Instances In recovery are getting recovered only after restart of server.

Hi All,
The issue I face is :There is a BPEL Process with a DB adapter which has to poll on a database.
Now my DB adapter polls,but the instance in EM remains in Recovery State.
From BPEL Service Engine even if I recover,they dont get recovered.
But,If I restart the server(SOA) and and From BPEL Service Engine if I recover,they get recovered.
SO,every Time I hav to restart the server.:-( :-(
Kindly ,suggest the solution.

The solution is either change the order of deployment or copy the FileAdapter.rar file in $ORACLE_HOME/lib location and restart the server as mentioned here.
http://soa-bpel-esb.blogspot.com/2011/04/javalangnoclassdeffounderror.html

Similar Messages

TS1545 I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbo

I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.

You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US

While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14

Hi
While Configuring Siebel Server we are getting "Unable to Connect to Gateway server" error in siebel 8.2.2.14
Our OS is windows 2008 R2 64 bit,Orcale client is 11g 32 bit and Oracle DB is in 11g.We are also able to connect to DB using ODBCSQL.
Please help.
Regards
Shuvendu

Hello Shuvendu,
Thanks for using Oracle Communities.
About your error, there could be many reasons, To start with, please have following knowledge article to know possible reasons.
C028: "Unable to Connect to the Siebel Gateway Name Server" Logged By Configuration Wizard (Doc ID 1391312.1)
I hope it helps.
Best Regards,
Chetan
P.S. If any one of the provided responses has been correct or helpful it would be great if you could mark them as appropriate.

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Firefox 11.0 Personas are not staying enabled after restart of FF11

After updating Firefox 10.0.2 to FF 11.0, both of my PC's personas that I have will not stay enabled after restarting FF 11.0. I have tried different personas on each PC and they also will not stay enabled after a restart of the browser. FYI, I am still using the same extensions that I had used in FF 10.0.2 and there all up to date in FF 11.0, it's just this persona issue that bug me big time.
I've tried all the Knowledge Base help suggestions, but none have worked.
Any one else having this issue? Any on have a fix that worked?
Help!

The installed personas and the currently selected persona is saved as a pref in the prefs.js file in the Firefox Profile Folder, so there may be a problem with that file.
See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

Why does keyboard work only after restart

This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideas

connected via usb/wacom... software=10.5.8
thanks

Saving chart data and reload after restart of server?

Hi
I have a vi that communicate with another program called EES through DDE and sometimes EES mess up the server. My solution is to automatically restart the server once a day [this is good enough for me].
My question is: How do I get all my data in my charts to save and reload easiest?

Hi,
I think you may create a database table in your server and then pass your data to this table every time a new entry is made and calling the same from the database every time you run the VI after its restart. This can easily be done using the database connectivity tool-kit in the function palette.
Regards,
Nitz.
(Kudos are always welcome)

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

Macbook Pro 2011 boots to Recovery disc or bootcamp only after successfully installing bootcamp on Mt Lion 10.8, the 3 harddiscs are there, but selectin Mac HD will boot to recovery disc

On my Macbook Pro 13.3" mid 2011 model, with Lion and bootcamp, upgrading to Mountain lion 10.8 hung for the whole night. It failed to boot up, I was panic, reinstall the OS in the hope it will repair the boot disc, but it locked up the macintosh HD.
I rebuilt OS without bootcamp from backed up image (Lion) then upgraded to Mountain lion, no problem at all. Used it for a couple of days, then installed bootcamp and restored the Windows 7 image from the backup. It's completed without any problem. It can boot up in Windows 7 and I changed startup disc in control panel to Mac HD, it can only boot from the recovery disc. Holding down the option key will show the 3 hard discs: Macintosh HD, Windows and Recovery 10.8, but selecting Mac HD always boots up by recovery disc. I have use disk utility from recovery disc to verify and repair Macintosh HD to no avail.
If I use only mountain lion, it will be OK.
Has anyone experience the same problem? Thank you.

http://www.youtube.com/watch?v=QaDMbmsRqkQ

Why are "gets" performed only through the primary?

Say, I have a partitioned cache -- two JVMs (JVM1 and JVM2) and two objects (A and B) such that A is primary on JVM1 and backup on JVM2 and B is primary on JVM2 and backup on JVM1.
When a client-application on JVM1 performs a "get" to get B, why is the data fetched from JVM2 (i.e. the primary of B)? Why isn't the data fetched from the backup of B which is also the same JVM (JVM1) that the client-application is on?
Is it because "gets" like "puts" get queued? If so, do the gets get queued in the same queue as the puts?

962776 wrote:
Say, I have a partitioned cache -- two JVMs (JVM1 and JVM2) and two objects (A and B) such that A is primary on JVM1 and backup on JVM2 and B is primary on JVM2 and backup on JVM1.
When a client-application on JVM1 performs a "get" to get B, why is the data fetched from JVM2 (i.e. the primary of B)? Why isn't the data fetched from the backup of B which is also the same JVM (JVM1) that the client-application is on?
Is it because "gets" like "puts" get queued? If so, do the gets get queued in the same queue as the puts?The backups do not service requests because they would possibly respond with stale data, and also because during failover after node failures the backup may not exist at all or have partial data, or are simply being recreated in a new place.
Also, before 3.5 backups could even be in a partially updated state in certain time points as multi-entry operations in the same cache the entries were backed up independently, which would make multi-entry reads much more complicated or even impossible to correctly service from the backup.
Best regards,
Robert

Why do my input languages get reset to U.S. only after restarting?

I'm using an English Canadian keyboard on Mountain Lion, and every time I restart it gets reset to U.S. only. My Swedish and Canadian input sources completely disappear. Never had this problem until I upgraded to 10.8.2.

I have the same problem. I've tried to setup language preferences under root user but it didn't help.

IPhone syncs/charges only after restart

Hello. I am having some troubles getting my iPhone to sync or charge when connected to my iMac G5.
The phone will not sync, iTunes doesn't recognize that it is connected, AND it will not charge at all. I can plug it in and unplug it as many times as I want. The only way to get the phone and computer to sync/charge the phone again is to restart the iMac, log-in, and then plug the iPhone back in - then everything works great again for 1 more sync/charge session. If I unplug the phone from the iMac, I have to restart again before my next sync/charge. It has been like this since I upgraded (clean install) to Leopard on the iMac.
Any ideas? Thanks!
Also, after I restart and log-in I have to start iTunes before plugging in the iPhone otherwise iTunes never automatically launches with the phone is plugged in.
iMac G5, Leopard 10.5.1 (Clean install), iTunes 7.6, iPhone 8GB 1.1.3

Not sure if this has anything to do with the new download, but Thursday I downloaded the '08 updates (yeah...I am slow getting to it), anyway... while I was downloading the updates my phone of course was charging from the computer. After the download was finished I turned my phone off and plugged the phone into the wall charger. Charged fine... well last night (Saturday) I had to recharge my phone, but once I connected my phone to the wall charger it would not respond and/or start charging. Tried to plug it into the computer and it said my USB port was overloaded. I was ticked... needless to say I tried again this morning with no luck. Left my phone off for a few hours still nothing. Called tech. support and the guy asked me to try it again on the computer and read what the error said to him.....low and behold it started charging... on the pc and then on the wall charger. I have no idea why it started to work. I was happy it did, but has anyone else had this issue?

Drives no longer mount - Only after restart do they mount

Upgrade to from 10.4 to 10.5 and ran all updates...currently have 10.5.4. My external drives no longer mount when i plug them in via usb port. Worked perfectly before upgrade. Additionally my ipod wont mount either. They dont show up in disc utility either...However if i have these devices plugged in with the computer turned on (and they aren't mounting) and i restart my computer then when it boots up again they mount and function just fine. but if i unmount and turn them off and turn them back on...they dont mount.
any suggestions?

Hi grant862
I seam to be having the same issue. I have a number of Flash cards and a flash card reader, well tow card readers actually. I cant get the cards to mount. I have tried swapping usb cables and card readers. I have tried both readers in all my USB ports (17" Mac Book - 10.5.4). The only way that I can get them to mount is if I plug the cards back into the cam,eras an connect them. I think there is a software glitch somewhere. I don't think its the usb ports as I have tried keyboards and mice connected via these ports with no issue. I don't expect an answer to this, but Grant - if you are still out there - I wanted you to know you weren't alone. I am going to try re-installing the 10.5.4 combi download and see what happens. Oh yes and 'repair permissions' (which I have already done once...) but am beginning to think that this is just a bit like saying a mantra as a way of calming me.
...Ohmmm madhi padhi ohmmm....

Stubs are getting deleted when we restart the weblogic server

Hi All,
We have a EJB jar file Before deploying changed EJB jar, we delete the existing jar from server and consol when we upload the jar using the upload option from admin console of weblogic 8.1 server, then EJBs deploys properly and works fine.
When we print the remote object class name will get System.out.println("Object "+obj.getClass().getName());
output -> CnClaimsFacade_wayy6d_HomeImpl_814_WLStub
However, if i stop the server and start again, the EJB stubs are not created this time and the application does not work.
When we print the remote object class name will get System.out.println("Object "+obj.getClass().getName());
the object class name prints as output -> "CnClaimsFacade_wayy6d_HomeImpl"
Has anyone faced this before?? Pls let me know the reason...
Thanks in Advance!
Chandra

I guess the right place would to be consult Weblogic docs/forums:
http://www.weblogic.com/docs/techoverview/rmi.html
http://forums.bea.com/bea/forum.jspa?forumID=2030

Curious about "Recovered Files" after restart

Is there a way to find out the source of recovered files and what they mean? Just curious.
My latest were:
A folder: <msoclip>
A folder: <CardModeFiles>
Thank you.

Recovered items appear when a program that creates temporary files either crashes or does not clean up after itself properly. The Mac OS cleans the files up and puts them in this folder. This is an old apple tech note, but it is still valid:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2267.html
I think msoclip comes from some Microsoft software. I don't know about the CardModeFiles thingy. You can safely delete these files.
charlie

Instances In recovery are getting recovered only after restart of server.

Similar Messages

Maybe you are looking for