Integartion Builder is too slow, rather not opening at all

Experts,
could you help me resolve this. i'm not at all able to open Integration Builder. and before everything was working well.   but when i tried with three Scenarios using File and JDBC adapter. it just stopped.  and i got two Cache errors, when JDBC adapter used.
i also went through "Thread: SXI_CACHE error status "   but IB itself is not opening to refresh it.
The two cache errors says:
-Unable to refresh cache contents
-error during last attempt to refresh cache
the answers are highly appreciated.
Prema.

There are many reasons why the cache can not be updated.
1. The network is slow to display or to update the contents.
2. The system resources are runnig high in which case it will take time to refresh
3. There is some problem in the internal connections.
There might be other cases but these are the most general ones.
Though the third one is related to the first, there might be times when the network is OK but the connections have been tampered with. So it is no wrong in checking them as well...
If all these are good, then i think there should not be any problem in loading or updating the cache. Also check the user permissions.
Award if helpful,
Sarath.

Similar Messages

  • Adobe flash crashes constantly, certain pages will open, but very slow, or not open at all........never had a problem until I upgraded to new firefox 4

    when I go to open a page, it is very slow opening, or may not open at all........circle just goes around.....this is true for any site......mail, sites I have visited many times.......never had a problem until I upgraded to firefox4.......do I need to change firewall settings? If I do, how?
    Just updated adobe, it crashes more than not......

    First I already have my view set to show everything so that is not the problem.
    But I just tried opening "Computer" from the start button then type in profiles.ini in the address bar and hit enter. The profile manager opened with my profile listed. I selected it and hit start firefox and it opened as it should.
    I closed it again and tried to open it from the shortcut in my task bar and I got the Sorry window.
    But then I tried to open it from the short cut you get when you press the start button and program list and it work!
    I went back to my desk top and tried the short cut on the desk top and it worked.
    So I deleted the short cut on the task bar and created a new one and it worked.
    I rebooted the computer and tried again and the task bar shortcut works and has the right profile.
    So it seems that the problem is that the short cut was corrupted and was causing the error that caused the program to fail to open.
    I had no idea a shortcut could do that. In the past I have had short cut stop working but never do what this one did.
    I still have no idea where the profiles.ini is.

  • I used to shoot video in my Powershot S3 IS (MVI_.AVI) and load it into iPhoto, I used quicktime pro so I could convert it for emailing to family members.  That was when I was running Leopard now with Mt. Lion nothing works.  Videos do not open at all?

    I used to shoot video in my Powershot S3 IS (Format MVI_.AVI) and load them into iPhoto, I used quicktime pro so I could convert for emailing to family members.  That was when I was running Leopard now with Mt. Lion nothing works.  Videos do not open at all.  Any simple suggestions, I am not real keen on iMovie Productions and not real certain how they compress for emailing attachments.  Something simple here that I am missing?  Thanks so much.  I am a grandpa trying to share with family members far away (quickly & simply).

    I am surprised that Apple did not build a converter into Mt. Lion.
    Apple does have a converter built into Mountain Lion. It is call "Quicktime." However, in order to use this converter, you must first make sure the compression formats are playback compatible with QT. Basically, there are three levels of QT compatibility. The lowest is "Playback." These file can be played by QT but may not be conversion or edit compatible with QT. The second level is QT "Conversion" compatible. These files are playback compatible and can be converted to other compression formats using QT. "Edit" compatible media files are "Fully" compatible with QT since the can be played, converted and/or edited by QT. The main problem here is that AVI is a "legacy" file format that has not been officially supported by Microsoft for more than 11 years when it was replaced by Windows Media multimedia file/compression formats. Many of the original compression formats used in AVI files have never been transcoded for the Mac platform, use beyond system 9, or use beyond PPC platforms. In addition, some commonly used AVI codecs are proprietary or use non-standard (hybrid) profile and level combinations. In short, there is little wonder that Apple has been distancing itself from this outdated file type as it re-writes and upgrades its own QT structure to support more standardized, more scalable, more modern high definition file types and compression formats. It is really unfortunate that users continue to use this outmoded file type simply because it is freely available, easy to use, or they are simply too lazy to move on to a more modern or more efficient file types and/or compression formats.
    I tested Wondershare Video Converter Ultimate for the Mac, which seems to be the "state of the art".  I may be purchasing a new camera which might create a whole new set of variables.  This program seems to cover all bases and is great for novices.
    There are many third-party apps available if you wish to search for them. Many are even available in the App Store. Most do their job well and it is usually a matter of personal user preference as to which is best.
    HandBrake seems more suited to folks with more experience and knowledge.
    I mentioned Handbrake primarily because it is free and easy to use when you employ the included conversion presets options. (The TV options can normally be used for almost any situation depending on the source file and output requirements.) It is also excellent for more experienced users, but has a somewhat limited choice of output options as it does not access the user's system QT codec component configuration.

  • I have upgraded from firefox 4 to firefox 5 and now it crashes and will not open at all just produces an error box to submit the fault. I have submitted and now cannot use firefox at all cannot open it cannot use it cannot do anything with it.

    I wish I could go back to version 4.
    Have spent hours now .
    Upgraded to 5 and now completely useless, will not open at all please help

    I have this problem with Firefox 5.0 too. You are forced to reboot when access to 5.0 is denied. I had so many problems with 4.0 as well. I am so tired of the crashes and seeing that popup window to send your comments, it is ridiculous. I also find in 5.0 that mouse controls are fruitless and sometimes take over. The pages will jump forward or back, the pull down menus do not function, clicking boxes in online email don't work and pages will zoom in or out by themselves. I have three computers with different operating systems that this happens with. All these updates by programmers are crap. I thought I set firefox to not update automatically, since updates seem to be worse than the previous version, but it happens anyway. I will surf for an older version or switch to something else. Too bad because after 10+ years, they are losing my loyalty.

  • CS5 Dreamweaver on Windows Vista. Will not open at all. Please advise

    CS5 Dreamweaver on Windows Vista. Will not open at all. Been fine until now. No recent updates on computer, other Creative Suite software all work fine too.
    I have the Student package installation so I am unable to uninstall then re-install as one off set up. Or is it possible to get the re-installation on a student package, and if so will I have to re-install everything?
    have been using Dreamweaver only two months ago and now it is will not open. I do not get anything on the screen, no egg-timer or anything. Tried to look up online to solve problem, but no joy.
    Please advise....
    James

    When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
    http://forums.adobe.com/thread/494811
    If that doesn't help, try Restore Preferences.  Note: your work space, custom settings & 3rd party extensions will be wiped out by this.  So make backups of anything you need to keep.
    http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    If all else fails, use the CS Cleaner Tools below followed by a software re-install.
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Good luck!
    Nancy O.

  • Safari does not open at all- how to proceed?

    Safari 5.1.5 will not open at all - the dropdown menus are greyed out.  My OS is Lion 10.7.3 - (iMac)  I cannot download and install an earlier version and Mac won't let me get rid of Safari 5.1.5.  Does anyone have any suggestions?
    Nola3

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Ipad4 not open at all

    ipad  not open at all

    abeerfromcairo wrote:
    ipad  not open at all
    Ok.
    Can you give us more details on your issue?  As it stands your question is too vague, to provide any trouble shooting tips.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • My itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

    my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible

    i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
    I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!!

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • Itunes will not open at all

    hey guys,
    ever since I've reinstalled my pc with windows xp pro sp3, my itunes will not open at all.
    every time i click on itunes.exe it does not do anything. It does give me the hourglass icon as if my pc is working on it. but then it disappears without any itunes response.
    to fix this issue, I have tried any possible method that i could find on the internet. even called the support center but they were not able to help me either.
    I have tried to reinstall itunes *(no effect)*
    did something with the cryptographic something in the administrative tools menu *(no effect)*
    I have deleted the itunes installer cache *(no effect)*
    I installed any older versions,( btw 7 does not work either)but after updating it *(no effect)*
    itunes 6 does work; but since i have an iphone it is completely useless for me. so *(no effect)*
    the strange thing is that itunes.exe does appear in the "processes" tab in task manager, but it does not show in the "applications" tab.
    and every time I shut down my pc, I get the windows message that itunes is shutting down.
    If you have any other suggestions, please be so kind help me.
    this is driving me nuts. It's been going on for two months now.
    Kind regards,
    Bart
    Message was edited by: Pleinvrees

    Pleinvrees
    I am not sure if I have this right from all those posts.
    When you try to start iTunes, there is no error message and you can see iTunes.exe persisting on the processes tab of the task manager.
    If that is your probelm it is commonly do to a problem with cryptographic services.
    Before looking into that there is a quick thing to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    If that's not it, work carefully through *method 4* in the following article:
    http://support.microsoft.com/kb/822798
    Make a careful note of any error messages you get, this is important. post back the names of any dlls mentioned in error messages.
    If you don't get any error messages try starting iTunes.

  • I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

    I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I've used FF for years, today it will not open at all on same computer can't sign in bec when I registered Mozilla didn't send me confirmation email I used it on this am.

    I added a few add-ons yesterday to FF (I'm on current version). No problem. FF opened normally today until I added a new "user" to my laptop. After that, FF does not open at all, even from my original user account, which is the administrator. I don't think it was the add-ons, but I'm not sure. I deleted the new user account, turned the computer off/on again, rebooted (numerous times) and still FF will not open for me. The FF file is still in the computer (program list), and I still have the icons and it's in the tray. I have a Dell Studio, only 1-1/2 years old, use FF exclusively as my default browser.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • I've just updated firefox and now it will not open at all. Please help!

    I use gmail and a couple of days ago I started having trouble accessing it and in fact any google related site. Apparently my version of firefox was not supported so I updated to the current version this morning but then found that firefox would not open at all. There are no error messages. I have tried restoring my settings to those of yesterday but although my system says I have returned to the old version 3.5.15 it still will not open. I can now only access the internet by using an ancient version of Microsoft Internet Explorer - which is also not supported by gmail. Although I'm limping on I could really do with some help!!

    Perhaps give one of the following documents a try: 
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues

  • I upgraded from 3.6.13 to Beta 4.0 and now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing.

    I uninstalled Beta 4 and re-installed 3.6.13 now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing, I have been using Firefox for a long time but cannot resolve this problem can anyone help and give me a solution please. As I use Firefox as my web browser it is very frustrating.
    The fact it will not uninstall appears to be something completely new as nobody I know who uses Firefox has ever encountered this in the past.

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
    If necessary then also see:
    * http://kb.mozillazine.org/Browser_will_not_start_up
    * http://kb.mozillazine.org/Error_loading_websites

Maybe you are looking for