Instrument driver for agilent 8960 to run CDMA tests

Hi, just wonder if there is an instrument driver for agilent 8960 to run CDMA tests? I know 8960 has E1963 and E1968 driver, but 1963 is designed for W-CDMA and 1968 is for GSM/GPRS/EGPRS. So is there a driver designed for CDMA mode? Thanks a lot!
Solved!
Go to Solution.

Unfortunately, it does not appear that there currently is one.  When I search the Instrument Driver Network I only find the two drivers that you pointed out.
Brandon Treece
Applications Engineer
National Instruments

Similar Messages

  • Instrument driver for Agilent E5061A network analyzer

    Is there a instrument driver for the Agilent E5061A network analyzer ? I couldn't find one neither on NIs Instrument Driver Network nor on Agilents site.
    We are using Labwindows/CVI as development system.

    Yes we are talking about the same driver, but i dont know why hp871x.c file was removed. However, hp871x.h and hp871x.fp are included.
    Anyhow, look this comment into hp871x.cpp file:
    In addition, if WIN32 is defined, _CVI_ may also be defined to indicate that the program is being compiled under LabWindows CVI.....
    I guess it is not so hard to modify this source code (from hp871x.cpp to hp871x.c). Sorry for disturb you!!!
    "Only a life lived in the service to others is worth living..." - Albert Einstein

  • Anyone has an instrument driver for Agilent E8364 50GHz PNA

    Does anyone have a working instrument driver for the E8364 50GHz PNA? I am currently tryin to use the agpna instrument driver downloaded from NI but i am having errors. The PNA balks that the "query is unterminated" and then the VI times out. Please let me know if you have a working instrument driver.

    Is this the driver you are downloading?
    If so,
    - Are you running the Getting Started VI to test communication?
    - Did the ID query pass?
    - Make sure you have VISA 2.6 or later installed.
    - Try running NI-spy with with the Log to File option enabled and post the spy capture.
    NI Spy Tutorial

  • Looking for Labview driver for Agilent 4294A (HP)

    Help!
    I've been browsing the driver database looking for the Labview GPIB driver
    for Agilent(formerly HP) 4294A Gain-Phase Analyzer.
    Does anyone know where I can get it?

    Hello all,
    NI is interested in developing LabVIEW and CVI drivers for the Agilent 4294A. I have been trying to obtain one of these units on loan from Agilent for the past couple of years with no success. If anyone can spare their 4294A for the duration of driver development or can influence Agilent to loan a 4294A, NI will write certified CVI and LabVIEW drivers for it.
    Jason Hobbs
    Instrument Drivers

  • Looking for LabView 6i GPIB-USB-A driver for Agilent E7401A

    I am looking for LabView 6i GPIB-USA-A driver for Agilent E7401A EMC ANALYZER.

    Hi,
    There is a driver for this device available for downloading from the National Instruments Instrument Driver Network. Here is a link to the download page:
    Multi-Environment Certified IVI Instrument Driver
    Unfortunately, however, this driver is only available for 7.0 and 7.1. Unless someone else on this message board has created one for 6i, you will need to create your own.
    The other option is to upgrade to LabVIEW 7.1, which I highly recommend. There are many improvements over LabVIEW 6, including Express VIs, Event Structures, and many others. You can see the new funtionality of LabVIEW 7.1 with a free online demo version at this link
    Try LabVIEW 7.1 FREE Online
    If you are interested in upgrading, you can call your National Instruments Technical Sales Representative at (888) 280-7645. Have a great day, and good luck with your driver search.
    -John M

  • Looking for instrument driver for HP3561A (Using LabView6.1)

    Hello,
    Is there anyone out there has the instrument driver for HP3561A. I know there is one available in the ni.com/idnet however, that one runs only on a higher version. Can someone tell me is there any other options?
    Regards,
    Daniel

    Look again. There are 6.0 and 7.0 versions available for download.

  • How should i modify the hp54600a instrument driver for GPIB so i can use it for RS232 interface ?

    I try to modify the hp54600a instrument driver for GPIB, so i can use it with RS232. But somehow it didnt work. When i try to run the initilize it, the prgoram show VISA read error (time is up before the process is finish). How should I modify the VI so I can use it with RS232 interface ?

    First, check the instrument's user manual to see if the GPIB and serial command sets are the same. Also check to see what EOS(End of String) characters the instrument requires. Then, do a loopback test to test communication in LabVIEW.
    Search Results: Serial Loopback Test
    Ray K
    NI Applications EngineerMessage Edited by Molly K on 02-18-2005 10:57 PM

  • Do you have an instrument driver for E4418 Power Meter

    I am trying to find an instrument driver for one of our power meters so as to be able to add a datalog capability to it to store time stamps and readings

    Hi Moe,
    I was able to find a driver for you on Agilents site. You can check out http://we.home.agilent.com/cgi-bin/bvpub/agilent/e​ditorial/cp_MiscEditorial.jsp?LANGUAGE_CODE=eng&LA​NGUAGE_CODE=eng&COUNTRY_CODE=ZZ&NAV_ID=-11956.5368​80169.03&ID=1000000710:epsg:sud&JPID=/find/xbv_sud​_vxipnp for the details.
    Hope this helps out Moe!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Trouble using the instrument driver for the "hp8753b"

    I am using the instrument driver for the "hp8753b", specifically the "collect and display data" driver.  I manually set my settings to the analyzer and run the VI (i.e. set start frequency to 500 kHZ and stop frequency to 1 GHz), when the VI runs with the "collect and display data" it defaults to start frequency 1 GHz and stop frequency to 3 GHz.  I have tried to modify the driver to only collect data and not to modify any settings on the analyzer but I run into errors.  Any help on this is appreciated.

    Hello,
    I have installed the instrument driver you mention in your post. I am looking at the Collect and Display Data.vi, however I need more information from you to determine why your sweep is defaulting back to 1GHz-3GHz. 
    When you say "I manually set my settings to the analyzer" are you making these settings directly on the analyzer? The Collect and Display Data.vi seems to read all of the settings from the hardware, I did not see any configuration in the VI.  What modifications were you making to the VI and what errors were you getting?
    Can you see the range on the instrument?  If so , can you determine at which point the range defaults back to the higher range?  Running in highlight-execution mode in the VI and running NI-Spy (Start->All Programs->National Instruments->NI-Spy) to perform a capture of the GPIB commands can help to determine at what point the errors are occurring.  It will also let you see if there are any commands being sent which cause the instrument to be reset. 
    Jennifer O.

  • Where can I find a print driver for my e-mac running os9.2

    Where can I find a print driver for my e-mac running os9.2

    Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
    You must supply the printer make and model for people here to help further.

  • Looking for Keyence Instrument driver for LV.

    Looking for instrument driver for LV developed for the Keyence LS-7500 series micrometer. Has anything seen any or done this already? Any help would be greatly appreciated. BTW I have already checked NI's listing of instrument drivers to no success.

    Hello-
    There are no drivers listed for this instrument at http://ni.com/idnet. You may want to contact Programmed Test Sources to see if they have a LabVIEW driver for their instrument. If they don't, you can easily create a low-level driver by configuring an I/O assistant VI for each function in the manual. Once you have this low level driver you can just combine functions to make higher level VIs. Alternatively, you can hire an Alliance Member to write an driver for you.
    Alliance Member Directory
    http://www.ni.com/alliance/alliance_member.htm

  • HP 54501A - Instrument Driver for LabView v.7 or v.8

    Hi all,
    I'm looking for HP 54501A - Instrument Driver for LabView v.7 or v.8. I have NI gpib/usb controller installed, but cannot control the scope via Labveiw.
    The link I found at NI web site within drivers section seems to be broken so I couldn't download it!
    Please, anyone, suggest/help!

    The link you were given works for me. You can try it again. The given link brings you to a page where the CVI and LabVIEW drivers are listed. the direct link to the LabVIW driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9455659CE034080020E748... .

  • SCPI Instrument driver for LabWindows​/CVI ?

    Is there somthing like a plain SCPI instrument driver for LabWindows/CVI
    that works with all SCPI-DMMs ?
    Thanks,
    Manfred

    Manfred Schininger wrote:
    > "Kevin B. Kent" schrieb im Newsbeitrag
    > news:[email protected]..
    > > Manfred Schininger wrote:
    > >
    > > > Is there somthing like a plain SCPI instrument driver for LabWindows/CVI
    > > > that works with all SCPI-DMMs ?
    > > >
    > > > Thanks,
    > > > Manfred
    > >
    > > SCPI like any other standard is typically non-standard.
    > > You can try to get a DMM driver and it will probably work
    > > for the most part with any DMM. There may be some
    > > slight differences and some features may not work on all DMMs.
    > >
    > > I might suggest you look into IVI drivers. These follow SCPI for the most
    > > part. You get the drivers for each DMM you want and then you have a
    > > configuration
    file that tells the program which DMM you are using.
    > > It then loads the appropriate driver.
    > >
    > > Kevin Kent
    >
    > Hello Kevin,
    >
    > thank you for your answer.
    > Unfortunately there is no specific instrument-driver for the DMM I'd like to
    > use (Keithley 2700). As I understand this would be the precondition for the
    > IVI base classes to work. My hope was to find a simple SCPI instrument
    > driver to get into the advantage of instrument independence. But you are
    > right, I also once made the experiance that the "SCPI standard" isn't
    > completely perfect.
    >
    > Manfred
    Manfred,
    You could look for a driver for another Keithly model or try one for a
    different brand. They may be similar enough to modify easily. I realize this
    goes against the idea of SCPI and standards but it is the best we have now.
    Good Luck
    Kevin

  • Looking for LabVIEW driver for Agilent (HP) 4349B High Resistance Meter

    I've been looking for a LabVIEW driver for Agilent (HP) 4349B High Resistance Meter.
    Does anyone have one?
    Thanks,
    Avner

    Hello,
    It looks like you'll get a reply by Friday; if not repost and I'll follow up for you
    Thank you,
    JLS
    Best,
    JLS
    Sixclear

  • Need an instrument driver for Stahl product

    Hi guys!
    I need an instrument driver for the coil temperature measurement device ER-230.01B (company Stahl)!
    Does anybody of you have this driver?
    I have already searched in the NI Driver list and couldn't find it.
    Thx,
    Nobby

    Hi Nobby_83,
    Unfortunately we don’t have the driver for your Stahl device. You have to contact Stahl to know if they have the driver.
    http://www.stahl.de/en/start.html
    Benjamin R.
    R&D Software Development Manager
    http://www.fluigent.com/

Maybe you are looking for

  • Using LR CC/LR Mobile with multiple computers

    Is there a way to see files synced with LR CC on my iMac using LR CC on my MacBook, the same way I can see them using LR Mobile on my iPad/iPhone?     My iMac has my main library in a RAID array, but I take my laptop everywhere, and would like the ab

  • Why won't my Mac Pro read a burnt copy of Photoshop CS5?

    I just got myself a Mac Pro. From upgrading my old G4. My Mac Pro is a 2 Dual-Core Intel Xeon 2.66 ghz Version 10.6.8. With a SONY DVD RW DW-D150A Drive and a NVIDIA GeForce 7300 GT graphics/display. So I have plenty of requirements to run CS5..I thi

  • Where can i get a wallet like case for my iPod touch fourth gen.

    So, I am getting a fourth gen. iPod touch for x-mas, and i need to get a case that is wallet like or durable. Are there any brands that you think are well made, durable, long lasting, etc? please let me know what you have or what you have had in the

  • LabView PDA module gives error "unable to lock memory chunk"

    I've written a LabVIEW PDA Application that reads an ASCII decimal string through a PDA serial port. I can display the string ok, but when I try to convert the string to a number using the decimal string to number VI I get the error message "App fail

  • HPCM: Calc Script Deployment Error: java.lang.indexoutofboundsexception: In

    I am trying to deploy the allocation calc scripts in HPCM and ran into the indexoutofboundsexception. Does anyone know how I resolve this? I have successfully deployed the calculation database. This is version 11.1.1.2. Cheers, Below is the relevant