Integrate HR OM master data to external system HRMD_A / HRMD_B / HRMD_ABA ?

Hi,
I would like to setup hr master data distribution using PI to external non SAP system. after i have searched from the document there are 3 idoc HRMD_A, HRMD_ABA and HRMD_B. Please advise which message type more suitable for my scenario ?
Thank you and Best regards
Fernand

Hi,
The difference is in the segments that each one includes, you can check it in transaction WE30 for example for
the IDOC Type HRMD_A07 (which is linked to HRMD_A)vs. the IDOC type HRMD_ABA05 (which is linked to HRMD_ABA)
The first one manages more record, therefore you can send more infotypes. This is because its manages all the standard OM information.
The HRMD_ABA is more used if your destinatio is a CRM or SRM system which requires less data.
Regards,

Similar Messages

  • *Journal Entries while uploading the vendor master data from legacy system*

    hi SAP Folks,
    can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
    Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
    thanks in advance.
    Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

    Hi
    you will be having  only one entry logically
    i.e. Opening Bal. clrng A/c Dr.
           To Vendor A/c Cr.
    regards

  • Upload vendor master data from legacy system to internal table tcode xk01

    through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.

    By learning the basics of BDC recording and the use of GUI_UPLOAD

  • Getting data from external system

    Hi,
    What other methods that are used to get data from external system to BW? I know that DB Connect is one of the methods. Also, falt files is one of them.
    Thanks,
    RT

    Hi,
    Is there a BAPI that I can look at and start programming to get data from Informatica?
    Right now we are using CSV files. Would anyone have sample code for the doing this using BAPI? Appreciate any.
    Is there any How to paper to do this?
    Thanks,
    RT
    Message was edited by: Rob  Thomas
    Message was edited by: Rob  Thomas

  • Send R/3 data to external system

    Hi Guru's,
    how to send R/3 data to external system (Oracle databse).
    thanks in advance.
    Ramu.

    Refer to this link
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0cc5049-5837-2b10-8ca5-f0e948762522
    it is a very good document on IDOCs
    or you may search for this in
    sapbrain.com or
    thespot4sap
    or even within SDN you may search for IDOCs you will get lots of info
    Regards,
    Anil

  • Master data from multiple system compunding to source id

    Hi all,
    We have a requirement to host multiple Country SAP systems in one BW system. This requires compounding with an infoobject key on all the master data and I am using 0soursystem.
    and found that this configuration is very cumbersome( time taking) we need it to be cost effective also.
    Is there any other way of doing this and at the same time make the Data unique to the Country.
    note: one of the system is in production for 2 years now and loose that data.
    Regards,
    NPR

    Hi,
    a) what about harmonizing master data over all systems and defining one system as the leading master data system?
    b) While uploading the master data, do a concatenation of the key (material no. with the source system id or something similar)
    c) assign a complete different key to the master data and post the original key to a nav. attr. and use the nav. attr. for reporting e.g. material 4711 --> change the key to 0001, post the original no. 4711 to a attr. called zmat_orig which is added as nav.-attr. to the attributes.
    regards
    Siggi

  • Asking for help about modification to article master data of retail system

    Deal All,
    Is there any one can tell me how to modify the article master data in retail system ?
    I have tried to deal with the requirement by BDC and calling the function BAPI_MATERIAL_MAINTAINDATA_RT,
    but both of the two approaches can not update the customized fields in the table MAW1.
    For BDC, the changed data can only be update in debug mode.
    For the function, no customized fields of table MAW1 are taken into account as to its parameters.
    Can anyone tell how I should do ?
    Thanks in advance,
    Kevin

    Hi Kevin,
    Try FM: MATERIAL_UPDATE_ALL_RETAIL
    Thanks,
    Dharmishta

  • Please describe the application's ability to integrate to ext master data

    Please describe the application's ability to integrate to external master data sources. For example: product, vendor, and customer.

    Hi,
    The difference is in the segments that each one includes, you can check it in transaction WE30 for example for
    the IDOC Type HRMD_A07 (which is linked to HRMD_A)vs. the IDOC type HRMD_ABA05 (which is linked to HRMD_ABA)
    The first one manages more record, therefore you can send more infotypes. This is because its manages all the standard OM information.
    The HRMD_ABA is more used if your destinatio is a CRM or SRM system which requires less data.
    Regards,

  • FI master data in HR system

    hi,
    is it necessary to have FI master data (GL a/c, chart of acct, fsv, etc) in HR system to integrate HR - FI? Both are on different systems.
    appreciate immediate reply
    Thanks

    HI
    yes, without FI master, integration is notpossible with any other modules.
    regards,
    satya

  • Where is inbound master data in reciever system?(IS- xi proxy- SAP sys)

    I used XI proxy to connect IS and receiver(SAP sys)
    When process is error,what is the TCD to monitor the inbound master data(for example:PO) just like the TCD:WE02
    Thanks

    if you send data to an SAP system via proxy, you can use transaction sxmb_moni in the target system to monitor the calls just like you use it in XI.
    Regards
    Christine

  • Outsource payroll. Split of master data among 2 system

    We run SAP for our HR master data and outsource our payroll system to ADP.
    We aim to input data in SAP opposite to input it in the ADP system. But we want to do that only if there is not a risk that the infotype to store the data in SAP might eventually need a Legal Changes update (to update logic or check tables) that would force us to apply the most up to date Support Package (or CLC...) to bring these legal changes into our system.
    In this context we want to asses what is the risk/probability that the use of the following infotypes could need at some point the "timely" application of legal changes for them to work (notice that infotype just need to be able to store the data; further processing of the data is to be done in ADP) Please provide an answer for each of the groups of infotypes as some of them can be moved to ADP while others stay in SAP:
    1) Infotype 207 and 208: Residence and Work tax area
    2) Infotype 210: W-4 witholding information
    3) Infotype 234: Withholding Overrides
    4) Infotype 161: IRS Limits
    Thanks

    Hi Sukhbold Altanbat,
    Though the operations are doing in multipule location but data will be saved in single Central data base.
    this central data base is placed in a secured location and will be tested properly before placing i.e. it will not impacted with calamities like cyclone... etc.
    Transaction data is done only at front end but data will entered in the frontend will be updated in back end data base.
    Note:  we may have 2 servers data bases which will placed in different loaction this will be used if once gowes down,other will start working with out any imact.
    With respect to Sync..  2 server data bases will be automatically where ever is some change in db1.
    Hope this helps you, kindly let us know if any further details required.
    Best Regards,
    Maruthi

  • Getting campaign data from external system to display campaigns/offers

    Hi,
    I have to find a solution for a campaign requirement for my company.
    The user centric campaigns are managed by a external system provider who process billing statements (eg if you see your paper credit card statement, you see special offers, campaigns in your paper statement.)
    On similar lines we have to show/build the campaign in our WLP application. The campaign data is hosted in external systems.
    We have to think of a generic reciever in WLP which can get the external campaign data and based upon that it can display right campaign to logged in users.
    Any ideas, leads. Has somebody implememted such a feature.
    Any help will be appreciated

    Hi Vishnu,
    OK, I see now. You don't want a pluggable user profile data source, you want a pluggable campaign rule and pluggable campaign content. I don't think there is such a thing as a framework for plugging an external campaign into Oracle WebLogic Portal.
    I don't think you can plug an external campaign rule into the Oracle WebLogic Portal rules engine but you can make Oracle WebLogic Portal see external user profile data and external content. So, 2 of the 3 ingredients for the campaign are easy enough to make available to the portal. I would guess that you either need to transform the campaign definition into the proper XML document for consumption by the portal's rules engine or you need to evaluate the campaign on the external system and have the results available to the portal via a mechanism like UUP.

  • PI sheet data from external system for GI and GR

    Hi Gurus,
    I need a help to set up a PI sheet related config (type 2 or 3 of CRD), wherein I will get the GI and GR related information from the external system , eg Bar code scanner and some PC automation etc.
    Regards,
    Amol Kale

    Hi,
    I am not sure of the usage of the RFC's in this context.
    If you want to read a file from the application server, use the OPEN DATASET, READ and CLOSE DATASET commands.
    You can find more help on this here
    http://help.sap.com/saphelp_nw04/helpdata/en/79/c554dcb3dc11d5993800508b6b8b11/frameset.htm
    You can upload the entire file into a internal table which a a field of string data type and after that loop at the table and process the data according to your logic (Either length delimited, ',' delimited.
    Ig you want to do this remotely, you can put all this logic in the function module and make it remote enabled.
    Regards,
    Ravi
    Note : Please mark the helpful answers

  • Loading data from external system

    Hi,
    Im really having a hard time trying to load data with a DM package... im using  BPC 75 MS SP04, im trying to obtain data from a SAP ERP system... once obtaining it, I have 2 options:
    - Create a conversion file  in order to "unify" the master data from ERP to mine. Since i still dont understand how this works, i think that will imply writing a file with over 500 rows of data  (one for every converted member)... this is
    ACCOUNTS:
    SAP          -     BPC
    CUENTA10 - 4040
    CUENTA11 - 4041
    .....  and so on....
    - Or get that info converted to my syntax (ready for BPC),  and place it directly in the DB (sql server 2005)
    In either case, how can I do this?
    Thanx in advance.
    Velázquez

    Hi,
    This can be simplified using the java script. Conversion file supports java script. Please take a look at few examples in the below link from help.sap:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/81/94a8a5febd40268d5c59b4fc31be37/content.htm
    Hope this helps.

  • Send BP changedOn date to external system

    Hi CRM Technical Experts,
    I am using bapi crmxif_partner_save_m01 to send create and change of BP to external system as Idoc. I also need to send changed on date and user id, if changes are made to bp. but I could't find appropriate fields in bapi. Idoc contains only create date and time.
    Is there anything with bdoc to send or how is it works.

    hi
    Mehar
    We need to customize the settings in Middleware for data integration between CRM and a external system
    this can be done through XIF adapter
    please navigate through IMG as follows..
    IMG --> Customer Relationship Managment --> CRM Middleware and Related Components --> Exchanging Data with External Components --> XIF Adapter Setup --> Outbound/Inbound Direction
    hope it clarifies
    Venu

Maybe you are looking for