Integartion with ERP and SRM

Hi,
We are looking for integration of E-sourcing 6.0 with ERP 4.6C and SRM 3.0 with Extended classic scenarion.
Is it possible to do the integration, if not can you suggest how the above scenario can be acheived?
Is it possible to integrate the MDM 2.0?
Regards,
Madhan

Integration between ESO and SRM is a custom solution with help from SAP. We have implemented this recently.  However Intergration between ESO and ECC is standard.
Please reach out to SAP for further assistance.
Good Luck

Similar Messages

  • Integration with ERP and other systems

    We have integrated iP Oracle with OEX and we are now trying to
    integrate with BBP/SAP, Maconomy Procurement systems. Has anyone
    tried to integrate OEX with other systems?

    We are now running a project to integrate OEX with SAP R/3 4.6c (MM Module). Oracle recommendation includes semiautomatic process associated to the RFQ in SAP and P.O. placement in SAP.
    This semiautomatic process is consequence of poor XML integration with some transaction on OEX in which the buyer needs to operate in both systems: SAP and OEX. Nevertheless we are trying to request the incorporation of this changes in OEX's new version.
    Its a matter of time that ORACLE will understand that a full integration is needed to satisfy users; SAP has done it and most of ERP transactions can be taken to XML format through their product Business Connector (Original a Webmethods product bought by SAP).
    Juan Carlos Blesa

  • Queue with CRM and SRM

    Hello all,
    landscape is R/3 4.7, EBP and CRM
    Problem that I have is that EBP is receiving CRM loads from R/3.
    Users in R/3 for EBP and CRM are separate, Q prefix is different, and in inbound queue of EBP I can still see loads from R/3 which are for CRM (they are going to CRM also).
    Is there any way to distinguish receiver of R/3 adapter to receive in EBP only loads for EBP?
    TIA
    Gordan

    Hi Gordan,
      I think the problem is with the table CRMCONSUM in  both the systems...See whetehr the entry has been maintained in this table for SRM as the User/COnsumer in both the systems.
      Hope this helps.
    BR,
    Disha.
    Do reward points for helpful answers.

  • SAP ERP and Cloud(C4C)

    Dear Experts,
        Currently iam facing error is to develop the integartion between ERP and Cloud(C4C) system (SAP ERP->PI->Cloud(C4C))
    We have installed all the standard tpz packages in ESR & done respective connection settings also.Now iam facing the below error while PI
    communicating to C4C,is there any specific connection settings need to do in C4C or PI side let me know.
    Receiver SOAP channel:
    1.Target Url- provided
    2.Username & pwd-provided
    3.Keystore Entry -provided
    4.Keystore view-Provided
    Apart from this anyother details need to provide or in C4C side.
    Best Regards,
    Monikandan

    Still facing to connect C4C,for webservie in receiver end we need to do any endpoint settings in SOA Manager in PI.
    Kindly explain about it.
    Best Regards,
    Monikandan.

  • External requirements from ERP to SRM with ExtendedClassic scenario for PPS

    Hi all,
    We are having SRM 7.01 system with ERP ehp4, and we have to do PPS ( Public sector Procurement) as part of our implementation,for that we need to activate Extended classic Scenario.
    My question is whether we can have external requirements ( Material PR and Service PR) from ERP can be processed in the srm system.
    Please help.
    Regards,
    Raju

    Hi
    We can use either the CPPR functionality which requires PI/XI to be in place or maintaining the T160PR and T160EX tables in ECC and running the report BBP_EXTREQ_TRANSFER to push the PR's into SRM. In SRM we have to maintain the entry channel to bring the PR's into SOCO.
    R/ Reddy.

  • SRM 7.0 EHP1 integartion with ECC

    HI,
    We are currently using EHP4 of ECC and upgraded our SRM system from 5.0 to EHP1.
    What is the min version reqt for integration SRM 7.0 EHP1 with ECC??
    I read somehere that SRM 7.0 EHP1 cannot be integarted with ECC lower than EHP5?can someone confirm?

    Hi Ricardo,
    Thanks for the response!
    It is recommended to have SRM 7.01 with ECC EHP4 (at least) to get the maximum advantage of integration part of SRM and ECC system. With these combination, you can create central contract via ESOA services and distribute the contract to R/3 backend system.
    -->By SRM 7.0 .1 do you mean SRM 7.0 EHP1?
    Can you also confirm if all features of ECC EHP4 are part of EHP5?(EHP4 is subset of EHP5)
    We are currently on  SRM 7.0 and are planning to upgrade to EHP1.However on the ECC side,we have all business functions needed in both EHP4 and EHP5.Considering this,would it be advisable to anyways upgrade SRM to EHP1?
    Also by upgrading to EHP1,my undesratanding is that we only activate the scenario specific switches in the system..is that true?
    Please advise.

  • Sending PO with attachment from SRM to ERP

    Hi Experts,
    My requirement is to Send PO with attachment from SRM to ERP.
    I can get the attachment in the payload as mentioned in https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3509. [original link is broken] [original link is broken] [original link is broken]
    But how to post this attachment into the target ERP system so that it gets saved as an attachment in the Purchase Order.
    Thanks & Regards,
    Shobhit

    Hi Shobhit,
    I asume, the PO is send as an IDOC to ERP?
    In this case, you have no chance to attach the attachment.
    A wortkaoud would be to extract the needed date from the attachment and map the values into correcponding fields of the PO-Idoc.
    Regards Mario

  • Install  ERP ECC 6.0 with EHP4 and JAVA stack (usage type)

    Hi all,
    I need to install ECC with EHP4 and also JAVA stack.
    I know that I have to install 2 stacks with different SID and oracle homes, firts I have to install ABAP stack and then the JAVA stack, but wich usage type should I choose for JAVA STACK?
    What I would like to have in my new installation would be the same usage type for JAVA stack like ERP 6.0 SR3 ABAP+JAVA stacks.
    What should I choose?
    Regards
    Thanks

    Hello,
    SAP ECC 6.0 allows ABAP and JAVA but EHP4 this feature is not.
    One thing I can suggest if you install ABAP stack first, it will initiates (even different SIDu2019s) the JAVA stack also.
    So JAVA stack having a protection with ABAP, because you know JAVA stack is a very sensitive and time consuming one when you want to start are stop.
    So you can do this sequence
    Suresh

  • Clariffications in MM SUS Scenario with ECC 6.0 backend and SRM 5.0

    Dear Team,
    We are implementing MM SUS Scenario with ECC 6.0 backend and SRM 5.0
    We need to following clarifications
    1 Once we create ASN in SUS, how to cancel the ASN. We are not able to see cancel button for ASNs
    2 When we create GRN in ECC against the inbound delivery and perform Return Delivery, this Return Delivery is getting updated in SUS. But the ASN status is not changing to canceled. We are not able to perform new ASN for this. Also invoice is being allowed for these ASNs. How to control the same.
    Request your inputs please
    Regards,
    Ravi

    HI can you tell me how you get it solve?
    thanks in advance.

  • Install SAP ERP 6.0 with Linux and Oracle RAC

    Hi Guru,
    I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
    Where do I find information?
    Thanks,
    Hugo.

    Hello Hugo,
    You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
    14. Data Guard
        o  You can use "Physical Standby".
        o  You cannot use "Logical Standby".
        o  You can use Data Guard Broker.
        o  You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
        o  In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
        o  Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    60. Real Application Cluster (RAC)
        o  You can use this feature in accordance with Note 527843.
    Regards,
    Eduardo Rezende

  • Supplier Qualification with ERP

    Dear experts,
    I've set up the supplier qualification process. So fas so good.
    I'm able to accept a supplier in "Supplier Preselection"
    I want to transfer this supplier to the ECC system next but the transaction to do so is not there.
    I have assigned the Role: /SAPSRM/SUS_ROS_PROCESSOR to my user and I can only see the transaction Pre-Select Supplier
    According to the documentation the following transactions should be included to the workset for this role:
    Transfer Supplier
    Preselect Suppliers
    Supplier Monitor
    But I can not see the transactions Transfer Supplier and Supplier Monitor.
    Am I missing something?

    Hello Nikhil,
    Thanks for your reply.
    The Strategic Purchaser role is also assigned.
    I may be wrong but isn't the scenario you are describing Supplier Qualification with SRM server?
    Look at the following link. There you can see a second scenario called Supplier Qualification with ERP.
    http://help.sap.com/saphelp_srm70/helpdata/en/45/efc057348a3112e10000000a1553f7/content.htm
    THat scenario describes a process where you can transfer the supplier manually to the ERP system through XI.
    Indeed there is a new functionality in EhP1 to automatically transfer the accepted supplier to ECC.
    Also check http://help.sap.com/saphelp_srm70/helpdata/en/f4/1b962bda07450b9076bb66a7d42fa7/frameset.htm
    Here you can see the worksets for this role.
    I'm a bit confused and hope you can help me out.
    Kind regards

  • Compatibility between ECC 6.0 EHP4/NW 7.01 and SRM 5.0

    We have ECC 6.0 SPS 03 and SRM 5.0 System with the dual stack. We are planning to upgrade ECC 6.0 only to EHP4 SPS08. Will it lead to any compatbility issues with SRM 5.0? are there any dependencies? I
    have checked the Upgrade dependency tool and it did not find any dependency. I am not able to find out any note which explain impact of upgrading ECC to EHP with SRM.  Any help will be appreciated.

    Hi,
    I don't see any problem in having SRM 5.0 with ERP 6.0 EHP4/NW 7.01. You can have a look at SAP note 963000 which shows that SRM 5.0 is released with this release also. So, I think SRM 5.0 is fine with EHP4.
    Thanks
    Sunny

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • How is the integration with ECC in SRM 7.0??

    Hi,
    Working with SRM 5.0 or 5.5  the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts,  we only use the RFC´s and the abap programs.
    Is the same behavior with SRM 7.0?????
    Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
    Thanks

    SRM70 is closely integrated with XI for transferring docs between ECC and SRM.  SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
    Thanks,
    Jagadish

  • Middleware on CRM 7.0 for ERP and CRM sales integration

    Hi all,
    i am involved in a CRM upgrade project in order to repleace the client current release with CRM 7.0.
    currently, my client handles sales integration between ERP and CRM using middleware fucntion and in particular SCENARIO A that allows to create sales orders both in the CRM system and in the R/3 system and to change them mutually in both systems.
    my question is: new release 7.0 covers all those included functionalities by default without implementing this scenario? If yes, how and what exactly.
    thank you in advance and i am looking forward your feed-back
    cheers, lucia

    Hi Christophe
    this can be done. You can call MDM web services for either doing a Free form search or even run a MDM matching strategy to find potential duplicates defined based on rules in MDM.
    In one of our projects we have used Web services call from CRM ecommerce portal to MDM for doing a Customer search.
    Thanks-Ravi

Maybe you are looking for