Int between SCM and CRM

Hello SAP experts !!
I have been requested by my client to look at the integration between SCM ( APO) and CRM 7. I have looked at the SAP help files and I am familiar with CRM - however the information is not enough for me to perform a proto type that client will accept going forward
Can you assist?
Raj

Hi
The integration between SCM (APO) and CRM is mainly for AVALABILITY CHECK and AVAILABILITY with ALLOCATION scenarios. (ATP against allocation)
This SAP Note -719627 will be useful.
Regards

Similar Messages

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Optimize the performance of the RFC call between ECC and CRM

Hi,
We are planning to extract sales orders, sales activites and service orders to dispaly it on the PDF factsheet of the account.
As of now, the PDF factsheet takes a long time to retrieve the data from ECC to CRM. Can you please suggest us on ways to optimize the performance of the RFC call between ECC and CRM.
Thanks in advance,
Vamsi.

Hello,
[SAP Note 636906 |https://service.sap.com/sap/support/notes/636906]is quite useful here.
Many times, the performance is poor due to function module CRM_CCKPT_EXPORTSUMMARY. This function module gets the customer number, the sales organization and the fact sheet view. If in CRM customizing, you use complete view (001), then all the views in ERP including all the info blocks will be retrieved, which will cause performance issue.
To solve the issue, please use a limited view to retrieve the data from ERP - especially a view, which does not contain info block 013.
Hope it helps
Joaquin

Need to syncronize the Regions between ERP and CRM

Hi MW gurus,
I didn't find a adapter object to synchronize the 'Regions' between ERP and CRM. The regions are stored to the table T005S in ERP and the same table exists in CRM too.
Will any one of you adivce on how to sync. these two tables using a replication object?
Thanks,
Raj

Dear Friends,
Start initial load of object "DNL_CUST_BASIS5"
Refer:
http://www.scribd.com/doc/33952988/Download-Country-Region-V-T005S-From-R3-to-CRM-2007-06Jun2010
Thanks & Regards,
Rajagopal
Chennai - INDIA

Replication of text determination (business partner) between ERP and CRM

Hello,
in ERP I have maintained a text determination procedure Z1 and assigned it to the text object "KNA1". The textprocedure include the Text ID's "Z011" and "Z020".
In CRM exist the text object "KNA1" and "BUT000". I have customized a a text determination procedure "Z1" and the same Text ID's as in ERP, to booth text objects.
The text ID's don't be replicated, no matter i maintain it in CRM or ERP.
Can anybody tell me, how can I replicate the content of the text ID's? What is the relevant text object in CRM?
Thanks for help
Regards
Andreas

Andrea,
There are objects for replicating the data between CRM and CDB.
CRM_DNL_TTXOB and CRM_DNL_TTXID.
But none for replication between R/3 and CRM. WE need to maintain it manually.
Regards,
Aj.

RFC connexion between R3 and CRM

Hello,
I have created a RFC connexion between My R3 (HF1CLNT300) and CRM(
HF6CLNT300) using SM59..
but when i test it i have the this :
            Test connexion HF6CLNT300
Type connexion      Connexion R/3
Interr.
Do you know what does mean Interr.?
have i to install any special plug-in before doing all this?
thnx
Message was edited by:
        Mouss Blackman

Hi Abhinav,
There are multiple ways to do this. If you want to stop the overall middleware flow, you can do it in MW_MODE transction code. If you want to stop the flow for a particular system, you can do that in SMQS transaction.
Regards,
Karthi M R.

SCM and CRM Multiple Clients in one system

Dear all,
I want to ask a question regarding Multiple clients in SCM 5 - IDES and CRM 5 -IDES.
I installed the system and plan to have multiple clients in a system with copying client 800 (IDES) to others.
I heard opinion that it can't possibly be done because if during the exercise the Administrator Workbench is executed it will search to the source client (800) and probably affect the exercise.
Would you mind giving me more suggestion about this?
Thank you.
Fausto

Hi Fausto,
Could you be more specific about what you need to achive?
You can always creat a new client, logon to the client and do a client copy with TCod SCCL.
If you logon to other IDES clients then You'ld overwrite the content of the client which have been pre-configured.
Check the status of the client you need to overwrite from TCod scc4.
Also to verfiy the status of the target client for TCod se06 -system change option.
Regards,
Tolulope

Choice between BI and CRM/SRM-Technofunctional.

Hi all,
Please tell me marketwise and onsitewise which one is better between Netweaver-BI
and
CRM/SRM functional-ABAP (i.e. technofunctional with higher modules)as i am an ABAPer .
Thanks.

llll

Integration between APO and CRM Trade Promotions Mgmt

I'm looking for a clear description of how to integrate APO and CRM Trade Promotions Management.
Can anyone advise, please?

Hi Group APO,
You can follow the below link
http://help.sap.com/saphelp_scm70/helpdata/EN/45/80dd3f92c4f306e10000000a1550b0/frameset.htm
Also Check SAP note 596261 which will surely helps you
Regards
R. Senthil Mareeswaran.

Replication of Pricing Conditions between ECC and CRM

Hi All
I have a couple of queries regarding replication of pricing information between ECC_CRM. We maintain the filter settings for Pricing procedures, access sequences and condition types in the object DNL_CUST_CND_PR, and accordingly these are replicated from ECC to CRM. My Questions:
1. If some pricing procedure is created in CRM and this needs to be replicated to ECC, Can we achieve this?
2. Would DELTA be active on these objects, in the sense if some changes are made to a pricing procedure in ECC, would they flow automatically to CRM?
Thanks in advance
Best Regards,
Ram Sushanth

Hi Chandra and Swaroop
Thanks a lot for your response.
From your replies, now, this is my understanding (Pl correct me if am wrong)
1. Replication of Pricing Procedure from CRM to ECC is possible.
It would be of great help if you could elaborate on the procedure to do so or provide pointers for documentation in this regard.
Because, for replication from ECC to CRM, we perform an initial load on the object DNL_CND_CUST_PR or DNL_CUST_CNDALL.What is the object that we need to execute from replication from CRM to ECC?
2. DELTA would be active only on condition records, but not on Condition types and Pricing Procedures and if any pricing procedure is changed in ECC, we would need to perform Initial Load again.
Thanks in advance
Best Regards
Ram Sushanth

Use PI between J2EE and CRM for JCO/RFC?

Hello,
I have a question concerning the use of PI RFC-Adapter:
is it possible to use PI as an intermediator between a Netweaver J2EE System which connects to another system (eg. ABAP) using JCO/RFC (giving the following setting:
[NW Java -> JCO] -> [PI] -> [RFC-Receiver-System]
To be more specific, we plan using CRM eCommerce Shop. This Java based shop connects to CRM backend using JCO/RFC. The Java based shop needs to be placed in a different network zone than CRM system and the only (allowed) way to have a connection from the zone with the shop is through PI.
Best regards,
Manuel

Hello Rajeev,
yes, this would be the best way - but unfortunately the policy does not let us connect directly using jco/rfc. Only ways using PI (decentral advanced adapter engine) are allowed.
Is this possible to use PI to transfer the jco/rfc requests between the two network zones or does PI not support this scenario?
Regards,
Manuel

Idocs between salesforce and crm sap

hi,
I want to achieve data integration of business partner data between crm sap and salesforce using idocs.Kindly assist me in this.
awaiting response
regards
shilpi

You should do a search on the XIF IDOC adapter in the CRM general and framework forum. If you need more details on how to set this up, you can also read the documentation of the function module
CRMXIF_PARTNER_SAVE
Or look in the IMG at:
CRM -> CRM Middleware ->Exchanging data with External components ->XIF Adapter Setup
Take care,
Stephen

Data exchange between SCM and ERP

Hi Guys,
Can you please tell what all data is exchanged between ERP system and SCM system.
I am doing a project to find out the exchange of data between these systems, it would be great if u can help me out or throw a direction to find these details.
Thanks a lot guys
Regards,
Kumar
POINTS ASSURED

Hi Kumar,
Please find detailed document help link as below:
http://help.sap.com/saphelp_scm70/helpdata/en/64/08533b89050863e10000000a114084/frameset.htm
For master data following data flow occurs from ECC to APO:
u2022     Products
u2022     Locations
u2022     Classes and characteristics
u2022     Batches
u2022     Setup groups
u2022     Resources
u2022     Production Process Modes / Produtc Data structures
Transaction data flow
u2022     Sales documents
u2022     Stocks
u2022     Inspection lots
u2022     Purchase orders and requisitions
u2022     Planned orders
u2022     Maintenance orders
u2022     Project / network orders
Regards
Datta

Difference between PCUI and CRM GUI

Hi all,
We are currently on CRM 5.0 and we noticed that in the CRM GUI
you have much more possibilities(and freedom) as in the PCUI version.
Eg. In the PCUI we can relate a contactperson to only 1 company while in the
gui version this is unlimited.
Another example: If we relate a contactperson to a company in the PCUI,
the address of the company is shown together with the contact person.
If we do this in the GUI(even when explicitly choosing for the copying of the address) , there is no copying of this address.
Is this default and standard SAP?
I can understand that the PCUI offers less possibilities but I can not believe that it handles another business logic then in the GUI.
Thanks for all reactions,
Hans

Dear Frederic,
Thanks for your fast response.
I'm not at my office and i'm a total novice in CRM.
How can I see which application we use?
Us was told that there is only ONE possibility for transaction BP in the portal.
Since there are differences between the two gui's, there is now the intention to rework the gui backend(with bapi's) so that it would react the same as in the portal(PCUI).
I have 10 years of overall experience in R/3 and this seems to me the world upside down.
Another intention is to let all users work from the portal(which is not very performant)
Furthermore I've difficulty to believe that SAP would offer a product(PCUI) that handles another business logic then the backend logic which is the basis of everything.
About the business address of the contact person:
In the portal we see this address together with the contact person data.
In the GUI we don't see it on the general tab(which doesn't seem to me unlogic since you can relate the same contact person to different companies)
Thanks again,
Hans

About configuration replicate between r3 and crm

hi gurus, i want to ask you a basic question, is the situation described right:
1, some configuration should be done in r3 and should be transfered to crm;
2, some can be done in crm and should be transfered to r3;
3, some should be done in both crm and r3, but can only do it seperately and manully;
4, some can be done in just r3 or crm and need not be transfered to the other one.
and one further question is how can i know the configuration in r3 should or can be tranfered to crm? i mean, i know there is a tcode to do the transfer, but how can i identify the item is the item i should transfer?
i am not a crm consultant, the question is perhaps not to the point. but really hope you gurus give some help.
thank you.

Hi Daniel,
Let me try to answer your questions
1, some configuration should be done in r3 and should be transfered to crm;
Yes, for example pricing conditions
2, some can be done in crm and should be transfered to r3;
No, I dont think we transfer config from CRM to R/3.
3, some should be done in both crm and r3, but can only do it seperately and manully;
Yes
4, some can be done in just r3 or crm and need not be transfered to the other one
Yes
There are middleware objects which are used to download the R/3 config to CRM.I dont think there is a standard way to find out which config needs to be downloaded.
Regards,
Madhu

Int between SCM and CRM

Similar Messages

Maybe you are looking for