Instantclient and port randomness

I am able to get instantclient 10.2.0.2 & sqlplus communicating with our turnkey human resources Oracle database. The sever that instantclient and sqlplus are installed on runs VMware EFX and I am running RH 3.0 ES in a VM.
The tnsname.ora file has port 1521 defined are the port for communicating to the database.
The firewall admin has noticed that port 1521 and some random ports are being used during this communication process. If the firewall admin restricts the communication to only port 1521, my sqlplus session is unable to communicate with the database, I receive timeouts.
Since none of us is Oracle trained we are unsure what is causing the use of the random ports.
Is it caused by the Vmware or is there something I can configure withing the instantclient so
that it only uses specific ports.
Thanks
Peter

Raymond,
We recommend that you install Instant Client into its own directory. That does not preclude you from having Oracle Homes and Instant Client on the same hardware. In the 10.1.0.3 version of Instant Client, in Windows, Environment Variables take precedence over the Registry Variables. I hope that helps!

Similar Messages

Some ports randomly get blocked and the external program is unable to rece

We have configured few ports to send out Idocs using TRFC mechanism. Initially all the ports are working fine and the external program is able to receive Idocs from all the ports. However after sometime, some ports randomly get blocked and the external program is unable to receive Idocs from these ports. If the SAP instance is restarted, we see that all ports work fine for a certain period but the same issue appears again after sometime.
This behaviour is observed in case of TRFC calls but not for normal RFC calls.
RFC Connections,partner profiles,ports,distribution model - these all are working fine.
Your help will be appreciated.
Thanks in Advance,
Madhav

Hi,
The host serevr details may be changed. Please check with the respective team for the proper host details.
Check this link. It may help:
Re: Regarding Providing FTP connection from R/3
Regards,
Swarna Munukoti
Edited by: Swarna Munukoti on Oct 16, 2009 8:17 AM

Defining both the sender both the receiver IP and ports

Hello guys, i need help.
My aim is to develop an app that can send UDP packets over the network to the specified IP address and port number, and just now no problems.
Using DatagramSockets and DatagramPackets i'm able to achieve this part.
The real problem is that i need to display in the UDP sent the IP address of my machine and the port number i want and not a random port number.
Is it possible?
if so, how?
thanks in advance for the help
Gio-Kun

DatagramSocket allows you to set a port (and optionally: an InetAddress), which specify the port and IP to use on the sender.
DatagramPacket allows you to set the same for the receiver.
What am I missing?

USB ports randomly dies..

On my Dell Precision M4500 laptop im having the issue that the USB ports randomly dies, the only way to use again the USB ports its to reboot the system, when this happens, dmesg shows:
[53929.040749] ehci_hcd 0000:00:1d.0: fatal error
[53929.044636] ehci_hcd 0000:00:1d.0: HC died; cleaning up
[53929.047385] ehci_hcd 0000:00:1d.0: force halt; handshake ffffc90000c2c024 00004000 00004000 -> -110
[53929.047386] ehci_hcd 0000:00:1d.0: HC died; cleaning up
After this, nothing that gets plugged on the USB port works..

I have the same problem for months ago, now. I haven't found anything about this, I tried some forums but nobody couldn't help, so I decidet to try here (my English is not so good), and I found this topic. The problem appears on my girlfriend's notebook (with Arch Linux, of course), too.
Sometimes if I try to connect something via USB, it's just not working, but the already connected hardvares have no problem until they're plugged in, except the Bluetooth adapter. Have to reboot to make everything work, but the problem occurs many times a day randomly.
I have no error message in any log and the lsusb says that the connected devices are the ones that were connected before the problem occured, regardless of what's plugged in and what's not.
Here is my everything.log, the output of dmesg | grep usb and lshw.
Last edited by freyr (2012-05-12 14:37:41)

Macbook Shuts Down And Restarts Randomly?

Hi Guys
I have a Macbook Aluminum late 2008 that shuts down and restarts randomly.
I have a error report but i don't understand it.
Hoping someone could help.
Thanks
Anonymous UUID:       414A2CBB-CC3A-EB29-305A-2EFF15C2DC8A
Sat May 24 23:11:59 2014
panic(cpu 0 caller 0xffffff80072dbf5e): Kernel trap at 0xffffff800755fb1c, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x00007fbb5a626038, CR3: 0x00000001318a6000, CR4: 0x0000000000000660
RAX: 0xfffdff801879a030, RBX: 0xfffdff801879a000, RCX: 0x0000000009000000, RDX: 0xffffff801233cdf0
RSP: 0xffffff809a293b70, RBP: 0xffffff809a293bb0, RSI: 0x00000000000ee904, RDI: 0xffffff801233cdf0
R8: 0x0000000000000000, R9: 0x0000000000008990, R10: 0x0000000000002000, R11: 0x000000000000080e
R12: 0xffffff801233cdf0, R13: 0x00000000000ee904, R14: 0x00000000000ee904, R15: 0xffffff801233c808
RFL: 0x0000000000010286, RIP: 0xffffff800755fb1c, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00007fbb5a626038, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8073c36c50 : 0xffffff8007222fa9
0xffffff8073c36cd0 : 0xffffff80072dbf5e
0xffffff8073c36ea0 : 0xffffff80072f3456
0xffffff8073c36ec0 : 0xffffff800755fb1c
0xffffff809a293bb0 : 0xffffff8007556c9c
0xffffff809a293da0 : 0xffffff80073ff9ec
0xffffff809a293e50 : 0xffffff80073ed716
0xffffff809a293f50 : 0xffffff8007640653
0xffffff809a293fb0 : 0xffffff80072f3c56
BSD process name corresponding to current thread: com.apple.WebKit
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:     0x0000000007000000
Kernel text base: 0xffffff8007200000
System model name: MacBook5,1 (Mac-F42D89A9)
System uptime in nanoseconds: 11581223082454
last loaded kext at 6725123152742: com.apple.driver.AppleIntelMCEReporter          104 (addr 0xffffff7f89550000, size 49152)
last unloaded kext at 6882076962628: com.apple.driver.AppleIntelMCEReporter          104 (addr 0xffffff7f89550000, size 32768)
loaded kexts:
com.apple.filesystems.msdosfs          1.9
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AGPM          100.14.15
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.2.4f1
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleHDA          2.6.1f2
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMikeyDriver          2.6.1f2
com.apple.GeForceTesla          8.2.4
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleUSBHub          666.4.0
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.nvenet          2.0.21
com.apple.driver.AppleUSBOHCI          656.4.1
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          217.92.1
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          217.92.1
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.AppleGraphicsDeviceControl          3.5.26
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.6.1f2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.7fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.AppleHDAController          2.6.1f2
com.apple.iokit.IOHDAFamily          2.6.1f2
com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
com.apple.iokit.IOSurface          91.1
com.apple.iokit.IOBluetoothFamily          4.2.4f1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.4f1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginFamily          5.7.0d11
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.AppleSMC          3.1.8
com.apple.driver.AppleUSBMultitouch          240.9
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          677.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 4 GB, SMC 1.40f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK1653GSX, 160.04 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Cruzer Blade
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Microsoft® Nano Transceiver v1.0
Thunderbolt Bus:

Disconnect the: USB Device: Cruzer Blade
See if that helps.

Visual Voicemail gone after upgrade to 2.0 (and porting number)

Anyone else experience this? I upgraded to 2.0 and at the same time I ported the old iPhone to another cell phone number on my account with ATT. The upgrade to 2.0 and porting appeared to go OK as everything else is working EXCEPT when on the phone application, I can not get the visual voicemail button to do anything. I press it and it acts like it is taking some time to open but it never brings up the visual voicemail screen. The phone part works as usual in all other ways.

I upgraded to the pre-release version of 2.0 and it worked fine. Then this morning i tried to update to the official 2.0 and it could not connect to iTunes, and that pinwheel kept spinning. So I pressed home button and power button until it (iPhone) rebooted. Then i connected it to iTunes and it asked me to restore.... So i pressed the option key (in mac, idk what it is in windows) and selected the prerelease version to downgrade to and now its fine. So...... good luck all

Coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpA

Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
    at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
    at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
    at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
    at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
    at coherence::component::util::Initiator::openConnection
    at coherence::component::net::extend::PofConnection::open
    at coherence::component::util::TcpInitiator::openConnection
    at coherence::component::util::Initiator::ensureConnection
    at coherence::component::net::extend::RemoteCacheService::openChannel
    at coherence::component::net::extend::RemoteService::doStart
    at coherence::component::net::extend::RemoteService::start
    at coherence::component::util::SafeService::startService
    at coherence::component::util::SafeService::restartService
    at coherence::component::util::SafeService::ensureRunningServiceInternal
    at coherence::component::util::SafeService::start
    at coherence::net::DefaultConfigurableCacheFactory::configureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureService
    at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
    at coherence::net::DefaultConfigurableCacheFactory::configureCache
    at coherence::net::DefaultConfigurableCacheFactory::ensureCache
    at coherence::net::CacheFactory::getCache
    at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
    at _onexit
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
    at BaseThreadInitThunk
    at RtlInitializeExceptionChain
    at RtlInitializeExceptionChain
    on thread "main"
Caused by: coherence::io::IOException: socket disconnect
    at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
    at coherence::net::Socket::readInternal
    at coherence::net::Socket::SocketInput::read
    at coherence::io::BufferedInputStream::fillBuffer
    at coherence::io::BufferedInputStream::read
    at coherence::component::util::TcpInitiator::readMessageLength
    at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
    at coherence::component::util::Daemon::run
    at coherence::lang::Thread::run
    on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"

We are facing same issue.    Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
              <protocol>Tls</protocol>
              <local-certificates>
                <certificate>
                  <url>c:\Cert\</url>
                  <password>password</password>
                  <flags>DefaultKeySet</flags>
                </certificate>
              </local-certificates>
            </ssl>
thanks
Bala

How to determine which IP address and port is used to make DNS queries?

I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.

I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.

FF keeps defaulting to the wrong HTTP proxy server and port. I have to change it every time I attempt to open Firefox? How do I change it for good?

The manual proxy settings keep defaulting to the wrong HTTP and port. This has caused me many hours of anguish. It works fine when I correct the settings but after you log off and then come back it has to be changed again. Is there anyway to fix it? Or can I go back to the previous version because 4 definitely has some issues (other than this one). I could live with it if I had to but I'm not the only one who uses this computer and they don't know how to make the changes. Thanks and I would definitely appreciate an answer.

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor?

Web Service Proxy with Dynamic IP and Port

hi,
I am currently looking at the Web Service Proxy generation in JDev 11g. I can generate proxies fine, but the proxies are generated with static host and port. I want to substitute the host and port during runtime if required, for instance read the values from a database. I need to do this to avoid compiling the application for every deployment we make dev, test and production. Is there an easy way to set the generated proxy host and port? Are there any examples?
Thanks in advance!
Stephen

Hi,
Maybe you should have a look on XML Catalogs feature, but I am not sure if JDeveloper support it and how to support it.
-LJ

My trackpad and keyboard randomly become unresponsive on MBP Retina

I just got my Macbook Pro with Retina a week ago. Its the newest model that just came out the week I got it. Its a 13 Inch. I noticed when I am using it, the trackpad and kayboard randomly become unresponsive for sometime. I have to close it and wait for it to start working again. Do you have any idea what the problem might be. Should I contact Apple?

I went through this with my old Late 2008 Macbook Uni when I installed Kingston Value RAM.
Take your new RAM out - install your old RAM back - do a PRAM reset and see if your keyboard and trackpad are working again.
Once that's done - turn your Macbook off - install the new RAM - if keyboard and trackpad are unresponsive again - install different brand of RAM.
I ended up intalling Crucial RAM in mine.
Good luck.

Xbox 360/one problem and port forwarding

For a couple months now (since I got my AirPort Extreme) I have not been able to connect to a certain friend on xbox. I can connect to anybody else however. The only way we can (kind of) connect is if somebody else is host and we both connect to him.
My NAT type is Moderate. When I try to test my connection on my xbox it says that I can connect but I am limited in matchmaking (this is joining games and using voice chat, which is the problem named above for my particular friend). The xbox shows the error and suggests that I enable UPnP or open the port 3074.
The problem is that I have already have! I gave my xbox a static IP and forwarded the port 3074 to that IP.
(I have also tried forwarding all the ports that xbox live uses to the xbox. These being:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
as found on the xbox website... https://support.xbox.com/en-US/xbox-360/networking/network-ports-used-xbox-live
I made sure to put them in the right text boxes for UDP and TCP so that is not the problem either.)
I know that the AirPort Extreme does not support UPnP but does have a similar thing called NAT Port Mapping Protocol which was already enabled. (I tried all possibilities of enabling/disabling NAT...Protocol and port forwarding/not port forwarding.) --- This is not the solution as I see it
In short: My xbox tells me to open port 3074. I already have. It still tells me to open it and still won't work.
I posted this on the apple discussion page (instead of the xbox discussion page) because I know that it's not an xbox problem. When I had my old linksys router it worked perfectly.

I have this exact same question and problem. I know this doesn't help, but would appreciate any updated information if you find an answer. I'll keep working on this also and let you know if I find an anwer.

How to remove old USB printer drivers and ports from Windows XP and Windows 7

We have several instances of HP 4250 Printers connected as local USB printers. When trying to replace this model with a HP P4015n or HP 600 M602n the new models will appear to install but won't print. No error messages but sometimes they try to install with ieee 1284.4 support which would seem to be a parallel port type. We're trying to use the HP UPD PCL 5. I'm looking for a way to completely remove the old printer instances, drivers and ports. While the printer icons and drivers seem to be able to be deleted the USB printer ports can't be deleted. Then when I go back and try to install the new model printer it can only use he existing USB port. Again, when that happens the new printer won't print. So I'm trying to get a completely fresh start with the XP SP 3 and Win 7 OS before installing the newer models. I've tried several methods to clean the USB printers but the instructions are never detailed and most times something is missing and the OS needs to be reloaded. I thought that I would see if someone who knows HP USB printers has any ideas...

These seem to be a commercial products. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

My Iphone 4 32GB started having this issue when I downloaded the 2 last 6.1.X... VOICE CONTROL pops-up even when I sleep and calls random people just by the sound of the snoring... in FACETIME even more annoying. I confirm that it does this day and night

Turn off Voice Control.
Otherwise, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).

Instantclient and port randomness

Similar Messages

Maybe you are looking for