Instructions For Disassembling Apple 20-inch Cinema A1081

Anyone know where/how to find instructions for disassembling an Apple 20-inch Cinema A1081?
I'm very competent, and would like to swat out the LCD portion from a damaged frame to another healthier one.
Have searched everywhere for service manuals .... these older Apple Cinemas are getting harder to find.
Thank you ...

I have the same problem.  Did your screen develop any further symptoms?
  What did you find out? 

Similar Messages

  • Apple 30" inch Cinema Display pixelation problems

    This is following on from a similar thread which is as yet unresolved the thread was called "30" with edge effects, green pixels?"
    My setup is Mac Pro 3GHz Dual Intel (Brand New)
    Graphics Geforce 7300 GT with a brand new 30" apple cinema display.
    The problems is that pixelation occurs at random times and is only solved by changing the screen resolution down and then back up to its native setting. Is there a away to solve this problem. Someone on the thread mention above thought that it might be a syncing problem between the monitor and the card but the thread was never resolved and it is dated October. By the way I have check whether its plugged into the correct port and it is so any suggestions or bug fixes would be helpful thanks.

    I've had my 30" display for 1 year running on an "old" G5 with an ATI Radeon 9600 Pro card (along with an "older" 20" Apple Cinema Display, the one with the plastic bezel). No problems with the 30".
    A few weeks ago I got a Mac Pro with the ATI Radeon X1900 XT card. That's when I got the green pixelation problem. I thought it must be the card (since the monitor works just fine on lesser cards...), so I took the entire Mac Pro and X1900 to the Apple Store and hooked it up to one of their 30" monitors: no pixelation problems after over an hour of test running it with Aperture, Safari, etc. ****. I began to think that Apple has made some sort of change in the more recent 30" monitors to avoid the problem; either that, or my monitor is old and tired after only 1 year.
    My 30" still runs fine when I put it back on the old 9600 card; it does ok (with only Minor intermittant pixelation lines) on the original (lesser?)card that came as base equipment on my Mac Pro; and it has the MOST pixelation problems with the BEST card (the X1900). Perhaps these 30" monitors can't handle all the data being sent by the more powerful cards? Is that possible?

  • Apple 30 inch cinema display

    What video card would work best with the 30inch display and Gateway PC?

    If its a year old it'll probably have a PCI-Express slot, but you'll have to find out for sure if your system has AGP or PCI-Express.
    I don't know what your current graphics card is or needs for a graphics card will be, but these has two dual link DVI ports.
    Radeon X1650XT 256MB 128-bit GDDR3 PCI Express x16 Retail.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814161054
    Another Radeon X1950PRO 256MB 256-bit GDDR3 PCI Express x16
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814102061R
    But thats OEM which is just the card itself.
    G5 Dual 2.7   Mac OS X (10.4.9)   ACD 30" & 23"

  • Is it possible to attach Samsung Monitor to the 27 inch Cinema Display?

    Hello,
    I have an Apple 27 inch Cinema Display and I also have a Samsung 27 inch monitor.
    I would like to know if it's possible to create a dual monitor setup by connecting the Samsung monitor (dvi or hdmi) with an adapter to the Cinema Display's mini display port on the back?
    Does anyone know if this is possible? Or does it only work with another Cinema Display?
    I'd appreciate any help received.
    Thanks,

    Is it possible to connect the PC to the Samsung monitor via Dual link DVI and to the Apple Cinema Display via mini display port and work as a dual monitor setup?
    That should work if the PC has both DisplayPort and dual-link DVI (or two DisplayPorts).
    I'm thinking the best solution for MacBook Air is to purchase a Thundebolt display and hook that up to the Cinema Display and I think then I would have a dual screen setup at full resolution.
    That will work if you connect a Thunderbolt disk drive (with two Thunderbolt ports) between the Thunderbolt display and the Mini DisplayPort display.
    But currently I don't think there is a way to connect a PC to a Thunderbolt Display.
    Not unless the PC has Thunderbolt.

  • The instructions for setting up icloud on windows 8 don't work

    The instructions for linking apple id to icloud for windows 8 do not work

    @mouse57:
    Do you mean that support document: http://support.apple.com/kb/HT4864 ?

  • Proper video card for 23 inch Cinema Display?

    Hey everyone...
    I recently bought a 23-inch cinema for my G4. Upon the advice of Apple, I purchased a ATI Radeon 9200(128mb) vid card to power it. Since installing the card, I seem to be having memory issues with my system, such as: memory lag with files in Photoshop and burning errors with my cd burner(i.e. buffer underrun errors), both of which I didn't have before. I guess what I'm wondering is, was this video card appropriate for this moniter? And also, what could be causing this ram conflict. Any suggestions are greatly appreciated. Thanks for your time!
    -ian-

    To use the FireWire ports on the display you will have to plug the display's FireWire cable into the FireWire 400 port on the MacBook Pro. If your MacBook Pro has a FW 800 port, you could use that for your disk drive with a FW 800 to FW 400 cable, or a FW 800 to FW 400 adapter. You should be able to use the display's FireWire ports for disk drives or cameras, but some brands of cameras don't work well with other devices on the FireWire bus.

  • Optimum extension cabling for 20-inch Cinema

    I need to add up to 2 meters distance between my MacPro and my 20 inch cinema display.
    Is there an extension cable on the market that combines the video/firewire/USB cables and thereby accomodate the original cable, or
    Do I have to extend these cables separately?
    I ran across a 3 meter extension for the video cable? Can I just connect this up and expect it to work or will some kind of booster or other active component be required?
    Can firewire & USB be extended 2-3 meters without ill effects?
    My ideal is a 2 meter extender cable that mates perfectly with the 3 functions in the original cable, and you just connect it up and go ... is this possible?

    Thanks. Your reference puts me on the right trail.
    The cited reference seems to imply there's a non-active version of the apple combo cable that would work for the 20 inch cinema ... but I'll be damned if I can find it. Hopefully I can get some direct feedback from Geffen about it.
    Careful measurements show that I really only need to extend my original combo cable 3 feet. Are you proposing that I just use one of their 'copper' DVI extension cables, a gender adapter and separately buy extensions for the USB and Firewire.

  • Video cards for 2008 Mac Pro with 4 20 inch Cinema Displays

    I have an early 2008 Mac Pro Quad Core with 16GB RAM. I run a 4 (20 inch Mac Cinema Display) monitor configuration off of it. one of my video cards just failed. They were never very good at handling FX in FCP anyway. I want to upgrade and get good cards for 2 displays each and if possible, video cards that will facilitate FCP X as well. What should I get?

    OS X has drivers in 10.6.5
    It is the ROM firmware that makes it work though there is help there too now for PC cards and flashing.
    OWC is over pricing.
    100s of threads asking the same question for the last yr.
    5870 also, but costs $200 more.
    More about using 6870 and others:
    netkas.org
    PS: the 'short' url for the Apple ATI 5770 w/o any user/cid - Product /MC742ZM/A
    http://store.apple.com/us/product/MC742ZM/A
    Radeon 5870 vs 5770 GTX 285 4870
    ATI Radeon HD 5770 - specs etc

  • Analogue input for 30 inch Cinema Display?

    Hi there,
    I'm looking at getting a 30 inch Cinema Display and just wondered if there was a way to connect analogue sources (such as an xbox 360 for example) to the display. I guess what would be needed is a female DVI -> female AUX adaptor but I'm not sure if such a thing exists or if it would work the way I think?
    If not, do you have any recommendations for good 30 inch displays that do have analogue inputs?
    Thanks very much
    Sam

    The Apple display requires digital input. Dell has a 30" with analog and digital inputs
    <http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l= en&s=bsd&cs=04&sku=223-4890>

  • LED-alternative for 24-inch cinema display?

    With my month-old Mac Pro 8-core, I cannot use a 24-inch LED Cinema Display, because the Mac does not have a mini display port. No matter how much I would like to buy the LED-display, I'm not willing to invest an extra 315,- euro's to get a new (noisier) graphics card with mini display port to replace my GeForce 8800GT. Does anyone know a good LED-replacement for the 24-inch Apple display? It has to be an IPS-type panel, not TN.

    Hello, Ertjie.
    The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
    However, I note that the kb article expressly states that this firmware update: 
    ...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
    If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done?

    Can anyone help me change the DOB on my sons profile for his apple I'd so I can setup family sharing? I originally put both ids in my name. He is 19 do it keeps saying needs my permission but no instructions in how to get that done? His phone was stollen once last month need to get this done ASAP to prevent future headaches. Ty

    You can not change the date of birth on the account. Apple makes that clear up front when the account is created.
    The only way to "fix" this is going to be for him to create a new account with the correct information. Any apps purchased with the old one will need to be re-purchased with the new account. They can not be transferred.

  • My ipod touch is disabled for 212,456,786 minutes! I have tried to restore and followd all instructions on the apple support site but this has not worked. Help!

    My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!

    Without know exactly what you did or what happened:
    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Can i use Apple 2005 20-inche cinema display on Mac pro ?

    can i use Apple 2005 20-inche cinema display on Mac pro ?

    If the display has a DVI connector it will plug into the Mac Pro directly.  If it uses ADC (Apple Display Connector)
    <http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
    you will need a DVI to ADC adapter
    <http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

  • HT201263 None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

    None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

    Read: iPad Troubleshooting Assistant
    That procedure eventually leads you to the need to restore it.
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. 
    Select the iPad in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • Where can I buy the sticker for macbook air 11 inch where scrat is running, the apple on his back?

    Where can I buy the sticker for macbook air 11 inch where scrat is running, the apple on his back?

    http://www.amazon.co.uk/MacBook-Squirrel-Running-Acorn-Sticker/dp/B00MJGK0T4/ref =sr_1_3?ie=UTF8&qid=1424776145&sr=8-3&keywords=ice+age+apple+sticker
    http://www.amazon.co.uk/MacBook-Squirrel-Apple-Vinyl-Sticker/dp/B008ZREAE2

Maybe you are looking for