Insufficient disk space or heap space on server

Has anyone face this problem before - what is the proposed solution or work-around.
==========================
" The server is running low on virtual memory. This could happen due to insufficient disk space or heap space on the server."

Hi
The message means exactly what it says. You are getting low on memory and Discoverer is paging to disk. This will cause severe performance issues.
On average you need to allot 85 Mb per Discoverer Plus workbook and 15 Mb per Viewer workbook that can be open concurrently. To this you can add the memory for the operating system and middle tier. After you have done the maths this number should not exceed 85% of your server's available memory. Of course, if you have other applications running on the server as well as Discoverer this will also have to be taken into account and is something I strongly discourage.
Can you work these out and report back how much memory you have on the server?
We may also need to increase the allotted disk space but first of all can you check the physical memory?
Best wishes
Michael

Similar Messages

  • Adobe Bridge CS5, error when creating contact sheet "There is insufficient disk space..."

    I am running Bridge CS5 for the first time and I receive this error when attempting to create a contact sheet. "There is insufficient disk space to complete this operation." The image files I am using are web optimized and very small. The error even occurs when attempting one small image. I have gone back to using Bridge CS4 and it works just fine. Any help?
    Thanks!

    I think I narrowed this down to having a network volume mounted with a share name of "Users".  The strange thing is even you if unmount the volume you will still have problems.  However, if you avoid mounting the volume entirely (from boot) it will be OK.
    The solution, it appears, is to rename the sharepoint to something other than "Users".  This worked for us.  I'm not sure if it matters whether the server is Windows or Mac OS.  In our case the sharepoint was an AFP volume on Mac OS.
    We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/.....  which made no sense at all.  However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
    So, another possible solution could be to grant file creation rights on the network volume "Users".  Another not-so-great idea.
    Hope that helps someone else!

  • RW-20001 Error: Unzip failed: Insufficient disk space:

    Hi ,
    I'm trying to install Oracle apps 11i on windows xp professional. I'm having 320 GB hard disk and 4 GB ram. I have divided into 3 partitions .
    C 60 GB
    D 120 GB
    E 140 GB.
    I've staged all the dvds into E Drive. I'm installing apps on D Drive. At the step 4 of 5 after 1200 file i'm getting RW-20001 Error: Unzip failed: Insufficient disk space: Please create enough space for the install.
    After I've pressed Retry It went to 60% to 80% and it was stopped from there it did not proceed further. Its saying Staring CVM on Middle Tier and strucked there.
    I'm totally new to oracle apps. Could any please help me out from this problem.
    Any suggestions to get past this would be appreciated.
    thanks & regards,
    Venkat.

    Hi,
    At what file RapidWiz gives this error?
    Please review the following document and see if it helps.
    Note: 786816.1 - Installing Oracle Apps 11.5.10.2, Fails With Insufficient Disk Space On Win2003 Server
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=786816.1
    Regards,
    Hussein

  • Javax.mail.MessagingException: 452 4.4.5 Insufficient disk space; try again

    I am getting this exception , while my application is trying to send mails. The complete stack trace is below
    com.bp.ebus.downstream.util.ErrorLevelException: javax.mail.MessagingException: 452 4.4.5 Insufficient disk space; try again
    later
    at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:879)
    at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:599)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:319)
    at com.bp.ebus.interfaces.SmtpClient.sendMessage(SmtpClient.java:252)
    at com.bp.ebus.interfaces.SmtpClient.send(SmtpClient.java:191)
    at com.bp.ebus.downstream.ejb.ServicesSessionBean.sendNewEmails(ServicesSessionBean.java:105)
    at com.bp.ebus.downstream.ejb.ServicesSessionBean_f7hinc_EOImpl.sendNewEmails(ServicesSessionBean_f7hinc_EOImpl.java:
    166)
    at com.bp.ebus.downstream.ejb.ServicesSessionBean_f7hinc_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
    at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    at weblogic.rmi.internal.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:85)
    at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:262)
    at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:229)
    at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
    at $Proxy4.sendNewEmails(Unknown Source)
    at com.bp.ebus.lighthouse.jobs.SendEmail.run(SendEmail.java:70)
    at java.util.TimerThread.mainLoop(Timer.java:435)
    at java.util.TimerThread.run(Timer.java:385)
    My OS is solaris and Application server is weblogic.

    The message is coming from your mail server.
    Looks like your server is out of disk space.

  • Insufficient disk space during index build?

    Hi All,
      I have a library of pdf documents on a network share that I am indexing weekly from my laptop (overnight).  Recently, the index build has failed with the error message "insufficient disk space".  I have contacted the server admin and I have been assured that we have many hundreds of gb free.  In any case, the available space is much larger than the size of the document repository.  As a test, I copied the entire library to my local hard drive and the index build worked perfectly.  I'm concerned that there is another network issue at play here that isn't apparent from the error message.
    I haven't found anything on Adobe's website on this error.  Can anyone help?

    Try emptying the TEMP folder. A lot of applications, including Acrobat use the TEMP folder as a temporary work space and it is limited by Windows.

  • Error: Insufficient disk space & file write permissions

    when my client edits a page and the click save i get the following error:
    the permissions for the includes folder are 755.
    I dont have this problem on other websites however and they are setup the same way.

    I am having the identical problem this week with incontext editing of a website I could edit fine last week with incontext editing but this week I cannot save changes to any page I try to edit, even though I've not made any changes to the site in the week since.
    If I Edit one page and try to save the changes, I get one of two errors:
    "The operation could not be performed because a problem occured while attempting to connect to the server. Please check your connection and try again."
    or
    "The operation could not be performed because there is insufficient disk space or the file write permission is not granted."
    I then went to the Incontext editing control panel, Manage Users, Configure Site and there I can click Test Connection and it reports it can successfully connect to the site using FTP. But when I try to Save that Configure Site (even though I've made no changes except to click Test Connection) I get two different errors each time I try...
    The first error reported was the unable to connect to the server error.
    "The operation could not be performed because a problem occured while attempting to connect to the server. Please check your connection and try again."
    or
    "Configure Site Error. An FTP error occurred. A test file could not be copied to the specified Host Directory. Your FTP user may not have sufficient permissions to access the folder and/or its content."
    I am 100% certain there is no problem on the server with insufficient disk space or file permissions, so this is an incorrect error message being reported by InContext Editing. I can connect to the site and make and save changes with Dreamweaver with the identical FTP settings. This site is on a server at GoDaddy that has plenty of disk space and I can see that all the permissions on site folders are set correctly.
    At this point I have a very frustrated client who is anxious to edit web pages but cannot.

  • Aperture: "Insufficient Disk Space" alert with 370 GB Free

    Hello,
    Since I use aperture on Mountain Lion, it's unpossible to import big folders anymore.
    The folders named "2012" is on my network and has 7 400 files (560 GB). I import it with option "In Their Current Location", so, it's no copy nor move. After checking, computer says : Insufficient Disk Space. Need 100 GB more". But HD is 370 GB free and pictures aren't copied/moved to my HD !!!
    With snow leopard, I don't have this prob, but Aperture update are no more available for SL.
    I work on a IMac with 4GB RAM and HD 500 GB with a Mac Server of 15 TB.
    Any suggestion ?
    Etienne
    Aperture 3.4.3 on Mountain Lion 10.8.2

    Ernie,
    1) Aperture library is on the internal HD with 370 GB Free. FS is Mac OS Extended (Journaled). The linked picture stays on a Mac Network fileserver with afolder per year. I make test with folder 2011 and folder 2012
    2) With LR, I don't import library from aperture but I import picture from folder 2012. And it's fine. LR library stays on the same HD/same partition than Aperture one.
    3) If I remove big TIFF file (273 MB) from 2012, it's OK.
    4) If I try to import 100 big TIFF File it's NOK : "Insuffisant disk space..."
    5) If I try to import 10 big TIFF File it's OK to import but zoom 1:1 gives a little picture.
    Etienne

  • Unable to perform a V2V to a CSV in Virtual Machine Manager if there is insufficient disk space on the local drive

    Server 2012 R2 with 60 Gb SSD mirror
    http://support.microsoft.com/kb/2685247
    does not work, as the attached vhdx storage never appears as volume in VMM / Fabric / Host / Properties / Storage
    Disk shows there, but no volume (even one was created)
    VMM / Fabric / Host / Properties / hardware / Storage there is NO vhdx disk for "Making the
    new storage Available for Placement in VMM"
    Any other ideas?
    Seb

    Hi Sophia,
    KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
    PS C:\Windows\system32> Enable-DedupVolume "E:"
    Enabled            UsageType          SavedSpace           SavingsRate         
    Volume
    True               Default            26.95 MB             0 %                 
    E:
    PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
    Type               ScheduleType       StartTime              Progress   State                 
    Volume
    Optimization       Manual                                   
    0 %        Failed                 E:
    Eventlog:
    ID 4119
    Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
    ID 4106
    Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
    Error: 0x00000000, The operation completed successfully.
    Volume E: is 549 GB and have 186 GB free
    Memory is 2,6/8,0 GB at the moment
    Best regards,
    Manuel

  • Deduplication: There is insufficient disk space to perform the requested operation

    Hello,
    on my Win2012R2 Fileserver is a 550GB disk with userdrives.
    I startet Data Deplication but after 100 Optimized Files the job stopped and I cannot start it again.
    If I check the Event Log I find:
    Data Deplication could not initialize change log under \\?\Volume{ID}}.... The error code was 0x8056530a, There is unsufficient disk space to perform the requested operation. (Event ID 4119)
    Then I tried to unoptimize the files with Start-DedupJob -type Unoptimization -volume "E:" but I got another error:
    HRESULT 0x8056533a, This kon will not run at the scheduled time because it requires more memory than is currently available.
    On the 550GB disk I have about 140GB free diskspace.
    The server have 8GB RAM and use 2,3GB at the moment.
    CPU is at 0-2%
    SYSTEM have full access on the drive, there is no SWAP or boot file on it.
    Any more ideas?
    I already tried a reboot... ;)
    Thanks.
    bye Manuel

    Hi Sophia,
    KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
    PS C:\Windows\system32> Enable-DedupVolume "E:"
    Enabled            UsageType          SavedSpace           SavingsRate         
    Volume
    True               Default            26.95 MB             0 %                 
    E:
    PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
    Type               ScheduleType       StartTime              Progress   State                 
    Volume
    Optimization       Manual                                   
    0 %        Failed                 E:
    Eventlog:
    ID 4119
    Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
    ID 4106
    Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
    Error: 0x00000000, The operation completed successfully.
    Volume E: is 549 GB and have 186 GB free
    Memory is 2,6/8,0 GB at the moment
    Best regards,
    Manuel

  • Why does WLS 9.2 installer say "Insufficient disk space!" on OS X w/122GB?

    hi all,
    i just installed mac os x 10.4.0 about 4 days ago onto a brand new 160 GB internal hdd. apart from some upgrades (10.4.9, java 1.5, xcode docs, etc.) the only other apps i've installed are eclipse 3.2 development ide & mozilla. that left me with 122 GB available on my hdd (as reported by "Get Info").
    today, i tried to install BEA WebLogic Server 9.2 MP1 (the ibm aix generic installer). the installer for wls 9.2 comes as an executable jar file that must be executed from the shell. i executed the following command in the shell:
    $ java -jar server921_generic.jar -log=/Users/myhome/logs/wls92_mp1_install_02_05_07.logthe installer gui loads, prompts me for the license agreement, some install folder locations (i told it to install to "/Users/myhome/development/bea"), etc. then, it reports:
    <blockquote>
    "Insufficient disk space! The installer requires: 5MB for the BEA Home at /Users/myhome/development/bea and 270 MB temporary work space at /tmp/bea30536.tmp. There is only 271MB available at /."
    </blockquote>
    ONLY 271MB AVAILABLE!!? how can that be?
    so, i tried directing it to install to "/Applications/bea". i also started the installer with an option to use "/Applications/tmp" (which i created with mkdir) as an alternate tmp directory. this time with "sudo" - just in case:
    $ sudo java -Djava.io.tmpdir=/Applications/tmp  -jar server921_generic.jar -log=/Users/myhome/logs/wls92_mp1_install_02_05_07.logthis time its:
    <blockquote>
    "Insufficient disk space! The installer requires: 5MB for the BEA Home at /Applications/bea and 270 MB temporary work space at /Applications/tmp/bea30537.tmp. There is only 271MB available at /."
    </blockquote>
    what gives? on my solaris box, i can do "growfs" to expand the space available to a filesystem. is there some way i can do something similar on os x? or is there ANYTHING else to give "/" access to more of the 122 GB hdd space that is obviously available?
    thanks in advance for your help.

    hi,
    please take a look at "[url http://forums.bea.com/bea//thread.jspa?threadID=400003593&tstart=15&mod=1178464358368]HELP: Which command line args to launch Workshop 9.2 on Mac OS X 10.4?"
    to summarize that thread: the generic installer does not come with workshop 9.2 or portal 9.2 because they are not supported on aix, hp or mac os x. weblogic server is not supported on max os x at all.
    that thread also explains how i was able to get workshop 9.2 installed and running on os x:
    "...i happen to have a working installation of wls & wlw
    on my sun microsystem's sunblade 100 with solaris 9
    (installed using bea's solaris_sparc-specific .bin
    installer; which _does_ come bundled with the wlw ide).
    so, i copied the wlw-related stuff (everything in
    $bea_home/workshop92 & everything in
    $bea_home/common/eclipse) from my solaris box to the
    appropriate folders on my mac..."if you have (or can get access to) a working installation
    of workshop that has already been installed on another
    supported os, then you'll need to copy the
    workshop-related stuff from the supported os to your mac;
    like i described in the above thread. you'll need to keep
    in mind that there are some os-specific plugins that come
    with the supported versions of workshop; you will need to
    replace those with their mac-specific equivalents.
    if you click on my username in the top left-hand corner of
    this post, you will get a list of posts i've made recently
    that detail my experiences getting weblogic server 9.2 and
    workshop 9.2 installed on mac os x. if you can
    follow along with the info in those threads, you will
    learn everything that i know about the subject. good luck.
    let us know how you get on?

  • Why might WLS 9.2 installer say "Insufficient disk space!" on OS X w/122GB?

    hi all,
    i just installed tiger about a week ago onto a brand new 128 GB internal hdd. apart from some upgrades (10.4.9, java 1.5, xcode docs, etc.) the only other apps i've installed are eclipse 3.2 development ide & mozilla. that left me with 122 GB available on my hdd (as reported by "Get Info").
    today, i tried to install BEA WebLogic Server 9.2 (a j2ee application server). the installer for wls 9.2 comes as an executable jar file that must be executed from the shell. i executed the following command in the shell:
    $ java -jar server921_generic.jar -log=/myhome/logs/wls92mp1_install_02_0507.log
    the installer gui loads, prompts me for the license agreement, some install folder locations (i told it to install to "/Users/myhome/development/bea"), etc. then, it reports:
    "Insufficient disk space! The installer requires: 5MB for the BEA Home at /Users/myhome/development/bea and 270 MB temporary work space at /tmp/bea30536.tmp. There is only 271MB available at /."
    ONLY 271MB AVAILABLE!!? how can that be?
    so, i tried directing it to install to "/Applications/bea". i also started the installer with an option to use "/Applications/tmp" (which i created with mkdir) as an alternate tmp directory. this time with "sudo" - just in case:
    $ sudo java -Djava.io.tmpdir=/Applications/tmp -jar server921_generic.jar -log=/myhome/logs/wls92mp1_install_02_0507.log
    this time its:
    "Insufficient disk space! The installer requires: 5MB for the BEA Home at /Applications/bea and 270 MB temporary work space at /Applications/tmp/bea30537.tmp. There is only 271MB available at /."
    what gives? on my solaris box, i can do "growfs" to expand the space available to a filesystem. is there some way i can do something similar on os x? or is there ANYTHING else to give "/" access to more of the 122 GB hdd space that is obviously available?
    thanks in advance for your help.
    p.s. there are no disk quotas or anything like that:
    $ sudo quota
    Disk quotas for user root (uid 0): none
    $ quota
    Disk quotas for user me (uid 501): none
    i also ran repair permissions, just in case. same difference.
    Message was edited by: l'il john l'concharoo

    found my answer!: java -Dos.name=unix ...

  • Insufficient Disk Space: What do I do? I do not want to delete all of my projects. If I delete them and then empty the trash it will free up some space but I have deleted way more than I am tryig to import.

    I keep getting a message when I try to import pics. Insufficient disk space. What do I do? I do not want to delete all of my pics!

    Easiest thing to do would be to buy an external hard drive and move your Aperture library to that drive.

  • Can't import photos from camera -"Insufficient disk space on volume"?

    Please excuse my ignorance if there is a fix for this that I haven't found here.... I reinstalled iLife '11 yesterday because iPhoto would not recognize the camera. Now it recognizes the camera but it won't import the photos. I've tried all the suggestions, trashed the cache, the preference file, restarted, created a new library and I still can't import the photos from the camera to iPhoto because it says "insufficient disk space on volume." I have plenty of space on my hard drive. I can import through Image Capture but why go the extra step when importing to iPhoto was so very easy before? Can anyone help with this?

    This has been reported - not sure if there ever was a solution or not - search the forums to find the threads
    you can try renewing the iPhoto preference file to see if that helps -
    A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN 

  • Bridge CS6:  Output to Web or PDF - insufficient disk space..

    I have recently installed the CS6 cloud version of Bridge, but now get this error when trying to produce (or refresh) a contact sheet using Output to Web or PDF - There is insufficient disk space to complete this operation
    The error occurs no matter what the file size is, or if multiple of single files are selected - and as the sole application open. I'm running the application in OS X 10.8, with 8GB of RAM and 512MB of VRAM, so disk space doesn't seem to be the issue?
    I've just installed the lastest Bridge update, but this has made no difference. Thanks for your feedback in advance..

    I've found an old post which highlights a USERS folder conflict?
    Without any significant knowledge about working over a network I do know Bridge uses a Cache file on a user related base. So it might be possible it confuses the two folders if you have both company and private network based on the same user name.
    But as said, just a wild guess. If you need to work over a network try the blog from the Image Archivist, he also used to hang around here in the past:
    http://imagearchivist.blogspot.nl

  • CS6 Bridge Insufficient disk space error when on the domain

    We have a windows domain enviroment, and we run iMacs for the design team.  Using the newest Mac OS X we get the "Insufficient disk space to complete this opperation " error after loading images in Bridge and then try to change or saved them.  When we are not connected to the domain, we can modify and save them locally fine.  But once we log onto the Windows Domain (we have mapped drives using SMB links for storage) you can not use Bridge.  Is this a cashing issue with the mapped drives or is this something else.  I've only seen one other post on this and there was never a real fix. 
    They could use Brige fne on CS5 using the previous version of MacOS(in facct they still have to right now).  So i'm not sure if it is a Mac os issue or a windows/mac issue.  From what I understand the two macs (older laptop and newer laptop) are set up the same way with the mapped drives using the same Domain log in so the preferences are the same.
    The new mac is loaded with an i7, and 16gb ram, and plenty of drive space so I know its not that.
    Thanks for any help
    Tumi-ITGuy

    Anybody have any ideas?
    Not many here now about network set ups. Bridge is not designed for use over a network and also officially not supported by Adobe.
    Bridge also uses a user specific library for its cache data.
    This guy used to hang around here and has a successful set up for a network, try his blog:
    http://imagearchivist.blogspot.nl

Maybe you are looking for