Instruction key in an invoice not taken

Hello!
I have a question concerning the instruction key.
I didnt define an instruction key in the vendor master data nor in the house bank.
And i dont want to define this instruction key in the master data, otherwise, it will come each time in the payment run.
Sometimes, we have to use the instruction key and sometimes not, that's why i dont want to define it in the master data.
But i define an instruction key in the invoice document for the vendor.
when i do the payment run, the instruction key of the invoice is not taken into account.
What should i do in order the system takes the insctuction key completed in the invoice document?
Thanks!
Kind regards,
Chiachen

Hi,
We have maintained the Instruction key in to vendor master and while downloading the by using the ACH for Canada, instruction key is missing.
Value is there in REGUH and not there in REGUP, how to get the same in to download file.
Help me on this issue.
Regards,
Satyam

Similar Messages

Complaint wth ref. to invoice in CRM - Copy control not taken into account!

Hi all,
We are facing problems when replicating return orders (business object Complaint) with reference to invoices in ERP.
The copy control in ERP is not taken into account. Does anyone know if it is possible to check the copy control when replicating the complaint to ERP with reference to the invoice?
The return order is being replicated correctly and the link to the invoice is shown (so, the flow is correct).
But:
1.- The manual pricing conditions in the invoice in ERP are not being copied in the return order.
2.- Some data as the 'Incoterms' is being redetermined from the customer master data and is not being copied from the invoice.
3.- Data related to material is also being redetermined when the order is replicated
The copy control is not being taken into account and we can replicate return orders from CRM to ERP with reference to invoices for which the copy control is not maintained in ERP...
Please help...
Thanks in advance!
Yolanda

Try something like this, in place of ls_input_field_names-fieldname = 'ZZDEP2PVNDPGM'..
ls_input_field_names-objectname = 'ORDERADM_H'.
ls_input_field_names-ref_handle = '100'.
insert ls_input_field_names into table lt_input_field_names.
Edited by: Kevin Alcock on Aug 10, 2009 4:03 PM

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

Zero values not taken into account during retraction

Hello,
we are having an issue with data retraction.
When we reset a value to zero, the change in the value is not taken into account and the corresponding value in R/3 remains unchanged.
There are some posts that say that the function modules UPR_COST_PLAN_EXEC and UPR_COST_PLAN_INIT should be modified in order to populate <xth_data> with zero values, but debug mode shows that the data are read before calling these functions, and the zero values are
already ignored at this stage.
Could anyone help me, please?
Thank you in advance!

Here is the second method -
Regarding your issue:
Retraction is based on the records of the SEM buffer. Zero records are
in general filtered in the buffer, so that they cannot be considered forplanning functions that execute the retraction. I regret but this is
the normal system behaviour in the standard. As workaround, please use adummy key figure that is set to a value <> 0.
The only way is a work around. If you fill a dummy key figure with an
arbitrary value, the frame work recognizes this as not 0, even if the
proper key figure is 0. In that case the 0 retraction would work. So if
not existing, create an additional dummy key figure to the cube and workon as described.
For all the of retractions (CO-OM, IM, PS) BPS planning functions are
used and they run in the general BPS framework. This framework is
designed to explicitly not process zero records because of performance
reasons.
If zero records would be processed, planning functions would run longer
but they can't deal with those records anyway. Therefore the developmentdecided on the current design, to delete all zero records first, before
processing them with a planning function. This decision has been
discussed several times before and it not likely to be changed.
Regarding SAP note you can check the work aroud I explained can be foundin the oss note 768822 SEM-BPS: Retraction of WBS element w/ Pushback.
I hope this explains the reason.
Please kindly confirm the message if your issue is answered.
Thanks for your support and cooperation.

New values not taken into account in MASS / XD99

I am trying to use a background job to block Customers for Billing at month end.
In MASS/XD99 I created a variant to update field KNVV-FAKSD (Sales Area Billing Block).
But running the variant in background (using MASSBACK), it seems the new values I thought I saved in the variant in MASS/XD99 are not taken into account.
I opened the variant again in MASS/XD99 and indeed it seems it had not saved the new values, because the screen again shows the current values.
Tried a couple of times again, but everytime I open the variant I have saved again, the new values revert back to 'current values'.
Is this the reason MASSBACK is also making no updates? What am I doing wrong?
Thanks in advance for your comments & advice.

Here is the second method -
Regarding your issue:
Retraction is based on the records of the SEM buffer. Zero records are
in general filtered in the buffer, so that they cannot be considered forplanning functions that execute the retraction. I regret but this is
the normal system behaviour in the standard. As workaround, please use adummy key figure that is set to a value <> 0.
The only way is a work around. If you fill a dummy key figure with an
arbitrary value, the frame work recognizes this as not 0, even if the
proper key figure is 0. In that case the 0 retraction would work. So if
not existing, create an additional dummy key figure to the cube and workon as described.
For all the of retractions (CO-OM, IM, PS) BPS planning functions are
used and they run in the general BPS framework. This framework is
designed to explicitly not process zero records because of performance
reasons.
If zero records would be processed, planning functions would run longer
but they can't deal with those records anyway. Therefore the developmentdecided on the current design, to delete all zero records first, before
processing them with a planning function. This decision has been
discussed several times before and it not likely to be changed.
Regarding SAP note you can check the work aroud I explained can be foundin the oss note 768822 SEM-BPS: Retraction of WBS element w/ Pushback.
I hope this explains the reason.
Please kindly confirm the message if your issue is answered.
Thanks for your support and cooperation.

Index not taken into account

Dear experts,
I have the following problem. Even though table VEPO has the necessary index (by unvel), it is not taken into account in my select statement:
        SELECT SINGLE *
          INTO wa_vepo_line
          FROM *vepo
         WHERE unvel = wa_vepo_line-venum .
the index is standard and is called : A : Selection by subordinate shipping unit and it is certainly activated.
What might be wrong?
Thanks in advance for your help.
Roxani

hi
the system picks up the primary keys or index at the runtime...it is not possible to find out which one it will pick!
try to add vepos in ur where condition.
avoid select * . specify the required fields IF possible..
regards,
madhu

CK11N Follow-up material not taken into account when costing

We are running the standard cost with quantity structure and we have detected that all the follow-up information is not taken into account to determine the bill of materials that will be used to calculate the standard cost.
SAP helpdesk has answered me the following:
"The situation in product cost planning is we do not check availability of any material stocks, and therefore we cannot provide the same functionality as MRP. You will have to create a new BOM that includes
the follow-up material or apply the modification to take into account the follow-up part."
Please, if anyone knows any user-exit we could use to develop something to fix it, we would appreciate it very much. It is a normal process and we can not say it does not work.
Regards, and waiting for any solution.
Yolanda.

Dear,
Are you getting these reservation in MD04?
Check the Planning file entry for these material in MD21 if not then create it through MD20 and take MRP run with planning mode -3 Deleted and recreated. And Processing key NETCH.
Also check the The firmed receipt is within the rescheduling horizon. The rescheduling horizon is set in Customizing for the MRP group (Transaction OPPR, Table T438M). A default value can be predefined in the Customizing of plant data (Transaction OPPQ, Table T399D). define the longer duration for it.
The firmed receipt (the MRP element) participates in the rescheduling check. You can set which MRP elements participate in the rescheduling check in the Customizing of the plant data (Transaction OPPQ).
Else you can carry out modification A using the MD_CHANGE_MRP_DATA BAdI and the CONSIDER_RESB method without making a modification.
Regards,
R.Brahmankar

How do I add photos to the camera roll that were not taken on my iPad? I imported photos to my iPad from my camera, and now I want to add them to my camera roll which is sync'ed with Dropbox as a back up mechanism.

How do I add photos to my camera roll that were not taken one my iPad? I have iMported photos from my camera to my iPad. Theses photos are in the imported photo album. I want to move these photos to my camera roll but can't figure out how to this. I want them in my camera roll because that is the album that syncs with Dropbox where I want to backup my photos. Thank you for your help.

Consider using sshfs to mount your Pi from your Linux boxes. It's much easier to configure and manage than samba. It sounds like you already have your Windows machines mounting your Pi so Samba is doing its job in that respect.
More info on sshfs in the Wiki: https://wiki.archlinux.org/index.php/Sshfs
To help get you off the dime, here's a modified line from my fstab that I use to mount my Pi with:
gav@PI:/mnt/backup /mnt/rpi/backup fuse.sshfs rw,relatime,user_id=0,group_id=0,allow_other 0 0
Subsitute my mount points with yours.
For a password-less mount:
ssh-copy-id gav@PI
after you've set up ssh and generated some keys on your client box.
Here are some relevant lines from the smb.conf file on my Pi that I use for my one Windows box in the house that might help you with your write permissions:
security = user
hosts allow = 192.168.1.0/255.255.255.0
guest account = gav
; And my share setup:
[rpi]
comment = Public Stuff
path = /mnt
writable = yes
; printable = no
; write list = @krb
[torrent_dl]
path = /mnt/video/torrent_dl
writable = yes
create mask = 0770
directory mask = 0770
guest ok = Yes
case sensitive = No
read only = No
Hope this helps.

My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old compute

My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old computer.

if you need to deactivate, contact adobe support
https://helpx.adobe.com/contact.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How many instruction keys can we declare at the vendor bank details section?

I understand that if the vendor is being shared across company codes, the instruction key will be available to the relevant companies. If company A's instruction key is different from company B's instruction key, how do we accomodate both companies' instructions to the bank then?

Hi Ethan,
Instruction keys you can maintain in Vendor/Customer Master Record, general data section, and your question how we can accommodate by company code:
1. You can maintain Instruction Key in House Bank Master data, under Data Medium Exchange tab, T.Code FI12, which is company Code specific, in this way you can maintained company code wise different instruction keys. If the instruction key is not maintained in vendor/customer master data, then the default instruction key defined for the house bank is used.
2. You can also enter Instruction key at document level, in vendor/customer line item or it can be overwritten
Regards
Javed

Invoices not shown in KE24

Hi Experts,
I have two invoices for the Free goods, for one Invoice all accounting dcoument has been created and cleared, but for one invoice only profitable analysis document has been created and is not cleared, may be because of this it is not shown im Ke24,
But I tried releasing the second Invoice to Accounting, but system says a/c has been already released.
pls help me to know why only profitable analysis A/c doc has been craeted , not the Con, Spl Ledg a/cs , pls help me to know how to get the other a/c documents and what sceanrios ,it behaves like this
Thanks

Hi Experts,
I have found that for the invoice which was not shown in KE24, there were condition records missing, so it has not taken values and not posted to FI,
Now I need ur advise, how to over come this situation should I cancel the Invoice and delete the delivery and reject the So and create A SO and see that condition records are coming correctly and the same is Posted to FI Now.
Please advise is there any other solution for this scenario.
Thanks

F110 payment for invoice not more than USD 25000

Is there a way to set up the system for F110 so that the payment per vendor cannot be more than USD 25000. Any amount above it has to be paid via approval.

Hi both,
There is some standard configuration indeed. In trans. FBZP, choose "Payment methods in company code" and you will see a field "Maximum amount" (T042E-BISBT). If you set it to 25000 USD in all relevant payment methods then the payment program (trans. F110) will put the vendor payment to exceptions (with error FZ618 - Payment amount is not within the limits allowed) if the payment amount exceeds this limit. I have just tested in sandbox and it works like this:
- it does not look at single item amounts, but at the total to be paid together in one REGUH line (e.g. if you have one invoice for 11000 USD and one for 15000 USD, then both will be blocked if they fall in the same payment proposal)
- early payment discounts are deducted (e.g., if you have an invoice for 25500 USD with a 3 % discount (24735 USD net) and nothing else then it will be paid)
- however, if the payments are split (e.g., after ticking "Individual payment" LFB1-XPORE in vendor master), then it considers each invoice separately, even if their total exceeds the limit
- SAP help says that if you enter the payment method directly into the item (rather than choosing it from vendor master), then the limit is not taken into account.
So, from the above you can see that it is not a complete protection (there are loopholes and back doors) but it is the most simple - and standard - thing you can do.
Would this help? If not, then a user exit would be a solution.

Instruction key issue in Idoc

Hello,
I had created few instruction keys and assigned them in the Vendor master. I was able to create an Idoc payment for the Vendor but, the instruction key information is not passed to the Idoc. Can someone advice me what I am missing on this?
Thank You

Not all fields of the vendor master record are necessarily passed to an IDoc. It is likely that you need to use a customer enhancement (aka u201Cuser exitu201D) to add the additional data in the segments that you need. Call upon your ABAP support folks.
Regards,
zKen

Sort Key 0014 (Purchase Order) not updated in Assignment Field

Hi SDN experts,
I assigned Sory Key 0014 to one of my vendors, after which I tried to post a PO, GR and eventually the IR.
However, upon checking the FBL1N report, system does not populate it with the Purchase Order Number.
Any step I missed out?
Also, the Purchasing Document number is empty. Shouldn't this be populated by the invoice document? (MIRO)
Regards

Hi
In FBL1N, PO will not be displayed in the Assignment field just by giving Sort Key as Assignment Field. You need to implement BTE 1650 in FIBF and write your code to populate it. The logic why sort key of PO will not populate it , because from Version 4 onwards, R/3 aqllows, single Invoice Verification against Multiple PO. Even in the BTE Implementation, you will be able to populate only the First PO Line Item No only, if you do a single invoice verification against multiple PO of the Vendor.
Regards
Sanil Bhandari

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

Try perform below steps.
Open task manager by pressing Ctrl + Shift + Esc keys. Click on more details if the option available.
Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
Then hold windows key on your keyboard and Press R key.
It will open Run window
In Run window, type Appdata and click on Ok
Open Local > Adobe folders
Delete AAMUpdater and OOBE folders
Then navigate to C:\Program Files (x86)\Common Files\Adobe
Delete Adobe Application Manager and OOBE folders
Go back to Program Files (x86) and Open Adobe folder
Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
Download and install Creative Cloud App from below link
https://creative.adobe.com/products/download/creative-cloud
Then check

Instruction key in an invoice not taken

Similar Messages

Maybe you are looking for