Instructions on how to track mm price movements

Hi
I think you will not find detailed instructions how to disassemble a Portege M800. All what you can download is the user manual and technical manuals are not for public, I think they are only available for ASPs.
Anyway, as far as I know you have to remove the keyboard holder and two screws they are securing the keyboard. Then you can remove it.
But to be honest I would recommend contacting a notebook technician for help. Notebook disassembling isnt easy, its a little bit tricky and you have to remove a lot of screws. So you are on the safely side because M800 is pretty new notebook. ;)

Similar Messages

How to track the fast movement camera (close shot)

the shot is close to green screen and fast movement and camera cut off from the markers.
any ideas how to fix this ? i knew i mignt need to shoot again but its impossible cuz of the actors are not here anymore. so i must fix it.
any recommend plugin or technique ?

This shot will not track with any software I know of.
There are a host of problems that should teach you a valuable lesson. First, to automatically track you need fixed unique geometry that is big enough to grab at least 100 pixels of detail from. That means at least 10 X 10 pixels. There is nothing in the background of your shot in any frame except for a couple of tracking markers that come close to bing big enough to track. To do Camera Tracking you need to establish at least 2 planes that are far enough to calculate perspective and parallax changes. Your shot does not contain even one of the elements required to do camera tracking.
The only planes in your shot are the net in the background and the ned in the goal. Motion blur and fine lines in these two planes give you nothing to track. You also zoomed out from frame 7 to frame 12. NEVER EVER ZOOM if you are planning to replace a background or do a camera track. Especially, NEVER snap zoom. It is nearly impossible for camera tracking software to calculate a camera zoom when the zoom introduces blur. A snap zoom and fast pan is nearly impossible to track in the best of circumstances.
It's also going to be impossible to pull a clean key because the net in the background has a bunch of black lines on it and the white net in the goal gets completely blurred out in a great deal of the shot.
Just a little pre-production planning and some story boards would have saved the day. You have created a situation where your only option is to roto your actor and the goal frame, then recreate the net and the background by hand. What should have been a half hour in post is going to turn into a couple of days unless you redesign the entire shot to be something way more stylized. There's so much noise in the shot from the nets and the motion blur that RotoBrush will not track anything but a single frame. You are going to have to cut out your actor by hand and rebuild the background and adjust the position, rotation and scale by hand a frame at a time. Don't count on making any money on this shot. There isn't enough detail anywhere in this shot to even stabilize the shot to make it easier to roto. I tried.
If it were my project I would either leave out this shot or roto the actor, throw in a bunch of lighting effects and completely forget reality to turn this shot into a graphic instead of a movie.

HT1751 Followed instructions on how to consolidate iTunes library, move to external hard drive and restore library back up but my iTunes is still empty.

Recently bought a new macbook pro and obviously the first thing I want to do is move over my itunes library from my PC and keep my playcount.
The instructions I followed are here: http://support.apple.com/kb/HT1751?viewlocale=en_US&locale=en_US
As I got down to Step 7 in 'Restoring your iTunes Library backup', I chose my iTunes library file and waited for everything to be restored but then nothing came up on my iTunes. My iTunes is still empty.
Is there perhaps another way for me to transfer my iTunes library and my playcount will still be retained? Help on this would be greatly appreciated.

Recently bought a new macbook pro and obviously the first thing I want to do is move over my itunes library from my PC and keep my playcount.
The instructions I followed are here: http://support.apple.com/kb/HT1751?viewlocale=en_US&locale=en_US
As I got down to Step 7 in 'Restoring your iTunes Library backup', I chose my iTunes library file and waited for everything to be restored but then nothing came up on my iTunes. My iTunes is still empty.
Is there perhaps another way for me to transfer my iTunes library and my playcount will still be retained? Help on this would be greatly appreciated.

How to find to stock movements

Hi,
Can anyone tell me how to track the stock movements ie receipt -issue = balance ..
my issue is , in mb5b when i gave date selection as 01-04 to 30-04 - my stock bal is 1500 Kg, where as in mat master (a/cing view ) for period 1 2009, the stock showing as 0 , as well in table mbewh also 0 .. so in this case tell me how i can prove that the stock becomes zero??

thanks jurgen,
I'm comparing the stock as of 1-4 to 30-4 (i.e period 01), here my stock in MM03 (period 1 only) is zero where as in MB5B it's 1500 kg (for 1.4 to 30.4) ??? how this will happen and how to track it?? and i checked there is no document posted in may as posting date as april.. there is no such doc,.what ever posted and entered in april only..
Edited by: UJ on May 7, 2009 12:37 PM

Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
Thank you.
Best Regards,
Gerald

Hi Gerald
This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
P.S Please do not post your e-mail address here.
Taylor

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick

Can not take a screenshot with Maverick and track pad. can not use apple chat to talk with a tech. there are other issues also like I used to be able to go back a page with the delete button. No Maverick PDF to instruct on how to use Maverick
THE use of the apple support is a mess also.
I want to be able to use my MAC fully and easily like I used to with Snow Leopard.
What is wrong with this maverick OS?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

How to add href track in quicktime mov file (win xp )

Hi,
I am trying to add href track in quicktime mov file (win xp )by following the instructions given on
www.apple.com/quicktime/tutorials/hreftracks.html
I want to popup url automatically while playing the mov file.I have added this text file as href track in mov file
content of url.txt file are
A<http://www.yahoo.com>
and follow exactly the same steps given in www.apple.com/quicktime/tutorials/hreftracks.html
But when i run the final mov file with href track it is not popping up the url www.yahoo.com automatically .
Please help me out i have stuck in this situation badly
Thanks in advance
Thanks again
Jawad Haider
Windows XP

Hi,
I am trying to add href track in quicktime mov file (win xp )by following the instructions given on
www.apple.com/quicktime/tutorials/hreftracks.html
I want to popup url automatically while playing the mov file.I have added this text file as href track in mov file
content of url.txt file are
A<http://www.yahoo.com>
and follow exactly the same steps given in www.apple.com/quicktime/tutorials/hreftracks.html
But when i run the final mov file with href track it is not popping up the url www.yahoo.com automatically .
Please help me out i have stuck in this situation badly
Thanks in advance
Thanks again
Jawad Haider
Windows XP

I don't no much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rentented another movie, now I want to get it from pc to iPad....help be much appreciated...

I don't know much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rented another movie, now I want to get it from pc to iPad....help be much appreciated...

Did you rent the film directly on the iPhone ? I've never rented films, but from : http://support.apple.com/kb/HT1415 :
You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
If you've rented a film on your computer's iTunes then you should be able to sync it to your iPad from your computer's iTunes via the Movies tab that shows on the right-hand side of iTunes when you've selected the iPad 'device' on its left-hand side

Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.

Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

How do I export a Movie to Quicktime? And do I need to?

Hello, how do I export a Movie in iMovie 11 to Quicktime, when the option is not listed?
I have created some short videos with Lavelier Line6 mic, which apparently records your voice in stereo on one track, I am told (although I can't see stereo tracks anywhere within iMovie project, it looks like one track below the picture - but then I wouldn't know what to look for as I'm new to this!).
I need to, I am told, export the final movie to Quicktime, in order to create a mono track rather than stereo. I can't see how to do this, as Quicktime is not an option in my Share menu (facebook etc is there, but not Quicktime).
Could someone advise me whether I need to do this at all? Is a movie soundtrack automatically converted to mono if there is only one track?
(Also, there is a small amount of hiss in the recording, which I have removed with background noise reduction, but could that hiss come from the unused track, does anyone know? And if so, what is the best way to get rid of that track? Of course, it may not be that at all! I don't really want to get into complicated removal of audio tracks into other software and then readding to the picture, if I can avoid it.)
Thanks for any advice you can give. Fran x

Use "Share to File".

How can i convert 3d movie into 2d to watch it in mac

i have a movie with mkv file playable on vlc how can i convert the movie into 2d

There are now a bunch of them out there. Do a Google search for "mac 3D conversion" They tend to be around $35. I have been using iSkysoft products, which have been fairly easy to use. They have a "iMedia Converter Deluxe for Mac" that besides the 3D to 2D conversion, will also convert video to 70+ formats, has a 1-Click Video Downloader, and a single click Rip DVD and Burn to DVDs feature. Also claims to be "Ultrafast" all for the same price others apps are that only do the conversion.

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

How do I separate short movie clips loaded from my digital camera to iPhoto 11 at the same time pics are downloaded and how do I get those video clips to a dvd that will play on a dvd player

When loading pics to iphoto 11 from my camera, occassionaly it will include some video clips with the description of Movxxxx. I wonder if someone could direct me to some straight forward instructions as to how to transfer these video (movie) clips, which now exist in iphoto, to a dvd that will play on a dvd player as one might expect to see a video play, including the audio that was captured at the time of filming.
Thanks in advance for any assistance you can offer this novice.

You need to open iMovie and it will have a event library called iPhoto Videos, click on that and the videos will load in the window next to it, then you make a new project in iMovie. Then open iDVD and make a new project then import the movies to the program then burn to a DVD..

How to track costing in Production order

Hello Everyone
I would like to get some details about how to set the product costs for Finished Goods and also how to track the expenses like packaging, labor, electricity, other charges etc, for individual production order.
I have created the labor and packaging as a non inventory item and have used it in the BOM, now after the production order is closed, i find these two costs to be in the Actual Additional costs as shown below, till this is great.
But the requirement was, when they want to view the expenses or a month, then they require individual split up of costs against each production order. Is this even feasible?
Please require help from you guys.
Appreciate your help in this regard.
Thank You

Product Costing
The cost of a FIFO or moving-average product is the sum of its component costs and additional costs (such as labor and overhead). To ensure accurate calculations of product cost, even if the components were issued manually, SAP Business One uses the cost of the items issued to production order and not the cost of the items currently in inventory. This avoids differences between the actual cost of components used in the order and the value of the product.
Note
The cost calculation method described here is relevant only for standard and special production orders, but not for disassembly for companies managing perpetual inventory.
In the case of disassembly the components enter the inventory with the same cost as the items currently there. If the component is managed by FIFO, the cost of the oldest layer is used.
The cost of returned components does not change; it is the cost of the last one that was issued.
The product cost calculation is determined by the item management method.
Standard – When the product is managed by standard cost, no calculation is made, and the cost is copied from the item master data upon report completion.
Moving Average – When the product is managed by moving average, two figures are required for product receipt into inventory: receipt quantity and total value added to the inventory. The total value is the product cost, which is the sum of all component costs used for those products.
FIFO – When the product is managed by FIFO, each report completion opens a new cost layer for the product in the inventory. The quantity in the layer is the quantity of the products just reported as completed. The cost of the products is the sum of all component costs used for the completed products divided by the quantity of the products.
On every report completion, the system checks the following three quantities for each manually issued component:
Issued Quantity – The quantity already issued to the production order.
Used Quantity – The quantity already used for the completed products (completed products multiplied by the base quantity of the component).
Needed Quantity – The quantity needed for the products that were just reported as completed (quantity of products reported as completed multiplied by the base quantity of the component).
If the Used Quantity is greater than or equal to the Issued Quantity, this means that all items issued for the production order have already been used, and the Needed Quantity is yet to be reported as issued from the warehouse. Since the cost of the items that were actually used for the products is unknown, SAP Business One takes the current prices from the inventory.
If the Issued Quantity is greater than the Used Quantity, SAP Business One finds the cost of the components that were issued and not used, and uses them in the calculation of the product cost. When finding those components, the issuing order of the components is taken into account, meaning that the first components to be issued are the first to be used. The components following those that were used are the first to be used for the cost calculation.
If the sum of Needed Quantity and Used Quantity is greater than the Issued Quantity, meaning that not all needed quantity was issued, SAP Business One needs to make an assumption for those items’ costs, so it takes the current prices from the inventory.
Upon the completion of a production order, on the Production Order Window: Summary Tab, you can check the product cost figures of the production order.
Regards
Kennedy

How to track my stolen ipad?

how track my stolen ipad?

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Instructions on how to track mm price movements

Similar Messages

Maybe you are looking for