Integrate cProjects with Microsoft Project server
Dear all,
Does anyone know how to integrate cProjects 4.0 with Microsoft Project server 2003 in details? Pls kindly help.
Thanks and best regards
Trung
Hi Murali,
Do you have any documents showing how to configure cProjects step by step to integrate with Microsoft Project server? Pls help.
Hi Niranjan,
Pls check your email.
Thanks and best regards,
Trung
Similar Messages
-
Integration of cproject with microsoft project 2003
dear all,
i want to integrate cproject with microsoft project 2003.
can u send me documents related this. what are settings required for this.
my email id: <b>[email protected]</b>
thanks
amitHi Amit,
Can you share DOCUMENT with me
my mail id [email protected]
thanks
sunil -
UCM certified with Microsoft Exchange Server ??
Hi,
Is UCM certified with Microsoft Exchange Server ? how can we integrate UCM with Microsoft Exchange Server as we have Desktop Integration Suite to integrate with MS Outlook..
Thanks,
NLAs for the link to the manual, for 10g it's here (I believe for 11g it will be similar if not the same): http://download.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/admin/managing_system_10en.pdf
It also mentions that SMTP protocol is used. Therefore, you will need to know the SMTP address of your Exchange Server.
As for who uses it, I believe it is the majority or at least a significant part of the clients' installed base. Note that it is one of the most widespread email servers. -
CRM and Microsoft Project Server Integration
Hello,
Can anyone explain what solutions are available that can help in integrating SAP CRM with Microsoft Project Server? Is there any documentation available on this? Thanks.Hello Roberto,
E-Mail rerouting is possible with an Exchange server. We use an adress [email protected] provided from the Exchangeserver. The mail is then forwarded to [email protected] to be retrieved by our CRM System for further processing. Please ask your Exchange admin again. I think he has to get wome more information about configuration possibilities.
Regards
Gregor -
Is there any way to Integrate Sap b1 with microsoft project
Hi,
I would like to do add-on Project Management.
Before that I would like to get some idea from you experts
Is there anyway to integrate SAP B1 with Microsoft Project.
I appreciate your help, and desperately need your help.
Thanks in advance
Regards
ParthibanHi,
It all depends of what you want to accomplish, but both MS Project and SAP B1 have SDK's so yes, it's possible to integrate both the applications.
MS Project SDK Documentation
Regards,
Vítor -
Integrate Portal With Microsoft ADS
Hi,
I need to Integrate portal with Microsoft Active Directory service, so that users can login with into Portal with ADS Authentication.
What are the required for Configure EP To ADS.
i have the LDAP Service User Account.Other than this what i required to configure.
Please provide me the steps need to configure,
Thanks
Subbarao ChintaThe links above should help you do the basic configuration for Portal and ADS integration.
In addition to the links above -
If you are planning to create users (with passwords), configure LDAPS. This can be done by using Certificate Authority on the ADS server and importing the root certificate to the Portal server. I would also make sure the security policies on both servers match. The default port is 636.
Otherwise, the default port is 389.
If you plan to read other custom attributes from LDAP, modify the datasource configuration file.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/7d188751626fb5e10000000a155369/content.htm
If you want to create LDAP accounts with different account properties, modify the ume.ldap attributes in the com.sap.security.core property sheet in Config Tool. -
Microsoft Project Server Event/Queue Services has been disable
Hi after update Service pack 2 and December 2013 CU,Microsoft Project Server Event/Queue Services has been disable . I have manually change and start but after some time again same thing happen.
Kinldy let me know the process hwo to resolve this issue.
I have fallow the below link but this is not impactable on my envirnment.
http://blogs.technet.com/b/projectsupport/archive/2012/12/26/project-server-2010-my-queue-service-keeps-getting-disabled.aspx
Help is appricable.
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| TwitterHi Muelder,
Yes share point Project Appl service is enabled.
Now i have resolved issue with the help of below script.
((Get-SPFarm).Services | ? {$_.Name -match "ProjectQueueService14"}).Instances | % {$_.Id} | Stop-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectEventService14"}).Instances | % {$_.Id} | Stop-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectQueueService14"}).Instances | % {$_.Id} | Start-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectEventService14"}).Instances | % {$_.Id} | Start-SPServiceInstance -Confirm:$false -Verbose;
((Get-SPFarm).Services | ? {$_.Name -match "ProjectQueueService14"}).Instances | ft -AutoSize
((Get-SPFarm).Services | ? {$_.Name -match "ProjectEventService14"}).Instances | ft -AutoSize
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter -
Microsoft Project Server Online
I need to know Microsoft Project Server Online fees/user and
if we have a discount as we are a gold Microsoft partner or for free, please advise?Hi,
We can use the Microsoft Project Server 2013 trial version with below link:
http://office.microsoft.com/en-us/project/project-server-2013-project-portfolio-management-software-FX103802061.aspx
As far as I know, Microsoft has different business policy in different states and here is a technical forum. Thus, I recommend we connect the Customer Service Center or local provider.
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Thanks for your understanding.
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
Oracle HRMS Integration with Microsoft Exchange Server 2007
I would like to know if it is possible to integrate Oracle HRMS 11.5.10.x with Microsoft Exchange Server 2007 using Microsoft Identity Lifecycle Management (ILM) 2007?
Has anyone ever come across something like this and successfully achieved it? Does anyone know of a step-by-step guide (or forum discussion) to achieve this?
Response(s) will be highly appreciated.hi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N -
Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010
Hi,
We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
We do not have any VCS in the setup.
If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
Regards,
RNHi,
so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
here is m config:
vrf definition Mgmt-intf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
voice vrf Mgmt-intf
voice service voip
no ip address trusted authenticate
address-hiding
media disable-detailed-stats
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
bind control source-interface GigabitEthernet0
bind media source-interface GigabitEthernet0
listen-port non-secure 5066
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class codec 2
codec preference 1 ilbc
codec preference 2 g722-64
codec preference 3 g711alaw
codec preference 4 g711ulaw
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 172.16.1.164 255.255.255.0
negotiation auto
dial-peer voice 15 voip
tone ringback alert-no-PI
numbering-type unknown
preference 1
destination-pattern 4.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.2.207:5068
session transport tcp
voice-class codec 2
dtmf-relay rtp-nte
dial-peer voice 17 voip
numbering-type unknown
preference 1
destination-pattern 7.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.1.32:5060
session transport udp
voice-class codec 2
dtmf-relay rtp-nte
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:172.16.2.207:5068 tcp
172.16.1.32 - Asterisk with a extensions on it.
172.16.2.207 - Lync 2013 mediation server with other extension on it
i can call from Asterisk extension via router and to Lync extension.
i cannot call from Lync to Asterisk.
TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
strange. lync person seems to configured everything correctly
any thoughts? -
MCTS 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012
I am searching for training kit for Exam 70-466 (Implementing Data Models and Reports with Microsoft SQL Server 2012) but I think is not published yet. I was expecting its release in Jan or Feb 2014. Would any one can tell me its release date or any place
where I can find this book.
Thanks
Hi Azhar lqbal Gondal,
According to your description, since the issue regards training and certification,
I suggest you post the question in the Learning forums at
http://social.technet.microsoft.com/Forums/en-US/home?category=learning. It is appropriate and more experts will assist you. If you have a specific technical question about Microsoft SQL Server,
you can visit and post your question on the SQL Server Forum.
There is some detail about Exam 70-466 Implementing Data Models and Reports with Microsoft SQL Server 2012, you can review the following articles.
Exam content can be found here:
http://www.microsoft.com/learning/en-us/exam-70-466.aspx
http://borntolearn.mslearn.net/certification/database/w/wiki/525.466-implementing-data-models-and-reports-with-microsoft-sql-server-2012.aspx#fbid=Mn-t6aRhs-H
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Oracle Database XE with Microsoft Windows Server 2008 (32-bit)
I would like to find out if Oracle Database XE works with Microsoft Windows Server 2008 (32-bit)?
If not, is there any other Oracle Open Source Database version can work with Microsoft Windows Server 2008 (32-bit)?
Any help would be greatly appreciated!I am installing W2k8 R2 Domain Controller with Oracle Express 10g.
This is the tip to make it work.
Go to the installer OracleXE.exe -> Right click + Select Properties + Compatibility + Run this program in Compatibility Mode fot + Windows 2003 Sp1
Then Select Run this Program as administrator.
After this run the OracleXe.exe and it will install properly.
Remember to double check that everything works fine. -
Problem with Task Aggregation from Project Server with old Project Server permissions mode.
Hi, I have installed Sharepoint 2013 with all CU, and Project Server 2013 with June CU update. Later, I attached database from old Project Server 2010 database, all was OK, but now I have my PWA with old Project Server permissions mode.
After that I have created MySite with users from AD of my company, it's OK, but Task Aggregation not working. Moreover, I have not any errors on the MyTask page.
You can see that I can insert private tasks, but I can not see any tasks from pwa, however I have a lot of tasks there. Please help me.
My search works well amd WMA Service too.
Where directly crawler search the tasks? Maybe there are errors in search log with that ulrs?Hi,
did you setup the Work Management Service Application in the Central Administration? If yes, please check if the Applicationpool account of the Work Managment Service has full Access to the User Profile Service Application (over the Ribbon | Permissions).
Check also if your Projects are published so that you have a Project Workspace for each Project. In the workspaces you should have a list "Tasks" or "Tasks1" for migrated workspaces. This is important because only Tasks from the workspaces' Tasklist are
shown in the Mysite
In any other cases please check the ULS Log and/or the Application Event log. Especially have a look to Distributed Cache Service and the Feed Cache.
Bernhard Fischer [MVP] | www.wodey.de -
Microsoft Project Server for SharePoint Standard
Hi,
We are using Microsoft SharePoint Standard version. Which product in Microsoft family should we add on to get the full capabilities of Microsoft Project into SharePoint Standard version? Is it Microsoft Project server? But Microsoft Project Server has a
prerequisite of SharePoint Server.
Any ideas?From a licensing perspective to run Project Server you require SharePoint Server 2013 Enterprise edition. A user (or device) that is using Project server would therefore require all the following CALs:
SharePoint Server Standard
SharePoint Server Enterprise
Project Server
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
¿Can i run the Microsoft Project Server in Mac OS X Lion Server?
When i use the Mac OS X Lion Server, or even, the Mac OS X Leopard Server, can i run another program like Microsoft Project Server, because i need the features that this gives me.
Thanks you for your solutions
(is it possible on Xserver?)Unfortunately, no one will be be able to answer your question re. a not-yet-released OS; they either do not know or are prevented from sharing their knowledge because of an NDA.
Maybe you are looking for
-
My itunes match subscription will be expiring soon. Will I lose all my music if I choose not to subscribe again?
-
I have a WRT610N v2 router (IP address is 192.168.1.1), three desktops, one laptop and one Windows Home Server. Two desktops are running Win XP and one is Win 7, the laptop is running Win 7. I am using Cisco Network Magic Pro on all of my computers a
-
HI All, I am getting this error while installing. I tried to modify the task file by changing from err to ign.The problem is that the taks sapview.tsk contains many entries i cannot change one and then try sapinst because i dont know what all views w
-
Creative Media Source Player clipped tracks problem
<span class="j2">I <span class="j2">am <span class="j2">using <span class="j2">the <span class="j2">Creative <span class="j2">Media <span class="j2">source <span class="j2">player (<span class="j2">Version <span class="j4">5.0.38 <span class="j2">wit
-
Hello everybody, I'm developing an application and i need to display a html page inside a view. I'm developing in SAP NetWeaver Developer Studio, Version: 7.1.0 and UI element like iFrame, or IView does not exists. Do you have a suggestion,