Insufficient data sent error in Adobe Reader XI and Adobe Reader X

I have an issue that is happening with several users that I support. It is only happening in a specific program that they use. When they open PDFs, they get the message insufficient data sent and then a blank document opens. I noticed that this seemed to be an issue a couple years ago, but it was apparently solved with recent releases of Adobe reader. I have installed and set up Adobe Reader XI and Adobe Reader X, but the results are the same and very intermittent. It can happen when trying to open a document and then not happen 10 seconds later on the same doc. The company that provides the online program blames Adobe. Where do I proceeed from here?

Hello,
unfortunately it's a reserved document. I'll try to reproduce the issue with a different design and, if possible, I'll post a link to it.
Thank you!
Best regards,
SV

Similar Messages

I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.

Hi all,
I am using Adobe Pro 11 and on opening a pdf I am getting error 'Insufficient Data for an Image'. Please help and provide a workaround if the solution not there.
I have already set the preferences to for page view to low zoom settings, and page fit view settings, but it never opens the pdf. Please check and provide a solution asap.
Thanks in advance!

Most of the documents have sensitive info on them. I will have to do some looking for some that i can share, but will get something to upload (dropbox) as soon as I can.
Thanks for you help.

About Adobe Flash Player and Adobe Reader

Hi folks,
Archlinux 86-64 2007-08-2
SeaMonkey 1.1.6,
I need to install Adobe Flash Player and Adobe Reader
I found following link;
http://wiki.archlinux.org/index.php/Ins … _on_Arch64
But not for Seamonkey. Does it work on Seamonkey. Besides it's flash plugin. Would it be the same as Adobe Flash Player?
Does 32bit Adobe Reader works on 64bit Seamonkey. Where can I download it? Where can I find its installation document?
TIA
B.R.
satimis

ghostHack wrote:
Assuming you had run
updatedb
before doing
locate ndiswrapper
it looks like the package didn't build. Go back to your nspluginwrapper directory and run
makepkg
as your user, if this completes successfully it should create a file called something like
nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz
probably in the current directory. It may fail initially due to unsatisfied dependencies but you should be able to install them using pacman since I think all the lib32- stuff is in [Community] now.
Thanks for your advice.
Ran;
$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core is up to date
extra is up to date
community 330.8K 132.5K/s 00:00:02 [#####################] 100%
archlinuxfr 26.2K 24.3K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace gstreamer0.10-alsa with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-cdparanoia with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-vorbis with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-gnomevfs with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-ogg with extra/gstreamer0.10-base-plugins? [Y/n] Y
:: Replace gstreamer0.10-flac with extra/gstreamer0.10-good-plugins? [Y/n] Y
:: Replace gstreamer0.10-gconf with extra/gstreamer0.10-good-plugins? [Y/n] Y
:: Replace gnome-keyring-manager with extra/seahorse? [Y/n] Y
warning: libgnomeui: forcing upgrade to version 2.22.1-1
resolving dependencies...
looking for inter-conflicts...
:: cairo conflicts with cairo-lcd. Remove cairo-lcd? [Y/n] Y
Remove: cairo-lcd gstreamer0.10-alsa gstreamer0.10-cdparanoia
gstreamer0.10-vorbis gstreamer0.10-gnomevfs gstreamer0.10-ogg
gstreamer0.10-flac gstreamer0.10-gconf gnome-keyring-manager
Total Removed Size: 3.63 MB
$ sudo updatedb
No complaint
$ ls nspluginwrapper/nspluginwrapper/
PKGBUILD nspluginwrapper.install rpmextract.sh
$ cd nspluginwrapper/nspluginwrapper
Built the package as user
$ makepkg
==> Making package: nspluginwrapper 0.9.91.5-3 (Wed Apr 16 10:13:38 HKT 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm...
--2008-04-16 10:13:38-- http://gwenole.beauchesne.info/projects/nspluginwrapper/files/nspluginwrapper-i3
86-0.9.91.5-1.x86_64.rpm
Resolving gwenole.beauchesne.info... 88.191.25.183
Connecting to gwenole.beauchesne.info|88.191.25.183|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 52386 (51K) [application/x-rpm]
Saving to: `nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm'
100%[================================================================>] 52,386 27.0K/s in 1.9s
2008-04-16 10:13:42 (27.0 KB/s) - `nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm' saved [52386/52386]
-> Downloading nspluginwrapper-0.9.91.5-1.x86_64.rpm...
--2008-04-16 10:13:42-- http://gwenole.beauchesne.info/projects/nspluginwrapper/files/nspluginwrapper-0.
9.91.5-1.x86_64.rpm
Resolving gwenole.beauchesne.info... 88.191.25.183
Connecting to gwenole.beauchesne.info|88.191.25.183|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 58545 (57K) [application/x-rpm]
Saving to: `nspluginwrapper-0.9.91.5-1.x86_64.rpm'
100%[================================================================>] 58,545 9.56K/s in 6.0s
2008-04-16 10:13:49 (9.56 KB/s) - `nspluginwrapper-0.9.91.5-1.x86_64.rpm' saved [58545/58545]
-> Found rpmextract.sh in build dir
==> Validating source files with md5sums...
nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm ... Passed
nspluginwrapper-0.9.91.5-1.x86_64.rpm ... Passed
rpmextract.sh ... Passed
==> Extracting Sources...
==> Entering fakeroot environment...
==> Starting build()...
./usr/lib/nspluginwrapper/i386
./usr/lib/nspluginwrapper/i386/linux
./usr/lib/nspluginwrapper/i386/linux/libxpcom.so
./usr/lib/nspluginwrapper/i386/linux/npviewer
./usr/lib/nspluginwrapper/i386/linux/npviewer.bin
203 blocks
./usr/bin/nspluginwrapper
./usr/lib/nspluginwrapper
./usr/lib/nspluginwrapper/noarch
./usr/lib/nspluginwrapper/noarch/mkruntime
./usr/lib/nspluginwrapper/noarch/npviewer
./usr/lib/nspluginwrapper/x86_64
./usr/lib/nspluginwrapper/x86_64/linux
./usr/lib/nspluginwrapper/x86_64/linux/npconfig
./usr/lib/nspluginwrapper/x86_64/linux/npwrapper.so
./usr/lib64/mozilla/plugins/npwrapper.so
./usr/share/doc/nspluginwrapper-0.9.91.5
./usr/share/doc/nspluginwrapper-0.9.91.5/COPYING
./usr/share/doc/nspluginwrapper-0.9.91.5/NEWS
./usr/share/doc/nspluginwrapper-0.9.91.5/README
251 blocks
==> Tidying install...
-> Removing info/doc files...
-> Compressing man pages...
-> Stripping debugging symbols from binaries and libraries...
==> Creating package...
-> Generating .PKGINFO file...
-> Adding install script...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: nspluginwrapper (Wed Apr 16 10:13:50 HKT 2008)
This time NO complaint.
$ ls
PKGBUILD nspluginwrapper-i386-0.9.91.5-1.x86_64.rpm pkg src
nspluginwrapper-0.9.91.5-1.x86_64.rpm nspluginwrapper.install rpmextract.sh
But
nspluginwrapper-0.9.91.5-3-x86_64.pkg.tar.gz
can't be found
I can't find 'alien' and 'dpkg' on repo. With them I can convert .rpm package to .deb package and install the later with with dpkg. Or is there any way on Archlinux?
Any suggestion? TIA
B.R.
satimis

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Cannot open CS6 Bridge. Always the same ERROR: Bridge has a problem and cannot read the cache

Try this. This is for CS6 but substitue CC and Bridge 6.
~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
Adobe Bridge Plug-in Cache
and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
(both files will refresh itself after a restart of Bridge).
To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
also drag this file to the trash.
Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
Choose reset prefs and try again.

I have just downloaded firefox 3.6.11 and adobe flashplayer update and adobe reader update. Now I cannot get firefox to open. I have tried removing the program but when I try to do that it says that I need to close firefox - but of course it is not open

I have just downloaded firefox 3.6.11 and adobe flashplayer update and adobe reader update. Now I cannot get firefox to open. I have tried removing Firefox but when I try to do that it says that I need to close firefox - but of course it is not open. I have waited a long time but nothing has happened so I am getting desperate Thanks -- Jerry

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I have Adobe Reader X, Adobe Acrobat 9 and Adobe Distiller 9 all installed, remove older versions?

I have Adobe Reader X, Adobe Acrobat 9 and Adobe Distiller 9 all installed on my computer. Should I uninstall older versions? I am running on Windows XP Professional. Thanks,Kim

Hi there,
Distiller 9 is a part of Acrobat 9. Acrobat 9 and Reader X can co-exist on the same machine. Unless you're having a problem, there's nothing wrong with having them both installed together.
-David

Adobe Reader XI and Adobe Reader X Pro (Editable PDF Combobox Search is not working properly.)

I have created Editable PDF using itext(5.3.0) in java. I have used Adobe Reader XI and Adobe Reader X Pro. But in editable PDF combobox search is not working properly.
It's only search first character.

My (admittedly old and slow) system did this too the first time I opened Reader 11, but it "unfroze" after about fifteen seconds, (an eternity in computing time, I know, but it did eventually open all the way) What you're seeing on the right is the "Tools" panel initializing. That's exactly where mine would freeze up on starting. Once it did finally open fully, I clicked the "Tools" link at the top to close the panel, and I opened and viewed a document that way, then closed reader. Now when I open Reader, the Tools panel doesn't initialize and it opens immediately.
Reboot and before you open anything else, open Reader. When you open it, DO NOT try to do anything with it until it fully opens, don't click anything, don't try to switch to another app. Give it time to open fully, and then click the Tools link to close it. Then, open and view a document, and close it. Close Reader and reopen it. the Tools panel should remain closed and Reader should open fully immediately.

Adobe Creative Cloud and Adobe Creative Suite: New Choices for Customers

Adobe has announced the new Cloud-based model for software distribution, along with new terms for boxed product upgrade eligibility. Beginning with the CS6 releases, when they happen, upgrade pricing on boxed products will only be availble one generation back. There is a limited window to upgrade now to the current versions at a discount.
See http://blogs.adobe.com/conversations/2011/11/adobe-creative-cloud-and-adobe-creative-suite -new-choices-for-customers.html

Eugene:
Based on the current information we have (from the blog post), which may not be correct and which you should not rely upon:
There is some confusion about the word "discount." As used in the blog post, in general there are no "discounts" for upgrades, there is the upgrade price and there is full price. But, also in the blog post, there is a special "discount upgrade" if you choose to upgrade to CS5.5 today (prior to Dec. 31, 2011), which is 20% off the regular upgrade. However, Peter used the word "discount" to distinguish between upgrade pricing and full price. It's probably a good idea to avoid using that word there because of the potential for confusion.
I have CS5 InDesign in work. So I will be able to upgrade that to CS6 when it comes out at the discount price?
You will be able to upgrade to CS6 at upgrade pricing. Not the 20% discount, but it is "discounted" from the full price of CS6.
I'm still using CS2 Illustrator and Photoshop, for the little work I do in those programs, they're fine. But if I want to upgrade them to CS6 I have to pay the full amount of an upgrade, with no discount... or will I have to pay for CS6 in full for both of these programs?
You will have to pay the full price (not the "full amount of an upgrade," whatever that means).
If you elect to upgrade to CS5.5 prior to Dec. 31 of this year, however, then then you can pay the discounted upgrade price to upgrade to CS5.5 (well, CS5 since Photoshop CS5.5 doesn't exist), and then you can pay the CS6 upgrade price in March/April. So you can pay for no upgrades (full price) or two upgrades (one of which is 20% off).
At the moment I can upgrade CS2, photoshop and Illustrator for €240 each, to CS5. So wouldn't I just be able to do that now and then buy the CS6 upgrade at a much later date perhaps just before CS7 comes out?
Yes, you can do that.
If CS6 has the tools to basically go "File>Export>Epub" and I get a fully working epub file without having to trash about in code afterwards or make complex tagging in InDesign, then I'll be buying it.
It looks like EPUB is evolving pretty fast, so even if ID CS6 fully supports what you want out of EPUB on Day 1, I bet you'll need to be prepared to postprocess it on Day 2. Or at least long before Day 200.

I just installed adobe creative cloud and Adobe Bridge.

I just installed adobe creative cloud and Adobe Bridge. When I try to open a image in camera raw I get an error "Bridges parent application is not active" "Bridge requires that a qualifying product has been launched atleast once to enable this feature"

Have you opened Photoshop? (I think that is a "parent" application)

ADOBE PDF PACK and ADOBE SEND

I just sent a message, but not sure if it was received. CAN SOMEONE, PLEASE, CALL ME AT TEL # 646-250-8452. I am having issues with PDF files that I sent by Adobe Send. ethe party receiving the e-mails is unable to open the files. I just purchased the ADOBE PDF PACK and ADOBE SEND two days ago and I spent all morning trying to resolve this issue, I also called the toll free number, but there is over an hour wait. PLEASE HELP!!!
thank you,
Jerry Vasquez

Yes, you'll need Acrobat Pro. (which has the optimizer) to reduce the file size of a PDF.

Adobe Download Assistant, and Adobe Ilustrator CS6

Please remove this program from this computer. It downloaded (taking up a lot of time), and now I find it can not help me make the conversion I'm after, and it's stuck on my computer- it won't remove or uninstall.
Don't ask me to go to FAQ because it won't SOLVE the problem.
You have the technology to download it so, so now take it back!
I'll try your products on a new computer.
Mel1nda

Dear Mr. Wright,
I appreciate your concern. But again, please wipe out anything about me on your database. To make a long story short, my patience endured through telephone conversation with an agent (for which I waited about one full hour.)
The chats also failed to address my problem.
You have the technology to resolve the issue of Adobe Assistant, and the Adobe Illustrator. It just became a dead and wasted presence on my computer.
Next, I know when I should visit the FAQ. I don't need to do that.
I appreciate your E-mail, but to me it seems that sloppy organization is a result of poor inter-department communication.
A good chunk of your revenue comes from little people like me. I'm not oversimplifying the matter; you do have the resources to trouble-shoot. But from what I had experienced, too many of your agents were ill-equipped to advise; and when they do make the effort, they tell me what I already know, or I get cut off when trying to pull out the ID number of that transaction.
I might try it again when my new computer arrives, or- I will not do business with Shutterstock anymore.
With all due respects,
Melinda de los Santos
Date: Sat, 9 Jun 2012 12:18:37 -0600
From: [email protected]
To: <removed by moderator>
Subject: Re: Adobe Download Assistant, and Adobe Ilustrator CS6 Adobe Download Assistant, and Adobe Ilustrator CS6
Re: Adobe Download Assistant, and Adobe Ilustrator CS6
created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Mel1nda this a public forum so you may not always receive an immediate response through this support channel. Which operating system are you using? This will allow myself or another forum member to provide you with the appropriate directions to remove the software.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Adobe Download Assistant, and Adobe Ilustrator CS6
To unsubscribe from this thread, please visit the message page at Re: Adobe Download Assistant, and Adobe Ilustrator CS6. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have Adobe Acrobat Proffesional and Adobe Reeader. When ever I open a document it closes on its own in about 10 seconds. How do I fix this?

I have Adobe Acrobat Proffesional and Adobe Reeader. When ever I open a document it closes on its own in about 10 seconds. How do I fix this?

Windows 7.
Adobe Acrobat 8 with the Original DVD.
Adobe Reader X1 downloaded off Adobes site.
Both versions of adobe close after 10 seconds or so once I open a PDF file. I started having this problem about 2 weeks ago. Everything else if fine with the computer
I have run various virus scans. Haven’t found any issue.
Regards,
Dave

I use Adobe Photoshop Elements and Adobe Bridge. Do these come in a package together?

I'm going to update my current set up. I use Adobe Photoshop Elements and Adobe Bridge. Do these come in a package together? What would be the best way to go about this upgrade?

Bridge comes with Photoshop but not with Elements.

Background Task on Adobe Photoshop Elements and Adobe Premiere Elements Organizer "hangs"

I recently upgraded my software from Elements 10 to Elements 12 and had a bit of trouble. Apparently both 10 and 12 have a way of launching an executable in the background which tends to get "stuck" on my system. I believe the problem may be related to the network configuration and software mix I live with, but I need to confirm my suspecions and find a way to control the problem. Here is what I know... I have always experienced a lot of problems using Elements with my NAS device which is a 1TB usb 2.0 connected disk system attached to my Linksys E3000 Router. When I got the router, the BIOS software did not correctly support NTFS file systems, but subsequent updates eventually made this possible if you formatted the removable drive on a system in NTFS, you could then hang it on the router and "see" the contents, serve them via Windows Media Player, or iTunes, etc., etc. from a computer atteched to the network, or via wirless directly off the router. I archived all my photos out on this file system and have successfully indexed it for use with Adobe Photoshop Elements and Adobe Premiere Elements Organizer, but... When I went to install Elements 12 software I tried to install it without first removing Elements 10, and on a system which had run Elements 10 since the last full reoboot. During the install of 12 under "shared services install" the installation process "Hung" on a background task with a name like "AdobeElementsAnalyzer.exe" which only shows up in Windows 7 task manager as a running process, not as a full program, but because the file was locked by the system, the install hung. I eventually figured out that I needed to start the install of Elements 12 software immediately after having rebooted so that this program was not present in the background, and succeeded in completing an install of Elements 12 on my Windows 7 X64 system. This system required a "special" software download for Premiere Elements, but not for Photoshop Elements which is only apparently avaliable under 32bit emulation mode. I finally got the "shared components" portion of the X64 Premiere Elements to complete an install, and then set about verifying the onversion/upgrade of the indexes to my photos and video stored out on the NAS. The same rogue task which prevented me from doing the install showed up agian, taking all the system resources away from my dual processor Intel chip and refusing to let go. I was forced to terminate it from the task manager. I strongly suspect that my "issues" are in part due to the extrordinary network latency imposed by the drive connection I'm using to index my photos and videos, and I'm looking for a better approach to using the editors against my master catalog of files, as well as figruing out just what I need to do to insure that all the files I have stored on the drive are accessible by the organizer when I need to pull a copy to work on.
A complication is that I have two "legacy" Windows XP systems on my network, a reasonably fast Windows Vista Business desktop, and the Windows 7 X64 processor system which is the most powerful system I have. The Windows file security enhancements to NTFS changed from XP, to Vista, to Windows 7, so files which get saved to the NAS disk inherit a variety of different levels of security under windows. I have occasionally gone to one of my old XP boxes and "wiped" the security settings by resetting everything via Windows XP. Because the NAS is so slow, this process can take several hours and must not be interrupted by attempts to do anything affecting the NAS by any of my other networked computers. To avoid problems with my photo archive, it makes sense to me to do all my editing on copies which have been extracted from the NAS archive and stored on the C: drive (boot drive) of my Win X64 system.
What I seriously need to know is this: When/If I define a "watched" portion of my file system, rather than taking the time to manually import every little change to my photo archives, can I expect the Photoshop Elements Organizer to work properly as long as everything stored on the NAS is stored via the same system which runs Elements with the same active "user" in control so that all the windows 7 file security settings putting stuff on the mapped NAS drive remain properly secured under Win 7 X64? Frankly I don't care if the files appear "read only" to every other system and identity on my network, but I do need to be able to "see" them. I have been able to view slide shows and movies stored on the NAS via both my networked iPad, my Apple TV, and using Samsung's funky android and Windows compatible software. Frankly, I doubt that Microsoft or Apple has full understanding and control of the environment where there is no host "server" other than the eprom based stuff my Linksys E3000 loads to emulate early Windows Media Management architecture, but I mange to get it to work as long as I don't try anything sophisticated with the file permissions. As a fall back, can I expect individual "imported" bits out on the NAS to remain stable if indexed and used only by the Elements Organizer running on my Win 7 X64 system?
I am seriously considering converting an old WinXP desktop into a UNIX box which could be configured as a "Server" for everything stored on the NAS and be done with my problems in return for the power required to run the server all the time so stuff is there when I need it. Any recommendations?
Message was edited by: [email protected]

Adobe hasn't said whether it officially supports PSE 7 on Windows 7. But reports are starting to trickle in that PSE 7 works fine on Windows 7 for most people, though a couple people have reported crashes. My PSE 7 seems to work fine, though I primarily use PSE 8 now. This is all very preliminary, and we'll learn more as more people post here.

Chrome windows 7 do i need both adobe plugin 10 and adobe flash player 11 active x

using chrome, windows 7 do i need adobe air, adobe plugin 10 and adobe flash player 11 active x? or is that why i am constantly getting a shockwave crashed message?

htrimm wrote:
do i need adobe air, adobe plugin 10 and adobe flash player 11 active x?
If you have any AIR apps, you will need the AIR runtime; latest version is 14.0.0.110.
"adobe plugin 10" means nothing; what program is it referring to?
Flash Player 11 is outdated; the current version is 14.0.0.145.

Insufficient data sent error in Adobe Reader XI and Adobe Reader X

Similar Messages

Maybe you are looking for