Instant Client, Crystal reports

Disclaimer: I'm not a programmer.
We are trying to use Instant Client with our Windows 7 deployment. We have an application that apparently uses the Crystal reports driver; p2sora7.dll (version 8.6.1.50) to retrieve information. When we use Instant client to run this report, we get a message that says:
Title bar "Crystal Report Viewer"
Message: "Server has not yet been opened".
With the Full Oracle Client, the error does not happen and the report is shown properly.
Any idea whay could be causing this?
Thank You

That's hard to say.
Did you look at the documentation of Crystal Reports to see what they support and how to set it up?
What I'd do is make sure that the Instant Client is installed correctly, that the directory is in the PATH, that no other Oracle software is on the machine, that all environment variables are correct.
One easy test is to use the Instant Client's "sqlplus" to connect to a database.
If that works, the setup is probably ok.
You used the same version of full client and Instant Client, right?
Yours,
Laurenz Albe

Similar Messages

  • Crystal Report menu-item not visible on SAP menu of client

    SAP 2007A SP:00 PL:38
    Crystal Report 2008 (on start menu)
    Crystal Report 2.0.0.6
    1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
    2. Installed Crystal Report on one of the clients and it works fine in same way.
    3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5  run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
    a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
    b) However, in Add-on Manager, Crystal Report does not show at all.
    c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
    d) OS is Microsoft XP.
    How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
    Thanks, Ajay Audich

    Hi,
    1) On Add-Remove Programs on the client, I see the following:
    Crystal Reports 2008 Runtime
    Crystal Reports Basic 2008 for SAP Business One
    Microsoft.NET Framework 1
    Microsoft.NET Framework 2.0 Service Pack 2
    Microsoft.NET Framework 3.0 Service Pack 2
    Microsoft.NET Framework 3.5 SP1
    SAP Business One Crystal Reports 2.0.0.6
    2) The settings are:
    Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
    User Preferences Tab-User RT-Preference is set to Default.
    On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
    However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
    3) The user RT on the client is a super-user.
    Thanks.

  • Installing windows application with crystal reports runtime on 64 bit

    I have a windows application created on 32 bit windows xp platform using visual studio 2005 with oracle 10g as database and crystal reports XI as reporting tool. The platform on which the application was created has Oracle 10g 32 bit Client, Crystal Reports Developer XI R2 and Crystal Reports XI Server Client. The application has to be installed on 64 bit Windows 7 machine. The application fails with following error
    An error has occured while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist.msi) containing correct version of Crystal Reports runtime (x86, x64, or Itanium) is required. Please go to http://www.businessobjects.com/support for more information.*

    We have an Windows Forms apps developed in VB.NET 2005 using Reports Documents from Crystal Reports XI R2 Server. The application is running fine on 32 bit Windows XP machine. We are trying to install the application on 64 bit Win 7 machine. We are getting following error while doing so
    An error has occured while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient or Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist.msi) containing correct version of Crystal Reports runtime (x86, x64, or Itanium) is required. Please go to http://www.businessobjects.com/support for more information.*
    We have installed "Crystal reports XI R2 SP4 full build" and "SP6 incremental". We have also installed "CrystalReports11_5_NET.MSI from CR XI R2 FP 6.4 .NET Server Install" as well as "CRRedist2005_X64.msi".
    We are still getting the same error.

  • Having trouble opening Crystal Report files from a document library

    I am trying to open Crystal Report .rpt files from a document library in either the native, client Crystal Reports software or in Crystal Reports Viewer. When I add the Crystal Report files to a document library and attempt to open them SharePoint displays
    a prompt asking me to save the file locally instead of opening the file. I have done a lot of research online and found several sites discussing similar scenarios, however, I have not been able to get these solutions to work. Here is a short list of sites
    I have referenced for possible solutions:
    http://naadydev.blogspot.com/2013/03/crystal-report-viewer-sharepoint-2010.html?showComment=1383339860122
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/52aabf2d-10dc-424c-bd50-124fc972a9b9/crystal-report-viewer-integration-with-sharepoint-2010?forum=sharepointgeneralprevious
    http://www.codeproject.com/Articles/42731/Crystal-Reports-WebPart-for-SharePoint
    Here are the steps I have done to try to get the .rpt files to open:
    Added the Crystal Report extension .rpt as a MIME type
    Installed the Visual Studio 2012 Crystal Reports Viewer toolbar
    Installed the 64-bit Crystal Reports runtime
    I have also created a solution file based off the Code Project site which partially works, but not quite right. In this project I have created a document library called "Crystal Reports rpt Files" and deployed the solution file to a site. When
    I open the Web Part Maintenance Toolbar I can see the selected .rpt file in the drop-down, but no Crystal Report file is displayed on the page itself.
    I am not sure what I am doing wrong. Does anyone have experience working with Crystal Reports and SharePoint 2013 (or earlier versions) that could lend some advice?
    Thank you,
    Alex

    We are having the exact same issue, has anyone resolved this yet?

  • Error while executing Crystal report in client computers

    I got this error message -2147206460 Crystal Reports Activex Designer invalid directory. any idea guys how can i fix this. I tried using Crystal Report viewer in the server and its working perfectly.
    thanks

    Michael Litiatco 
    is your report working on SAP from server machine or it only works on Crystal Report on server machine
    IF your report is working  on SAP server then, the problem is on sharing the .rpt file with client
    Place the .rpt file in shared folder whichi is accessable from all the clients then use that .rpt file in SAP CR addon and update it
    updating the path from each client system SAP towards shared .rpt file
    do you have any firewall installed, try disabling within your network and check
    This should Fix your problem
    make sure the printer is shared and correct printer is set as default printer
    if possible give a test print page from client to make sure the printer is online
    Regards
    Krish

  • SAP 8.8 Crystal Report Layout problem in client workstation

    Hi Experts,
    We have import crystal report to SAP Business One as Form Layout or AP Invoice. We have already created the token DocKey@ so it would automatically be printed and will not ask for the document number. The layout works fine using the server workstation but in the client workstation we cannot proceed with the printing because when we click on the preview button, a login window appears with this details:
    Database Login
    Server Name : gray out or not active
    Database: gray out or not active
    Login ID: active
    Password: active
    We tried to enter the SQL login but fails.
    Is there any components that we need to install in the workstation before it could function the same way as PLD?
    Thanks,
    Janice

    You can try creating the ODBC connection, which is the same as on the server.
    Assuming this is the scenario:
    1. You write the invoice using crystal report on the server
    2. On the server, Control Panel--> ODBC, you have created an ODBC link eg; SAPB1.
    3. The report is connecting to ODBC link and pointing to database OECUS
    On the client workstation, you need to create:
    1. Control Panel--> ODBC, you need to create an ODBC link as on the server.

  • Crystal report not working on a client pc

    Hi Everyone,
    I have developed windows application in vb 2012 which will bind data from ms access in crystal report. My windows application is running fine on local machine where i installed vs2012 but when i create a setup an installed it on the local machine it is giving
    this error
    'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine error
    and when i install on a client machine it is giving me the following error,
    System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw
    an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the
    file specified.
       at CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor()
    Anyone faced same error ?? Please suggest.

    Also for 3rd party software usually contacting the vendor for assistance is recommended. Especially since Crystal Reports are not supported by Microsoft. The search engine or appropriate forum at the below link should be able to assist you.
    SAP Crystal Reports, version for Visual Studio
    Please BEWARE that I have NO EXPERIENCE and NO EXPERTISE and probably onset of DEMENTIA which may affect my answers! Also, I've been told by an expert, that when you post an image it clutters up the thread and mysteriously, over time, the link to the image
    will somehow become "unstable" or something to that effect. :) I can only surmise that is due to Global Warming of the threads.

  • Crystal report printing in client side

    Hi ...
    I have using asp.net web app with crystal report version 10.5.3700.0
    I have uploaded the project and database in the below link. Check out.
    http://www.2shared.com/file/vHTSGl13/ASPnet_Webapp_using_CR_Rpt_Pri.html
    http://i52.tinypic.com/2rdds7d.jpg
    I have few requirement in the crytsal report asp,net page:-
    1) If user click Print button of crystal report viewer toolbar then it goes to PDf then its show me all of my pages instead of showing me the current page on which i click print.
    2) I want to use client side print..if user click on a my print button then i need to show print dailogue like image above in that if user click print then i need to print that current page.. let us consider im viewing I3 Invoice number using Crysatl report viewer Navagition then it show me as 3/7 in toolbar if user click on my print button then i need to print the page 3 only.. coz user clicked print on Page3.
    3)My asp.net web app is in Hosting server if user click my print button then i need to show client print dailogue and it will show my cleint connected printer. Here crytsal report toolbar and other things should be hide. It should be like what we have designed in crystal report that alone should be get printed.
    4) One more thing i want is if user gives I4 invoice no. in my textbox1 then click view report button then it will show that Invoice Report now its shows two pages, here if user click print then i need to print two pages coz it has two pages...
    Please do a code using my webapp which is above and waiitng for your codes..
    Thank you
    Note: please do a code so that i can know, i already visited some of the website like http://aspalliance.com/ i didt undertstand how to do so im posting here to get a code.

    *i tried this also but it show me the same only hosting server printer not a client side printer*
    if (System.Drawing.Printing.PrinterSettings.InstalledPrinters.Count > 0)
                foreach (String myPrinter in System.Drawing.Printing.PrinterSettings.InstalledPrinters)
                    cboCurrentPrinters.Items.Add(myPrinter);
                cboCurrentPrinters.SelectedIndex = 0;
            //For printers exposed to System account as per MS Kbase
            //http://support.microsoft.com/default.aspx?scid=kb;en-us;184291
            //Look to HKEY_USERS\.Default\Software\Microsoft\Windows NT\CurrentVersion\Devices
            Microsoft.Win32.RegistryKey mySystemPrinters =
                    Microsoft.Win32.Registry.Users.OpenSubKey(@".DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Devices");
            foreach (String defaultPrinters in mySystemPrinters.GetValueNames())
                cboDefaultPrinters.Items.Add(defaultPrinters);
            if (cboDefaultPrinters.Items.Count > 0)
                cboDefaultPrinters.SelectedIndex = 0;
    help me in this.. its very urgent needed..

  • Crystal Reports Runtime 13 not found in sequence on App-V 5.0 SP2 Hotfix 5 client

    My application uses a VFS installation of Crystal Reports Runtime 13. (i.e., the path to CR13 isn't specified as the Primary directory during sequencing, as my app uses that particular path)
    On a test VM with an old App-V client (5.0.285.0) the application launches and can locate CR components successfully.
    However, when we upgrade to the latest App-V client (SP2 HF5) the application fails to find CR.
    The original application was sequenced with App-V 5.0 RTM (5.0.285.0). I've re-sequenced the app with the latest sequencer (SP2 HF4) but the error persists.
    There is literally nothing in the Event Log and the app doesn't appear to report the error to Windows (it pops up a UI message saying CR 13 can't be located).
    Procmon doesn't show anything meaningful, although I could have missed something whilst trawling through 16,000 lines of processes.
    I enabled all App-V logs and nothing relating to an error can be found there.
    I tried disabling DEP and following other advice in this earlier thread:
    virtualizing-business-objects-crystal-reports-pro-110
    OS: Windows 7 SP1, patched up to date.
    App-V client: 5.0.3404 (SP2 Hotfix 5)
    Anyone seen an issue like this?
    I'm about to open a case with Microsoft Support, just thought I'd ask here first.
    Regards.

    Hi.
    We raised a support ticket with Microsoft and with their help, found that the path length to the VFS installation of Crystal Reports was the issue.
    I created an MST (btw, Crystal Reports MSI has numerous directory and registry entries that don't use best practice, so this took a while..) to reduce the path lengths.
    As to why the RTM version of the client works (from our Microsoft support engineer):
    "Regarding the “why”, between RTM and the next versions, lots of issues were corrected.
    In this particular situation, the issue was related with the fact that the application stopped extending the buffer. Probably what happened was that a COM or Object Bug was corrected between RTM and SP2 and this had a negative effect on the application. What
    this means is that, in fact, the application was not supposed to work in RTM as well, due to buffer being extended."
    So in summary, if you have an application with a particularly long path structure, you may need to re-sequence for the SP2 version of the client.

  • Error Loding Crystal Report in Client Machine

    I have developed a windows application using vs2010 c# and also generated crystal report using the application.The problem is I
    am able to view report on my computer but when the same application runs on a client machine its throwing an error "could not load file or assembly crystaldecisions.windows.forms version 13.0".I am not able to load the report on client machine.What
    could be the possible reasons for the error.Any suggestions would be of great help? Thanks in advance

    Hello,
    This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Crystal Report Viewer on Client Machine

    Hi all,
               I am new to Crystal Reports. I want Open the crystal Report from SAP Interprise Portal. I want to know the Crytal Report viewer needs to be installed on client machine or without that also we can show the report. Thanks for your support in advance.
    Thanks & Regards
    Sivaramakrishnan V

    Hi,
    If you have any issues with Crystal reports .Net SDK's then please post your questions in [Crystal Reports .NET SDK forum|SAP Crystal Reports, version for Visual Studio;.
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all .NET SDK queries remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    In order to run the reports on the server where Crystal Reports is not installed, you need to install the runtimes of the Crystal Reports on the server.
    Runtimes of Crystal Reports contains all the requiered dlls of CR to run the reports where CR in not installed.
    Link to download CR runtimes - click [here|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
    The Wiki [here|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0] is currently the best resource for CR.NET Runtime information.
    Hope this will help!!
    Amit

  • Load report failed(crystal report) in client pc.

    Hi,
    we are getting error in crystal report
    1.Load report failed.See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
       at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
       at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
       at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
       at System.Windows.Forms.Form.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    SAP_CR
        Assembly Version: 2.0.0.6
        Win32 Version: 2.0.0.6
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/SAP_CR.exe
    Interop.SAPbouiCOM
        Assembly Version: 8.0.0.0
        Win32 Version: 8.0.0.0
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.SAPbouiCOM.DLL
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    CustomMarshalers
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
    Interop.CR_Crypto
        Assembly Version: 6.0.0.0
        Win32 Version: 6.0.0.0
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.CR_Crypto.DLL
    System.Data
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Transactions
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
    System.EnterpriseServices
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
    CrystalDecisions.Windows.Forms
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
    CrystalDecisions.Shared
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Shared/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
    CrystalDecisions.ReportSource
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportSource/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
    CrystalDecisions.CrystalReports.Engine
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/12.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
    System.Web
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
    CrystalDecisions.ReportAppServer.CommLayer
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CommLayer/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
    CrystalDecisions.ReportAppServer.ClientDoc
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ClientDoc/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
    CrystalDecisions.ReportAppServer.DataSetConversion
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
    CrystalDecisions.ReportAppServer.DataDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.DataDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
    CrystalDecisions.ReportAppServer.Controllers
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.Controllers/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
    CrystalDecisions.ReportAppServer.CubeDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.CubeDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
    CrystalDecisions.ReportAppServer.ReportDefModel
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.ReportDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
    BusinessObjects.Licensing.KeycodeDecoder
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.0.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/BusinessObjects.Licensing.KeycodeDecoder/12.0.1100.0__692fbea5521e1304/BusinessObjects.Licensing.KeycodeDecoder.dll
    CrystalDecisions.ReportAppServer.XmlSerialize
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.XmlSerialize/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.XmlSerialize.dll
    System.Web.Services
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
    CrystalDecisions.Enterprise.Framework
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.0.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.Enterprise.Framework/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.Framework.dll
    CrystalDecisions.Enterprise.InfoStore
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.0.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.Enterprise.InfoStore/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.InfoStore.dll
    CrystalDecisions.Enterprise.Viewing.ReportSource
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.Enterprise.Viewing.ReportSource/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.Viewing.ReportSource.dll
    CrystalDecisions.Web
        Assembly Version: 12.0.2000.0
        Win32 Version: 12.0.2000.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/CrystalDecisions.Web/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Web.dll
    CrystalDecisions.ReportAppServer.Prompting
        Assembly Version: 12.0.1100.0
        Win32 Version: 12.0.1100.683
        CodeBase: file:///C:/WINDOWS/assembly/GAC/CrystalDecisions.ReportAppServer.Prompting/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Prompting.dll
    Accessibility
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    2.Error:could not load file or assemble crystal decisions.windows.forms,version=12.0.2000.0,culture=natural,public key token=692fbea5521ea1304' or one of it's dependencies.the system cannot find the file specified please help me solve this problem.some client pc there is no problem we installed all related to Crystal reports and merge modules and 2.8 managed files.
    regds,
    sampath.

    Hi Sampath,
    did you have this error only on clients pc or also on the server when you launch the report from Sab Business One? If only on clients did it occur on all clients?
    Iris

  • Issue in crystal reports in client machine

    my project is running fine on development machine where i have installed visual studio 2013 and i later installed CRforVS_13_0_10 to add crystal reports feature ... i developed an application and used sql server for database ...
    when i run this software on client pc , my project is working fine except crystal report , when i want to view crystal report it gets busy in loading crystal report later it gives message
    "Failed to open the conenction , Details : [Database vendor code: 17] temp_ ....."
    on client machine i have installed CRRuntime_32bit_13_0_9

    i think i caught my problem but could not able to solve yet , my issue is that in development pc i set database of crystal report by selecting proper database linked to sqlserver ...
    later when i run my project in some other pc (i change pc name in my app.config file),
    and then the project runs but not crystal reports
    crystal report does not find database as its pc name is different , whereas pc name which is hard coded is the name of development pc ...
    how to change this pc name ????

  • Crystal report viewer do not show on client computer installation

    hi
    hope all you are fine
    i develop a simple project that show "Hello word My First Crystal Report" on crystal report viewer. after this i add new project "setup and deployment". In Setup Project I add 4 files of .msm for show crystal report.
    1. CRRuntime_13_0_tr.msm  2. Microsoft_VC100_ATL_x86.msm
    3. Microsoft_VC100_CRT_x86.msm
    4. Microsoft_VC100_MFC_x86.msm 5. Microsoft_VC100_OpenMP_x86.msm
    when i install on developer computer. it runs successfully. when i install on client computer, software runs fine but crystal report did not show and having error "METHOD NOT FOUND VOID CrystalDecision.WINDOWS.FORMS.CrystalREPORTViewer.SET_CACHEDPAGENUMBERPERDOC(INT32)"
    i install .net frame work and CRforVS_13_0_9.exe on client computer but .net frame work show form but crystal report did not show. 
    Please Help

    Hello,
    For Crystal repot related question ,please consult on SAP Crystal report forum instead of here.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Installed BOE XI R3.1 Client tools now I cant open crystal reports?

    After I unistalled the client tools I cant open Crystal Reports from local drives. I can from BOE, but not local or network drives. Plus all the Icons from these drives have been removed. What did I do wrong?

    Need more info and it's not clear what you did or what is left on your PC but typically which ever CR product you still have installed going to the Add/Remove software and doing a Repair install on Crystal Reports Designer should fix the problem.
    Thank you
    Don

Maybe you are looking for

  • Cannot view image info in iPhoto '11

    Pressing the info button once highligts it, and pressing it twice opens the panel with linen background but it's empty. iPhoto also slows down or seems to hang after doing this. Otherwise, iPhoto seems to work properly. Repairing iPhoto permissions a

  • External JavaScript Editor

    I'm curious which external JavaScript Editor others use? I use PSPad, which has lot of nice features, but I don't have a syntax highliter and clip/autocomplete for all the Acrobat JavaScript methods. Is there a simple list of all these methods availa

  • Black screen of death in Flash CS4

    Hi everyone, first time poster here, so please bear with me if this has already been asked - I can't seem to find anything on the forum, or on google, so I wonder if anyone can help me. I've had this problem for a while, and I'm not sure what's at fa

  • HT5622 "ipad not backed up" it make locked to my screen, even OK not respond. How to remove this information?

    "ipad not backed up" it make locked to my screen, even OK not respond. How to remove this information?

  • My greenscreen effect will no longer work.

    When I add the greenscreen effect to any background then try to play it....the background disappears and there is just the greenscreen image surrounded with black. Any idea? Green Screen WAS working...and today, it won't...