Integartion of Lotus Mail server and Oracle

Need to know about integration between Lotus mail server (R5) and Apps server can be worked out.
Also, we would like to know how we can integrate Oracle Alerts with Lotus R5 server.

Check the mail client account setup per this Microsoft discussion; basically, if you're not already doing so, use the "Other" choice when setting up the client account within this client.

Similar Messages

Web host, mail server and FTP.

Dear all:
I have some questions and will try to make my post a short one (although the questions aren't exactly simple). I have the need to set up my own web server, e-mail server and FTP server. It is my understanding (and I remember setting another computer I had 2 or 3 years ago this way) that OS X can be used for this without the need to have OS X server installed. I don't need (at least not for the for the immediate future) to have a server for my own local network. Basically all I need is a single computer where (1) I can host multiple web sites, (2) I can host my own e-mail that will correspond in number to the number of web sites (domain names) being hosted and (3) I can set-up as a FTP server so that my clients can log on and download files.
I have used VirtualHostX for virtual hosting as well as PureFTD Manager with good results in the past. I've also found both to be easy to use, with a good and intuitive GUI which is essential for someone with as little knowledge as I have of networking. My question now as to do with e-mail and how to set-up Mac OS X to work as an e-mail server.
Are there any applications you would suggest that would be simple to use, have a simple and intuitive user interface and also provide mailing list services along with e-mail services that you would recommend ? I've looked at a few but most of the ones I have found seem to require command line input and this is something I am not comfortable with. I need an application with a simple interface and allows things to be set-up in a straight forward manner (and preferably free instead of paid).
What would be your recommendations for this project ? Any recommendations, advice and suggestions you can offer will be very appreciated.
Thank you in advance,
Joseph

Perhaps you should give people more time to answer.
1. You do not need a DNS on your server, ask the ISP to set up the MX record as they set up the A record.
2. Not really enough information in your setup to say either way, but as it takes seconds to do and you have everything else needed - set it up anyway.
3. Domain name: mydomain.com, Host name depends what you call it. If you don't have a name why not mail.mydomain.com and make you mx record point to that name. Perhaps that is what your A record is already.

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

Hello,
I use Entity Framework code first approach.
My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
But, Is this possible to access SQL Server and Oracle in the same project.
Thanks,
Murugan

This should be possible with a Code-First workflow. In Code-First the database mapping layer is generated at runtime.
David
David http://blogs.msdn.com/b/dbrowne/

Different output of same query in SQL Server and Oracle

I have two tables table1 and table2
--table1 has two columns c1 int and c2 varchar. there are not constraints added in it. it has data as given below
c1     c2
6     d
5     j
102     g
4     g
103     f
3     h
501     j
1     g
601     n
2     m
--table2 has only one column c1 int. there are not constraints added in it. it has data as given below
c1
6
1
4
3
2
now when i run below given query in sql server and oracle it gives me different result
select *
from table1
     inner join (SELECT ROW_NUMBER() OVER (order by c1 ASC) AS c1 from table2) table2 on table2.c1=table1.c1
sql server output
c1     c2     c1
1     g     1
2     m     2
3     h     3
4     g     4
5     j     5
oracle output
C1 C2 C1
5 j 5
4 g 4
3 h 3
1 g 1
2 m 2
If you notice the first column in both output. It is sorted in sql server and not in oracle.
Why it is behaving differently in oracle? Is there any way I can solve this in oracle?
Thanks,
Jigs

It is NOT behaving "differently" in Oracle; you just haven't specified an order that you expect your results to be in, so you're going to get output in whatever order the database fancies displaying it (ie. no guarenteed order). This is an artifact of how the database chooses to put together the data, and different databases (or even datasets within the same database) can and most likely will behave differently.
Even SQL Server won't guarentee to always get your data in an ordered fashion if you exclude the order by clause, even if you think it has always output the data in an ordered fashion.
Your solution is to add an order by clause, in BOTH databases, to force the order of the output data.

I have AOL as my mail-server and any photo I am trying to attach and send will not open no matter what I try.It say that the format the attachment is not recognised.d.

I have AOL as my mail-server and any photo that I am trying to attach will not open.The photos are in iPhoto and the message say that the format is not being recognized.AOL delivers the photos but they cant be open.

Where exactly did you buy the "new iPhone "
A country might help as well .This is a WW forum
Are Direct Mobiles an Approved Apple iPhone reseller if not it may well be a fake

HT201320 What am i supposed to put as the incoming mail server and the outgoing mail server when setting up my email?

I'm tryingt to set up my email through my school account and i'm not sure what it means when i'm asked to enter a incoming mail server and an outgoing mail server. Help would be appreciated thanks

Since no one here has any idea about what type of mail your school offers...you don't mention what school...your question, as asked, can't be answered. What don't you contact your school's IT dept., or look online. Most schools have instructions on how to do so online.

NVARCHAR - NVARCHAR2 datatype mapping between sql server and oracle.

Question regarding size allocation that occurs for NVARCHAR columns in sql server to NVARCHAR2 in Oracle in the migration tool.
The migration tool has converted NVARCHAR columns to be twice their size as NVARCH2 in Oracle. Example, a table whose column is mycol NVARCHAR(40) gets migrated as mycol NVARCHAR2(80).
In SQL Server land, the designation of a column as NVARCHAR(40) will physically store the column as 80 bytes. However, as I understand from this excerpt (taken from here: http://www.oracle.com/technology/oramag/oracle/03-nov/o63tech_glob.html), that Oracle in essence will do the same thing for NVARCHAR2:
To make it easy to allocate proper storage for Unicode values, Oracle9i Database introduced character semantics. You can now use a declaration such as VARCHAR2(3 CHAR), and Oracle will set aside the correct number of bytes to accommodate three characters in the underlying character set. In the case of AL32UTF8, Oracle will allocate 12 bytes, because the maximum length of a UTF-8 character encoding is four bytes (3 characters * 4 bytes/character = 12 bytes). On the other hand, if you're using AL16UTF16, in which case your declaration would be NVARCHAR2(3), Oracle allocates just six bytes (3 characters * 2 bytes/character = 6 bytes). One difference worth noting is that for UTF-8, a declaration using character semantics allows enough room for surrogate characters, whereas for UTF-16 that is not the case. A declaration such as NVARCHAR2(3) provides room for three UTF-16 code units, but a single supplementary character may consume two of those code units.
As I read this, NVARCHAR(40) in sql server should be equivalent to NVARCHAR2(40) in Oracle and not NVARCHAR2(80) as it gets translated to - am I missing something? We have a rather large database to migrate so I need to get this size allocation right (and I obviously don't want to truncate any data).
Thanks -

Right - well, that's what I'm suggesting is that NVARCHAR(8) in SQL Server is equivalent to NVARCHAR2(8) in Oracle. Truncation will occur after 8 of any character, including, say, double byte Kanjii characters, which would physically store 16 bytes in the NVARCHAR(8) NVARCHAR2(8) column defn. I tried that in both SQL Server and Oracle, and the behavior is the same.
Also, technically, NVARCHAR2(8) and VARCHAR2(8 CHAR) is roughly the same in terms of behavior, except that in the first case, the physical storage is 16 bytes, while in the second case, it's 24 bytes (to account for 'supplemental' characters or true UTF-8 compliance). Same truncation occurs after 8 of -any- character be it single byte ascii or double byte kanjii, which is the behavior I expect.
Thanks for looking into this. What I decided to do was the following:
What was originally defined in SQL Server as varchar (and translated to VARCHAR2 with the CHAR designation), I removed the CHAR designation since I truly want that number of bytes to be stored, and not characters (for columns I do not care about UTF8 or 16 compliance - that will also mimic the same behavior I currently have on the SQL Server side. For anything that was nvarchar in SQL Server, I went ahead and created them as VARCHAR2 with the CHAR designation, with the same size (not double the value as was in SQL Server which the documentation says it gets translated to). I did this since we probably will need true UTF-8 compliance down the line, and since I had the hood open, it was easy enough to do. I could also have converted NVARCHAR(n) to NVARCHAR2(n) (and not n*2) as what was happening in the migration.
I tested strings in both cases, and I think I have my solution.
Edited by: kpw on Sep 24, 2008 11:21 AM

Compare SQL Server and Oracle syntax

Hello, I am very new to the Oracle DB as I have been working with MS SQL Server for many years. I have a SQL statement that works fine in MSSQL but seems to not work in Oracle. Is this a syntax problem or do I need to look elsewhere?
DECLARE @as_master_key varchar(26)
EXEC [dbo].[GET_UNIQUE_MASTER_KEY]
     @as_project_name = N'CMDEMO',
     @as_database_site = N'CMPL',
     @as_user_initials = N'SK',
     @as_table = N'SUBMITTAL_CATEGORY',
     @as_master_key =
     @as_master_key
OUTPUT SELECT @as_master_key as N'master_key'
This is what I use in MSSQL and it works fine - but I am porting this application to an Oracle backend and it fails. Any suggestions?
Thanks in advance to this newbie. :)

SQL Server and Oracle are two completely different RDBMS'.
You'd be best not to try and port SQL Server code to Oracle SQL or PL/SQL directly as it will not favour the power of Oracle's features correctly.
I'm not sure what your code is supposed to be doing (I find SQL Server code awful to read, and never understand the need for "@" before variable names, that just seems to show a lazy parser (or lazy coder who designed the parser)).
From what I can guess it's going to be something like...
SQL code...
create or replace sequence my_master_key;PL/SQL code...
DECLARE
as_master_key number;
as_project_name varchar2(20) := 'CMDEMO';
as_database_site varchar2(20) := 'CMPL';
as_user_initials varckar2(5) := 'SK';
as_table varchar2(30) := 'SUBMITTAL_CATEGORY';
BEGIN
select my_master_key.nextval
into as_master_key
from dual;
-- In 11g you could replace this select with just:
-- as_master_key = my_master_key.nextval;
END;This get's a unique sequence value into a variable and declares all the other variables. What you want to do with them after that I don't know.

Database independant ETL in ODI for SQL Server and Oracle

Hi,
We have a requirement to create ETL which can be run for both SQL Server and Oracle.
We have some tables to be filled from operational database to data warehouse using business requirement.Our goal is to create code which should be database independant.
We will provide all DB details at the start of execution and it will code for as per provided details.
The same can be achieved by Talend.
I wanted to know if same can be achieved in ODI.
Any pointers regarding this would be helpful.
Thanks,
Mahesh

A quick trick: Provide one more value at the start of execution. It is something like a flag. For example db_flag. It can be either 'O' or 'S'.
Open both oracle and sql server KM. Copy one of the KM code to other KM and put an if condition to check the flag.
if (#DB_FLAG.equalsTo("O")){
Oracle code goes here...........
}else{
SQL Server code goes here...........
Its a pure KM customization.
Bhabani
http://dwteam.in

Connection between oracle 9i server and oracle 9i client

hi there,
i have installed both oracle 9i server and oracle 9i client in my system.how can i connect these two to have connection between these server and client?
Because i was using only 9i server for creating database and for other purposes.i have not used 9i client yet.
Please write me the answer.
Thanks in advance.

Hi Balu,
If you have the Oracle 9i Client, you can just edit your TNSNAMES.ora file of your client to have a TNS Entry for your new Database & try connecting it. You just need to try TNSPING & ensure that you can reach the Listener.
Are you facing any specific problems ?
Regards,
Sandeep

HT201320 What is incoming and outgoing mail server and server port number

What is incoming and outgoing mail server and server port number

See applenerd504 previous reply:
These specifications that allow you to send and receive messages on your iPhone. If you are using iCloud Mail, Gmail, or another service listed in the selector in settings, they should be automatically configured. If not, you may need to look up certain numbers for your email service.
Putting it in slightly different terms:
If you are using a web-mail system like gmail (with a gmail email address) all the mail sending, receiving and management is done on Google servers. In these cases you will only need to have a working internet connection to be able to log in to the service to access its data.
Supplying mail sever names and port numbers should only be needed if you are using a traditional (non-web) email account where you are accessing the mail servers directly. This would be typical for a email account set up by someone like your ISP (Internet Service Provider), in these cases you will have to ask them for the appropriate settings.

Trying to add my thunderbird work email account to my new iphone, how do I find my "incoming mail server" and "outgoing mail server" host names?

Got a new Iphone 6 and I need to add my work thunderbird email account onto the phone. It is asking me for the host name of my incoming and outgoing mail server and I have no idea what this means- please help!

First off there is no such thing as a Thunderbird email account. Email providers issue email accounts and Thunderbird is email client software and not a provider.
You can look at the server settings in Thunderbird to see the settings it is using or you could get a list from your provider.
In Thunderbird go to the menu bar and select Tools-Account Settings-Server Settings to see the Inbound settings and Tools-Server Settings-Outbging Server(SMTP) for Outbound settings.
No menu bar with Tools showing? Press the alt key.

If I move a mailbox from my imap account to "on my mac" can I safely delete the folder from the mail server and still be able to read the messages?

If I move a mailbox from my imap account to "on my mac" can I safely delete the folder from the mail server and still be able to read the messages?

You certainly can.
Be aware that the emails you move to local storage ("on my Mac") will be the only copies that remain.

DSNless connection to SQL Server and Oracle

hi,
how can i connect to SQl Server and Oracle without specifying the DSN.
zulfgi

My favorite reply again:
Someone wrote in a newsgroup about configuring some kind of "temporary DSN".
His example was for Excel, but it will maybe work the same way for other drivers:
db = DriverManager.getConnection(
"jdbc:odbc:Driver={Microsoft Excel Driver (*.xls)};DBQ=c:/temp/test2.xls;DriverID=22;READONLY=false","","");
Also someone else suggested for SQLServer:
db = DriverManager.getConnection("jdbc:odbc:Driver={SQL Server};Server=MyServerName;Database=MyDataBase","","");
Find out the right driver clause for Oracle; look at the names the control panel ODBC manager shows.
Regards,
Hartmut

Integartion of Lotus Mail server and Oracle

Similar Messages

Maybe you are looking for