"Insufficient resources for this video mode" error in IMAQ for IEEE-1394 1.1
I'm using 3 Sony DFW-X700 cameras (1024x768 YUV 4:2:2) and 1 Sony XCD-X700 (1024x768 8-bit mono) connected to 2 IEEE-1394 adapter cards (3 ports each). I'm running LV 6.1 on WinXP Pro PT.
I've tried several acquisition modes, and the only one that works fine is 'continuous acquisition', using 1 buffer per camera. The problem is that I can only setup 2 color cameras and 1 mono camera. If I try to setup 3 color cameras, I get an 'insufficient resources for this video mode' error. I would like to know if it's possible to configure more memory for the acquisition buffers under IEEE-1394 so that I can avoid this error.
Habil,
You might want to try to lower the frame rate of the cameras. This error is caused because the driver is able to allocate only part of the firewire bandwidth for your image acquisition, and a three camera color acquisition requires a huge amount of bandwidth. This is currently an issue that our R&D department worked this period and is going to be resolved in the next release of the driver. This release should be ready in one month. Good luck!
Nestor.
Nestor
National Instruments
Similar Messages
-
Digital Input Cannot Display this Video Mode Optimum Resolution 1280 x 1024 60hz.
HP Pavilion h8-1360t, Windows7 home premium 64-bit, AMD Radeon HD 7570 graphics card.
error message: Digital Input Cannot Display this Video Mode Optimum Resolution 1280 x 1024 60hz.
I get the error message as soon as Windows opens and the desktop displays. Then it goes black with that message. I've been using the computer for awhile and I had it so that when I maximized a window it would go across both screens. I have two monitors on the graphics card. Somehow I changed the settings so that a program would maximize to one monitor or the other. That is how I want it to work. Maybe I activated HydraVision. Now I have the problem when I start.
Also now when I boot to Safe Mode I get the message that there is no AMD graphics driver installed, or it is not functioning properly. I have tried to update it and the computer tells me I have the most recent version installed. I would like to uninstall it and reinstall it, but I'm a little worried I won't get it installed and be without video. Something like that happened to me once before years ago.
Could someone tell me what I should do please?
Thanks,
Jim AllenHP support is here:
http://www8.hp.com/us/en/contact-hp/contact.html
In safe mode you should uninstall the driver, then try to boot normal again.
Then check if driver was installed by win7.
If not go go AMD website and download latest driver for your card.
V.
*** Say 'Thanks' with Kudos *** -
Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure,
review the log files.
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2014-04-10 11:51:11
End time: 2014-04-10 11:51:49
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine name: VMSPDB2
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: Australia
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database
Engine Services 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server
Replication 1033 Enterprise
Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text
and Semantic Extractions for Search 1033 Enterprise Edition 11.1.3000.0 No
Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data
Quality Services 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Basic 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
Client Tools Connectivity 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Integration Services 1033
Enterprise Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 1
KBArticle: KB2931078
KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
PatchType: QFE
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 11.1.3412.0
ProductVersion: 11.1.3000.0
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2012-KB2931078-x64.exe
Installation location: e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: false
CLUSTERPASSIVE: false
CONFIGURATIONFILE:
ENU: false
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCEID: <empty>
INSTANCENAME: <empty>
QUIET: false
QUIETSIMPLE: false
SQMREPORTING: false
UIMODE: Normal
X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
HResult : 0x80131500
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
HelpLink.EvtType =
0xB2652E58@0xDC80C325
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: System.ComponentModel.Win32Exception
Message:
Not all privileges or groups referenced are assigned to the caller.
HResult : 0x80004005
Error : 1300
Stack:
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey
key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey
machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action: InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are
assigned to the caller.
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess
registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView
regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: --- End of inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the following file to Watson reporting: C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01) 2014-04-10 11:51:39 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp: Data:
(01) 2014-04-10 11:51:39 Slp: HelpLink.ProdName = Microsoft SQL Server
(01) 2014-04-10 11:51:39 Slp: HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39 Slp: HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath,
String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01) 2014-04-10 11:51:39 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80004005
(01) 2014-04-10 11:51:39 Slp: Error : 1300
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx,
String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File 'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: Error result: -2146233088
(01) 2014-04-10 11:51:51 Slp: Result facility code: 19
(01) 2014-04-10 11:51:51 Slp: Result error code: 5376
(01) 2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Cannot Display This Video Mode - Linux
I just installed OELINUX 4.7 , was seeing big display, went to system config and tried to monitor display, and rebooted the machine, now the display screen is stuck with message
Cannot Display This Video Mode
Optimum resolutoin 1024*768 60Hz
wondering how to fix it becasue i can't even go any where, how to enter linux with safe mode etc or any suggestion...Solved.......
start in safe/maintenance mode
ctrl+alt+f1
Set the Dispaly vi /etc/X11/xorg.conf & adjust it like
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" #changed from "1280x1024"
EndSubSection
EndSection
############################################################# -
I was trying to fix my screen resolution and now it's stuck on auto detect cannot display this video mode. I tried another monitor and it still won't show anything. I'm locked out
Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next try Safe Mode boot and and then normal boot
OS X: What is Safe Boot, Safe Mode? -
WHY? 3 out of 4 of my vimeo videos coming up with 'oops the embed code for this video isn't valid'!
I have inserted my showreel, its working fine, but now I have tried to embed 3 others videos, they all come up with 'oops the embed code for this video isn't working'
I really don't understand why?
HollyHello,
How are you trying to preview the page ? "Preview"tab in Muse or Preview Page in Browser.
Do you have any URL for us to see ? Please share the codes that you are using to embed the video.
Regards
Vivek -
Cannot display this video mode
I have a macbook pro and I am trying two hook up an older dell monitor with a VGA to display port adaptor, but all I get is "Cannot Display This Video Mode." I've tried changing the resolution but it doesn't seem to be working. any help would be appreciated.
thanks, ZachHi there,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W. -
Data source for this data connection isn't registered for Power BI
Hi, I am getting this error when I set Schedule Data Refresh to refresh data from db. How do I register my connection to the data source? Is this a fix on SQL server or Power BI?
FAILURE INFORMATION
Failure
Correlation ID: c5132b7a-3c54-4f12-a048-3ddcf0b95f26
Data connection Status
SqlServer twcperfsql1 OfficePerf OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Tell your Power BI admin the admin needs to register this connection to this on-premises data source.
Thanks for your help.I'm running into the same issue, I did configure the Gateway and then the data source in Power Bi.
When I go to the Power BI Admin Center and click on "Test Connection" it seems to be working. But when I refresh the data from Power BI it doesn't work. Now if I edit the spreadsheet in excel and refresh the data in PowerPivot then it works. So
not sure why the solution doesn't refresh from the automated service in Power BI without this useless error.
Thanks
Fabian
In case it helps this is the actual error:
Failure Correlation ID: ecc73a16-7264-45b2-9baf-e3448f007211
Power Query - dbo_TableAOnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center.
Also further information I have found so far is that the Gateway is receiving the requests for the refresh and it shows the message below, so the data source is found and communication seems to be happening from server to client and back, not sure why server
doesn't seem to like the data the Gateway is sending back to server.
The feed 'dbo_TableA' was successfully accessed at 7/15/2014 4:23:26 PM.
The request took 00:00:00.0000105 seconds.
Activity ID: e8464e5d-3f0a-49c2-b10b-450fec3e5940 -
Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!
This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password. Even with an Admin account you must have a password to install software.
If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal. When the Terminal window opens, at the cursor type exactly:
resetpassword
and press Enter. When the Reset Password window opens, select the internal hard drive, and then the user account. Type a new password twice, leave the Hint blank, and then Save. Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
And you have a new password for your account. -
A resource in this file uses an unknown language (for default MFC project)
Visual Studio 2013. I created a default MCF project and tried to open rc-file via Resource View. No custom changes were made.
I got an error: "A resource in this file uses an unknown language: Neutral (Default) (unknown sub-lang: 0x3). Unable to open this file." I used AFX_TARG_ENU: language 9 (english), sublanguage 1. There is no language value
in my project defined as 0x3 in winnt.h.Hi JGANOL,
Based on your issue, could you please tell me if you get same error when you re-create a new Resource Script File in the MFC project?
https://msdn.microsoft.com/en-us/library/hcctd63y.aspx
https://msdn.microsoft.com/en-us/library/sxdy04be.aspx
(1) If you get same error message, I suggest you try to reset the VS setting file by going to the Tools->Import and Export Settings... check this issue again.
If it still could not help you, maybe you will need to repair or re-install the VS2013 check this issue again.
(2)If you did not get same error message, I think that the issue may be related to the specified the MFC project. So I suggest you can tell me the detail steps about how you create a MFC project.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
No matching unique or primary key for this column-list --error
CREATE TABLE CUSTOMER(CUS_NUM NUMBER(10) PRIMARY KEY,CUS_NAME VARCHAR2(50),ADDRESS VARCHAR2(50));
CREATE TABLE ITEM(ITEM_NUM NUMBER(10),ITEM_DESC VARCHAR2(50),TYPE VARCHAR2(50),ITEM_STATUS VARCHAR2(50),
CONSTRAINT PK_ITEM PRIMARY KEY(ITEM_NUM,TYPE));
CREATE TABLE ITEM_TYPE(TYPE VARCHAR2(50) PRIMARY KEY,TYPE_NAME VARCHAR2(50),SKU VARCHAR2(50),RATING VARCHAR2(50));
CREATE TABLE ORDERS(ORDER_NUMBER NUMBER(10),CUS_NUM NUMBER(10),ITEM_NUM NUMBER(10),ORDER_POINT VARCHAR2(50),DISPATCH_POINT VARCHAR2(50),
PRIORITY VARCHAR2(50),ORDER_STATUS VARCHAR2(50),
CONSTRAINT PK_ORDERS PRIMARY KEY(ORDER_NUMBER,ITEM_NUM),
CONSTRAINT FK1_ORDERS FOREIGN KEY (CUS_NUM) REFERENCES CUSTOMER(CUS_NUM),
CONSTRAINT FK2_ORDERS FOREIGN KEY (ITEM_NUM) REFERENCES ITEM(ITEM_NUM));
Hi,friends i created tables as above when i creating 'ORDERS' table the error will fir as "ORA-02270: no matching unique or primary key for this column-list".
can any body solve this issue.
Cheers,
Sudhir reddy.For your own sanity, you should learn to format your code, or use a tool to do it for you. For the sanity of the forum members, you should preserve that code using the \ tagsCREATE TABLE CUSTOMER
CUS_NUM NUMBER(10) PRIMARY KEY,
CUS_NAME VARCHAR2(50),
ADDRESS VARCHAR2(50)
CREATE TABLE ITEM
ITEM_NUM NUMBER(10),
ITEM_DESC VARCHAR2(50),
TYPE VARCHAR2(50),
TYPE is a reserved word. Call it ITEM_TYPEITEM_STATUS VARCHAR2(50),
CONSTRAINT PK_ITEM PRIMARY KEY(ITEM_NUM,TYPE)
CREATE TABLE ITEM_TYPE
TYPE VARCHAR2(50) PRIMARY KEY,
again, with the reserved word.TYPE_NAME VARCHAR2(50),
SKU VARCHAR2(50),
RATING VARCHAR2(50)
CREATE TABLE ORDERS
ORDER_NUMBER NUMBER(10),
be consistent. NUM or NUMBER. Pick one and stick with it.CUS_NUM NUMBER(10),
ITEM_NUM NUMBER(10),
ORDER_POINT VARCHAR2(50),
DISPATCH_POINT VARCHAR2(50),
PRIORITY VARCHAR2(50),
ORDER_STATUS VARCHAR2(50),
CONSTRAINT PK_ORDERS PRIMARY KEY(ORDER_NUMBER,ITEM_NUM),
CONSTRAINT FK1_ORDERS FOREIGN KEY (CUS_NUM) REFERENCES CUSTOMER(CUS_NUM),
CONSTRAINT FK2_ORDERS FOREIGN KEY (ITEM_NUM) REFERENCES ITEM(ITEM_NUM) -
MP4 Video throwing error: Invalid URL for Web Content Overlay
Converted a 15 second flv video to the following using Handbrake:
mp4
H.264 codec
"Placed" mp4 file into my article
Set Autoplay= On and 0.125s delay
Try to preview via InDesign a get the error: Invalid URL for Web Content Overlay
Try to update my article via Folio Builder and I get the same error.It seems that you "placed" your video into the frame selected as Web Content in Folio Overlays Panel.
Delete that frame.
Place (in the normal InDesign way, not"place") your mp4 file onto the page.
Adjust the size of the frame to your video measurements.
Look at the Folio Overlays Panel. Your placed file should appear ther as Video Overlay.
Set your options and you are done. -
please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help
Hello jayparks41
There are a few things to try and the article below can walk you through them before trying to hunt down a Snow Leopard install disk. I will say that it may come down to reinstall Snow Leopard but also before any troubleshooting, make sure to have a safe copy of your data.
OS X: About kernel panics
http://support.apple.com/kb/TS3742
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G. -
HT201442 WHAT CAN I DO FOR THIS PROBLEM? ERROR 3194
WHAT DO I DO ABOUT THIS PROBLEM ERROR 3194?
Well, if you didn't keep it in your iTunes library, on your computer, & then back that data up, you're out of luck if it's no longer available in the App store.
Apple warns to backup your purchases for this very reason. -
Windows Media Player Extension "Add-on for this website failed to run" except for Administrator
This is on a Windows server 2008 r2. I am trying to allow users to watch help videos at a vendor site. If I remote desktop using the Administrator, I can play the videos and if I check the "manage add-ons", I see Windows Media Player as an extension.
If I remote desktop on as a "normal user" and try to view the same video, I get the error message "An add-on for this website failed to run" and if I check the "manage add-ons", Windows Media Player extension is not there. That
makes sense, since if it is not there, it won't run.
Why isn't Windows Media Player extension showing up in IE 10 on the server for anyone other than Admin? How could I make this work? If I am somehow preventing this from taking place, where would I go on the server to change that?Hi,
Have you try adding this video website into trusted sites zone or compatibility view list?
Generally, improper security settings may casue failure to run some add-ons. So, please attempt to decrease security level for Internet Zone to check if this issue still occurs.
How do you think your issue is related to Windows Media Player extension? Based on my knowledge, Flash player plug-in can lead to the problem. Please reinstall your flash player for the current user.
Also, Please check in event log for more clues.
Andy Altmann
TechNet Community Support
Maybe you are looking for
-
How do I move my ipod library from one computer to another?
Help! How do I move my ipod library from one computer to another?
-
How do I disable Game Center in iOS 7?
I am currently using an iPhone 4S with iOS 7.1.2 and would like to disable the game center. I have repeatedly tried to sign out of it, only to be automatically signed back in.It is very frustrating as this is a completely useless tool the interferes
-
SCCM 2012 - Network requirements for Client communication to primary in a Cross Forest Environment
Hello, I have been trying to get some definitive answers on what network traffic is required between a client and a primary site versus a secondary in a cross forest scenario. Here is the scenario: Company A has an existing SCCM 2012 primary Site. Co
-
13) In FCP if you right click on a clip it shows you, amongst other info, the duration of the clip in the timeline. I can't seem to find that same information in PP. Does it exist in an easily accessible way and if so where? 14) In FCP when you have
-
Inconsistant transport requests after local client copy
Dear experts, our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basi