Instrument I/O assistant doesn't work, i've installed its driver after labview

I've installed labview 7.1, NI DAQ740CD1 & CD2 and Instrument I/O assistant's driver. But when I open the properties
of Instrument I/O assistant i have an error message which says that i have to installed Labview 7.0 before the Instrument I/O assistant's driver(i've done it). I desinstalled and reinstalled this driver but after the operations, the same message is still here.
i tried to do something else. i've desintalled labview and all the drivers. the Labview installation program prompted me to insert the National Instruments Device Drivers CD. i clicked "cancel" (it's said on the notice) and i've installed the NI 488.2 Driver, the NI DAQmx Base Driver, NI DAQ740CD1 & CD2 and Instrument I/O assistant's driver. I have always the same message. Why ant what can I do??? I need to have the output "TokenName" on the Instrument I/O Assistant and it's not here.

Hello,
Which driver have you on your computer ? You can see them in MAX >> Software. Which is version of ni-visa, ni-488.2 ?
What kind of protocol do you want to use : gpib, serial, parallel ?
What ahhpens in AMX when you test your communication ?
What are error code and error string ?
Regards,
Isabelle
Ingénieur d'applications
National Instruments France

Similar Messages

HT4796 link to migration assistant doesn't work. Where can I find it?

link to migration assistant doesn't work. Where can I find it?

Do you mean the link in the article to Apple Support Downloads? It works for me, now, and should take you here:
If not, try this one: http://support.apple.com/kb/DL1557
Sometimes an Apple server won't find the article you want immediately.

Mac Powerbook with HP 5510 printer. Scanner doesn't work since I installed Lion

Mac Powerbook with Lion. Scanner doesn't work since I installed Lion

What kind of computer is it? Powerbooks can't run Lion. MacBook perhaps?
With Lion, all scanning is performed through Preview. Use Preview.

How can i uninstalled adobe creative suite on my old computer that it doesn´t work now and installed adobe on my new computer?

how can i uninstalled adobe creative suite on my old computer that it doesn´t work now and installed adobe on my new computer?

use the adobe uninstallers to uninstall from your old computer, and use the installation files to install on your new computer.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.

Compressor 4 doesn't work since I installed Mavericks and I can't export a video normally on FCPX either.
Can someone help me?
Thank you!

Got the phone direct from the Apple website, so I assume it was unlocked, and it had been on giffgaff ever since but I don't see why that's a problem?
The carrier was automatically selected as Free and is up to date.
There seemed to be no problem that the SIM was being used in an iPhone 4 and my friends in exactly the same situation (e.g. arriving in France and moving over to the Free network with iPhone 4's) have had zero problems with their 3G network; it just seems to be me.
The Free Mobile Network is included on this list which I guess means that they are Apple-approved? iPhone: Wireless carrier support and features
How do I find out whether or not I would need to manually configure an APN? I'm not even sure I know what that is.

Oracle 8i Pers.NT (admin assist doesn't work)

I have trouble with the administrative assistant. It doesn't work. No errors,it simply just doesn't activate. O/S is Win NT 04. Any advice would be appreciated.

I have trouble with the administrative assistant. It doesn't work. No errors,it simply just doesn't activate. O/S is Win NT 04. Any advice would be appreciated.

Acrobat XI Download Assistant doesn't work !

i download the exe file but it doesn't start or do anything .
Even if i change browser , turn on coockies , reinstall java or Adobe reader it doesn't work !

Finally after 2 day i downloaded the file ( even if not in my language ! ) !
surprise !!
I can't belive it !!
It supports Windows XP SP2 and doesn't support windows Vista !!
it is incredible !!
how can Adobe continue working in such way ???
i can continue hate adobe reader and continue using other software instead of it !

The Adobe Download Assistant doesn't work!

So, whatever happened to a direct download link? hmmmm too easy lol. this download assistant does not work at all. I turned off all firewalls, downloaded the (***) and got to the license agreement and ok'd it and it wouldn't start download. Yes I did download to Desktop for all so that it has full permission. Now I had to go to support, receive 2 files that I have to download, combine in one folder, then unzip and then install. Just for a trial. I would be scared to handover $100-$600 for a full product and have to jump through this many hoops!! Why did Adobe make downloading such a pain in the behind with it's (***)! lol here's a thought:: KISS keep is simple...shall I say silly just to be nice

Troubleshoot Adobe Download Assistant
Direct Download Links for Adobe Software
Mylenium

Migration Assistant doesn't allow me to choose what drive.

Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
I wanted to migrate one particular drive from there (called Current work).
First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
I turned on the new computer and a message appeared: you must restart.
That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
They say migrate folders, settings but re-install applications.
And it migrated also another drive called "Scratch" which has only personal date no system, no software.
Anyway, I erased everything and re-installed using the Install disk that came with the computer.
BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
I had to go to Disk utility and erase, then re-install OS X.
Then re-install the applications using "Install applications" (the other disc that came with the computer. )
OK, I did that. Then while everything is empty, new, I used Migration Assistant.
Now here is the reason why I post this.
They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
I didn't try but read that it has to be SATA.
Is it the same ? In migrating they say hold down the T-key (T for target)
And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

Photo booth doesn't work since lion installed

what's up. photo booth doesn't work since i dowloaded lion. Help

aquaman wrote:
My mac IS up to date.
No reason it should have stopped working. Maybe a problem waiting to happen and an upgrade pushed it over the edge. Provide some specs on your Mac, but I would really advise making an appointment at the Genius Bar at your local Apple Store.
Good Luck
Pete

App doesn't work once i install it

I created an app using project siena, when i do a preview within the app it seems to work perfectly fine, but once i install it, it doesn't show some of the images and even the search functionality doesn't work, but everything works when i preview within
project siena.. pls help!!

Hi ami123,
Could you please provide the following information:
Where the images are stored (MyPicture folder, other folder, web site). Ideally copy the path to one of these image.
How do you reference them in Siena (via Excel table, directly, etc.) ?
The type of image (JPEG, PNG, etc.)
Thanks,
Olivier

TS5216 My camera doesn't work in any apps at all after 10.8.5

The iSight on my new MacBook Air won't work in any apps at all after the 10.8.5 update, and the system profiler says that there is no camera plugged in.
Before the update the camera worked on the built in apps such as Photo Booth, but not in Skype. So I found this article (http://community.skype.com/t5/Mac/Camera-not-Working-on-MacBook-Air-today-s-last -version/td-p/1927641) and that fixed it. But after the update nothing works, and I believe it's because of the solution the Skype forum suggested.
Does anyone have some good tips for me?
Edit: The OS X Mountain Lion 10.8.5 Supplemental Update did not solve the problem

After the original (flawed) update to OS X 10.8.5 was installed, the internal camera of a 2013 MacBook Air would not work in Skype and some other third-party applications. The flaw was fixed in a supplemental update. However, if you followed some questionable advice that was circulating on this site to hack your system before installing the supplemental update, then it will not restore camera functionality; in fact, the camera won't work at all. The solution in that case, most likely, is to install the 10.8.5 Combo update.
In the future, I suggest you ignore advice to hack your system by replacing, removing, or changing built-in system components.

Passport doesn´t work with osx 10.6.8 after last update

Hi,
I have installed the last update of OS 10.3.1. Now I am not able to sync the passport with BBLink anymore. The passport ist not detected by the mac anymore.
I am using Mac OSX 10.6.8 with BBLink 1.1.1.35 and it workt pretty fine so far. After i had installed the update and connected the passport to the Mac comes the message "... no drivers found ..." to the screen. It wants me to install BBBlend.
After a reset to the original OS-Version it is still not possible to connect the passport with BBLink. The access to the SD-Card ist still working.
Does anyone have an idea whats going on?
Sascha

Well so much for Backward Compatibility on BlackBerry and Apples part, they think we are all loaded with $$$ and can afford to buy a new computer every 4 years.
That is why more people are not buying new phones or taking the updates because the updates break the compatibility.
Looks like the only solution for you may be to buy a new computer, ⏏⏏⏏ I wonder if you had a iPhone if you would have the same issue, ⌘⌘⌘
I wish I could have helped you more, I have a over expensive, crapple Apple, Mac Book Pro, Mavericks 10.9.5 with performance issues, I am not very happy also.

The airport assistant doesn't work on my PC

Hi everybody,
I am a little bit sad cause I have a problem with my Pc and my AirPort Express Base...
what I have :
IBM Thinkpad T42P
Win XP pro + sp1
a lovely AirPort Express Base
I bought this base few days ago, and everything worked very well (airTunes, printing, and internet)... Yesterday, I formated my hard drive and I set up again the airport assistant and .... this assistant do not see my aiport Express base anymore....Moreover, at the starting of this assistant, there is a message which say that that an error occurred when the windows try to use the wireless Networking system. Cool !
Nevertheless, windows see the base but i can't access it. The base was set up with VPN...
I reset the base, and set it up again with WEP... I did the same with my PC and set windows up again...
The result is not good . The assistant tell me the same message and do not see the base. However, windows see my base and i can use the internet connection !!! oooo !!!
Now, i want to use the airTunes ! How ?
Should I set up win XP SP2?
Please help me........
excuse my english...
Thanks...

This problem will go away if you do both of the following:
1. install Windows XP service pack 2
2. download and install the Airport 4.2 update from:
http://www.apple.com/support/downloads/airport42forwindows.html

Transferring contacts on backup assistant doesn't work. What can I do?

i Downloaded the backup assistant on my old phone, tried to,download contacts on new phone and it doesn't happen. What can I do? LG Cosmos3

We want to make sure you get your contacts back, JahnA. Have you logged into your online account at http://www.vzw.com/myverizon to check if the contacts are saved in the "My Device" section? What phone model did you previously have?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Instrument I/O assistant doesn't work, i've installed its driver after labview

Similar Messages

Maybe you are looking for