the log area was empty.
Yes - it may have been empty but it was not formatted - thus the error message.
You can try (on command line/shell):
dbmcli -U c -uUTL util_execute clear log
and after that try to bring the DB online again.
Markus

ASM Disk offline - State hung

Hey in my ASM configuration I setup this
Disk Path ASM Name Failure Group
/dev/raw/raw4 Data1 FG1_Data [on SAN1]
/dev/raw/raw5 Data2 FG2_Data [on SAN2]
/dev/raw/raw6 Reco1 FG1_Reco [on SAN1]
/dev/raw/raw7 Reco2 FG2_Reco [on SAN2]
all good.
My I switched off SAN1. A query on v$asm_disk shows disk DATA1 & RECO1 as offline - hung state.
I did in the asm instance in sqlplus:
ALTER DISKGROUP DATA DROP DISK data1; -> success
ALTER DISKGROUP RECO DROP DISK reco1; -> success
ALTER DISKGROUP DATA ADD failgroup DATA3 '/dev/raw/raw4'; -> success
ALTER DISKGROUP RECO ADD failgroup RECO3 '/dev/raw/raw6'; -> success
The query on v$asm_disk stills show the DATA1 and RECO1 - but DATA3 and RECO3 as well.
Is it right, that the "old" entries will disappear, once the ASM instance is restarted ? I can´t do this at the moment.
In generell - why went the ASM disks to offline ?
SAN1 was switched off for about 5 minutes - and was then switched back on.
Is this expected behaviour ?

Hi Chris,
as long as the information is still partially valid, the devices will be displayed in v$asm_disk. Main reason is: Some Oracle processes still have handles open on these devices, and as long as they exist the devices can still be seen.
A Restart of ASM + database will definitely remove these entries (if they cannot be seen by the operating system).
Regarding your other question: Oracle can only detect if a device is going offline (errors in the database and asm alter log). If a device goes online again, Oracle does not check this (this would be a major overhead to rescan lets say every minute to see if a disk is back online).
Hence you have to reinclude the dropped/offlined disks yourself.
Depending on the version (10g or 11g) and depending on the diskgroup compatibility level for rdbms a disk can simply be returned into the diskgroup (11g - alter diskgroup <dg> set disk <disk> online) and resilvered or have to be reincluded into the ASM instance (no resilvering, but a complete rebalance 10g: alter diskgroup <dg> add disk <disk> to failgroup <fg> [force])
Sebastian

Database Adapter Polling, Instances in Running State

Hello All,
I have a composite in which the database adapter is a service (polling a table in SQL Server). Sometimes, when instances gets created, like 2 instances are being in a running state and not being completed at all. we terminated the instances last 2 times, and this scenario is being repeated again. If i click the instance which is running, i can only see the service which says it is completed, no BPEL component is being seen, can anyone faced this issue before ? why this is happening ?
Please help....
Naresh

Could you provide more insight on how you wired the adapter and BPEL process inside the composite? What does the BPEL look like? You could add a BPEL component that persists some stuff just for test purposes. That could give you more feedback from the console.
hth,
Peter Paul

BPEL instances in Running state - SOA version 11.1.1.4

Hi ALL,
I am Working with the Orace SOA 11.1.1.4 version and facing the same issue
Description :
I have developed a synchronous BPEL / Composite that listens over a JMS Queue configured in weblogic (MessageType is Text /String - XML Stirng). Based on the Operation Type in the Message the BPEL forwards the message to other Composites .
If the server is restarted or the composite is redeployed , the mesages get processed fine ,but if there are more no of messages in the queue , the instances hang in running state , this happens frequenlty.
I tried modifying the DispatchThreds and invoke Thread which make thing even worse :-(
Help Needed Got badly stuck up :-(
-Lakshmi

Team,
Any idea? I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.
Your help is appreciated.

How to put both instances in up state

We have two instances in our database(backupdb) (1) EXDB (2) SCBA, both start normally in the morning, but after some time one of instance SCBA stop replying, then i have to restart database again to resolve the issue, after this the problem do not reoccur for the rest of day. I could only find one suspected entry in listener status output where it say Instance "scba", status UNKNOWN, has 1 handler(s) for this service... How to resolve this issue.........
oracle@backupdb:~/11g/network/admin$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 31-MAR-2011 11:55:21
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=backupdb)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date                31-MAR-2011 10:58:21
Uptime                    0 days 0 hr. 56 min. 59 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /home/oracle/11g/network/admin/listener.ora
Listener Log File         /home/oracle/diag/tnslsnr/backupdb/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=backupdb)(PORT=1521)))
Services Summary...
Service "exdb" has 1 instance(s).
Instance "exdb", status READY, has 1 handler(s) for this service...
Service "exdbXDB" has 1 instance(s).
Instance "exdb", status READY, has 1 handler(s) for this service...
Service "exdb_XPT" has 1 instance(s).
Instance "exdb", status READY, has 1 handler(s) for this service...
Service "scba" has 1 instance(s).
Instance "scba", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
less /home/oracle/11g/network/admin/listener.ora
# listener.ora Network Configuration File: /home/oracle/11g/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = scba)
      (ORACLE_HOME = /home/oracle/11g)
      (SID_NAME = scba)
    (SID_DESC =
      (GLOBAL_DBNAME = exdb)
      (ORACLE_HOME = /home/oracle/11g)
      (SID_NAME = exdb)
EM_LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = backupdb)(PORT = 1522))
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = backupdb)(PORT = 1521))
)

malhi wrote:
We have two instances in our database(backupdb) (1) EXDB (2) SCBA, both start normally in the morning, but after some time one of instance SCBA stop replying, then i have to restart database again to resolve the issue, after this the problem do not reoccur for the rest of day. I could only find one suspected entry in listener status output where it say Instance "scba", status UNKNOWN, has 1 handler(s) for this service... How to resolve this issue.........
oracle@backupdb:~/11g/network/admin$ lsnrctl status
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 31-MAR-2011 11:55:21
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=backupdb)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date                31-MAR-2011 10:58:21
Uptime                    0 days 0 hr. 56 min. 59 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /home/oracle/11g/network/admin/listener.ora
Listener Log File         /home/oracle/diag/tnslsnr/backupdb/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=backupdb)(PORT=1521)))
Services Summary...
Service "exdb" has 1 instance(s).
Instance "exdb", status READY, has 1 handler(s) for this service...
Service "exdbXDB" has 1 instance(s).
Instance "exdb", status READY, has 1 handler(s) for this service...
Service "exdb_XPT" has 1 instance(s).
Instance "exdb", status READY, has 1 handler(s) for this service...
Service "scba" has 1 instance(s).
Instance "scba", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
less /home/oracle/11g/network/admin/listener.ora
# listener.ora Network Configuration File: /home/oracle/11g/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = scba)
(ORACLE_HOME = /home/oracle/11g)
(SID_NAME = scba)
(SID_DESC =
(GLOBAL_DBNAME = exdb)
(ORACLE_HOME = /home/oracle/11g)
(SID_NAME = exdb)
EM_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = backupdb)(PORT = 1522))
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = backupdb)(PORT = 1521))
Why are you defining two listeners? (listener and em_listener)?
One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database or client. That would be like the telephone company building a separate switchboard for each customer.

New weblogic instances goto unknown state

Hi ,
When i create a new weblogic server using Admin console , the server at time shows up in UNKNOWN State, where as normal behaviour is to show in SHUTDOWN state. have you seen or know about this kind of behaviour before? The problem with this unknown state , is once i create and change properties , i cannot able to start the server from Admin Console.
But when i restart the admin server, these new servers goto "shutdown" state, after which i could able to start the servers fine.
But i had to restart admin server everytime i create a new server , which ends up in unknown state.
im using WLS 10.3.6 version with node manager configured and jvm args are -Xmn 256m -Xmx512m respectively, let me know if you need more info on this
Thanks in advance,
Patra

Hi ,
sorry for the late response.
FlyingBird - here are my answers to your questions.
I created managed servers - Admin server is already created long back.
yes,, both startWeblogic.sh and startNodeManager.sh are started. I could able to see the node manager is reachable from admin console and node manager process has started fine on the node.
Sharmela - I dont see any error reported.
Since the new managed servers that are created , are not started up yet, ( i.e. i could not able to start them as they end up in UNKNOWN state ), they does not have the directory structure created in the linux box. so , there is no <MSX>/logs dir created so , im clues less on what is going on.
i have like more than 60 managed servers on this admin console. this issue was not there when there were less managed servers ( ~ 20 but happens everytime i create a new managed server. Not sure, what is the issue. Hard part is , i dont find any logs for it to find a direction in troubleshooting. Appreciate your advises.
Let me know if you need more info.
Regards
PatraD

Instances in OFFLINE State

Similar Messages

Maybe you are looking for