Insufficient free space error

Hello.
I try to install EHP4 on ERP 6.0
I have x86_64 windows server with two partitions: drive c: and large drive mounted to c:\oracle\SID
Installation interrupts at PREP_GENCHECKS/SPACECHK_OPT with message
ERROR> Insufficient free space in the database as follows:
Create TABLESPACE PSAPSR3701 with 64637 MB
- it cannot find enough free space on drive c:
But tablespace should be created under c:\oracle\SID, and there is a lot of free space.
Can I skip this delirious check of c:\ ?

Hi,
Please ensure your brtools is at the latest
version as per note 12741.
If the problem still persists, you can set the trace level for brspace
to 11 as per note 29321 and re-run the phase.
Usually in sap upgrade this is related to Oracle dba_free_space not the
system free space, same theory should apply to EHP install. If you have
an Oracle dba you may ask him to check the data dictionary view
dba_free_space and available extents for each tablespace.
Also please review carefully points within Note 716377 - Problem
analysis in the upgrade: SPACECHK phases ?
Regards,
Aidan

Similar Messages

Error: There is insufficient free space on disk volume

Hello All,
I am trying to add Appset and getting this error:
Error message:There is insufficient free space on disk volume 'E:\' to create the database. The database requires XXXXX additional free bytes, while only yyyyy bytes are available.
My question is :
Why I get this message although I didn't check the data or any other option when trying to copy my production AppSet?
XXXX required is the size of my production AppSet DB.
Can anyone please help?
Best regards,
Mahmoud

Hi Santosh,
Thanks for your answer.
I am sorry I don't understand well what did you mean.
What I wanted to say is that DataBase creation failed so AppSet copy has failed and this is due to lack of disk space as mentioned in the error message.
If this would be clearer my question would be :
- What is the minimum free disk space needed to create an "empty" AppSet? Empty means no options checked in the copy Appset wizard.
FYI: I use BPC 7.0 SP8 SQLServer 2008
Thank you for your help.
Best Regards
Mahmoud

Insufficient free space in the database during upgrademodule General checks

we are upgrading SAP R/3 Enterprise 470 110 to ECC6 on Oracle/Windows.
During PREPARE module: General checks the file CHECKS.LOG show the following information:
   #====================================================#
Requests and information for module General checks #
   #====================================================#
INFO> The following values may be preliminary because of
      free space consumption during productive operation and
      additional free space requests derived in a later stage.
      Conversions of modified tables can require additional space.
      Please use the largest free space request printed,
      which are the values at the very end of this file.
ERROR> Insufficient free space in the database as follows:
Create TABLESPACE PSAPDIMD             with 102 MB
Create TABLESPACE PSAPDIMI             with 102 MB
Create TABLESPACE PSAPODSD             with 112 MB
Create TABLESPACE PSAPODSI             with 112 MB
Create TABLESPACE PSAPFACTD            with 102 MB
Create TABLESPACE PSAPFACTI            with 102 MB
INFO> To adjust the size of your tablespaces, you may use the commands
      in file 'C:\usr\sap\put\log\ORATBSXT.LST' using the 'brspace' utility.
      Please copy the file before making changes, as it may be
      overwritten in subsequent upgrade phases.
INFO> During the upgrade, the new SAP kernel
      will be installed. All files and subdirectories
      in directory C:\usr\sap\CTD\SYS\exe\run which are not used
      in Release 700 will be removed.
      The files from "dbclient.lst" in the kernel directory are kept.
      Files and subdirectories can be protected from deletion
      if they appear in a file "protect.lst" in the same directory
      (each protected name in a separate line).
      For security reasons, directory C:\usr\sap\CTD\SYS\exe\run
      should be saved in a backup.
INFO> You already installed kernel extensions.
      Please unpack the archive(s)
      RFC.CAR
      after the upgrade has finished.
      You can find these archives on the CD "Presentation".
      Do n o t unpack the archives now, the software
      is only compatible with the new SAP kernel.
INFO> It is possible to upgrade the frontend software before
      you start SAPup!
   #===========================================================#
PREPARE module General checks finished with status failed #
   #===========================================================#
#====================================================
Execution of all selected PREPARE modules finished.
#====================================================
Now, we have the new tablespace layout and as says the upgrade general note: Note 819655 - Add. info.: Upgrade to SAP NW 2004s ABAP ORACLE we do not have to create tablespaces as saied in PREPARE; so I have adjusted tables DDART,    TAORA, IAORA: with the entry
DDIM     STD     Dimension Tables in BW
DFACT     STD     Facts Table in BW
DODS     STD     ODS Tables in BW
Then J have repeated the module: GENERAL CHECK but in the file CHECKS.LOG I noted always the same error.
Any HELPS?????
Edited by: Raffaele Pezone on Dec 1, 2009 4:25 PM
Edited by: Raffaele Pezone on Dec 1, 2009 4:34 PM

As mentioned in sap note: Note 541542 - Upgrade phase INIT_CNTRANS: Container inconsistency
we don't have standard layout:
Standard layout: TABART: TAORA-TABSPACE, IAORA-TABSPACE
SSDEF: PSAPES<rel>D,   PSAPES<rel>I
SSEXC: PSAPES<rel>D,   PSAPES<rel>I
SLDEF: PSAPEL<rel>D,   PSAPEL<rel>I
SLEXC: PSAPEL<rel>D,   PSAPEL<rel>I
APPL0: PSAPSTABD,      PSAPSTABI
USER : PSAPUSER1D,     PSAPUSER1I
<...>: PSAP<.....>D,   PSAP<.....>I
but
MCOD Layout (new layout)
SSDEF: PSAP<sid><rel>, PSAP<sid><rel>
SSEXC: PSAP<sid><rel>, PSAP<sid><rel>
SLDEF: PSAP<sid><rel>, PSAP<sid><rel>
SLEXC: PSAP<sid><rel>, PSAP<sid><rel>
APPL0: PSAP<sid>USR,   PSAP<sid>USR
USER : PSAP<sid>USR,   PSAP<sid>USR
<...>: PSAP<sid>, PSAP<sid>
but we don't use Multiple component in one Database. We have only one instance in one DB.
in fact we have following tablespaces:
PSAPSID
PSAPSID620
PSAPSID700
PSAPSIDUSR
PSAPTEMP
PSAPUNDO
SYSAUX
SYSTEM
I have just created PSAPSID700 as PREPARE says.

Erroneous "insufficient disk space" error with WaveStudio 7

This has been bugging me for over 2 years. I get the "Insufficient disk space" error with Vista x32 and x64 and now with Windows 7 x64 when I've edited a wav file and then try to save it. I have plenty of disk space.
I've searched till I'm blue in the face but cannot find an answer and am tired of the lame work-around. I know how to copy and paste the entire edited wav into another file and then save it. It's annoying, but it works. What gets me is why is this not fixed?
Running CTWave.exe as administrator does not work. Running in Windows XP SP3 compatibility mode does not work.
I have been a faithful Creative Labs user for more years than I care to remember, but this one is shaking my faith. Is there anybody who can explain why this happens, or offer a fix?
Many thanks and keep on rockin',
Dave

You may wish to try these steps in order to solve your issue:
1. Make sure your computer has the latest Java runtime. To do this, just google search "Download Java", go to the first URL and download that free software. This step should solve most of the "insufficient disk space" problems.
2. If step 1 failed to work, you can open "My computer", right click on the hard disk you were trying to write your files into. From the "File System" tab, check to see it's "NTFS" but not "FAT32".
3. If the above two steps do not work, try creating a new partition from your primary hard disk. To do this, click "Start" -> then right click "My Computer" -> "Manage" -> "Disk Management" -> Make sure you shrink a new volume for at least 50 GB to 100 GB free disk space, again please have the NTFS file system. Once you successfully created this new partition, do a format then try writing your music files onto this Disk.
4. I think the above 3 steps are able to solve your issue. However, there's a bug I found sometime back when Win 7 first released. You can try creating a "temp" folder in your primary system drive, writing any files in there should have no problem as long as disk space is sufficient.
5. I certainly do not hope that error was caused by your anti-virus programme, but if all failed, you may want to consider temporarily disable your anti-virus software, and if everything works fine, you might want to switch to a new anti-virus programme.
Cheers.
Originally Posted by bghcomposer
Dave, I also have this problem. I recently bought new components for a new computer and put it together myself. I took Audigy 2zs Platinum Pro out of my old computer (if it ain't broke, don't fix it!) and put it in the new one. After getting the drivers and programs downloaded and installed, I too, have an "insufficient disk space" error. It also won't record - where it would work wonderfully on my other computer!
As a music teacher, I record piano parts for the students to sing to, but I can no longer do that! This would be a great fix! Hope someone responds with an answer!
Brian

Insufficient Disk Space error during installation of OEPE

I tried to install OEPE under Oracle Linux 5. During the installation, I got the "Insufficient disk space error" saying there is only 0MB available at my home directory. I checked my disk space and found that was not the case. I have no clue why I got this error and how to solve the issue. Any help would be appreciated.
[lixuxu@slc01pne ~/download]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/xvda1 144G 19G 118G 14% /
tmpfs 5.8G 0 5.8G 0% /dev/shm
slcnas411:/export/home1/lixuxu
6.0T 3.5T 2.6T 59% /home/lixuxu
slcavere01.us.oracle.com:/vol/ade_infra/prod/LINUX
96G 5.9G 91G 7% /usr/dev_infra/platform
slcavere01.us.oracle.com:/vol/ade_infra/prod/GENERIC
96G 5.9G 91G 7% /usr/dev_infra/generic
slc1001nap:/vol/local/x86/redhat/50_prod/packages
1.1T 1023G 58G 95% /usr/local/remote/packages
slc1001nap:/vol/local/linux/redhat/packages
1.1T 1023G 58G 95% /usr/local/redhat/packages

Hi,
Are you using the the all-in-one installer or the one which includes WLS as well. Do you face similar issues when installing Eclipse JEE package ?
thanks
Raj

Insufficient Disk-space Error Installing WebLogic 1033_generic on Mac

How do I resolve this "Insufficient Disk-space Error" message I get while installing WLS1033? I thought I have more than enough disk-space on my system to handle just about any application software size out there. i mean, beside the 937.72 gigs of available disk-space on my system, I also have roughly 240 gigs external drive space. The system runs on 8 gigs of RAM. I know I am doing something wrong; just can't figure out what. I am new at WebLogic and so any help from the community is highly appreciated. Someone please help.
sbliss

Al
I got this error: "Unable to access jarfile wls1033_generic.jar" when I enter "java -Dos.name=unix -jar wls1033_generic.jar" in the Terminal command line. I very am frustrated. Please help me. Please advise.
One question: Is anybody able to install webLogic? I am just curious.
sbliss

"Not enough free space" error. Prevents sync.

My 4th generation iPod Touch has recently started throwing a "not enough free space" error message every time I try to sync. I haven't added and large files recently, and since getting this error, I have deleted many large files from my Ipod. I still get the message.
The exact error message is:
"The iPod [my ipod name] cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 19GB required.)."
My iPod is showing 17.4GB of free space. I'm syncing why wire. Intersetingly, I sync my library to an 120GB regular (non-Touch) iPod without issue.
Any suggestions? I'm about at the end of my rope.
Thanks.
roorider

Here's what worked for me, finally.
In iTunes, I unchecked Apps, Music, Movies, TV Shows, Podcasts, etc. so that they wouldn't snyc. Then I syned my iPod. The synce worked fine. Then, I rechked all of the items I previously unchecked and synced again. No error message this time.
It appears that all of the settings in my apps were reset to default after the sync, and perhaps even game data (I rarely play games, so I don't what, if anything it would save), And my home screens were totally unoriganized, so I had to rearrange all of those back to my personal taste, but all is back to normal now.
roorider

Deploy Image failed with "Unzip Failed:Insufficient Disk Space" error

I have installed the Application Management Pack para EBusiness Suite Release 2.02. When I tryed to do a Deploy Image procedure, we get the error:"Insufficient Disk Space"; but, we have 586 GB of space free in the filesystem.
I checked the /tmp directory and this was mounted on a file system that have free space. (256 GB free)
Regards,

Do you sufficient disk space? If yes, log a SR and ask Oracle Support to provide you with the solution from that bug (as the solution is not available for public access).
Did you install all pre-req. software before starting the installation?
Note: 402311.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Microsoft Windows
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402311.1

IPhoto 11' insufficient disk space error on EHD

I have read previous discussions on this error, which did not fix my own problems. I have recently moved my iPhoto library to an EHD. The move went smoothly and I began importing more photos into the library. During one of the large imports I accidentaly unplugged my EHD which halted the import. I noticed it created an album in iPhoto saying "recovered photos". There were about 3,000 of them, and in the folder the photos thumbnails were not appearing. So I moved that folder to the iPhoto trash and emptied the trash. I also tried emtying the Finder trash as well.
At this point I started recieving the error "Insufficient Disk Space iPhoto cannot import your photos because there is not enough free space on the volume containing your iPhoto library."
My EHD has 1.76TB free of 2TB, and my MacBook Pro has 407.29GB free of 499.25GB. So this is not a space issue at all.
I noticed that there was discussion of problems with deleting large amounts of data at one time, I believe this is what I did. What can I do to resolve my issue?
Thank you,
Mimmers49

As a test launch iPhoto with the Option key held down and create a new, test library. Try to import a new batch photos and test to see if the same problem persists. Does it?
If it doesn't then give this a go on your existing library:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.

"Insufficient Disk Space Error" Doesn't make sense

I'm sure there is a very easy solution here and I am missing something simple. I am trying to import my iPhoto Library into Aperture. In order to do this I copied my iPhoto Library onto my external, freeing up space for the Aperture Library.
Prior to importing, my
MacBook has 173.55GB of free space
iPhoto Library is 111.66 GB
At some point while importing I end up getting this message:
INSUFFICIENT DISK SPACE
There is not enough free space on your Aperture Library Volume to import the selected items. It is estimated that you need at least an additional 118431 MB of space.
This is usually after around 100GB has been imported and there should be about 10GB left to import and 60GB still showing free on my MacBook HD. The amount that gets imported prior to the error is always a little different.
Can anyone help me? I really want to start using Aperture but I can't if I can not import my photos.
Thanks.

zblom wrote:
So if my Library is 111GB there is no way I can clear enough space on a MacBook with a 250GB Hard Drive?
Awesome, I think that should be in the system requirements somewhere.
You're right it should be. Perhaps it's not an across the board requirement. I think there's KB article on the topic, but I can't find it.
Having a library that takes half you start up disk probably isn't a good idea though. You should consider putting your library- or referenced images- on a fast external drive. I assume you're going to continue adding pictures so it's only a matter of time before you reach critical mass anyway.
DLS

CS6 Bridge Insufficient disk space error when on the domain

We have a windows domain enviroment, and we run iMacs for the design team. Using the newest Mac OS X we get the "Insufficient disk space to complete this opperation " error after loading images in Bridge and then try to change or saved them. When we are not connected to the domain, we can modify and save them locally fine. But once we log onto the Windows Domain (we have mapped drives using SMB links for storage) you can not use Bridge. Is this a cashing issue with the mapped drives or is this something else. I've only seen one other post on this and there was never a real fix.
They could use Brige fne on CS5 using the previous version of MacOS(in facct they still have to right now). So i'm not sure if it is a Mac os issue or a windows/mac issue. From what I understand the two macs (older laptop and newer laptop) are set up the same way with the mapped drives using the same Domain log in so the preferences are the same.
The new mac is loaded with an i7, and 16gb ram, and plenty of drive space so I know its not that.
Thanks for any help
Tumi-ITGuy

Anybody have any ideas?
Not many here now about network set ups. Bridge is not designed for use over a network and also officially not supported by Adobe.
Bridge also uses a user specific library for its cache data.
This guy used to hang around here and has a successful set up for a network, try his blog:
http://imagearchivist.blogspot.nl

Insufficient disk space error

I'm a new iPhoto user and get an error message about insufficent disk space when I try to drag photos in from an inserted CD of .jpgs. New iMac... shouldn't get this message. Tried the different library approach outlined in some of your threads with the same result

How much free space do you have on your hard drive?
Where are you dragging the photos?
LN

Insufficient disk space error during export

I've been exporting approximately 1,200 photograghs (975 MB) to a Desktop folder which I copy and then burn to a DVD for playback on a Windows PC without difficulty for the past several months. However, I'm now receiving an error message stating "insufficient disk space for that operation". What's happening? I receive the error even when attempting to export 50 photograghs (25 - 30 MB).
iMac G3, 600 MHz, 768 MB SDRAM, slot loaded Mac OS X (10.3.9) Netgear WGR614 v6 wirelrss router, Dell Dimension 510 PC, HP 6980, cable modem, Epson 3490 scanner
iMac G3, 600 MHz, 768 MB SDRAM, slot loaded Mac OS X (10.3.9) Netgear WGR614 v6 wirelrss router, Dell Dimension 510 PC, HP 6980, cable modem

I have edited most of the JPEG files with PE4. Could this be causing the trouble?
Possibly. Check your Edit->Color Setting menu window and see if you've got color management turn one. Mine looks like this. If it's not set to manage then some of those files may not have a profile. To correct this you can either reedit each and save to embed the profile or, much easier, download the Automator application "Embed sRGB Profile" from Toad's Cellar, unzip and drag the original files that need it onto it. It will automatically embed the profile.
Were the files you tried to export the same as before or a new bunch? Had then been editied?

Insufficient disk space error on iPhoto 9.5.1 using iOS 10.9.4.

I am trying to import around 12,000 photos from an old computer and have so far imported 4,000. There are over 300 gigabytes free on the computer, and when I go to transfer more photos over I get the "Insufficient Disk Space" message and the photos do not transfer. All of the solutions I have found online are outdated, so I was wondering how to solve this problem now?
Thanks!

As a test launch iPhoto with the Option key held down and create a new, test library. Try to import a new batch photos and test to see if the same problem persists. Does it?
If it doesn't then give this a go on your existing library:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.

False "not enough free space" error

Hi
When trying to copy a large file over, an Aperture Library, I get an error saying I have not enough free space.
I have 90GB free, and the library I am attempting to copy over from an external hard drive is only 50GB.
I have run Disc Utility from the recovery mode, and it did find a file (that I had deleted the same day) that was falsely listed as taking up 70GB when it was just 3GB.
I of course had Disc Utility fix the disk, and when running it a second time it did not spot any errors.
I have also used Terminal to search for both the deleted file and the old Aperture Library (that I had deleted) and it does not appear to be anywhere, even as invisible.
What can I do to find out what is taking up the free/not so free space and how can I get it back ?
I am running 10.9.4 on a MacBook Pro with a SSD.

UPDATE:
I tried to copy the file over in segments rather than as a lump, and that seemed to have worked.
Rather than copying the entire "Aperture Library" package, I opened it, moved "Masters" out of it, copied the remains over, then afterwards copied the contents of the "Masters" folder into the respective positions on the MacBook Pro.
So aparently there is a bug which prevents Maverics 10.9.4 from copying a file bigger than 50GB.
As say this as I could copy the file ONTO an external harddrive from a computer running 10.9.3
So there you have it Apple now, you know you know where to look.
Thanks for listening

Insufficient free space error

Similar Messages

Maybe you are looking for