Instructions: Create Blu-Ray disc in Compressor with Final Cut TImeline

I searched mightily for simple instructions on how to do this. The Compressor help files are woefully inadequate in providing a simple walkthrough to do this. Burning a Blu-ray directly from Final Cut does not allow one to optimize the conversion like compressor does. So:
1) Right click your chosen sequence in Final Cut
2) Click "Share" The Share dialog box will come up.
3) Choose "Blu-Ray" in the destination drop down in the top-left corner of the Share window (don't forget to choose the destination location of the files at the top of the dialog)
4) Click "Send to Compressor" in the bottom-left corner
Compressor will open and a job will automatically be created with Blu-ray video
and Dolby ac3 audio. Set options and submit as usual in Compressor

The send to compressor option occasionally creates problems. Most people would recommend exporting as a self-contained movie, then bringing that into compressor and using your workflow from there.

Similar Messages

Whats the best blu-ray writer to use with final cut pro x

Whats the best blu-ray writer to use with final cut pro x

The Sea Tech Blu Ray Writer works great with my Mac.

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

Creating Blue-ray disc - H.264 Codec?

Hi, I know I can use MPEG-2 for Blue-Ray. Is it possible to use H.264 Codec for Blue-Ray in Compressor? (it should be much more efficient then the MPEG)... How can I make it work?

How long is your video?
I have made Blu-Ray discs using Compressor and the latest Toast Titanium on standard DVD discs.
In compressor just encode your video using the HD DVD codec supplied.
Then, using toast select Blu-Ray disc (if you have a Blu-Ray burner) or select Blu-Ray on DVD (this will create a bluray disc on a standard DVDR although you will be limited to around 30mins)
I have done this succesfully a few times and played back using PS3 with no problems.

Blu ray disc burner compatible with Macs?

Does anyone know a fast (12x) blu ray disc burner compatible with Macs?

and
<http://store.mcetech.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=MTOS&Cate gory_Code=STORBD>

How do I create Blu Ray Disc with DVD Studio Pro ?

Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
5-) Now I got a HVDVD_TS folder, with my movie compilation...
NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
thanks a lot for any help.
Best Regards
Marcelo

That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
Get the original source back and go the toast route from the start.
Message was edited by: Eric Pautsch1

Fcp 7 project through compressor 3.5 or share re: creating blu ray disc

Am I missing something but it seems you can't send a fcp project to compressor 3.5 via the "send to" option as there isn't any appropriate settings for blu ray, only HD DVD.
But you can through the share option. Is that the case or am I just getting too old for all this new high tech stuff??
"Roger Retired"

Hi iamfrustrated
I'll have to tell you I don't have much experience with compressor, I've been using Episode to transcode my DVD files and Encore to author my DVD's and I am just getting started with burning Blu-ray. But I would think you could simply burn a Blu-ray disc image to your hard drive from within compressor and then even use toast if you want to turn make additional copies. Is that perceivable?
Ron

Final Cut Pro 7: problem creating Blu Ray disc

Hello, I've a problem using FInal Cut Pro 7. I want to create a Blu Ray disc using the "Share" function, but during the process - after many hours - appears this warning message: "SHARE WARNING - NSEXPETION RAISED BY 'NSPORT TIMEOUT EXCEPTION' REASON = CONNECTION TIMEOUT: DID NOT RECEIVE REPLY". Someone can help me? What does it mean? Thanks! P.S. Duration of my film (in the timeline): 35 minutes.

Yes. It will only burn Blu-Ray if it is the Pro version though.
Compressor will also burn the Blu-Ray if you set it up to do so:
http://documentation.apple.com/en/compressor/usermanual/index.html#chapter=25%26 section=3%26tasks=true

Best way to copy FCP-created Blu-ray Disc?

Tried using FCP7 to burn another copy of a Blu-ray disc a week after I burned the first copy. But since I didn't want to wait 16 hours for FCP to encode the Blu-ray files again, I copied the files off the first Blu-ray Disc I'd burned onto my desktop. Then, I inserted a blank Blu-ray Disc into my external burner and copied the desktop files onto it.
The new disc burned with those files ... but when I play it back in my Blu-ray player, there's no audio. Any ideas??

Try making a disk image from your original disc, then burning from that.
1. Insert your disc and launch Disk Utility.
2. Select your optical drive in Disk Utility.
3. Choose File > New > Disk Image from<disk name>.
4. Choose DVD/CD Master, press OK, and wait.
5. Select your new image on the left, then press Burn in the toolbar.
Not sure if this process has changed for Blu-ray but I suspect not. The disk format for DVD and Blu-ray is UDF (not FAT32 or HFS+ which you get from a standard Finder burn).

Creating Blu ray disc using FCP

I'm curious to know how people are creating a data file for a Blu Ray Disc that use FCP? i.e Toast w/ a third party burner.
Thanks

Will you be using Encore or Toast to encode the video file?
In either you should start a video file exported as self contained current settings from FCP, and encode that to either h.264 blu ray mpeg2 HD in the settings of either Encore or Toast.
What are your sequence settings in FCP?

Using an external Blue Ray Disc Drive/Burner with an imac? Can I? Brand?

I have a blue ray player in the living room and I'm just starting to research burning blue ray discs using the imac.
I have an intel based imac, 2.8ghs intel core 2 duo, 4gb sdram, 1tb hard drive.
Should I be able to safely use an external blue ray burner?
If so, recommendations as to a product?

there is no official support for blue ray drives in leopard. Steve jobs said blue ray is "a bag of hurt" referring to the licensing issues for blue ray.
As a result there is no recommended drives as they are not officially supported.
I can't recommend either as I don't use Blue ray yet.
A quick google brought up this
http://www.tuaw.com/2007/01/25/blu-ray-arrives-for-the-mac-wheres-hd-dvd/
Judging by your list of gadgets below your post, it won't be much good as it is for the Mac Pro
All I can say is that Snow Leopard may bring better support for Blue Ray, all you can do is hope!
Regards

How can I playback blu-ray .img files generated by Final Cut Pro X?

When I share a Final Cut Pro X project in Blu-ray and I set the output device as Hard drive (blu-ray), it creates a blu-ray image with a .img extension.
By the way, the project's clips are AVCHD (.mts extension) and the settings are set to 1080i (1440x1080 25i).
My question is: can I playback this file without having to burn a blu-ray disc?
I've been looking for information, and some people seems to playback blu-ray .iso files.
And: would Compressor 4 solve my problem? (is there anyway in Compressor to create a .iso image or something easier to play?).
By the way, I do have access to both Windows and Mac computers.
Thanks in advance,
Pol

Thanks for the answer.
If you own Compressor 4, could you tell me if it includes an option to generate a .iso file instead of a .img?
(here's information on how to playback a .iso).
Thanks,
Pol

Can I use motion 5 and Compressor with Final Cut Pro 7?

Hi, Guys and Girls:
After reading a lot about the new Final Cut X I decided not to buy it. I´m not gonna say anything about it, pretty much everything has been said so there´s no point in being redundant about it.
So my question is this:
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?
I heard the new version of Motion is nice, not so sure about the new Compressor but any improvement would be nice.
Thanks in advance.
Daniel Sametz.

Anyone?
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?

Go to next chapter not working with Blu-ray disc

I’m using Adobe Encore CS 5 to create Blu-ray disc but when the disc is created the go to next chapter buttons do not work. In Encore when using the preview option the go to next chapter buttons do work but once the Blu-ray is created and I try to go to next chapter while playing the disc I receive a message that reads "operation not available". I have created multiple Blu-Ray projects, used different brand Blu-ray media and even used my Windows system and my Mac system but the same issue keeps happening. I’ve also played the Blu-ray on multiple Blu-ray players and it happens on all of them. The Blu-ray burner I’m using is a LG BE14NU40 External Blu-ray burner and I have contacted them but they tell me it is a problem with Encore not the burner.

Google "encore blu-ray next chapter remote".
Example: Re: Encore 5 "Next / Forward" Button Not Available For Blu-Ray?
You'll find lots of issues. This function may work if the project is very simple. But perhaps not.
You might post a screenshot of your flowchart.

Preview works perfect, Blu Ray disc doesn't - Encore Cs5.1

Hello All
I have never had any trouble creating blu ray discs before until this one. I have a project created with no errors reported when i check it. The flow chart looks good. The timelines dont have crazy long names with spaces. The preview plays PERFECTLY!!! After burning the project to a blu ray disc i see that the buttons on one particular menu will not work even though they are connected to the proper timelines. Also the FirstPlay which is a short 20 sec video timeline will not play.
Its driving me crazy cause ive never had trouble creating a blu ray before. Ive tried to play it in three different players and all the same results.
Am i missing something

Well im not sure yet but i think this was a problem with me Premiere Pro exports. I had exported all but one video with a 25 frame rate. apparently blu-ray will not play that. Im currently exporting new video in a 29.97 frame rate and will attempt to burn a new disc.
http://helpx.adobe.com/encore/using/importing-assets.html

Instructions: Create Blu-Ray disc in Compressor with Final Cut TImeline

Similar Messages

Maybe you are looking for