InsydeH20 advanced tab

dear staff,i need to power off my discreted video chard (ATI mobility radeon 5470) couse i think it is damaged. Infact when i try to install the originals manufacturers driver for the hibrid graphic sp50704.exe the screen became black (no backlight) at the Windows login page, or sometimes i get a BSOD caused by atikmpag.sys. (this seems to be not deterministic) So i want to use only the intel integrated graphic card, but if I install only the intel drivers sp51914.exe my pc became too hot without motivation and the fan start to turn very fast and noisly, and often the pc shutdown itself for these temperatures.I suppose this happens becouse the ATI vga have no drivers but is not disabled (disabling it via Windows device manager doesn't resolve the problem). For these reasons i NEED to access to my FULL BIOS with the advanced setting, to power off the ATI vga. Could you help me?Could be very helpfull to have an unlocked bios upload avable in my laptop hp page "Drivers and software", this limitation have no sense. It's impossible use my pc in this moment.Thanks in advance.

The calibration settings in the Advanced Tab is for users who want to experiment more and get more juice out for the specific camera/lens body combinations. By default, ALPC picks the optimal settings automatically, ie to balance fitting the noisy data accurately v.s. finding the simplest model that can generalize. I would only try to deviate from the default if one finds the default settings does not generate satifactory correction results.

Similar Messages

  • I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Cannot enter URL or use advanced tab when creating a (local) testing server

    Hi,
    I have created a site in Dreamweaver and I have tried creating a testing server. However everytime I try to create a test server Dreamweaver does not allow me to enter the Web URL in the server window. I knnow its local (localhost) but it seems it should still need a URL - http://localhost/...
    It allows me put in the name of the server the connection  type - Local/Network and allows me to browse to the server folder and select it but does not allow me to put any data in to Web URL: field.
    Additionally, it does not allow me to select the Advanced tab to specify my Server Model - PHP MySQL.
    When I click save with these settings I can see all the necessary files and folders in the Dreameaver Testing Server window but when I go to create a database connection I get an error saying "The URL prefix http:// for this site's testing server could not be resolved"  - on hitting the Select button to select the database.
    I am running WAMP (in Windows 7) and I can see the database in phpMyAdmin. I know the username and password are correct.
    Any help would be appreciated - Thanks

    Does this help?
    http://helpx.adobe.com/dreamweaver/kb/cant-select-some-items-site.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com/

  • Administrator cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2

    Hello, dear Colleagues.
    User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2. 
    If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below). 
    But I can change it manually with "Print Management". Features become active.
    The main purpose - to uncheck "Enable advanced printing features"  with powershell
    scripts.
    $erroractionpreference = "continue"
    $colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
    ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
    If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
    Write-host $objPrinter.Name
    Write-Host $objPrinter.RawOnly
    $objPrinter.RawOnly = "True" # Untick and update the object in WMI
    $objPrinter.Put()
    It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
    Exception calling "Put" with "0" argument(s): "Generic failure "
    At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
    + $objPrinter.Put()
    + ~~~~~~~~~~~~~~~~~
    + CategoryInfo : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : DotNetMethodException
    Can you help me with that? Look like somethings with rights.
    Thank you.

    Hello, Alan
    Morris.
    Thanks for your reply.
    I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
    I've noticed interesting thing - if to
    check "Enable advanced printing features"
    manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
    feature manually again (thru Print Management snap-in),
    and enable manually again, PS Script will work. Very strange situation.
    Thanks.

  • Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

  • Trying to share music on home network and the advanced tab does not have home sharing on it what to do?

    I was setting up sharing & was trying to click on home sharing under the advanced tab and that item was not there. What can I do?

    Hey hinge,
    I found an article that goes over 8 troubleshooting steps to take if your Home Sharing isn't working. You can check them out here:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    I'd go through each one and check to see if that resolves the issue.
    Regards,
    David

  • A big thank you to the person who said to go to edit/preferences/advance tab.  I did that but I could not find my external hard drive which is a passport.  I could not find it on my pc or control panel.  I know it it there.  Help!!!

    A big thank you to the person who said to go to edit/preferences/advanced tab.  That helped.  My external hard drive is a passport.  I know I have it ,  I just can't findit.  Not in control panel or desk top.  I don't know how they named it.  Please help!!!

    What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

  • Wat is the use of Advance tab in obiee

    hi all ,
    What is the use of advance tab , and that xml thing ..
    can any one tel me about it
    Thanks

    791907 wrote:
    hi all ,
    What is the use of advance tab , and that xml thing ..
    can any one tel me about it
    ThanksIf you actually go into the Advanced tab you will find some meaningful descriptions against everything on it.
    'That XML Thing' , its the definition of your report, criteria panel, views on the results tab.

  • Photoshop CC 2014: lost advance tab in menu Archive file info

    Hi to all.
    Recently I install Photoshop CC 2014, and I can't find the advance tab in the window "File Info" inside the Archive Menu, when I choose it.
    did we lost this tab in CC2014?
    Can I find this "advance" tab in other menu into Photoshop CC 2014?
    I appreciate any help, because there are a valid info for me inside this tab for my work.
    Thanks in advance and best wishes
    Pablo
    (sorry for my bad english  :S

    Hi JJMack, thanks for your answer 
    This missing info file tab in Photoshop CC 2014, advanced, it's very important to me because I must see a lot of images info all the day, and this tab makes my work a few easy and fast.
    All the exif data are still in the tab "raw data" but in xml format, too hard to my aged eyes   and the thousand pictures I must see in a day...
    Would be nice to include it again in the corresponding tab. Please Adobe!!!
    Thanks for your answer and for your comparative upload image between CC and CC 2014

  • When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

    When i try to download 'Get album artwork' I receive error alert with (-609) I have tried to download the artwork on the advanced tab, but still no success. My computer runs Windows 7 and the alert appears in my itunes which on my computer.Can you assist?

    Perhaps try the "Error -609" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?

    I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided.  I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
    Is it possible to change the settings in that tab with Adobe Acrobat XI?
    Regards
    Sharon

    Dear Sara
    Thank you for your reply.
    I have two printers, both support automatic duplexing.  Any PDF we receive
    or create we are unable to print double sided on our mac mini¹s.  I didn¹t
    make it clear in my question that we were fine on Windows XP, but, having
    recently changed to Mac have encountered this frustrating problem.
    I did a lot of research prior to recording the question and it appears I am
    not the only one who has come across this problem, and I have followed the
    guidelines that Adobe promote on their website to be able to print double
    sided, which doesn¹t work on the mac mini Osx Mavericks.
    Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
    to simplex  and greyed out I took that to mean that no matter what printer
    settings I make, and I think I¹ve gone through all that I can, the pdf will
    not print double sided on Mac but will on XP.
    Sorry this isn¹t the reply you must have been hoping for and look forward to
    receiving further advice in regard to this matter.
    Regards
    Sharon

  • 'Advance' tab finctionality in 'JDBC RECEIVER COMM. CH'

    Dear Experts,
        Please tell Me what is the functionality of 'MODULE' tab in receiver JDBC comm.channel.since i am getting the errorin 'Audit Log' as:
    **08.08.2011 12:12:23 Error MP: Exception caught with cause java.lang.NullPointerException**
    08.08.2011 12:12:23 Error Exception caught by adapter framework: null
    08.08.2011 12:12:23 Error Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
    when trying to connect to Non-Sap .(When i was doing Comm. ch testing)
    Please,suggest.
    Regards,
    Raj

    Hi spantaleoni,
        Here we are connecting to oracle database.Even i cross checked my adapter multiple times(*there is no error).So,pleaase suggest me what is the functionality of 'advance' tab.
    please find my adapter settings here: http://www.4shared.com/file/3w1kzJZR/JDBC_comm_ch_settings_advance_.html
    Edited by: rasmiraj tripathy on Aug 8, 2011 11:17 AM

  • In the advanced tab of languages and Region the time and date formats will not change

    For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

    You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

  • Sequence settings advanced tab

    I'm working on PAL DVCAM 16:9 in FCP 7. Looking at the advanced tab in compresson settings (within sequence settings) does anyone know if it matters whether 4:3 or 16:9 is selected. I've been working foir a while always in 16:9 and have only recently noticed the setting. Printing to tape and exporting a quicktime it doesn't seem to make a difference except that when I play a  16:9  .mov in QT player with 4:3 selected that's how it plays until I adjust then save presentation settings in QT player.  On the one hand its an 16:9 picture (anamorphic) on the other hand it's only got the same pixel count as a 4:3 frame. Don't want to discover a problem down the line that I just don't happen to have bumped into yet.

    It is just yet another way to toggle between aspect ratios.  You can also tick the anamorphic column in the browser, or choose an anamorphic easy setup.

  • How to use advanced tab in user reports?

    Hi,
    How to use "advanced" tab in user reports?
    I have two reports. I fill "Report ID" in both and then I can push "Add Report" and fill fields property.
    Then I'm can "drill" from one report to another on right click, but how to pass parameters?
    Is it even possible?
    Regard
    Libor

    Thank you for reply.
    I can't get it working.
    I have two reports:
    1. report:
    Name: test
    SQL: select 1 NUM, 'text' TEXT from dual;
    On advanced tab:
    ReportID: -null-
    Name: test2
    Report: Test2
    2. report
    Name: test2
    SQL: select :NUM from dual;
    Now, when I run the first report and click do right click on a row and select TEST2
    from popup menu, it navigates to the second report test2, but WITHOUT actual value
    from NUM column from first report.
    I'm using latest version of SQL Developer (1.1.1.25) and I like reports.
    With this feature it would be even better.
    Regards
    Libor

Maybe you are looking for

  • Help can't transfer video to IpoD!!!!!!!!

    Hi i have a problem i cant transfer video to my ipod when i drag and drop a mp4 video file to itunes nothing happens... if its a mp3 file it works few days a go it also worked with the video files but now not anymore how is this possible. And about r

  • Raising Exceptions in XSLT mapping.?

    Hi, When there is an mapping exception, in UDF, i raise an exception... Similar is the case with Java & ABAP mappings. Now, How do i raise mapping exceptions in XSLT mapping (Java & ABAP)..? --DJ

  • Correspondence Form

    Hello experts,                     Can any one tell me step by step process to modify correspondence form for AP/AR. Points will be surely assigned. Regards, Greeshma

  • Adobe Livecycle Designer 8 to import XLS file data

    Hi, I have several pdf forms using excel files with data. These excel files work as a data repository, send periodically to us by another department. We then use the pdf forms to generate the final documentation. I had them working with Designer 7, u

  • HT204268 I want to convert purchases from my AOL id to my current Apple ID.  how do I do this?

    I already have an Apple ID.  I must convert my purchases made with my AOL ID to an apple ID.  However, when I try to do so, I am only given the option to create a new Apple ID for my AOL purchases.  How do I convert my purchases made with my AOL ID t