Insufficient Disk Space error during installation of OEPE
I tried to install OEPE under Oracle Linux 5. During the installation, I got the "Insufficient disk space error" saying there is only 0MB available at my home directory. I checked my disk space and found that was not the case. I have no clue why I got this error and how to solve the issue. Any help would be appreciated.
[lixuxu@slc01pne ~/download]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/xvda1 144G 19G 118G 14% /
tmpfs 5.8G 0 5.8G 0% /dev/shm
slcnas411:/export/home1/lixuxu
6.0T 3.5T 2.6T 59% /home/lixuxu
slcavere01.us.oracle.com:/vol/ade_infra/prod/LINUX
96G 5.9G 91G 7% /usr/dev_infra/platform
slcavere01.us.oracle.com:/vol/ade_infra/prod/GENERIC
96G 5.9G 91G 7% /usr/dev_infra/generic
slc1001nap:/vol/local/x86/redhat/50_prod/packages
1.1T 1023G 58G 95% /usr/local/remote/packages
slc1001nap:/vol/local/linux/redhat/packages
1.1T 1023G 58G 95% /usr/local/redhat/packages
Hi,
Are you using the the all-in-one installer or the one which includes WLS as well. Do you face similar issues when installing Eclipse JEE package ?
thanks
Raj
Similar Messages
-
Insufficient disk space error during export
I've been exporting approximately 1,200 photograghs (975 MB) to a Desktop folder which I copy and then burn to a DVD for playback on a Windows PC without difficulty for the past several months. However, I'm now receiving an error message stating "insufficient disk space for that operation". What's happening? I receive the error even when attempting to export 50 photograghs (25 - 30 MB).
iMac G3, 600 MHz, 768 MB SDRAM, slot loaded Mac OS X (10.3.9) Netgear WGR614 v6 wirelrss router, Dell Dimension 510 PC, HP 6980, cable modem, Epson 3490 scanner
iMac G3, 600 MHz, 768 MB SDRAM, slot loaded Mac OS X (10.3.9) Netgear WGR614 v6 wirelrss router, Dell Dimension 510 PC, HP 6980, cable modemI have edited most of the JPEG files with PE4. Could this be causing the trouble?
Possibly. Check your Edit->Color Setting menu window and see if you've got color management turn one. Mine looks like this. If it's not set to manage then some of those files may not have a profile. To correct this you can either reedit each and save to embed the profile or, much easier, download the Automator application "Embed sRGB Profile" from Toad's Cellar, unzip and drag the original files that need it onto it. It will automatically embed the profile.
Were the files you tried to export the same as before or a new bunch? Had then been editied? -
Erroneous "insufficient disk space" error with WaveStudio 7
This has been bugging me for over 2 years. I get the "Insufficient disk space" error with Vista x32 and x64 and now with Windows 7 x64 when I've edited a wav file and then try to save it. I have plenty of disk space.
I've searched till I'm blue in the face but cannot find an answer and am tired of the lame work-around. I know how to copy and paste the entire edited wav into another file and then save it. It's annoying, but it works. What gets me is why is this not fixed?
Running CTWave.exe as administrator does not work. Running in Windows XP SP3 compatibility mode does not work.
I have been a faithful Creative Labs user for more years than I care to remember, but this one is shaking my faith. Is there anybody who can explain why this happens, or offer a fix?
Many thanks and keep on rockin',
DaveYou may wish to try these steps in order to solve your issue:
1. Make sure your computer has the latest Java runtime. To do this, just google search "Download Java", go to the first URL and download that free software. This step should solve most of the "insufficient disk space" problems.
2. If step 1 failed to work, you can open "My computer", right click on the hard disk you were trying to write your files into. From the "File System" tab, check to see it's "NTFS" but not "FAT32".
3. If the above two steps do not work, try creating a new partition from your primary hard disk. To do this, click "Start" -> then right click "My Computer" -> "Manage" -> "Disk Management" -> Make sure you shrink a new volume for at least 50 GB to 100 GB free disk space, again please have the NTFS file system. Once you successfully created this new partition, do a format then try writing your music files onto this Disk.
4. I think the above 3 steps are able to solve your issue. However, there's a bug I found sometime back when Win 7 first released. You can try creating a "temp" folder in your primary system drive, writing any files in there should have no problem as long as disk space is sufficient.
5. I certainly do not hope that error was caused by your anti-virus programme, but if all failed, you may want to consider temporarily disable your anti-virus software, and if everything works fine, you might want to switch to a new anti-virus programme.
Cheers.
Originally Posted by bghcomposer
Dave, I also have this problem. I recently bought new components for a new computer and put it together myself. I took Audigy 2zs Platinum Pro out of my old computer (if it ain't broke, don't fix it!) and put it in the new one. After getting the drivers and programs downloaded and installed, I too, have an "insufficient disk space" error. It also won't record - where it would work wonderfully on my other computer!
As a music teacher, I record piano parts for the students to sing to, but I can no longer do that! This would be a great fix! Hope someone responds with an answer!
Brian -
Insufficient Disk-space Error Installing WebLogic 1033_generic on Mac
How do I resolve this "Insufficient Disk-space Error" message I get while installing WLS1033? I thought I have more than enough disk-space on my system to handle just about any application software size out there. i mean, beside the 937.72 gigs of available disk-space on my system, I also have roughly 240 gigs external drive space. The system runs on 8 gigs of RAM. I know I am doing something wrong; just can't figure out what. I am new at WebLogic and so any help from the community is highly appreciated. Someone please help.
sblissAl
I got this error: "Unable to access jarfile wls1033_generic.jar" when I enter "java -Dos.name=unix -jar wls1033_generic.jar" in the Terminal command line. I very am frustrated. Please help me. Please advise.
One question: Is anybody able to install webLogic? I am just curious.
sbliss -
Deploy Image failed with "Unzip Failed:Insufficient Disk Space" error
I have installed the Application Management Pack para EBusiness Suite Release 2.02. When I tryed to do a Deploy Image procedure, we get the error:"Insufficient Disk Space"; but, we have 586 GB of space free in the filesystem.
I checked the /tmp directory and this was mounted on a file system that have free space. (256 GB free)
Regards,Do you sufficient disk space? If yes, log a SR and ask Oracle Support to provide you with the solution from that bug (as the solution is not available for public access).
Did you install all pre-req. software before starting the installation?
Note: 402311.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Microsoft Windows
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402311.1 -
IPhoto 11' insufficient disk space error on EHD
I have read previous discussions on this error, which did not fix my own problems. I have recently moved my iPhoto library to an EHD. The move went smoothly and I began importing more photos into the library. During one of the large imports I accidentaly unplugged my EHD which halted the import. I noticed it created an album in iPhoto saying "recovered photos". There were about 3,000 of them, and in the folder the photos thumbnails were not appearing. So I moved that folder to the iPhoto trash and emptied the trash. I also tried emtying the Finder trash as well.
At this point I started recieving the error "Insufficient Disk Space iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library."
My EHD has 1.76TB free of 2TB, and my MacBook Pro has 407.29GB free of 499.25GB. So this is not a space issue at all.
I noticed that there was discussion of problems with deleting large amounts of data at one time, I believe this is what I did. What can I do to resolve my issue?
Thank you,
Mimmers49As a test launch iPhoto with the Option key held down and create a new, test library. Try to import a new batch photos and test to see if the same problem persists. Does it?
If it doesn't then give this a go on your existing library:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database. -
CS6 Bridge Insufficient disk space error when on the domain
We have a windows domain enviroment, and we run iMacs for the design team. Using the newest Mac OS X we get the "Insufficient disk space to complete this opperation " error after loading images in Bridge and then try to change or saved them. When we are not connected to the domain, we can modify and save them locally fine. But once we log onto the Windows Domain (we have mapped drives using SMB links for storage) you can not use Bridge. Is this a cashing issue with the mapped drives or is this something else. I've only seen one other post on this and there was never a real fix.
They could use Brige fne on CS5 using the previous version of MacOS(in facct they still have to right now). So i'm not sure if it is a Mac os issue or a windows/mac issue. From what I understand the two macs (older laptop and newer laptop) are set up the same way with the mapped drives using the same Domain log in so the preferences are the same.
The new mac is loaded with an i7, and 16gb ram, and plenty of drive space so I know its not that.
Thanks for any help
Tumi-ITGuyAnybody have any ideas?
Not many here now about network set ups. Bridge is not designed for use over a network and also officially not supported by Adobe.
Bridge also uses a user specific library for its cache data.
This guy used to hang around here and has a successful set up for a network, try his blog:
http://imagearchivist.blogspot.nl -
"Insufficient Disk Space Error" Doesn't make sense
I'm sure there is a very easy solution here and I am missing something simple. I am trying to import my iPhoto Library into Aperture. In order to do this I copied my iPhoto Library onto my external, freeing up space for the Aperture Library.
Prior to importing, my
MacBook has 173.55GB of free space
iPhoto Library is 111.66 GB
At some point while importing I end up getting this message:
INSUFFICIENT DISK SPACE
There is not enough free space on your Aperture Library Volume to import the selected items. It is estimated that you need at least an additional 118431 MB of space.
This is usually after around 100GB has been imported and there should be about 10GB left to import and 60GB still showing free on my MacBook HD. The amount that gets imported prior to the error is always a little different.
Can anyone help me? I really want to start using Aperture but I can't if I can not import my photos.
Thanks.zblom wrote:
So if my Library is 111GB there is no way I can clear enough space on a MacBook with a 250GB Hard Drive?
Awesome, I think that should be in the system requirements somewhere.
You're right it should be. Perhaps it's not an across the board requirement. I think there's KB article on the topic, but I can't find it.
Having a library that takes half you start up disk probably isn't a good idea though. You should consider putting your library- or referenced images- on a fast external drive. I assume you're going to continue adding pictures so it's only a matter of time before you reach critical mass anyway.
DLS -
Insufficient disk space error on iPhoto 9.5.1 using iOS 10.9.4.
I am trying to import around 12,000 photos from an old computer and have so far imported 4,000. There are over 300 gigabytes free on the computer, and when I go to transfer more photos over I get the "Insufficient Disk Space" message and the photos do not transfer. All of the solutions I have found online are outdated, so I was wondering how to solve this problem now?
Thanks!As a test launch iPhoto with the Option key held down and create a new, test library. Try to import a new batch photos and test to see if the same problem persists. Does it?
If it doesn't then give this a go on your existing library:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database. -
I'm a new iPhoto user and get an error message about insufficent disk space when I try to drag photos in from an inserted CD of .jpgs. New iMac... shouldn't get this message. Tried the different library approach outlined in some of your threads with the same result
How much free space do you have on your hard drive?
Where are you dragging the photos?
LN -
Insufficient disk space / Error writing to Disk: when using photo library manager
First I couldn't open my iphoto library (again!) so I am rebuilding my library (again- 4th time). NOW I'm told I donot have sufficient disk space to import photos.
Using OSX 10-9-5 Memory 4GB
And just as I'm writing this I get Error Writing to disk memo
iPhoto cannot import your photos because there was a problem writing to the volume containing your iPhoto library.Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
If you select the disk icon for your hard drive on the Desktop, then Press COMMAND-I to open the Get Info window. In the upper panel it will show your drive's space statistics - Capacity, Used, and Available. It is the latter you are interested in to see how much space is left on the drive. If you have less than 1 GB or so, then you must stop trying to write to the drive or you may corrupt it completely. -
"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b
Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi. -
Insufficient disk space error on vmware esxi when installing cucm
I have 85 GB to VM for ESXI Server and 75 GB to ESXi Server
If this is for a lab try using thin provisioning.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Why does WLS 9.2 installer say "Insufficient disk space!" on OS X w/122GB?
hi all,
i just installed mac os x 10.4.0 about 4 days ago onto a brand new 160 GB internal hdd. apart from some upgrades (10.4.9, java 1.5, xcode docs, etc.) the only other apps i've installed are eclipse 3.2 development ide & mozilla. that left me with 122 GB available on my hdd (as reported by "Get Info").
today, i tried to install BEA WebLogic Server 9.2 MP1 (the ibm aix generic installer). the installer for wls 9.2 comes as an executable jar file that must be executed from the shell. i executed the following command in the shell:
$ java -jar server921_generic.jar -log=/Users/myhome/logs/wls92_mp1_install_02_05_07.logthe installer gui loads, prompts me for the license agreement, some install folder locations (i told it to install to "/Users/myhome/development/bea"), etc. then, it reports:
<blockquote>
"Insufficient disk space! The installer requires: 5MB for the BEA Home at /Users/myhome/development/bea and 270 MB temporary work space at /tmp/bea30536.tmp. There is only 271MB available at /."
</blockquote>
ONLY 271MB AVAILABLE!!? how can that be?
so, i tried directing it to install to "/Applications/bea". i also started the installer with an option to use "/Applications/tmp" (which i created with mkdir) as an alternate tmp directory. this time with "sudo" - just in case:
$ sudo java -Djava.io.tmpdir=/Applications/tmp -jar server921_generic.jar -log=/Users/myhome/logs/wls92_mp1_install_02_05_07.logthis time its:
<blockquote>
"Insufficient disk space! The installer requires: 5MB for the BEA Home at /Applications/bea and 270 MB temporary work space at /Applications/tmp/bea30537.tmp. There is only 271MB available at /."
</blockquote>
what gives? on my solaris box, i can do "growfs" to expand the space available to a filesystem. is there some way i can do something similar on os x? or is there ANYTHING else to give "/" access to more of the 122 GB hdd space that is obviously available?
thanks in advance for your help.hi,
please take a look at "[url http://forums.bea.com/bea//thread.jspa?threadID=400003593&tstart=15&mod=1178464358368]HELP: Which command line args to launch Workshop 9.2 on Mac OS X 10.4?"
to summarize that thread: the generic installer does not come with workshop 9.2 or portal 9.2 because they are not supported on aix, hp or mac os x. weblogic server is not supported on max os x at all.
that thread also explains how i was able to get workshop 9.2 installed and running on os x:
"...i happen to have a working installation of wls & wlw
on my sun microsystem's sunblade 100 with solaris 9
(installed using bea's solaris_sparc-specific .bin
installer; which _does_ come bundled with the wlw ide).
so, i copied the wlw-related stuff (everything in
$bea_home/workshop92 & everything in
$bea_home/common/eclipse) from my solaris box to the
appropriate folders on my mac..."if you have (or can get access to) a working installation
of workshop that has already been installed on another
supported os, then you'll need to copy the
workshop-related stuff from the supported os to your mac;
like i described in the above thread. you'll need to keep
in mind that there are some os-specific plugins that come
with the supported versions of workshop; you will need to
replace those with their mac-specific equivalents.
if you click on my username in the top left-hand corner of
this post, you will get a list of posts i've made recently
that detail my experiences getting weblogic server 9.2 and
workshop 9.2 installed on mac os x. if you can
follow along with the info in those threads, you will
learn everything that i know about the subject. good luck.
let us know how you get on? -
Why might WLS 9.2 installer say "Insufficient disk space!" on OS X w/122GB?
hi all,
i just installed tiger about a week ago onto a brand new 128 GB internal hdd. apart from some upgrades (10.4.9, java 1.5, xcode docs, etc.) the only other apps i've installed are eclipse 3.2 development ide & mozilla. that left me with 122 GB available on my hdd (as reported by "Get Info").
today, i tried to install BEA WebLogic Server 9.2 (a j2ee application server). the installer for wls 9.2 comes as an executable jar file that must be executed from the shell. i executed the following command in the shell:
$ java -jar server921_generic.jar -log=/myhome/logs/wls92mp1_install_02_0507.log
the installer gui loads, prompts me for the license agreement, some install folder locations (i told it to install to "/Users/myhome/development/bea"), etc. then, it reports:
"Insufficient disk space! The installer requires: 5MB for the BEA Home at /Users/myhome/development/bea and 270 MB temporary work space at /tmp/bea30536.tmp. There is only 271MB available at /."
ONLY 271MB AVAILABLE!!? how can that be?
so, i tried directing it to install to "/Applications/bea". i also started the installer with an option to use "/Applications/tmp" (which i created with mkdir) as an alternate tmp directory. this time with "sudo" - just in case:
$ sudo java -Djava.io.tmpdir=/Applications/tmp -jar server921_generic.jar -log=/myhome/logs/wls92mp1_install_02_0507.log
this time its:
"Insufficient disk space! The installer requires: 5MB for the BEA Home at /Applications/bea and 270 MB temporary work space at /Applications/tmp/bea30537.tmp. There is only 271MB available at /."
what gives? on my solaris box, i can do "growfs" to expand the space available to a filesystem. is there some way i can do something similar on os x? or is there ANYTHING else to give "/" access to more of the 122 GB hdd space that is obviously available?
thanks in advance for your help.
p.s. there are no disk quotas or anything like that:
$ sudo quota
Disk quotas for user root (uid 0): none
$ quota
Disk quotas for user me (uid 501): none
i also ran repair permissions, just in case. same difference.
Message was edited by: l'il john l'concharoofound my answer!: java -Dos.name=unix ...
Maybe you are looking for
-
Mini DVI to Video Adapter - S-Video Resolutions / HDMI
Hello, I just got my Mini DVI to Video Adapter and I using a S-Video cable to plug to my HD LCD 32'' TV. When I connect everything, the resolution drops from 1280x800 to 1024x768. How can I change back to 1280x800? I don't know but I'm kind of disapp
-
Scheduled wake / lid closed
Got my Macbook Pro yesterday, and I'm having a blast! One question about sleep and wake issues though, sorry for the n00b ignorance. I have a program that I'd like to kick off to run at 5 AM every day. (It's Isilox, an app that downloads pages from t
-
Question about security issues regarding 'cp' and 'mv'
Ok, I wondered about how 'cp' and 'mv' are really working. I have some guesses but I need these things to be confirmed. Here is what I have: A partition with a unix file system, say ext2 or 3 (does this make a difference here?) containing *very* sens
-
Picking output type determination
Hello, In fact, the output type determined by the system for the picking is EK00. Now, I need to create a new output type and determine it or EK00 depending on the user (in order to use a printer on another). By the moment, I have created an output t
-
Download the J2EE AVK for FREE
Not again! What's that link doing on the "New To Java Technology Page"...Seesh...