Insufficient security privilge to add a row - SunMC 3.5.1

Hi All,
I've a strange behaviour with my SunMC server.
Yesterday, I've made a fresh install and push a common config on some agents (+/-40) without any problem of security.
Today, I've tried to add a new process row to monitor but I received back an error like "Insufficient security privilege to add a row" on all my agents. I did nothing since yesterday. I've checked if my user was in the esadm group, it is.
Do anyone have an idea ?
Thanks in advance !
Quentin.

I've found a workaround just now.
I've relaunched on all my agents the command /opt/SUNWsymon/sbin/configure -r, to force the change of the seed password.
Now it's working correctly but I'll keep an eye on it as I don't see where I've made a change.
For your questions :
-are you using the same user that you used yesterday to load the modules on all 40 Agents?
YES
-are all 40 Agents reporting the security error, or just one/some of them
YES ALL
-was the "fresh install" just a fresh install of your SunMC Server, or the Agents as well?
Only the server but it was working for hours because i've reloaded the metrics on agents without any problems.
-have you tried to add the row manually? Or have you only tried with a Task/Managed-Jobs?
Both with the same results.
I've add the patch 118389-09 which apparently didn't correct anything but at least removed some doubts.
Many thanks,
Quentin.

Similar Messages

(SunMC agent: Mx000)Insufficient security privilege to load console info!!!

I create a user "smcuser" on SMC server, it is in group "platadmn" and "dom0adm",
In SMC console, it can monitor a M4000 agent, but it cannot monitor M5000 agent.
PS: i have created "smcuser" on XSCF of M4000/M5000 server.
When i click "Platform View", there is a error info "Insufficient security privilege to load console info!!!"

This is usually caused by incorrectly seeding the agents or when a user does not have the appropriate access to the system.
Was the agent seeded with the same seed value used on the Sun MC server?
Is the smcid userid in the /var/opt/SUNWsymon/cfg/esuers file and part of the esadm group?
Can you create a esmaster user account in UNIX and try logging in using that userid. Note: this is the Sun MC superuser account.
regards,
bobby
www.HalcyonInc.com
forums.HalcyonInc.com

Object failed to run due to insufficient security privileges

Recently migrated from BO XI and Crystal XI to bo 4.1sp2 and Crystal 2013.The recurring crystal reports were migared to new environemnt and schulded to run 1st of the month.There are 300+ reports.The report detail says all these reports are schduled by Adminisatrtor because It was migrated by administartor account.
First of the month all reports failed and error is 'object failed to run due to insufficient security privileges.
And In the event viewer, there were warning from source BusinessObject_cms
"The security for the object identified by 41173 could not be verified during schedule attempt."
Can someone help me to find out the root cause of this issue.thanks.

Hello,
There are many possible root causes.
First check that the migration was complete successfully using the Import Wizard or UMT.
Otherwise, this may occur if the owner was not migrated properly or if the universe contains some row level security..
I hope this helps.
Thanks & Regards,
Insaf

RFQ insufficient security or privacy level

Hello
I get the follwing error when adding a online RFQ to the system:
I am also not able to send out a Test e-mail?
Any Ideas?
<?xml version="1.0" encoding="utf-8" ?>
- <Msg xmlns="urn:com.sap.b1i.vplatform:entity" xmlns:b1il="urn:com.sap.b1i.sim:b1ilog" xmlns:b1im="urn:com.sap.b1i.sim:b1imessage" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:jdbc="urn:com.sap.b1i.adapter:jdbcadapter" xmlns:sim="urn:com.sap.b1i.sim:entity" xmlns:vpf="urn:com.sap.b1i.vplatform:entity" branch="3" MessageId="14051208440847750512C0A8B2220185" BeginTimeStamp="20140512084408" recording="false" logmsg="0012" SubMessageId="2" status="success" vBIU.errhdlg="" exceptionmsg="com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: com.sun.mail.smtp.SMTPSendFailedException: 550-Requested action not taken: mailbox unavailable 550 Insufficient security or privacy level. ; nested exception is: com.sun.mail.smtp.SMTPSenderFailedException: 550-Requested action not taken: mailbox unavailable 550 Insufficient security or privacy level." msglogexcl="false" handover2CentralSrv="" MessageLog="true">
- <Header>
<msglog step="Default message log" always="false" b1ifactive="true" />
<EA vBIU="sap.sl.purchquote.req" vPac="sap.B1RFQ" snd="0010000102" rcv="0010000000" out="" dir="/com.sap.b1i.vplatform.directory/ErrorActions/ErrorActions.xml" />
<Hard-Reset xmlns="" originalState="INCOMMIT" finalState="COMPLETED" />
- <ErrorHandler phase="2" async="Default error handling" sync="Default error handling" outbound="Default error handling" errorinbox="true">
- <delqueue status="false" qok="false">
<queue>Q.PRC_B1.0010000102</queue>
<stream>S.sap.sl.purchquote.req</stream>
</delqueue>
- <callvBIU status="false">
<queue>Q.INB_IQ_INTQ_ASYN_QS.0010000000</queue>
<stream>Default error handling</stream>
</callvBIU>
</ErrorHandler>
- <Resumption>
<starter ipo="/vP.0010000102.in_BEAE/com.sap.b1i.vplatform.runtime/INB_B1_EVNT_ASYN_EVT/INB_B1_EVNT_ASYN_EVT.ipo/proc" />
<restart id="processing" q="Q.PRC_B1.0010000102" s="S.sap.sl.purchquote.req" u="14051208440847750512C0A8B2220185.2" />
</Resumption>
<ProcStream>S.sap.sl.purchquote.req</ProcStream>
<IPO Id="INB_B1_EVNT_ASYN_EVT" tid="14051208113447750501C0A8B2223D60" />
<Sender Id="0010000102" ObjId="540000006" />
<vBIU Id="sap.sl.purchquote.req" SId="sap.B1RFQ" filter="" sndfilter="" phase="" />
<Successor Id="" Mode="" />
<Identification Ident="B1 Event" IdPar="n.a." />
<nsList />
</Header>
- <Body>
- <Payload Role="T" Type="B1Event" add="">
- <Event xmlns="" B1EventFilter="false">
- <b1e:b1events xmlns:b1e="urn:com.sap.b1i.sim:b1event">
- <b1e:b1event>
<b1e:eventsource>SAP_DEMO_OGD_2NKS</b1e:eventsource>
<b1e:objecttype>540000006</b1e:objecttype>
<b1e:transactiontype>A</b1e:transactiontype>
<b1e:usercode>manager</b1e:usercode>
<b1e:userid>manager</b1e:userid>
- <b1e:keys count="1">
- <b1e:key>
<b1e:name>DocEntry</b1e:name>
<b1e:value>11</b1e:value>
</b1e:key>
</b1e:keys>
<b1e:sourcesite>INITMOBILE77</b1e:sourcesite>
<b1e:sourceport>1433</b1e:sourceport>
<b1e:sourcetype>0</b1e:sourcetype>
<b1e:sld value="INITMOBILE77!!SAP_DEMO_OGD_2NKS" valueport="INITMOBILE77:1433!!SAP_DEMO_OGD_2NKS" />
</b1e:b1event>
</b1e:b1events>
- <b1ie:B1IEvent xmlns:b1ie="urn:com.sap.b1i.sim:b1ievent" SysId="0010000102" SysTypeId="B1.9.0" Task="I" LocalObjectType="540000006">
- <b1ie:PrimaryKeyList>
<b1ie:PrimaryKey Key="DocEntry" Value="11" />
</b1ie:PrimaryKeyList>
</b1ie:B1IEvent>
</Event>
</Payload>
<Payload Role="S" />
- <Payload id="ErrorInfos" iterationCount="0" reactivations="-1" tState="INCOMMIT">
<ipo uri="/vP.0010000102.prc_B1/com.sap.b1i.vplatform.runtime/PRC_B1/PRC_B1.ipo/proc" tid="14051208113447750567C0A8B2223756" tStamp="20140512084412" duration="-1" initiator="[HTTP]2044639498/B1iadmin" />
<bfd uri="/com.sap.b1i.vplatform.runtime/PRC_B1/PRC_B1.bfd" />
- <exception xmlns="urn:com.sap.b1i.xcellerator:spltdoc" type="hard" userdef="false">
<message>com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: com.sun.mail.smtp.SMTPSendFailedException: 550-Requested action not taken: mailbox unavailable 550 Insufficient security or privacy level. ; nested exception is: com.sun.mail.smtp.SMTPSenderFailedException: 550-Requested action not taken: mailbox unavailable 550 Insufficient security or privacy level.</message>
<usermsg />
<innermsg>550-Requested action not taken: mailbox unavailable 550 Insufficient security or privacy level.</innermsg>
</exception>
- <calls>
- <call id="B1Call_Proc">
- <Envelope xmlns="urn:com.sap.b1i.xcellerator:spltdoc">
- <Header>
<Action throwException="true" autoCommit="false">get</Action>
</Header>
- <Body>
- <BOM>
- <BO>
- <AdmInfo>
<Object>540000006</Object>
<Version>2</Version>
</AdmInfo>
- <QueryParams>
<DocEntry>11</DocEntry>
</QueryParams>
</BO>
</BOM>
</Body>
</Envelope>
</call>
- <call id="B1Call">
- <SimpleCall xmlns="urn:com.sap.b1i.xcellerator:spltdoc" throwException="false" autoCommit="false">
<Class>CompanyService</Class>
<Function>GetAdminInfo</Function>
<Parameters />
</SimpleCall>
</call>
- <call id="B1Call">
- <Envelope xmlns="urn:com.sap.b1i.xcellerator:spltdoc">
- <Header>
<Action throwException="false" autoCommit="false">getList</Action>
</Header>
- <Body>
- <BOM>
- <BO>
- <AdmInfo>
<Object>2</Object>
<Version>2</Version>
</AdmInfo>
- <QueryParams>
<CardCode>70000</CardCode>
</QueryParams>
</BO>
</BOM>
</Body>
</Envelope>
</call>
- <call id="B1Call">
- <Envelope xmlns="urn:com.sap.b1i.xcellerator:spltdoc">
- <Header>
<Action throwException="false" autoCommit="false">getList</Action>
</Header>
- <Body>
- <BOM>
- <BO>
- <AdmInfo>
<Object>11</Object>
<Version>2</Version>
</AdmInfo>
- <QueryParams>
<CardCode>70000</CardCode>
</QueryParams>
</BO>
</BOM>
</Body>
</Envelope>
</call>
- <call id="B1Call">
- <Envelope xmlns="urn:com.sap.b1i.xcellerator:spltdoc">
- <Header>
<Action throwException="false" autoCommit="false">get</Action>
</Header>
- <Body>
- <BOM>

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

To add additonal rows(text) in ALV report

Hi there,
I want to add additional ROWS at the bottom of each grouping.
Right now I am getting customer wise total comission amount but the requirement is on commsion amt ,i need to calculate 10 % tax and 2% tax and these taxes should get genrated below the commsion amt column as like below:
Company code Customer Commsion Amt
2000 101 1000
2000 101 2000
Total Comsion 3000
10% Service Tax 300
2% Edn Tax 6
Total 3306
2000 102 1230
2000 102 678
The output should be like this in ALV report .Could anyone plz help me out on this.
I will really appreciate your help.
Thanks,

Hi Archana,
You can have the subtotal displayed for each company code and commision in the alv.
At end of each comp code and customer , pass the total of the whole amount into a line and you can display a line of this total.
Your alv gets displayed like this .
2000 101 1000
2000 101 2000
Total Comsion 3000
10% Service Tax 300
2% Edn Tax 6
3306
Thanks,
Guru

Add a row after Total row in ALV report

Hi Experts,
I have a report is displayed by ALV format(not use function module to display it but use Class cl_gui_custom_container),I want to add a row after the total row. for example,
Customer   amount1    amount2    amount3
10000         1,234        1,000         2,000
10001         4,000        2,000         1,000
10002         1,300        1,000         3,000
11000         1,200        4,000         3,000
     Total:     7,734        8,000         9,000
Ratio%        31.27       32.34          36.39
the row of 'Total' is calculated by fieldcat-do_sum = 'X' But after the Total row we need a Ratio row to display the ratio. Yes we can calculate the total amout and ratio and then append it into the output itab, but we don't like this solution.We want to keep the total function in the ALV report.Any experts can poit me a direction. Thanks in advance.
Joe

Djoe,
First you need to handle the user command,in order to capture the button action. For this you need to implment a class, i am attaching sample codes here
In top include write the following code
CLASS lcl_event_handler DEFINITION .
PUBLIC SECTION .
    METHODS:
     handle_toolbar FOR EVENT toolbar                   " To add new functional buttons to the ALV toolbar
                     OF        cl_gui_alv_grid
                     IMPORTING e_object,
     handle_user_command FOR EVENT user_command          " To implement user commands
                        OF cl_gui_alv_grid
                        IMPORTING e_ucomm .
PRIVATE SECTION.
ENDCLASS.                                               " Lcl_event_handler DEFINITION
Now   <b>Class implementation</b>
CLASS lcl_event_handler IMPLEMENTATION .
METHOD handle_toolbar.                                " Handle Toolbar
    PERFORM f9500_handle_toolbar USING e_object.
ENDMETHOD .                                            " Handle_toolbar
METHOD handle_user_command .                          " Handle User Command
    PERFORM f9600_handle_user_command USING e_ucomm .
ENDMETHOD.
ENDCLASS .                                              " lcl_event_handler IMPLEMENTATION
FORM f9600_handle_user_command USING p_e_ucomm TYPE sy-ucomm.
CONSTANTS:c_newl(4) TYPE c
                      VALUE 'NEWL',               " New line
            c_copy(4) TYPE c
                      VALUE 'COPY',               " Copy
            c_corr(4) TYPE c
                      VALUE 'CORR'.               " Correction
CASE p_e_ucomm .
    WHEN c_newl.
Create a new line
      PERFORM f9610_insert_new_line.
ENDFORM.                                          " f9600_handle_user_command
FORM f9610_insert_new_line .
*Data Declarations
DATA: lt_rows     TYPE lvc_t_row,                 " Itab for row property
        ls_rows     TYPE lvc_s_row,                 " Work area for row
        lv_cntid    TYPE i.                         " Counter
DATA: gv_index TYPE sy-index.
CLEAR gs_last.
CALL METHOD gr_alvgrid->get_selected_rows
    IMPORTING
      et_index_rows = lt_rows.
READ TABLE lt_rows INTO ls_rows INDEX 1.
IF sy-subrc EQ 0.
    gv_index = ls_rows-index + 1.
ELSE.
    gv_index = 1.
ENDIF.
DESCRIBE TABLE gt_last LINES lv_cntid.
lv_cntid = lv_cntid + 1.
gs_last-cntid = lv_cntid.
INSERT gs_last INTO gt_last INDEX gv_index.
LOOP AT gt_last INTO gs_last FROM gv_index TO gv_index.
Make the new line editable
    PERFORM f9611_style.
ENDLOOP.
CALL METHOD gr_alvgrid->refresh_table_display
    EXCEPTIONS
      finished = 1
      OTHERS   = 2.
ENDFORM.                    " f9610_insert_new_line
You can ask questions doubts if any!
regards
Antony Thomas

Master Detail Form - unable to add detail row

Dear,
I have a test application that runs for years on apex.oracle.com.
Since 3rd of june 2010 I am unable to add rows on a detail form.
Any ideas?
Help is welcome!
Kind regards
Lorenz

4.0 Conversion Issue
Lorenz stated I can create the orderheader, but unable to create orderlines.Simply nothing happens, when I click the add row button.>
I share the same issue as Lorenz, on a Master/Detail form, I am able to create my Master row and but nothing happens when attempting to create detail rows. I was able to switch my application to theme 13 (Traditional Blue) from 2 (Blue and Tan) and was then able to create and add details rows.
My dilemma. When switching to theme 13 and others, none appear to support Two Level Tabs in the same manner as Theme 2. Essentially the applications look and feel is not going to go over well with my user base of 3+ years.
Is there another standard theme that will support Two Level Tabs like Theme 2 and allow the addition of detail rows on a Master/Detail form?
Is this a reported 4.0 conversion issue?
Jeff

How do I add multiple rows in Numbers for iPad?

how do I add multiple rows in Numbers for iPad?

Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn

If I add a row to my spreadsheet, how do I get the footer cell to show the last amount in the table automatically?

Balance Forward
$0.00
Date
Code
Check Number
Transaction/Description
Deposit
Withdrawl
Ending Balance
I am able to set up the Ending Balance to show the value of the cell right above it as long as I dont need anymore rows. If I add a row the value of the ending balance is stuck on the row or rows above the newly addd ones. All of my other formulas contiune on when a row is added, Is there a formula that can be added so that when a row is added the ending balance value moves to the last cell in the row?

Cobb425 wrote:
Thank you badunit for your responses and help. Jerrolds formula worked for me a little bit better for what I was looking to do. Thank you again for your help
Whatever works best for you. Jerry's formula assumed your table might not be totally full, that there might be empty rows at the bottom. Mine assumed there were no empty rows; it gave the value of the cell directly above it, as you asked. With Jerry's formula, be sure you enter your data in order by date or keep it sorted that way to ensure you get the correct "Ending Balance". If your last row does not have the most recent date, the formula will return the balance from a different row.
I don't see the advantage in Jerry's "Balance Forward" formula over the simpler one I provided.

How to add a row in Numbers

Hi,
how can I add a row above a certain row in Numbers? I'm trying to insert a row right at the top of my table.
Thanks
p.

Tap on the table to expose the selector controls. Tap on the row at the far left (on the control bar to left of the first cell. You should se a menu pop up. tap Insert. If this is done at the first row, you should have the option of selecting a body or header row.
you also might find this helpful: http://help.apple.com/numbers/ipad/2.0/

How can I add a row into a JTable with JButton

Hi all. I have the following code:
package gui;
import db.*;
import javax.swing.table.AbstractTableModel;
import java.util.ArrayList;
public class FoundersTable extends AbstractTableModel{
    private static final int COLUMNS = 8;
    private String columnNames[] = {"�� ", "��", "��", "��", "��", "��",
            "�� ", "�� , ��"};
    private ArrayList data;
    public FoundersTable(){
        data = new ArrayList();
    public int getRowCount() {
        return data.size();
    public int getColumnCount() {
        return columnNames.length;
    public String getColumnName(int colIndex) {
        return columnNames[colIndex];
    public Object getValueAt(int rowIndex, int columnIndex) {
        return ((ArrayList)data.get(rowIndex)).get(columnIndex);
    public void setValueAt(Object value, int rowIndex, int columnIndex) {
        ((ArrayList)data.get(rowIndex)).set(columnIndex, value);
        fireTableCellUpdated(rowIndex, columnIndex);
    public void addRow(ArrayList neueZeile) {
        data.add(neueZeile);
        int index = data.size() - 1;
        fireTableRowsInserted(index, index);
    public void removeRow(int index) {
        data.remove(index);
        fireTableRowsDeleted(index, index);
    public void removeAllRows() {
        data.clear();
        fireTableRowsDeleted(0, 0);
    public boolean isCellEditable(int rowIndex, int columnIndex) {
        return true;
}Now in my MainJFrame class I have one button for additing and one button for removing a selected row. How can I add/remove rows with this two buttons.
Thanks

No my question is how can I add and remove rows WITH buttons My point was the code is the same. You use the addRow(...) method. Why did you write an addRow(...) method if you aren't going to use it?
I don't understand your problem. Do you not know how to write an ActionListener?

Create row as next row on click of add another row button not on top of it

My af:table is based on a transientVO (all the attributes are transient)
This is just for data entry and not for data retrieval
So i have placed add another row button on my af:table
After i enter data in the first row and click add another row button the data is being moved to second row and the new row is created on top of that
I want the row to be created as next row . not on top of my existing row
How can we do this

would this help you:
http://lucbors.blogspot.com/2010/12/adf-11g-how-to-control-where-new-row-is.html

How to Add a Row by clicking in other different Region

Hello Im trying to build a page that allows me to add items to a region by clicking in a report region in the same page.
I created a Report Region with my information , It has a link and one image in the region 1.
in other region(REgion 2) I have a tabular form from one table,
the idea is , how to Add rows to the tabular form(REgion 2) clicking items from the reports region (Region 1)the item could be the image or the link.
I tried with Addrow javaScrip, on my image as a link or even my link, and it worked ,but it works just adding an empty row and i need to add a row with information of the report region (Region 2) for example ID_product.
so this is other question how to use Addrow javascrip , including data in the row automaticly .
Well this is what i have been trying ,I don't know if this is the correct way to do it , or if the best way.
Maybe there is another method , like ajax or something
Please any advice will be appreciated.

Hello Im trying to build a page that allows me to add items to a region by clicking in a report region in the same page.
I created a Report Region with my information , It has a link and one image in the region 1.
in other region(REgion 2) I have a tabular form from one table,
the idea is , how to Add rows to the tabular form(REgion 2) clicking items from the reports region (Region 1)the item could be the image or the link.
I tried with Addrow javaScrip, on my image as a link or even my link, and it worked ,but it works just adding an empty row and i need to add a row with information of the report region (Region 2) for example ID_product.
so this is other question how to use Addrow javascrip , including data in the row automaticly .
Well this is what i have been trying ,I don't know if this is the correct way to do it , or if the best way.
Maybe there is another method , like ajax or something
Please any advice will be appreciated.

How to add a row in internal table at first row

Hi All,
              I need to add a row in an internal table which already has some contents.I want to add this row in the first row.
Please advice.
Thanks in advance.

You mean - you want to replace the 1st record in the internal table. or you want to sum the new values to the existed record.
If you want to replace - then you can use as
read table itab index 1.
if sy-subrc = 0.
    itab-f1 = 'new value'.
    modify itab index sy-tabix.
endif.
Regards,
Satya

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

Insufficient security privilge to add a row - SunMC 3.5.1

Similar Messages

Maybe you are looking for