Instructions for Rebuilding Mac OSX 10.7 with Bootcamp?
Hi Folks!
I'm new to the Mac OSX world (well, relatively) so please bare with me as I ask what may seem a very elementary question....
I would like to completely rebuild my iMac, and include Bootcamp (yes, I want the option at boot-up time; not VMWare) so I can run Windows 7. Is there a document, or website, that would provide these instructions? From booting up from the OSX CD, creating the various partitions, installing Bootcamp, followed by intalling Windows 7?
Thanks in advance for any, and all assistance!!!
Cheers!
Richard
It is very simple. Boot from your original install DVD and run Disk utility. Wipe the complete drive by either erase or partition. Then install OS X. Once that is done run Boot Camp and create a partition for Win 7. Download the support files from Apple for Win 7 and have the Win 7 DVD handy. Insert 7 DVD and install. Once the install of 7 completes (or during the install of 7) load the Apple drivers.
If you want multiple partitions for Mac or Win 7 I'm not sure you can do that and still install 7 or after and have everything still work.
Or you could just buy a lower cost Win 7 PC and place it next to your Mac.
Similar Messages
-
i just wrote over firefox 3.6 with 5.0 for my mac OSX and discovered my mac won't support it. Is there a way I can recover all my lost files and get the old version back?
You can download and install Firefox 3.6 from http://www.mozilla.com/firefox/all-older.html
-
Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?
Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater -
Spotify is a problem for the Mac OSX update Yosemite 10.10
Hello,
When i downloaded the new update for the Mac: OSX Yosemite 10.10 - my macbook could'nt be shut down anymore.
I've called the Apple helpdesk and we both tried to figure out what was causing this problem. After some tests it seemed that Spotify was the problem of all this. (Something that is called Spotify manager? was failing with the start up of my Mac).
So i hope this problem can be fixed, because i had to delete Spotify for that my Macbook could work normally again.
And it's ashame, because i can't use Spotify anymore now.
I hope that this will be fixed, so i can enjoy music again.
Same here, tried to install first time on 10.10.4, gets a black screen and can't quit app. Looks like this app is not compatible with OSX 10.10 That's awesome, how do you expect Mac users to stick with your company when there is an alternative for the same price. Even more so when your app does not even run properly on OSX updates. Get it fixed, fast or I'm leaving. I'm a premium user, not a freebee.
-
Mac osx 10.6 with sbs server 2003
Hi everyone
i m using mac osx 10.6 on my imac . i want to connect it with sbs server 2003 , then i want to to make a map drive on it .I m trying it to cmd+k to connect with server but it not connecting , i m wondring do i need to configure any thing else to connect with windows server .
cheersHi John,
thanks for your advice, I have actually been using the two links you provided,
yet they both lack support for the home user, and all suggest that the users have a static ip address, but this is sadly not the case.
has anyone used . http://www.dyndns.com/about/home_solutions.html
Does anyone use this service at home for their server and which settings did they use ?
This would at least let me think Im working along the right lines.
Im getting stuck with the Primary DNS questions along the setup route from apple setup. : (
thanks again
Yaddle. -
Mac OSx Full Drivers with Printer Options
Hi,
Is there a way to deploy full drivers with iPrint. The PPD driver deployment works well, but it lacks any of the printer functions that is needed by the clients. The printer is a Xerox WorkCenter 7845 (Color, HolePunch, Stapling. . . )
The PPD driver only does grey scale printing and none of the other features work. I would love to do the following with iprint:
1. Set printer options.
2. Deploy the full Mac OSx Driver package of Xerox for this printer.
Hope there is a reply out there.
Thanks.Originally Posted by odegos
Hi,
Is there a way to deploy full drivers with iPrint. The PPD driver deployment works well, but it lacks any of the printer functions that is needed by the clients. The printer is a Xerox WorkCenter 7845 (Color, HolePunch, Stapling. . . )
The PPD driver only does grey scale printing and none of the other features work. I would love to do the following with iprint:
1. Set printer options.
You can edit the ppd file to set the options.
Originally Posted by odegos
2. Deploy the full Mac OSx Driver package of Xerox for this printer.
Would like to know this to.
Originally Posted by odegos
Hope there is a reply out there.
Thanks. -
I recently went to the apple store in Covent garden and had a battery replaced for my Mac Book Pro 2009 edition.
After fully charging the mac the percentage guage meter displays the battery is losing power fast. 1% increments goes down every 5 minutes even if I have only a browser which is opened and no other running applications.
My recent test after a fully charged mac book pro allowed me a maximum use time is 2 hours!
I have friends and family members who have the same model as me and their mac book when running on battery, shows that the laptop has about 6 hours use. They are able to run multiple applications and use sites such as Youtube and still get a good 4 hours of use.
Anyway, I have booked an appointment with a Mac Genius for tomorrow to look into this issue.
I thought I'd just ask the community to find out if any of you can help.
Many thanks in advance.Thank you Donald.
You are the second person to tell me this so this is more of a reason for Apple to sort out issue for me.
The team there don't believe there is an issue with the battery.
Thank you once again. -
I inadvertently deleted Firefox and emptied the trash bin. I believe it was version 3.5. I have a MAC OSX 10.4.11. After several futile attemps how can I re-install the latest version of Firefox compatible to my MAC system? Thanks!
As of Firefox 4.0 and newer the Firefox builds from Mozilla requires both Mac OSX 10.'''5'''+ and a Intel.
Either you can use 3.6.19 from http://www.mozilla.com/en-US/firefox/all-older.html
Though for you 3.6.18 will be safe also as 3.6.19 was to workaround a font crashing issue on 10.7 Lion that was not fixed in time on Lion before release. http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.18/mac/ and pick your language and download the Firefox 3.6.18.dmg -
Compatibility of Mac OSX 10.4 with 10.7.4
Hi there,
I bought this cambridge advanced learner's dictionary Third edition that's compatible to both Windows and Mac OSX10.4. But my DVD -Rom just not accepting. Its simply ejecting after a couple of minutes. Same happened with my Windows operating system as well. My Mac operating system is 10.7.4. What I need to know is
1. why is my DVD rom not reading the CD?
2.Is the software compatible to Mac Osx 10.4 also compatible wit 10.7.4?
3. How must I solve the issue?
4. Can you tell me where can I find the dictionary that's compatible with my operating system that's Mac 10.7.4?
Thank youSo I would try resetting your SMC on you mac running 10.4 http://support.apple.com/kb/HT3964 You may also need to clean out the optical drive with pressured air. If those 2 things don't work, then you might want to have the optical drive looked at. As far as the software being compatible with 10.4 and 10.7, most likely it's going to be a power pc app and not going to be compatible with 10.7 but you can always try loading the software.
-
Is there an Adobe Acrobat plugin for FireFox/Mac OSX?
Any of you are aware of Adobe Acrobat Plugin for FireFox on Mac OSX? There seem to be one FireFox PDF Plugin for Mac X. But am looking for Adobe plugin.
Thanks,
RajHi ..
You can use the pre installed Preview app for editing .JPEG files.
Preview is located in your Applications folder. -
Mac osx kernel panic with nomachine
Symptom : Was frequently getting kernel panic on MacBook Pro 9.1 after any mac osx 10.8 (mountain lion) software upgrade.
Root Cause : NoMachine softare installed on Mac
How to Fix : Start Mac Book Pro in Safe Mode (Hold Down Shift while starting, until a grey bar appears)
Once booted in Safe mode, remove from "NoMachine" from Applications folder
Other third party drivers can cause similar problems.
Diagnosis Steps:
1. Start in Safe Mode
2. Get the panic log - /Library/Logs/DiagnosticReports
3. Will have error like
0xffffff80fbf7bfb0 : 0xffffff800becf473
Kernel Extensions in backtrace:
com.apple.iokit.IOPCIFamily(2.8)[6C1D646D-7E5E-3D7F-A557-2CBA398FF878]@0xffffff 7f8c475000->0xffffff7f8c49dfff
com.nomachine.driver.nxusb.io(4.0)[99876DC0-AF55-30D5-AF55-DD53791C05A2]@0xffffff7f8e1f4000->0xffffff7f8e210f ffUninstalling NoMachine altogether is not required. It is enough to disable the USB driver as explained here:
https://www.nomachine.com/AR10K00733 -
It takes 30 seconds or more for my Mac to be activated with mouse or any key
when my Mac is asleep, it takes 30 seconds or more for it to be activated by mouse or key
Dan ..
I responded to you here > it takes 30 seconds or more for my Mac...: Apple Support Communities
Please do not start duplicate topics. Makes it that much harder to assist you. Thank you! -
Windows 8 has been running very well after installing it with bootcamp and its latest drivers.
I just have never updated Windows 8 itself, (windows has never checked for updates), and just has been
using it bare. Do you update windows 8 to the latest updates with windows 8, and have any problems
with the updates? Just curious before I start updating it for once.You have to update Windows to the latest version with Windows Update and keep it updated, because this is a matter of security. Microsoft provides a lot of security updates and you have to install them even if you have got an antivirus. Then you can find other updates, and if you want to install Windows 8.1, just install all updates with Windows Update, and then go to the Windows Store and download Windows 8.1.
Apple says that Windows 8.1 is not supported by Boot Camp, but people say it works without any problem with the most recent drivers, so I do not find any risk after upgrading to Windows 8.1. -
Time Machine for both Mac and Windows side of BootCamp
Can I use my external hard drive to backup both the Mac side and the windows side of BootCamp? I am using Time Machine for the Mac side, and I know that WinXP doesn't have Time Machine software. Can I use the hard drive when I'm on the Windows side as I would on any Windows machine, and move files under "My Computer"?
Can I use my external hard drive to backup both the Mac side and the windows side of BootCamp?
ONLY if you partition the external and use Winclone for windows-but leave as much space as possible for TM.
I am using Time Machine for the Mac side, and I know that WinXP doesn't have Time Machine software. Can I use the hard drive when I'm on the Windows side as I would on any Windows machine, and move files under "My Computer"?
Yes.
Without special software, the windows partition can't even see your OS X partition.
Good luck! -
When I try to login to FB now, I get a website that takes over Firefox - WebSpy, or something like that. I already changed my email passwords. When WebSpy takes over, I have to quit Firefox. I'm not using FB right now, until I get this sorted out. It was sending out bogus messages to all my friends.
Have you tried opening them in a Finder window? Also, you might boot to your Install DVD and launch Disc Utility to verify and repair both permissions and your drive.
Sounds strange. I also have the Lacie 500G - partitioned, but with one being FAT 32 ...works fine for me.
Maybe you are looking for
-
How do I repeat a iCal event daily without the weekends.
My son has a practice every weekday for two months. When I go to put it on the iCal, it offers me daily, weekly, etc. and customize. Yet, the customize doesn't offer a "weekday" option. Does anyone know how to do this other than doing it daily and re
-
Can I change a new Unlock iPhone5 or 5S?
Just want to ask, my Unlock iPhone5 is totally broken. I bought it on july,2014 at apple store, and I'm a T-mobile user. Can I just go to apple store and tell them that my iPhone5 is died and get a new Unlock iPhone5 for free? Or can I pay lest money
-
EPM 11.1.2 Installation error
Hi, I am getting following error while trying to launch EPM configurator....please let me know if any one has any idea about it Parsed 417 manifests Total jars and classpath entries encountered: 417 Total not-existing referenced classpath entries cou
-
CLOB processing consuming large memory in temp tablespace
We are having a stored procedure, which is called from a Java process to enqeue a message in to AQ. The input for the procedure is CLOB. In some installations where oracle standard editions is used, the temp tablespace is growing in large volumes and
-
Adobe Acrobat and Reader digital signature verification error logs
Can you help me how enable and where Acrobat 9.2 and Reader 9.2.3 error logs to analyse digital signature certificate revacation (CRL, OCSP)?