Insufficient privileges: is there an answer?

Has Apple responded to the "insufficient privileges" problem?
My itunes was acting up in several ways, such that the only thing I could do was listen to the music I had ripped in. No itunes store, no device-synching, no radio. So I uninstalled it. As a result, I can't even listen to my music any more, because I can't reinstall.
Every time I try, I'm told I have insufficient privileges to modify c\program files\common files\apple\mobile device support/applemobiledevicehelper.exe.
On googling, I find the "insufficient privileges" problem widely-discussed, but unfortunately every self-proclaimed expert who steps up with an answer says something different. I have tried every one I see, including
- I uninstalled all apple products and rebooted and tried again
- disabled my security programs and tried again
- disabled UAC and tried again
- made sure my Windows updates are current and tried again
- taking over full control of the apple mobile devices folder, and/or of the entire program files folder, but it said I didn't have privileges to take full control of apple mobile devices folder or of the common files folder or of that specific file.
- I couldn't copy, rename, or delete the folder
and none have worked.
My question is simple: has Apple provided any kind of answer to this common, recurrent problem? Maybe I just don't know how to navigate Apple support, but I can't find it. Obviously trying things from helpful people on the internet isn'tn working realy great.

If you backed up when they were there, you can restore with a backup. You might also want to ask on a Yahoo forum if there's another way.
I would think it would be OK to use the Notes app. I don't sync it with anything and I've never had any trouble. You might also look at 3rd party apps... I've heard that Evernote is very good.

Similar Messages

ORA-01031: insufficient privileges in PL/SQL but not in SQL

I have problem with following situation.
I switched current schema to another one "ban", and selected 4 rows from "ed"
alter session set current_schema=ban;
SELECT * FROM ed.PS WHERE ROWNUM < 5;
the output is OK, and I get 4 rows like
ID_S ID_Z
1000152 1
1000153 1
1000154 1
1000155 1
but following procedure is compiled with warning
create or replace
procedure proc1
as
rowcnt int;
begin
select count(*) into rowcnt from ed.PS where rownum < 5;
end;
"Create procedure, executed in 0.031 sec."
5,29,PL/SQL: ORA-01031: insufficient privileges
5,2,PL/SQL: SQL Statement ignored
,,Total execution time 0.047 sec.
Could you help me why SELECT does work in SQL but not in PL/SQL procedure?
Thanks.
Message was edited by:
MattSk

Privs granted via a role are only valid from SQL - and not from/within stored PL/SQL code.
Quoting Tom's (from http://asktom.oracle.com) response to this:I did address this role thing in my book Expert one on one Oracle:
<quote>
What happens when we compile a Definer rights procedure
When we compile the procedure into the database, a couple of things happen with regards to
privileges. We will list them here briefly and then go into more detail:
q    All of the objects the procedure statically accesses (anything not accessed via dynamic SQL)
are verified for existence. Names are resolved via the standard scoping rules as they apply to the
definer of the procedure.
q    All of the objects it accesses are verified to ensure that the required access mode will be
available. That is, if an attempt to UPDATE T is made - Oracle will verify the definer or PUBLIC
has the ability to UPDATE T without use of any ROLES.
q    A dependency between this procedure and the referenced objects is setup and maintained. If
this procedure SELECTS FROM T, then a dependency between T and this procedure is recorded
If, for example, I have a procedure P that attempted to 'SELECT * FROM T', the compiler will first
resolve T into a fully qualified referenced. T is an ambiguous name in the database - there may be
many T's to choose from. Oracle will follow its scoping rules to figure out what T really is, any
synonyms will be resolved to their base objects and the schema name will be associated with the
object as well. It does this name resolution using the rules for the currently logged in user (the
definer). That is, it will look for an object owned by this user called T and use that first (this
includes private synonyms), then it will look at public synonyms and try to find T and so on.
Once it determines exactly what T refers to - Oracle will determine if the mode in which we are
attempting to access T is permitted.   In this case, if we as the definer of the procedure either
owns the object T or has been granted SELECT on T directly or PUBLIC was granted SELECT, the
procedure will compile. If we do not have access to an object called T by a direct grant - the
procedure P will fail compilation. So, when the object (the stored procedure that references T) is
compiled into the database, Oracle will do these checks - and if they "pass", Oracle will compile
the procedure, store the binary code for the procedure and set up a dependency between this
procedure and this object T. This dependency is used to invalidate the procedure later - in the
event something happens to T that necessitates the stored procedures recompilation. For example,
if at a later date - we REVOKE SELECT ON T from the owner of this stored procedure - Oracle will
mark all stored procedures this user has that are dependent on T, that refer to T, as INVALID. If
we ALTER T ADD some column, Oracle can invalidate all of the dependent procedures. This will cause
them to be recompiled automatically upon their next execution.
What is interesting to note is not only what is stored but what is not stored when we compile the
object. Oracle does not store the exact privilege that was used to get access to T. We only know
that procedure P is dependent on T. We do not know if the reason we were allowed to see T was due
to:
q    A grant given to the definer of the procedure (grant select on T to user)
q    A grant to public on T (grant select on T to public)
q    The user having the SELECT ANY TABLE privilege
The reason it is interesting to note what is not stored is that a REVOKE of any of the above will
cause the procedure P to become invalid. If all three privileges were in place when the procedure
was compiled, a revoke of ANY of them will invalidate the procedure - forcing it to be recompiled
before it is executed again. Since all three privileges were in place when we created the procedure
- it will compile successfully (until we revoke all three that is). This recompilation will happen
automatically the next time that the procedure is executed.
Now that the procedure is compiled into the database and the dependencies are all setup, we can
execute the procedure and be assured that it knows what T is and that T is accessible. If something
happens to either the table T or to the set of base privileges available to the definer of this
procedure that might affect our ability to access T -- our procedure will become invalid and will
need to be recompiled.
This leads into why ROLES are not enabled during the compilation and execution of a stored
procedure in Definer rights mode. Oracle is not storing exactly WHY you are allowed to access T -
only that you are. Any change to your privileges that might cause access to T to go away will cause
the procedure to become invalid and necessitate its recompilation. Without roles - that means only
'REVOKE SELECT ANY TABLE' or 'REVOKE SELECT ON T' from the Definer account or from PUBLIC. With
roles - it greatly expands the number of times we would invalidate this procedure. If some role
that was granted to some role that was granted to this user was modified, this procedure might go
invalid, even if we did not rely on that privilege from that role. ROLES are designed to be very
fluid when compared to GRANTS given to users as far as privilege sets go. For a minute, let's say
that roles did give us privileges in stored objects. Now, most any time anything was revoked from
ANY ROLE we had, or any role any role we have has (and so on -- roles can and are granted to roles)
-- many of our objects would become invalid. Think about that, REVOKE some privilege from a ROLE
and suddenly your entire database must be recompiled! Consider the impact of revoking some system
privilege from a ROLE, it would be like doing that to PUBLIC is now, don't do it, just think about
it (if you do revoke some powerful system privilege from PUBLIC, do it on a test database). If
PUBLIC had been granted SELECT ANY TABLE, revoking that privilege would cause virtually every
procedure in the database to go invalid. If procedures relied on roles, virtually every procedure
in the database would constantly become invalid due to small changes in permissions. Since one of
the major benefits of procedures is the 'compile once, run many' model - this would be disastrous
for performance.
Also consider that roles may be
q    Non-default: If I have a non-default role and I enable it and I compile a procedure that
relies on those privileges, when I log out I no longer have that role -- should my procedure become
invalid -- why? Why not? I could easily argue both sides.
q    Password Protected: if someone changes the password on a ROLE, should everything that might
need that role be recompiled? I might be granted that role but not knowing the new password - I
can no longer enable it. Should the privileges still be available? Why or Why not? Again, arguing
either side of this is easy. There are cases for and against each.
The bottom line with respect to roles in procedures with Definer rights are:
q    You have thousands or tens of thousands of end users. They don't create stored objects (they
should not). We need roles to manage these people. Roles are designed for these people (end users).
q    You have far fewer application schema's (things that hold stored objects). For these we want
to be explicit as to exactly what privileges we need and why. In security terms this is called the
concept of 'least privileges', you want to specifically say what privilege you need and why you
need it. If you inherit lots of privileges from roles you cannot do that effectively. We can manage
to be explicit since the number of development schemas is SMALL (but the number of end users is
large)...
q    Having the direct relationship between the definer and the procedure makes for a much more
efficient database. We recompile objects only when we need to, not when we might need to. It is a
large efficiency enhancement.
</quote>

Unable to schedule a workbook - Insufficient Privileges

I'm trying to set up a user so that they can schedule workbooks.
After the user goes through the workbook wizard, a Database Error - ORA-01031: insufficient privilege is displayed.
The following privileges have been granted to the user:
CREATE PROCEDURE
CREATE TABLE
CREATE VIEW
EXECUTE ANY PROCEDURE
UNLIMITED TABLESPACE
EXECUTE ON SYS.DBMS_JOB
SELECT ON SYS.V_$PARAMETER
The scheduled reports are supposed to be created in the user's schema.
The version of Discoverer that I am using is 10g (10.1.2.3)
I've verified that the DBMS_JOB package is already installed on the database.

Hi
These is the script I normally use:
accept username prompt'Enter Username: '
accept pword prompt'Enter Password: '
create user &username identified by &password;
grant connect, resource to &&username;
grant analyze any to &&username;
grant create procedure, create sequence to &&username;
grant create session, create table, create view to &&username;
grant execute any procedure to &&username;
grant global query rewrite to &&username;
grant select any table, unlimited tablespace to &&username;
grant execute on sys.dbms_job to &&username;
grant select on sys.v_$parameter to &&username;
There are several grants in my list that aren't in yours.
For a start, the user needs CREATE ANY PROCEDURE not CREATE PROCEDURE as the procedure they will be creating will exist in the EUL owner's schema, not their own.
Try this one first and see what happens. If you still don't get success do the other grants from my script. I'm sure scheduling will then work.
Best wishes
Michael

Error while Creating Master Repository: ORA-01031: insufficient Privileges

Hi,
I'm trying to install ODI into my VM.
I have done the installation and while creating Master Repository, I'm getting following error:
ORA-01031: insufficient Privileges
I'm using Oracle & have created user as ODI_MASTER with Admin Privileges.
I'll be using it to load metadata onto planning (Version 11.1.2)
Is there anything that I'm missing out on.
Jitendra.

Seems missing grants on the user you are using to create Master Repository.
you are using Oracle .. grant connect, resource to <your_user>. These two rolesa have sufficient access to db to create the master repository.
execuute the sql from sys user
Regards,
Amit
Edited by: amitgupta1202 on 20 Aug, 2009 10:42 PM

ORA-01031 SYSMAN Insufficient Privileges Creating a new user

I have installed Oracle 11g R2 onto Windows 7 64bit
I then created a new database, at the end it moaned about the service and listener was not running or allocated to each other and also there was no web admin tool available.
To resolve this I managed to use Net Configuration Assistant to get the listener sorted.
I then had to run:
set ORACLE_HOSTNAME=localhost
set ORACLE_SID=mydb
set ORACLE_UNQNAME=mydb
I then ran
emca -config dbcontrol db -repos recreate
This gave me the web admin tool to create a new user.
I logged in as SYSMAN tried to create a new user and got the "ORA-01031 Insufficient Privileges, you do not have enough privileges to perform this operation." error
Can someone please help.
Thanks

It isn't that simple. As SYSMAN used for 11.2.0.3 database control:
orcl> select privilege from user_sys_privs;
PRIVILEGE
CREATE PUBLIC SYNONYM
SELECT ANY DICTIONARY
UNLIMITED TABLESPACE
ALTER SESSION
orcl>but as SYSMAN used for 12.1 Cloud Control:SQL> select privilege from user_sys_privs;
PRIVILEGE
ALTER USER
DROP USER
CREATE SESSION
CREATE PUBLIC SYNONYM
CREATE JOB
CREATE MATERIALIZED VIEW
SELECT ANY DICTIONARY
CREATE TABLE
ALTER SESSION
CREATE USER
CREATE SYNONYM
DROP PUBLIC SYNONYM
MANAGE SCHEDULER
CREATE VIEW
CREATE DATABASE LINK
15 rows selected.
SQL>so you have to be a bit careful when you give a yes/no answer.
Edited by: JohnWatson on Nov 12, 2012 11:38 AM
Forgot to include a quote: this is replying to the question about whether SYSMAN can create users.

10.6 School Network - iMovie 11 Crashes when Importing - insufficient privileges

A network recently upgraded from 10.5 to 10.6 and iLife from 9 to 11
Exporting Movies from I Can Animate to the network Home Folder and then importing into iMovie for editing, iMovie decided that the file didn't exist the first time then subsequently crashed on the second attempt.
Trialed a test exporting from iMovie and importing back into iMovie. This worked
First port of call, update the software.
Tried importing again. New message, insufficient privileges.
Solution:
Go to the shared drive where the Home Folders are located on the server. Use the righ click get info option rather than using WGM or Server Admin. Add the Student user group to the Sharing and Permissions area and apply to all enclosed folder.
This appears to fix the problem. I can only assume that the upgrade of either OS X or iLife had reset the privileges. I'll be keeping an eye on it and I'll be adding to this thread if the issue arises again.

An alternative solution....for now. If you copy the files to your desktop or in any other folder you want them (it's temporary), you can still import them in iMovie. Just click Archive, Import, Movies and search for the folder you put your files in. I did it several times with success, that means no error! Now I can use my files and edit them in iMovie. You can delete the files on the desktop, since iMovie has copied the files into the iMovie library.
Another possibility is drag and drop the files from your desktop directly into an event. iMovie will copy the files into the library. For both options I am not sure if analysation for stability en recognising persons had been done while importing, but I guess you can do that later on.
Do not make the mistake of importing them in Aperture or iPhoto, drag and drop it an iMovie-event and delete it in Aperture/iPhoto... You will only hear the audiostream, you will see miniatures in iMovie, though your videostream is gone. That's how I lost the first video of my second daughter .
Until there's a good solution or update from Apple it works for me. I hope it does for you too!

ITunes 7.4.2 Run Error with Vista (insufficient privileges)

Short and sweet. Windows Vista. McAfee Security. User Profile is coded as Adminsistrator and previous iTunes version was working fine.
Loaded 7.4.2 and install registered complete. First time to open the store..rec'd error: "The Installer has insufficient privileges to modify this file: C;\Program Files\iTunes\About iTunes.rtf." Now..when I click on the actual file, I get "You don't have permission to open file". Yes..I went into the security tab to open the file to all users, and when I clicked the icon again, it showed another file, and another...so on. I certainly do not want to manually edit every single file and when I try to uninstall, I don't have permission to erase the files. Anybody with an idea what I am going through and have a fix?

Hello, first of all thank you veyr much polydorus the driver resolved the itunes error
But I still having problems with most of my movie files I keep getting the error: Error -2202: a bad public atom was found in the movie
And strangest is on my brothers ipod the files work, and they did work before on my old ipod (30gb) to now I bought a new one (160gb) and I cant copy any files to it, also if I convert my offical files again I keep getting this error.
is there anyone that knows what is wrong maybe?

Can't Install iTunes : Error Message "Installer has insufficient Privileges to modify this File" Running Windows Vista

Hello!
I am currently having issues installing iTunes on BOTH of my computers. One running Vista, the other, Windows 7.
(Not the same issues)
I used to have iTunes on my Vista (32bit), but when asked to update the software (The update prior to the newest one), I was not able to.
I dont exactly remember the error message.
Yesterday, I tried to install it again when I realized there was a new update.
I am receiving an error message while trying to install the software that says :
"The Installer has insufficient privileges to modify this file: c:\program files\ common files \ apple \ apple application support \ webkit. resources \ inspector \ images \ warnings errors.png
I have tried almost everything I knew to do.
Downloaded itunes setup, extracted the files and tried to install them all separately.
Then I had issues UNinstalling Apple Support and Mobile devices!
Tried something with the registry (not too sure what. I read it on this website)
Tried to Force Uninstall EVERY bit of apple on the computer then try again, and to no avail.
I am a bit discouraged, because I have been trying for so long with both computers.
I even called applecare for help with Windows 7 computer. Spoke to one representative who forwarded me to another who could not help.
(Windows 7 itunes WILL install, but when I plug up my phone says I am not running 64bit itunes, which I am, and to reinstall. Then I was missing the Mobile device and would not let me separately install.)
I am a bit frustrated, and I'd appreciate all of the help I can get.
Thank You all in advance.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

For such situation, I'd suggest the following:
1. Remove current installed office with the fix-it tool in
KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
2. Either download a trial version of Office 2013 from
http://office.microsoft.com/, or from
http://technet.microsoft.com/en-us/evalcenter/jj937170
3. Reboot your computer in clean boot mode, and run setup again
Max Meng
TechNet Community Support

8.1.6 install fails with Error 1321 Installer has insufficient privileges -

Adobe Reader “Check for Updates” identifies “Adobe Reader 8.1.6 (CPSID_49167)” as “Available”.
Installation fails with “Error 1321.The Installer has insufficient privileges to modify the file C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Search.api.”
Reboot tries to complete install adding unwanted desktop icon, but CPSID_49167 still shows as “Available” and MSI29706>LOG(s) show above error.
XP SP3 Home, IE7, Adobe Reader 8.1.5

Thanx kashifMohd,
Downloaded the fix, vetted it, and before creating a new Administrator account used the following recipe with success:
1. Ran downloaded fix with usual Admin Account and got the “Error 1321 for Search.api.” as before, but now there is a pop-up asking "Retry" or "Cancel" that did not appear when using "Get Updates" function from running Adobe Reader. Replied "Cancel".
2. Rebooted, and disabled Kaspersky Anti-Virus.
3. Again ran downloaded fix with usual Admin Account and got Error 1321 for different file: "C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins3d\3difr.x3d" with pop-up asking "Retry" or "Cancel".
4. Clicked "Retry" this time and installation completed successfully.
Thanx again.

ORA-01031:Insufficient Privileges error when I am trying to use ALERT_QUE

Hi,
I am working on SYS.ALERT.QUE for getting system alerts. I am using ODP in C# for connecting to Oracle database with username = SYSTEM, but when I am trying to enque or deque any message from SYS.ALERT.QUE, its gives an error ORA-01031:Insufficient Privileges. I am not able to understand how to assign SYSDBA privileges to SYSTEM and access ALERT_QUE for getting system alerts. I am posting my code below, plz have a look and let me know whats wrong with the code. I am able to connect to databse using SYSTEM, do I need to use username = SYS for accesing ALERT_QUE of database? Plz let me know whats the solution.
OracleConnection con = new OracleConnection(constr);
// Create queue
OracleAQQueue queue = new OracleAQQueue("sys.alert_que", con);
// Open connection
con.Open();
// Begin txn for enqueue
OracleTransaction txn = con.BeginTransaction();
// Set message type for the queue
queue.MessageType = OracleAQMessageType.Raw;
// Prepare message and RAW payload
OracleAQMessage enqMsg = new OracleAQMessage();
byte[] bytePayload = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
enqMsg.Payload = bytePayload;
OracleAQAgent[] agent = new OracleAQAgent[1];
agent[0] = new OracleAQAgent("SUBSCRIBER1");
enqMsg.Recipients = agent;
enqMsg.SenderId = new OracleAQAgent("SENDER1");
// Prepare to Enqueue
queue.EnqueueOptions.Visibility = OracleAQVisibilityMode.OnCommit;
// Enqueue message
queue.Enqueue(enqMsg);
The code throws exception at line "queue.Enqueue(enqMsg);" saying ORA-01031:Insufficient Privileges
Edited by: 916462 on Feb 27, 2012 3:31 AM

Hi Sudheendra,
Thanks a lot, that worked. Now I am facing one more new issue, when I am trying to deque message from ALERT_QUE which is oracle maintained queue for alerts, I am getting an error "ORA-25215:User data type and queue type do not match". Is there something wrong with my code like Message type, payload and all. I am very new to Oracle database so I don't have idea about this details. Can u plz help me in solving this.
OracleTransaction txn = con.BeginTransaction();
// Set message type for the queue
queue.MessageType = OracleAQMessageType.Raw;
// Prepare message and RAW payload
OracleAQMessage enqMsg = new OracleAQMessage();
byte[] bytePayload = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 };
enqMsg.Payload = bytePayload;
OracleAQAgent[] agent = new OracleAQAgent[1];
agent[0] = new OracleAQAgent("SUBSCRIBER1");
enqMsg.Recipients = agent;
enqMsg.SenderId = new OracleAQAgent("SENDER1");
// Begin txn for Dequeue
txn = con.BeginTransaction();
// Prepare to Dequeue
queue.DequeueOptions.Visibility = OracleAQVisibilityMode.OnCommit;
queue.DequeueOptions.Wait = 10;
queue.DequeueOptions.ConsumerName = "SUBSCRIBER1";
// Dequeue message
OracleAQMessage deqMsg = queue.Dequeue();
txn.Commit();
Edited by: 916462 on Feb 28, 2012 9:55 PM

Not able to Start the oracle db error "ORA-01031: insufficient privileges"

Hi experts,
I have oracle 11g setup on so solaris. i changed the db_cache_size
& processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
when i start the db server its giving the below error(startup.log)
./dbstart: Starting up database "orcl"
Mon Sep 27 04:31:08 MDT 2010
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
./dbstart: Database instance "orcl" warm started.
Please help me to ressolve this issue.
Thanks
Krishna

yes, password file is there in /etc/passwd
here are the contents:
root:x:0:0:Super-User:/:/sbin/sh
lroot:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:/bin/false
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:/bin/false
lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
nobody:x:60001:60001:Nobody:/:/bin/false
noaccess:x:60002:60002:No Access User:/:/bin/false
nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
ldap:x:50001:1002::/export/home/ldap:/bin/sh
perfuser:x:884:268::/export/home/perfuser:/bin/csh
webservd:x:80:80::/home/webservd:/bin/pfsh
oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
idc_perf:x:64384:292::/home/idc_perf:/bin/sh

"insufficient privileges to access this directory C:/Program Files(x86)/iTunes/iTunes.Resources/nb.Iproj."

I'm using a Windows 8 laptop and I updated my iphone 4s software to IOS7 and of course my itunes needs updating, but when I go to update it is in vain because it comes up with the message that the installer has insufficient privileges to access this directory C:/Program Files(x86)/iTunes/iTunes.Resources/nb.Iproj.
and the installation cannot continue. I have tried changing the security permissions on this file which doesn't let me as it asks that I need Read Permissions etc...
Has anyone encountered this issue, I've looked online but nothing helps for my situation

If you can't delete the .lproj folders try renaming them or deleting/renaming a parent folder, i.e. \iTunes\iTunes.Resources or \iTunes.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Import data from local file: insufficient privilege

As part of a project I'm working on, I have to load data (only a few thousand records) into a HANA Development instance on HCP. Last week I did this several times with no problem using File > Import from HANA Studio and choosing Data From Local File. Yesterday and today I get this message (most of the time, but not all the time): SAP DBTech JDBC: [258]: insufficient privilege: Not authorized.
Does anybody know why this might be and what do to about it?
Are there batch alternatives? I have not found any. The INPUT INTO statement also gives authorization problems.

Thanks for Your replies.
Jochen - I can't find schema.ini file and your link doesn't work - I mean that site is under construction
Mahesh - I tried to changed cells' format in excel, but file is saved without changes (as csv).
Pandey - I read about DTW but I can't find it anywhere. Is there a site where it could be downloaded from?
Finally I solved this problem. After saving file as xls I could changed cells' format and save with changes. It helped - data '1-10-103' is imported correctly.
Regards,
Hmg

ORA-01031: insufficient privileges when connecting by SQL PLUS 8.0 with sys

From client, I use SQL PLUS 8.0 to connect to server: sys/password@MYDB1 as sysdba
The error always raises “ORA-01031: insufficient privileges”
I have done:
- Set: remote_login_passwordfile=exclusive in tnsname.ora file
- Uncomment: SQLNET.AUTHENTICATION_SERVICES in “sqlnet.ora” file
Also on this client:
to use SQL PLUS 8.0 to connect to server: manager/password@MYDB1. To connect normally
to use PLSQL Deverloper (it is the same oracle_home with SQL PLUS 8.0) to connect to database normally with user sys.
To use Enterprise manager console (it is other oracle_home with SQL PLUS 8.0) to connect to database normally with user sys
Please, help me to solve this trouble

THIS IS CONTENT OF SQLNET.ora CLIENT
# copyright (c) 1996 by the Oracle Corporation
# NAME
# sqlnet.ora
# FUNCTION
# Oracle Network Client startup parameter file example
# NOTES
# This file contains examples and instructions for defining all
# Oracle Network Client parameters. It should be possible to read
# this file and setup a Client by uncommenting parameter definitions
# and substituting values. The comments should provide enough
# explanation to enable a reasonable user to manage his TNS connections
# without having to resort to 'real' documentation.
# SECTIONS
# ONames Client
# Namesctl
# Native Naming Adpaters
# MODIFIED
# skanjila 06/06/97 - Correct default for Automatic_IPC
# eminer 05/15/97 - Add the relevant onrsd parameters.
# asriniva 04/23/97 - Merge with version from doc
# ggilchri 03/31/97 - mods
# bvasudev 02/07/97 - Change sqlnet.authentication_services documentation
# bvasudev 11/25/96 - Merge sqlnet.ora transport related parameters
# asriniva 11/12/96 - Revise with new OSS parameters.
# asriniva 11/05/96 - Add ANO parameters.
# - ONames Client ----------------------------------------------------
#names.default_domain = world
#Syntax: domain-name
#Default: NULL
# Indicates the domain from which the client most often requests names. When
# this parameter is set the default domain name (for example, US.ACME), the
# domain name will be automatically appended to any unqualified name in an
# ONAmes request (query, register, deregister, etc). Any name which contains
# an unescaped dot ('.') will not have the default domain appended. Simple
# names may be qualified with a trailing dot (for example 'rootserver.').
#names.initial_retry_timeout = 30
#Syntax: 1-600 seconds
#Default: 15 (OSD)
# Determines how long a client will wait for a response from a Names Server
# before reiterating the request to the next server in the preferred_servers
# list.
#names.max_open_connections = 3
#Syntax: 3-64
#Default: ADDRS in preferred_servers
# Determines how many connections an ONames client may have open at one time.
# Clients will ordinarily keep connections to servers open once they are
# established until the operation (or session in namesctl) is complete. A
# connection will be opened whenever needed, and if the maximum would be
# exceeded the least recently used connection will be closed.
#names.message_pool_start_size = 10
#Syntax: 3-256
#Default: 10
# Determines the initial number of messages allocated in the client's message
# pool. This pool provides the client with pre-allocated messages to be used
# for requests to ONames servers. Messages which are in the pool and unused
# may be reused. If a message is needed and no free messages are available in
# the pool more will be allocated.
#names.preferred_servers = (address_list =
# (address=(protocol=ipc)(key=n23))
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (address=(protocol=tcp)(host=cicada)(port=1575))
#Syntax: ADDR_LIST
#Default: Well-Known (OSD)
# Specifies a list of ONames servers in the client's region; requests will be
# sent to each ADDRESS in the list until a response is recieved, or the list
# (and number of retries) is exhausted.
# Addresses of the following form specify that messages to the ONames server
# should use Oracle Remote Operations (RPC):
# (description =
# (address=(protocol=tcp)(host=nineva)(port=1383))
# (connect_data=(rpc=on))
#names.request_retries = 2
#Syntax: 1-5
#Default: 1
# Specifies the number of times the client should try each server in the list
# of preferred_servers before allowing the operation to fail.
#names.directory_path
#Syntax: <adapter-name>
#Default: TNSNAMES,ONAMES,HOSTNAME
# Sets the (ordered) list of naming adaptors to use in resolving a name.
# The default is as shown for 3.0.2 of sqlnet onwards. The default was
# (TNSNAMES, ONAMES) before that. The value can be presented without
# parentheses if only a single entry is being specified. The parameter is
# recognized from version 2.3.2 of sqlnet onward. Acceptable values include:
# TNSNAMES -- tnsnames.ora lookup
# ONAMES -- Oracle Names
# HOSTNAME -- use the hostname (or an alias of the hostname)
# NIS -- NIS (also known as "yp")
# CDS -- OSF DCE's Cell Directory Service
# NDS -- Novell's Netware Directory Service
# - Client Cache (ONRSD) ---------------------------------------------
names.addresses = (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Syntax: ADDR
Default: (ADDRESS=(PROTOCOL=IPC)(KEY=ONAMES))
Address on which the client cache listens (is available to clients).
Any valid TNS address is allowed. The default should be used if at
all possible; clients have this entry hardwired as the first line
of their server-list file (sdns.ora). If the address is set to a
non-default value the client's preferred_servers parameter should
be set to include the client-cache address first.
names.authority_required = False
Syntax: T/F
Default: False
Determines whether system querys (for the root etc) require Authoritative
answers.
names.auto_refresh_expire = 259200
Syntax: Number of seconds, 60-1209600
Default: 259200
This is the amount of time (in seconds) the server will cache the addresses
of servers listed in server-list file (sdns.ora). When this time expires the
server will issue another query to the servers in those regions to refresh
the data.
names.auto_refresh_retry = 180
Syntax: Number of seconds, 60-3600
Default: sec.     180
This set how often the server will retry when the auto_refresh query fails.
names.cache_checkpoint_file = cache.ckp
Syntax: filename
Default: $ORACLE_HOME/network/names/ckpcch.ora
Specifies the name of the operating system file to which the Names Server
writes its foreign data cache.
names.cache_checkpoint_interval = 7200
Syntax: Number of seconds, 10-259200
Default: 0 (off)
Indicates the interval at which a Names Server writes a checkpoint of its
data cache to the checkpoint file.
names.default_forwarders=
(FORWARDER_LIST=
(FORWARDER=
(NAME= rootserv1.world)
(ADDRESS=(PROTOCOL=tcp)(PORT=42100)(HOST=roothost))))
Syntax: Name-Value/address_list
Default: NULL
A list (in NV form) of the addresses of other servers which should be used to
forward querys while in default_forwarder (slave) mode. NAME is the global
names for the server to which forwards whould be directed, and ADDRESS is its
address.
names.default_forwarders_only = True
Syntax: T/F
Default: False
When set to true this server will use the servers listed in default_forwarders
to forward all operations which involve data in foreign regions. Otherwise it
will use the servers defined in the server-list file (sdns.ora) in addition
to any defined in the default_forwarders parameter.
names.log_directory = /oracle/network/log
Syntax: directory
Default: $ORACLE_HOME/network/log
Indicates the name of the directory where the log file for Names Server
operational events are written.
names.log_file = names.log
Syntax: filename
Default: names.log
The name of the output file to which Names Server operational events are
written.
names.log_stats_interval = 3600
Syntax: Number of seconds, 10-ub4max
Default: sec.     0 (off)
Specifies the number of seconds between statistical entries in log file.
names.log_unique = False
Syntax: T/F
Default: False
If set to true the server will guarantee that the log file will have a unique
name which will not overwrite any existing files (note that log files are
appended to, so log information will not be lost if log_unique is not true).
names.max_open_connections = 10
Syntax: 3-64
Default: 10
Specifies the number of connections that the Names Server can have open at any
given time. The value is generated as the value 10 or the sum of one
connection for listening, five for clients, plus one for each foreign domain
defined in the local administrative region, whichever is greater. Any
operation which requires the server to open a network connection will use
an already open connection if it is available, or will open a connection
if not. Higher settings will save time and cost network resources; lower
settings save network resources, cost time.
names.max_reforwards = 2
Syntax: 1-15
Default: 2
The maximum number of times the server will attempt to forward a certain
operation.
names.message_pool_start_size = 24
Syntax: 3-256
Default: 10
Determines the initial number of messages allocated in the server's message
pool. This pool provides the server with pre-allocated messages to be used
for incoming or outgoing messages (forwards). Messages which are in the pool
and unused may be reused. If a message is needed and no free messages are
available in the pool more will be allocated.
names.no_modify_requests = False
Syntax: T/F
Default: False
If set to true, the server will refuse any operations which modify the
data in its region (it will still save foreign info in the cache which is
returned from foreign querys).
names.password = 625926683431AA55
Syntax: encrypted string
Default: NULL
If set the server will require that the user provide a password in his
namesctl session (either with sqlnet.ora:namesctl.server_password or 'set
password') in order to do 'sensitive' operations, like stop, restart, reload.
This parameter is generally set in encrypted form, so it can not be set
manually.
names.reset_stats_interval = 3600
Syntax: 10-ub4max
Default: 0 (off)
Specifies the number of seconds during which the statistics collected by the
Names Servers should accumulate. At the frequency specified, they are reset
to zero. The default value of 0 means never reset statistics.
names.trace_directory = /oracle/network/trace
Syntax: directory
Default: $ORACLE_HOME/network/trace
Indicates the name of the directory to which trace files from a Names Server
trace session are written.
names.trace_file = names.trc
Syntax: filename
Default: names.trc
Indicates the name of the output file from a Names Server trace session.
names.trace_func # NA
Syntax: T/F
Default: False
Internal mechanism to control tracing by function name.
names.trace_level = ADMIN
Syntax: T/F
Default: False
Syntax: {OFF,USER,ADMIN,0-16}
Default: OFF (0)
Indicates the level at which the Names Server is to be traced.
Available Values:
     0 or OFF - No trace output
     4 or USER - User trace information
     10 or ADMIN - Administration trace information
     16 or SUPPORT - WorldWide Customer Support trace information
names.trace_mask = (200,201,202,203,205,206,207)
Syntax: list of numbers
Default: NULL
Internal mechanism to control trace behavior.
names.trace_unique = True
Syntax: T/F
Default: False
Indicates whether each trace file has a unique name, allowing multiple trace
files to coexist. If the value is set to ON, a process identifier is appended
to the name of each trace file generated.
# - Namesctl ---------------------------------------------------------
#namesctl.trace_directory = /oracle/network/trace
#Syntax: directory
#Default: $ON/trace
# Indicates the name of the directory to which trace files from a namesctl
# trace session are written.
#namesctl.trace_file = namesctl.trc
#Syntax: filename
#Default: namesctl.trc
# Indicates the name of the output file from a namesctl trace session.
#namesctl.trace_func # NA
#Syntax: word list
#Default: NULL
# Internal mechanism to control tracing by function name.
#namesctl.trace_level = ADMIN
#Syntax: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
# Indicates the level at which the namesctl is to be traced.
# Available Values:
#     0 or OFF - No trace output
#     4 or USER - User trace information
#     10 or ADMIN - Administration trace information
#     16 or SUPPORT - WorldWide Customer Support trace information
#namesctl.trace_mask # NA
#Syntax: number list
#Default: NULL
# Internal mechanism to control trace behavior.
#namesctl.trace_unique = True
#Syntax: T/F
#Default: False
# Indicates whether each trace file has a unique name, allowing multiple trace
# files to coexist. If the value is set to ON, a process identifier is appended
# to the name of each trace file generated.
#namesctl.no_initial_server = False
#Syntax: T/F
#Default: False
# If set to TRUE namesctl will suppress any error messages when namesctl is
# unable to connect to a default names server.
#namesctl.internal_use = True
#Syntax: T/F
#Default: False
# If set to true namesctl will enable a set of internal undocumented commands.
# All internal commands are preceded by an underscore ('_') in order to
# distinguish them as internal. Without going into details, the commands
# enabled are:
# adddata createname deletename
# fullstatus ireplacedata newttlname
# pause                 remove_data renamename
# replacedata start                 walk*
# There are also a set of names server variables which may be set when
# namesctl is in internal mode:
# authorityrequired autorefresh*
# cachecheckpoint_interval cachedump
# defaultautorefresh_expire defaultautorefresh_retry
# defaultforwarders_only forwardingdesired
# maxreforwards modifyops_enabled
# nextcache_checkpoint nextcache_flush
# nextstat_log nextstat_reset
# reload                         request_delay
# restart                        shutdown
#namesctl.noconfirm = True
#Syntax: T/F
#Default: False
# When set to TRUE namesctl will suppress the confirmation prompt when
# sensitive operations (stop, restart, reload) are requested. This is
# quite helpful when using namesctl scripts.
#namesctl.server_password = mangler
#Syntax: string
#Default: NULL
# Automatically sets the password for the names server in order to perform
# sensitive operations (stop, restart, reload). The password may also be
# set manually during a namesctl session using 'set password'.
#namesctl.internal_encrypt_password = False
#Syntax: T/F
#Default: True
# When set to TRUE namesctl will not encrypt the password when it is sent to
# the names server. This would enable an unencrypted password to be set in
# names.ora:names.server_password
# - Native Naming Adpaters -------------------------------------------
#names.dce.prefix = /.:/subsys/oracle/names
#Syntax: DCE cell name
#Default: /.:/subsys/oracle/names
#Specifies the DCE cell (prefix) to use for name lookup.
#names.nds.name_context = personnel.acme
#Syntax: NDS name
#Default: (OSD?)
# Specifies the default NDS name context in which to look for the name to
# be resolved.
#names.nis.meta_map # NA
# Syntax: filename
# Default: sqlnet.maps
# Specifies the file to be used to map NIS attributes to an NIS mapname.
# Currently unused.
# - Advanced Networking Option Authentication Adapters ----------------
#sqlnet.authentication_services
# Syntax: A single value or a list from {beq, none, all, kerberos5,
#       cybersafe, securid, identitx}
# Default: NONE
# Enables one or more authentication services. To enable
# authentication via the Oracle Security Server, use (beq, oss). If
# the Advanced Networking Option has been installed with Kerberos5
# support, using (beq, kerberos5) would enable authentication via
# Kerberos.
sqlnet.authentication_services=(beq, oss)
## Parmeters used with Kerberos adapter.
#sqlnet.kerberos5_cc_name
# Syntax: Any valid pathname.
# Default: /tmp/krb5cc_<uid>
# The Kerberos credential cache pathname.
#sqlnet.kerberos5_cc_name=/tmp/mycc
#sqlnet.kerberos5_clockskew
# Syntax: Any positive integer.
# Default: 300
# The acceptable difference in the number of seconds between when a
# credential was sent and when it was received.
#sqlnet.kerberos5_clockskew=600
#sqlnet.kerberos5_conf
# Syntax: Any valid pathname.
# Default: /krb5/krb.conf
# The Kerberos configuration pathname.
#sqlnet.kerberos5_conf=/tmp/mykrb.conf
#sqlnet.kerberos5_realms
# Syntax: Any valid pathname
# Default: /krb5/krb.realms
# The Kerberos host name to realm translation file.
#sqlnet.kerberos5_realms=/tmp/mykrb.realms
#sqlnet.kerberos5_keytab
# Syntax: Any valid pathname.
# Default: /etc/v5srvtab
# The Kerberos secret key file.
#sqlnet.kerberos5_keytab=/tmp/myv5srvtab
#sqlnet.authentication_kerberos5_service
# Syntax: Any string.
# Default: A default is not provided.
# The Kerberos service name.
#sqlnet.authentication_kerberos5_service=acme
## Parmeters used with CyberSAFE adapter.
#sqlnet.authentication_gssapi_service
# Syntax: A correctly formatted service principal string.
# Default: A default is not provided.
# The CyberSAFE service principal
#sqlnet.authentication_gssapi_service=acme/[email protected]
## Parmeters used with Identix adapter.
#sqlnet.identix_fingerprint_method
# Syntax: Must be oracle.
# Default: A default is not provided.
# The Identix authentication server method
#sqlnet.identix_fingerprint_method=oracle
#sqlnet.identix_fingerprint_database
# Syntax: Any string.
# Default: A default is not provided.
# The Identix authentication server TNS alias
#sqlnet.identix_fingerprint_database=ofm
#sqlnet.identix_fingerprint_database_user
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known username.
#sqlnet.identix_fingerprint_database_user=ofm_client
#sqlnet.identix_fingerprint_database_password
# Syntax: Any string
# Default: A default is not provided.
# The Identix authentication service well known password.
#sqlnet.identix_fingerprint_database_password=ofm_client
# - Advanced Networking Option Network Security -------------------------
#sqlnet.crypto_checksum_client
#sqlnet.crypto_checksum_server
#sqlnet.encryption_client
#sqlnet.encryption_server
# These four parameters are used to specify whether a service (e.g.
# crypto-checksumming or encryption) should be active:
# Each of the above parameters defaults to ACCEPTED.
# Each of the above parameters can have one of four possible values:
# value          meaning
# ACCEPTED     The service will be active if the other side of the
#          connection specifies "REQUESTED" or REQUIRED" and
#          there is a compatible algorithm available on the other
#          side; it will be inactive otherwise.
# REJECTED     The service must not be active, and the connection
#          will fail if the other side specifies "REQUIRED".
# REQUESTED     The service will be active if the other side specifies
#          "ACCEPTED", "REQUESTED", or "REQUIRED" and there is a
#          compatible algorithm available on the other side; it
#          will be inactive otherwise.
# REQUIRED     The service must be active, and the connection will
#          fail if the other side specifies "REJECTED" or if there
#          is no compatible algorithm on the other side.
#sqlnet.crypto_checksum_types_client
#sqlnet.crypto_checksum_types_server
#sqlnet.encryption_types_client
#sqlnet.encryption_types_server
# These parameters control which algorithms will be made available for
# each service on each end of a connection:
# The value of each of these parameters can be either a parenthesized
# list of algorithm names separated by commas or a single algorithm
# name.
# Encryption types can be: RC4_40, RC4_56, RC4_128, DES, DES40
# Encryption defaults to all the algorithms.
# Crypto checksum types can be: MD5
# Crypto checksum defaults to MD5.
#sqlnet.crypto_seed ="4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf"
#sqlnet.crypto_checksum_server = required
#sqlnet.encryption_server = required
# - Oracle Security Server ---------------------------------------------
#oss.source.my_wallet
# Syntax: A properly formatted NLNV list.
# Default: Platform specific. Unix: $HOME/oracle/oss
# The method for retrieving and storing my identity.
#oss.source.my_wallet
# =(source
# =(method=file)
# (method_data=/dve/asriniva/oss/wallet)
#oss.source.location
# Syntax: A properly formatted NLNV list.
# Default: Oracle method, oracle_security_service/oracle_security_service@oss
# The method for retrieving encrypted private keys.
#oss.source.location
# =(source
# =(method=oracle)
# (method_data=
# (sqlnet_address=andreoss)
# - Sqlnet(v2.x) and Net3.0 Client ------------------------------------------
# In the following descriptions, the term "client program" could mean
# either sqlplus, svrmgrl or any other OCI programs written by users
#trace_level_client = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the client program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
#     4 or USER - User trace information
#      10 or ADMIN - Administration trace information
#     16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#trace_directory_client = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
# site)
#Purpose: Indicates the name of the directory to which trace files from
# the client execution are written.
#Supported since: v2.0
#trace_file_client = /oracle/network/trace/cli.trc
#Possible values: Any valid file name
#Default:     $ORACLE_HOME/network/trace/cli.trc ($ORACLE_HOME =
#          /oracle at customer site)
#Purpose: Indicates the name of the file to which the execution trace
# of the client is written to.
#Supported since: v2.0
#trace_unique_client = ON
#Possible values: {ON, OFF}
#Default: OFF
#Purpose: Used to make each client trace file have a unique name to
#     prevent each trace file from being overwritten by successive
#     runs of the client program
#Supported since: v2.0
#log_directory_client = /oracle/network/log
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/log ($ORACLE_HOME = /oracle at customer
#     site)
#Purpose: Indicates the name of the directory to which the client log file
#     is written to.
#Supported since: v2.0
#log_file_client = /oracle/network/log/sqlnet.log
#Possible values: This is a default value, u cannot change this
#Default: $ORACLE_HOME/network/log/sqlnet.log ($ORACLE_HOME=/oracle in
# customer site)
#Purpose: Indicates the name of the log file from a client program
#Supported since: v2.0
#log_directory_server = /oracle/network/trace
#Possible values: Any valid diretcory path with write permission
#Default: $ORACLE_HOME/network/trace ( $ORACLE_HOME=/oracle at customer
#     site)
#Purpose: Indicates the name of the directory to which log files from the
#      server are written
#Supported since: v2.0
#trace_directory_server = /oracle/network/trace
#Possible values: Any valid directory path with write permission
#Default: $ORACLE_HOME/network_trace ( $ORACLE_HOME=/oracle at customer
#     site)
#Purpose: Indicates the name of the directory to which trace files from
# the server are written
#Supported since: v2.0
#trace_file_server = /orace/network/trace/svr_<pid>.trc
#Possible values: Any valid filename
#Default: $ORACLE_HOME/network/trace/svr_<pid>.trc where <pid? stands for
# the process id of the server on UNIX systems
#Purpose: Indicates the name of the file to which the execution trace of
# the server program is written to.
#Supported since: v2.0
#trace_level_server = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#use_dedicated_server = ON
#Possible values: {OFF,ON}
#Default:      OFF
#Purpose: Forces the listener to spawn a dedicated server process for
#     sessions from this client program.
#Supported since: v2.0
#use_cman = TRUE
#Possible values: {TRUE, FALSE}
#Default:     FALSE
#Purpose:
#Supported since: v3.0
#tnsping.trace_directory = /oracle/network/trace
#Possible values: Any valid directory pathname
#Default: $ORACLE_HOME/network/trace ($ORACLE_HOME=/oracle at customer
#     site)
#Purpose: Indicates the directory to which the execution trace from
#     the tnsping program is to be written to.
#Supported since: v2.0
#tnsping.trace_level = ADMIN
#Possible values: {OFF,USER,ADMIN,0-16}
#Default: OFF (0)
#Purpose: Indicates the level at which the server program
# is to be traced.
# Available Values:
# 0 or OFF - No Trace output
# 4 or USER - User trace information
# 10 or ADMIN - Administration trace information
# 16 or SUPPORT - Worldwide Customer Support trace information
#Supported since: v2.0
#sqlnet.expire_time = 10
#Possible values: 0-any valid positive integer! (in minutes)
#Default: 0 minutes
#Recommended value: 10 minutes
#Purpose: Indicates the time interval to send a probe to verify the
#     client session is alive (this is used to reclaim watseful
#     resources on a dead client)
#Supported since: v2.1
#sqlnet.client_registration = <unique_id>
#Possible values:
#Default: OFF
#Purpose: Sets a unique identifier for the client machine. This
#     identifier is then passed to the listener with any connection
#     request and will be included in the Audit Trail. The identifier
#     can be any alphanumeric string up to 128 characters long.
#Supported since: v2.3.2
#bequeath_detach = YES
#Possible values: {YES,NO}
#Default: NO
#Purpose: Turns off signal handling on UNIX systems. If signal handling
#     were not turned off and if client programs written by users make
#     use of signal handling they could interfere with Sqlnet/Net3.
#Supported since: v2.3.3
#automatic_ipc = OFF
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: Force a session to use or not to use IPC addresses on the
#     client's node.
#Supported since: v2.0
#disable_oob = ON
#Possible values: {ON,OFF}
#Default: OFF
#Purpose: If the underlying transport protocol (TCP, DECnet,...) does
# not support Out-of-band breaks, then disable out-of-band
#     breaks
#Supported since: v2.0
#

Insufficient privileges: is there an answer?

Similar Messages

Maybe you are looking for