Instructions for "Actionlist Not Found" error didn't work

i received the actionlist not found error and despite following the corrective instructions three times, i'm still unable to install adobe flshplayer for internet explorer...any help?
...i also perfomed a clean uninstall of flashplayer the second time but didn't work

I don't know what "corrective instructions" you are referring to, but if you use the offline installer, you shouldn't get that message any more.

Similar Messages

Mapping for component Not Found Error ?

Hi does anyone know how this error can be fixed I am trying to refer to a compnent called task and it
is saying I have not mapped it yet it has been mapped inside my coldbox framework ?
The error I get is:
Coldfusion.orm.EntityMappingNotFoundException: mapping for component task not found
Any help would greatly be appreciated on this.
Thanks

When using ORM generator to generate cfcs make sure that Application.cfc has unique app names in order to solve the problem above.

Web Reference inside Script Task causes Binary code for script not found error

I am attempting to access a SOAP web API (sales force) from a SSIS package. To do this I created a script task.
Inside the script task I went to Add Service Reference. Then I click advanced to make it a web reference. Then I point it to the WSDL file and give it a name SFEnterprise. It successfully finds and adds the Web Reference to the script task.
I leave scriptMain.cs alone and I have no warnrings and no errors. Now in the solution explorer I right-click the script task and hit BUILD. I see the message from Output that BUILD succeeded.
I close the VSTA script editor and now I am back on the control flow window. However I have a red X on the script task with the following message. "The Binary code for the script is not found. Please open the script in the designer by clicking EditScript
button and make sure it builds successfully"
But it does build successfully! And I have not even added any custom code except for the web reference using the WSDL file.
I am using SSIS 2012 and Visual Studio 2012. I have been reading about this binary code error message on Google searches and suggestions about delay validation and turning off pre-compile do not apply to SSIS 2012.
Is SSIS not capable of doing this?

I was wanting to use the 2.0 coding style of accessing the soap service which is supported by adding the web reference vs. adding a service reference. But using a service reference instead of web reference actually allows the script task to compile. This
is really odd behavior. I wonder why one works and not the other.
Changing my C# code over to service reference coding style to access the SOAP service was still returning an error. When I added a break point I found the error message "Could not find default endpoint element that references contract in the ServiceModel
client configuration section"when calling new SoapClient();
I found this page http://www.sqlis.com/sqlis/post/Where-is-my-appconfig-for-SSIS.aspx and after I copied the System.ServiceModel app settings from the script task app.config to the DTSDebugHost.exe.config it was able to successfully login to the endpoint
during package debug mode.
This means I will have to edit the SQL Server DTS config files on the prod SSIS server to get the package to actually run in the job agent.
So for now I am good I think just plugging away at coding what the script task is actually supposed to do now that is can actually login.

I am trying to install adobe flash player but i keep getting actionlist not found error

I just got this computer and i know nothing about mac system...please help me! is Mac OS X 10.9 and my safari is 7.0

Try this.
1. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Follow the prompts.   Quit Safari.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

Installing New version but during install get "Actionlist not found" error

What to do here? I have uninstalled old version and have tried multiple times on multiple downloads this same error. I have gone ove rall the troubleshooting docs and changed security settings and still same error. Thoughts?
32 bit Microsoft 7 Explorer

Download and run the offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment

"Actionlist not found" error message when installing

Mac OS 10.8.3 - Firefox 17.0.6

Try this installer http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

Having an error on my Flash Player install. Error stating "Actionlist Not Found". How can I fix?

Having an error on my Flash Player install. Error stating "Actionlist Not Found". How can I fix?

Download the Adobe Flash Player installer directly by clicking one of the following links.
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Upon a failed install of Adobe Reader I get an error "Actionlist Not Found"

I am running Windows 7 64-bit. I have already uninstalled Adobe Reader and Flash and rebooted many times in the process. I can download everything just fine. I can start the installation process, but after it "initializes" the instalation freezes at 0% for a moment then I get an error. The window is "Adobe Has Encountered Problems" and in the window it says "Actionlist Not Found." I have no idea what this means or what I can do to fix it. I also get the same error when I try to install Flash Player. Please note that I have tried directly installing by choosing my operating system and whatnot from Adobe.com. What can I do to fix this?

You need to download and run the offline installers.
Adobe Reader: http://get.adobe.com/reader/enterprise/
Flash Player: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header

"File not Found" error in the admin console for dimension

Hi All,
We are onto the BPC7 MS version and recently we have started facing an error "File Not Found" while trying to access the dimension members from the admin console.
I have checked the "adminapp" folder where all the dimension files should be placed in the system, the files are present in the folder.
The mbr<DIMENSION> tables are also present in the database and have the members intact.
I have also tried with processing the dimensions (NOT processing from the membersheet) and it goes successful, but still face the same "File Not Found" Error.
We have a single appset and a single application.
Regards
Raghav

Hi Sorin,
Where can I check the File path if it is set incorrect?
I am recieving this message for all the dimensions, even when I click on the "maintain dimension members", try to process or even try to copy them i have this pop up showing "file not found".
I have the dimension tables intact at the DB servers and they have the members in them.
Regards
Raghav

With 3.6.12, Help menu item "For Internet Explorer Users" results in a "Page Not Found" error. Is this a known bug? Is it being addressed?

Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.

Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee

Class not found error for applet.

This is probally a really simple mistake but I've tried everything and can't find it.
My applet works fine with applet viewer - I'm running it from JBuilder. But when I open my html file in the browser it gives me a 'Class not found' error. I've tried running other applets (my own and demos on this site) and they work fine.This is the applet tag code:
<applet code = "Rotary.class" width = "650" height = "580" align = "top">

<param name = "sector0" value ="234,215,244,207,154,43,125,63">
</applet>
The class file is in the same directory as the HTML file. Do I need to specify the codebase? I tried that too - giving it the full pathname of the class.
In the Java console it said that it couldn't find "C:Project\Rotary\javax\swing\japplet"
I don't think it could have anything to do with the fact that I'm using swing because the other applets I used used swing.
Please help - I'm really running out of ideas here!

You have a similar problem like I had.
You seem to have a too old JAVA environment for the browser - I had a too new environment.
For all who are experiencing the same problem!
Problem:
You're compiling your applets with a quiet modern compiler (i.e. Netbeans Version 3.5.1)
You are able to compile your applets without any problems but if you try your applets in "real life", the browsers can't interpret your applets [class not found]. (I tested Internet Explorer 6.0 and Netscape Navigator 4.7)
So you need a plugin for the new JAVA environment because the JAVA environment of the browser is older than that which the applet needs.
Well, you have the choice to demand to every user of your applet to download the new Java Runtime Environment, but then don't wonder why nobody visits your site!
But, don't worry: I figuered out another solution, that Netbeans (www.netbeans.org) allows to compile in different JAVA versions.
Solution:
What you have to do is:
- Install a previous version of JDK (i.e. JDK 1.3 - I would suggest, lower versions don't work with Netbeans 3.5.1 and JDK 1.3 is enough for IE 6.0 and NN 4.7, which I tested)
- Go into the "bin"-directory of Netbeans (i.e. c:/netbeans3.5.1/bin)
- Open the file "ide.cfg" (with notepad or any other texteditor)
- You see a line like: jdkhome "C:\java\j2sdk1.4.2" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- Change the path to your other JDK you wish, like: jdkhome "C:\java\jdk1.3" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- That's it, you can compile your applets in a previous version of JAVA so that "older" browser user don't have to install a plugin for the new JAVA environment.
Have fun!
If you have any questions I would be pleased to help you.
If this tip helped you already I would be pleased if you would send me a quick email with your experience.
My email: [email protected]

"javadoc not found" error for javax package in netbeans.

I am using jmf api on windows under netbeans. But problem is that netbeans do not display documentation for jmf methods . Instead it shows "javadoc not found"
error. Can someone plz help me how to configure the javadoc for jmf.

I am using jmf api on windows under netbeans. But problem is that netbeans do not display documentation for jmf methods . Instead it shows "javadoc not found"
error. Can someone plz help me how to configure the javadoc for jmf.Download api docs from [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/specdownload.html] ....
Then in NetBeans:
Tools > Java Platforms > "JDK 1.x (Default)" > "Javadoc" tab > "Add zip/folder" button.....
Add the path of the jmf javadoc zip (or you may have to extract the zip)
You may not see the changes immediately, try restarting NetBeans....
Thanks!

Page not found error for search results

I have a site search recipe that worked perfectly on a previous site. I’ve created a new search for a different site following the same recipe. I must be missing something though, because I am getting a page not found error.
Here is the code that worked before:
<form name="catsearchform32891" method="post" action="http://corehog.businesscatalyst.com/Default.aspx?SiteSearchID=3770&PageID=15863972" ><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input type="image" src="http://corehog.businesscatalyst.com/images/search-button.png" class="cat_button" /></div></form>
Here is the new site search:
<form name="catsearchform12233" method="post" action="http://greenprideinc.com/Default.aspx?SiteSearchID=3936&PageID=1661214" ><div><input class="search-box" type="text" name="CAT_Search" id="CAT_Search" /><input type="image" src="http://greenprideinc.com/images/search-button-n.png" class="cat_button" /></div></form>
Any suggestions on what I’m doing wrong?

I just noticed one simple thing. I do not know its bug or what.
After sign in the page is getting redirected to :
https://creative.adobe.com/#files
where I am getting error saying that page not found.
I tried to add '/ ' after that and it works.
https://creative.adobe.com/#files/ <<< like this.
I guess some link issue or redirecting issue.

Terminal Returns Not Found Error for Most Commands

Hi all,
I'm really new to Mac OSX and UNIX based systems. I wanted to run a few Windows games on my Mac Mini so I started installing Wine and MacPorts. Having done so, I typed in "sudo port install wine" minus the quotes, the terminal returned a not found error. I tried other basic commands like say and clear and all of them return the not found error. I've googled this and all I've understood so far is that the PATH might be incorrectly set. So I ran this command: echo $PATH and it returned this: /opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/opt/local/bin
Can anyone tell me how to set this path correctly? I'm a complete newbie to mac and have no idea where .bash_profile or any of those files are. If it helps, I've also installed xCode and the Command Line tools for xCode. I'm running Mountain Lion.
PS: I tried export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin but it only works as long as I keep the terminal window open. If I close it and open it again, it goes back to the same problem.
Thanks in advance,
Jack

Some time in your past, your or a script modified your shell initialization file. Most likely related to installing MacPorts.
Look in your home directory for one of the following files:
/bin/ls .bash_profile
/bin/ls .bash_login
/bin/ls .profile
/bin/ls .bashrc
One of them will have your current export PATH.
Using nano, edit the file wtih your export PATH to include the additional search directories. It would be best to put the missing search directories at the beginning of the list with the /opt/... directories from MacPorts at the end.
/usr/bin/nano .name.of.shell.initialization.script.that.has.the.export.PATH

When downloading flash player an error actionlist not found?

actionlist not found when tring to download flash player

Hmm, not an error I'm familiar with. A screenshot would be really helpful.
Once you've taken a screenshot (I'd really like to follow up on that), please give the offline installer a shot:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Instructions for "Actionlist Not Found" error didn't work

Similar Messages

Maybe you are looking for