Insufficient content when cutting from sequence as individual clips

When cutting from one sequence into another, with an in point set on the source sequence and an in and out set on the program sequence, I get a "Insufficient Content for Edit" error.
This occurs when I have the "Insert and overwrite sequences as nests or individual clips" toggle deselected (so as to cut in the individual clips, not a nested sequence). If I select this toggle the edit works, but obviously as a nested sequence, which I do not want.
Is anyone else having this issue?

We are getting nested sequences whenever we try to cut in a sequence that is more than a minute or two long.  We can't get it to cut in anything but a nest for longer clips and if the in/out points are in excess of four minutes, Premiere crashes.
Do you get the Image/cache error?
I have contacted Adobe customer service.  They kept me on the line for an hour deleting my settings and playing around and never found a solution.  So far all we can do is cut in little tiny bits at a time.
I wonder if your problem is similar, how much material are you trying to cut in?

Similar Messages

  • Error message when cutting a sequence into a sequence

    When we try to cut a sequence into another sequence, we either get a nested sequence (the nest tool is turned off) or we crash with this error message:
    We are in Premiere Pro 2014.2 with our media on a server.  I moved the entire project to  my local drive and tried it that way but had the exact same result.
    I switched the General Settings and changed the Mercury Playback Engine to software only.  It did not help.  I have no unlicensed plug ins and cleared my media cache.
    I've spoken to the Adobe help line (!argh!) but he was unable to fix the issue.  He did delete all of my settings I was starting at the defaults.  This did not help either.
    Has anyone any experience with the above error message?
    Thanks.

    Yes.
    I see now that I can paste into the layer I am copying from, but not into any other layer. If I lock my source layer, I can't paste at all.

  • Limited documents folder content when accessed from Apple preferences

    When setting up desktop background, the Apple/ system preferences/ desktop /choose folder/documents route shows only two files(modified yesterday) and not the complete documents file content that is viewable from Finder.
    Why should the two be different? This is a recent occurence, as the full file content has been viewable in the past.

    Looks like a bad attempt to rename Home folder caused my problems. Now done successfully and no problems experienced.
    Thanks for any thoughts on the issue.

  • Audio clips change when moved from sequence to sequence in FCP7

    Working on a documentary piece within FCP7 and am having problems with moving audio from one sequence to another. Both sequences have the same settings, but when I copy the audio clip and paste it into the new sequence, the audio that pastes is from the same clip but is not what I copied. Does anyone know why this is happening and/or how to fix this?

    Just to back up Michael. The native sample rate for video is 48khz. To work at anything other than that is to ask for problems.
    x

  • Lost gmail folder content when transferring from old mac to new

    I got a new Mac Pro recently and used Migration Assistant to transfer everything from my old mac to the new one.  Everything worked fine except in my gmail account.  None of the mailbox folders I set up transferred.  How can I get them onto the new machine?

    If I activate 2-step verification now, would it somehow allow me to access the "lost" gmail folders?
    No. Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the line below on this page to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

  • Has anyone had aperture lose your album content when upgrading from aperture 2 to 3?

    I was using Aperture 2 then wanted to get all my pictures to iphoto, so I upgraded to aperture 3 to so the databases would be swapable to iphoto.  In that process up updating Aperture all of my photos are still in aperture, but all of my albums are now empty.  So I lost all of my organization.  Any ideas what happened and how I can undo it?  I did not have a time machine backup and did not backup the database before the upgrade.

    You may try to repair your Aperture Library. This should have been done before upgrading, because a corruption of the library can cause problems when upgrading, but perhaps you can still fix the missing albums. Use the Aperture Library First Aid tools (see: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual) to repair permissions and repair the database, or to rebuild it, if necessary. But make a backup of the library, before doing this, just to be safe.
    Regards
    Léonie

  • Ora-01031 insufficient privileges when update from a join table

    Update (select a.f1,b.f2 FROM tableA a join tableB b using(fk))
    set f1=f2
    the connection user just have readonly privilege for the tableB, but the sql never to update the tableB, why Oracle raise the error?
    How can I implement the update logic ?

    dotAge wrote:
    Update (select a.f1,b.f2 FROM tableA a join tableB b using(fk))
    set f1=f2
    the connection user just have readonly privilege for the tableB, but the sql never to update the tableB, why Oracle raise the error?
    How can I implement the update logic ?Try this syntax
    UPDATE tablea a
    SET    f1 = (SELECT b.f2
                 FROM   tableb b
                 WHERE  b.key = a.key)HTH
    SS

  • Losing content when cutting, pasting, typing

    I'm a content provider going through rough times with my new MacBook Pro. I type something - it disappears, slides, even email get instantly if i move the cursor on send, but don't click. I'm wasting a lot of time trying recovering pages of lost work. the pages scroll uncontrollably fast. I have no control over trying to read or write a story. If anyone has a solution or has a patch that can fix this, please direct us to the right place. I'm really having a tough writing my book because of this crazy problem.
    David

    Hi, bbw49. In the interest of getting the basic facts straight (the better to help us help you), let me point out that if you have a new MBP, it can't be running OS X 10.5.2, and if your MBP is running 10.5.2, it can't be one of the new unibody MBPs to which this forum is devoted. Please post the correct basic specs for the machine you're having trouble with: processor speed, OS version in use, and model identifier. (You can find them all in About This Mac > More Info, at the top of the Apple menu.)

  • How to get FCP to recognize an animation sequence, not individual clips ?

    Hello All;
    Could someone tell me how to get FCP to recognize a .png animation sequence (Exported from After-Effects) ? When I place the directory or files onto the timeline, I get a project 27 minutes long, rather than 10 seconds like it should be. I know this must be easy and I'm just missing something.
    Tim

    You exported a .png image sequence from After Effects?
    Three choices:
    1) In Final Cut Pro, click anywhere in the 27 minute long timeline and type Command + A to select all the clips. Once they are all selected Control Click on any one of the selected clips, and from the drop down menu choose Duration. Set the duration each clip is supposed to be ( 1 frame? 3 frames?) and click OK.
    2) In Final Cut Pro, go to the menu Final Cut Pro > User Preferences. When The User Preferences open, click on the Editing Tab. Set the Still/Freeze duration to the duration you want for each of the stills in your image sequence and click OK. You will then need to re-import the stills, and they will now each be the new duration. This does not work on the stills you have already imported- you need to import the stills again.
    3) Open Quicktime Pro (Quicktime Player 7) and go to the menu File > Open Image Sequence. . .
    Navigate to the first frame of your image sequence and click Open. You will be asked to pick your frame rate. Set that and click OK.
    When it opens, go to the menu File > Export and the Save Exported File As . . . window will open. Choose the codec you want for your animation (Pro Res, most likely) and, determine a location for the file and click Save. The image sequence will be exported as a Movie in the frame rate and codec you chose. Import that movie into FCP to edit or composite.
    MtD

  • Why do I lose video content when exporting/backing up a video clip to DVD in iPhoto?

    I am transferring/backing up my iPhoto library to a DVD.  When I do this, I see the "content" of any video clip does not transfer. By this I mean I can see the image identifying the clip on the DVD but the "time" is 0:00.  Can someone pls advise how to get this content to transfer so I can eliminate these clips from the iMac?  Thanks!  (I have Mac OS X 10.7.5 and IPhoto 11 9.4.3)

    How are you backing up the library?  Are you exporting the photos to a DVD or a folder on the Desktop and buring that to a DVD?  If so be sure to select Kind = Original in order to get the actual video file.
    OT

  • Duplicate timecodes from sequence onto new clip

    I have the same long interview footage in HDV and Cineform (initially I was trying to edit the Cineform in CS3, now using CS5.5)
    I have made lots of edits, transitions etc with the Cineform footage that I am happy with but I have realised that my sequence settings are not correct and the footage appears to look better when encoded direct from the original HDV
    Is there a way I can keep the current edits but apply them to the HDV clip rather than the Cineform one in a new sequence: i.e. use the timecodes from the cineform footage to edit the HDV footage automatically (clearly the timecodes for the two versions are identical)
    Thanks for the help
    Nick

    There is no easy, automated way to do this--essentially, you're talking about a roundabout proxy workflow. Pr isn't the best when it comes to such workflows, unfortunately.
    The simple but tedious way is to drag one of the HDV master clips to the matching Cineform clip in a sequence, hold down Alt+Shift, and drop it on the original Cineform clip; this will do a match frame (using timecode) replace edit.
    You could also replace each Cineform master clip in the bin (one by one, unfortunately); just right-click a Cineform clip in the bin, select Replace Footage, and navigate to the matching HDV clip. This shouldn't be too bad if your Cineform clips all used the original HDV file names; the extensions will, of course, be different.
    You could also hack the project file XML to replace all the Cineform instances--but that can be a bit hairy (though a lot faster). That involves your HDV and Cineform files having the same file names, though. If they don't, either of the above are your best course of action.

  • Hello. I appreciate your help. I am in FCP7 and trying to do Boris Vector Shape effect. When I try to pull the  vector shape square from the view window to the Superimpose, I get the message: insufficient content for edit. Why?

    Hello. I appreciate your help. I am in FCP7 and trying to do Boris Vector Shape effect. When I try to pull the  vector shape square from the view window to the Superimpose, I get the message: insufficient content for edit. Why? I did this effect before and everything worked well. Thank you for your help.

    Make sure that you have no active I/O markers on the Timeline (use Option X keys to clear them).

  • My sequence will not show up in Color 1.5.3 when sent from FCP 7

    I cannot get clips from FCP 7 to show up when sent to Color. I had been able to get this to work perfectly fine earlier, but now for some reason, when sending a sequence from FCP to Color, Color doesn't automatically create a new project with the sequence in it. I've Googled for answers as much as I can, but cannot figure out what's going wrong.
    By the way, the footage is from a Canon 7D, imported into FCP from PluralEyes 8.
    EDIT: I've tried to manually export the XML from Final Cut into Color. Color will not even recognize the exported XML file. I've done what others have suggested online and deleted my Color & FCP preferences files out of my User/Library. I've created new FCP projects and tried to send to color from a new project. None of these have helped at all.

    I just had this exact same problem.  Clips from my FCP 7 sequence would not show up when I sent them to Color 1.5.  No way.  No how.
    I solved my problem (at least for now) by simply restarting my machine.  I realized that it had been running for days, and it probably just needed a reboot.  Try it.  It might work.
    And yes, I'm running Mountain Lion, too.  10.8.2.
    Good luck!  ----Todd Ruel

  • When printing from web pagess, right margin cuts off print, cant seem to reconfigure. Frames select on print choices does not highlight for printing options. What will help?

    Using a Dell Dimension E310 with Windows XP and Dell photo 924 Print/Scan/Copier. When printing from web pages on the browser the right portion of the print is cut off. It appears that the "folders" frame on the left side of the page is always printing with the page, which cuts off the print on the right side of the main page frame by the width of the "folders" frame. When I select the print command, the choice for selecting a particular frame to print is on the drop down menu, but is not highlighted for use. We have had this problem with Firefox for some time. Printing from IE or Word, etc. does not produce the same problem. We like Firefox otherwise. What is the fix?

    You're right: most web pages do not use frames, so that option usually is not available.
    I don't know why a page that printed just the main content before would change to printing with useless sidebars. Can you try the site in Firefox's Safe Mode and see whether it prints/previews correctly there?
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, try starting Firefox in Firefox
    [http://support.mozilla.com/kb/Safe+Mode Safe Mode]. Be careful not to "reset" anything permanently if you didn't back up.
    Does that fix it? If so, the difference usually is caused by one of your add-ons. You can restart the regular way and disable all non-essential add-ons here:
    orange Firefox button ''or'' Tools menu > Add-ons
    In particular, check the Extensions category.

  • LabVIEW 13.0f2 crashes when cutting text from certain free labels on the block diagram

    While revising the documentation of a VI, I faced a LabVIEW crash. I can reproduce it in LabVIEW 13.0f2 with the following code.  Can anyone confirm that cutting the content "def" from the free label and trying to paste it in the free label with "ghi" produces error 0xBC0BF185?
    I cannot reproduce this issue by any other cut/paste between the free labels on the left-hand part of the BD.  The crash solely occurs when cutting "def" and trying to paste to "ghi".
    Solved!
    Go to Solution.

    I'm not reproducing it from the snipette. LabVIEW 2013.0f2x32 on Win7 enterprise. Heap Peek your copy, there is something insane with your label.
    Whoops.... I take that back.
    Crash report sent- d77e8fae-e15f-45d7-9bc5-d125970a4119
    Jeff

Maybe you are looking for