Integrate new MA without changing the existing environment

Hi,
Can any one please suggest me for the below scenario.
Consider in the current environment. , we have deployed FIM sync server and configured three management agent of type ADDS. There are some rule extension deployed for exchange and Lync. FIM Portal and MS Bhold is not installed and used. Total
number of user are 15k.
Now we have new requirement to integrate a new AD and new Ldap management agent to provision and provision 500 user.
For these new 500 users, we also need FIM Portal and MS Bhold.
We don't want to make any change in the existing configured MA. Can we implement like this.
1. Install FIM Portal and MS bhold on the existing server on which FIM syn server is already installed.
2. Configured the new management for new AD and Ldap.
3. Configured the FIMMA to allow only the new 500 user to provision in FIMService based on some criteria which can get from the new AD and Ldap.
4. Do the required configuration of MPR,Syn rule etc in FIM Portal.
5 .Do the configuration export and import the user in Bhold for only new 500 users to approval, groups management etc.
OR
Install the FIM Portal and Bhold and then reconfigure the all exiting management agent using the FIM Portal GUI.
Please suggest which is best way. If we need to reconfigure the all the existing MA using FIM Portal or just install the FIM Portal and Bhold and configure the required MA for new 500 users only.
Thanks
Harry

Thanks Dominik for your response,
So it means there will not be any performance issue if we keeps existing MA in Synchronization server (without FIM Portal) and install the FIM portal and Bhold to manage and create new AD and LDAP MA for new 500 users using FIM Portal GUI.
As well as per my understanding, only 500 cals Licence will be required because only new 500 users will be managed by FIM Portal (FIMService) and MS Bhold. Cals license will not be required for rest old 15K user because these
will be managed by only by Synchronization server(FIMSynchronizationService ) not FIMSevice.
Please correct me.
Thanks
Harry

Similar Messages

Design to integrate new code without changing the existing code

I have a timer class which will measure the time taken for the method to execute. I want to integrate this to my present code base. basically the timer class just starts the time at the start of the method and once the method completes it subtract the final time from the start time to give me total time spent in this method. I was wondering if there's a way by which i can integrate my timer without actually changing my methods.I have to start the timer when the method is going to execute and end the timer once it has finished executing. Any design pattern you think could help me?

javanewbie80 wrote:
I was wondering if there's a way by which i can integrate my timer without actually changing my methods.I have to start the timer when the method is going to execute and end the timer once it has finished executing. Any design pattern you think could help me?Those are contradictory and exclusive.
A design pattern represents an idiom, generalized from several specific examples, of commond coding practices.
Thus if you use it is is code.
So the question has nothing to do with a design pattern.
As for the other part of the question, as suggested AOP or generally code injection.
You might note as well that there are already commercial applications and probably non-commercial as well that exist to time application run time and the method level.

HT1296 how to add new photos without deleting the existing photos in ipad

Hi,
Can anyone tell me how to add new photos/PDF books from my PC to iPad without deleting the exsting data in iPad?

Hello AJ2349
If it is prompting you that it will replace the data on your iPhone, then that is typically the result of syncing with a different computer. The only way you can bypass that is to replace the media on your device and then sync. Now it will only replace items that would be considered purchased items like music, movies, TV shows and Apps and would not delete any pictures from your iPhone. Alternatively you can setup a Shared Photo Stream and then add the Photos there without syncing your iPhone with your computer. Check out the articles below for more information.
iOS: Issues syncing content with multiple computers using iTunes
http://support.apple.com/kb/ts1474
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
iCloud: Shared Photo Streams FAQ
http://support.apple.com/kb/HT5903
Regards,
-Norm G.

How can I transfer a profile to my new computer without overwriting the existing profile?

I have a new Window 7 computer and have started using TB. I now want to transfer my messages from my old (Window XP) and do not want to overwrite the data in the new computer. Is there a way to transfer the old data and add it to the new profile?

For downloads of CS3 see THIS thread.
For your serial number, if Photoshop is still running on your old machine;
Start Photoshop. Goto Help > System Info. Buried in amongst all the stuff in there will be your serial number. Read through it carefully.
If Photoshop is not installed / running on your old machine, then you are indeed pretty much hosed.
This is always assuming software that old will run successfully on a new machine, of course.
--OB
Dang! Too late again!

How to name individual clips without changing the name of the original file...?

Hi,
Theres likely to be a really simple solution to this, but i can't find it! I've done my in & out points, i've created a new clip and i'd like to give it a unique name. When i rename the clip the original file name also changes. How can i rename the new clip without changing the original file name?
Please help,
Thanks
Ed

Either make the clip a subclip or convert it to a new master clip. Both can be done in the Modify menu.

How to edit the cube with new fields without changing historical in BI 7.0

HI,
I have requirment that need to edit cube with new fields and without changing historical data on it.
Please some one can advise me abt the above scenario.
Note:I am using BI7.0

hi Krish,
In BI 7.0,
we cannot add a characteristic to an existing dimension if the data is not deleted from the cube.
It can go to a new dimension and that will not change the existing structure of the cube tables, but will just add to it (as another dim table). or use remodeling.
for more details, please seach threads.....
with hopes
ARS

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?

Hi howe.sc,
When I checked for how signatures in Yosemite work, I found this.
Mail (Yosemite): Include signatures in messages
Delete a signature from a message: Select the signature, then press the Delete key.
Replace a signature in a message: Delete the existing signature, then add a different signature.
That sounds similar to what you are describing.
Take care,
Nubz

How do you move a track region in Garage Band to a new starting point without altering the existing length of the track?

How do you move a track region in Garage Band to a new starting point without altering the existing length of the track? Thanks.

What exactly are you trying to do? You can drag any region by grabbing it in the middle of the upper area with the highlighted name of the region. However, if you move it towards the end of the track, the length of the track will get longer, to accommodate the extra part of the region. DO you want to speed up the region, to shorten it or do you want to trim it? You can simply grab the right margin of the region and drag it, to make the region shorter.

Can v define a new absence type without changing the grouping.

Dear friends,
      can we define a new absence type without changing the employee subgroup grouping and psg.
my requirement is i have a absence type lop which has 1 as esg and 28 as psg.as per my pcr i have to cumulate total lop hours and deduct from total working hours.
can any one tell me how can i modify the absence type so that i can use it in my pcr.
Regards,
sai prasad

Dear sreenu,
    if i create a time type.can i refer in this
following pcr
5200
ADDWT *       NUM=GSAP**
ADDWT 5310
if yes, can you plz tell me how can i do it

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

Can I alter the properties of an individual link on a HTML page without changing the other links?

Hi there,
I have a contact page created in Dreamweaver and have created an email link to launch Outlook when clicked on. However, all the links in my design have been set a certain way, i.e. white text knocked out of darker background. My email link however, is on white background so you can't see it against the white. I want to go in and simply change the color property of the email link without changing the other link colours on the page. I've tried but without luck. Is this possible to do?
Thanks in advance for any help!

Hello and thank you for your answer. I'm still a little confuse though.
My existing HTML looks like this:
<p><a href="[email protected]">[email protected]</a><br />
My link preferences are for the who page and are at the top and look like this:
a:link {
    color: #FFFFFF;
    text-decoration: none;
a:visited {
    text-decoration: none;
    color: #FFFFFF;
a:hover {
    text-decoration: none;
    color: #CCCCCC;
a:active {
    text-decoration: none;
    color: #CCCCCC;
.style2 {font-size: 14.5px}
.style3 {color: #FFFFFF}
Where exactly should I insert the new link ID that you suggested <a id="special_colors" href="url...">link text</a>
Also, where exactly should I place the following in relation to the CSS document
a#special_colors:link {color: red;}
> a#special_colors:hover {color: green;}
Sorry but this is all quite new to me. Thank you for your patience and help.

Impact of Addition of New Value Fields in the existing Op. Concern-COPA

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1)     The client requires three new value fields to be created. Value fields for :
-     Other Airport Charges - International
-     Cargo Commission Cost
-     Personal Cost (Direct)
2)     What are the Steps involved in creation of new value fields? The steps are :
1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4)     If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6)     What are the different methods of cost and revenue allocations in SAP?
7)     I have checked the status of the value fields across clients, It is as followsu2026
     Value Field     Value Field For     Description     Development      Quality     Production
1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

How to write a pgm to change the existing encrypted password

Hi all,
can anybody tell me how to write a pgm to change the existing encrypted password.
thanks in advance.

Well, it's going to depend on how it's implemented in the current system.
But basically it's going to look a lot like the current login actions. Presumably you have something that takes the user ID and password, encrypts the password, looks up the encrypted password in the database matching that user ID, and compares them. This functionality would also take a new password (preferably twice so they can be checked for consistency), and if the existing encrypted passwords match, it will encrypt the new password and put it in the database where the old one was.
And if the application has a mechanism for new users to sign up, it'll look a lot like this as well.
But I'm just guessing. This is all going to depend on how the existing functionality is written. Probably the best thing you can do is talk to a programmer at your organization who has worked on the application, and ask them for help.
Hope this helps anyway.

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

How to change the existing sap logon ticket

HI
I did the System copy from my production server to Quality server.
Now everthing is working except Single Sign On. This is due to SAPlogon ticket.
the SAPlogon ticket show the PRD sid. I am not able to change the existing sid in ticket.
Tell me how to chage the old saplogon ticket with new one.
Workaround i did in my server.
generated the new certificate for Quality server and try to import in R/3 000 client. but not successful.

Hello Lee,
You dont have to import the certificate from R/3 into portal
we have to generate the certificate in portal and then import in R/3
To generate the portal certificate in quality Portal system and uploading in R/3,please find the method:
Log on to the Visual Admin of Portal with administrator id and password. Go to the following node: Server 0 1_34158->services and then Key Storage
In Key Storage, go to TicketKeyStorage
Under Entry, choose Create.
The Key and Certificate Generation dialog appears
Enter the Subject Properties in the corresponding fields
CN=<Common Name>, OU=<Organization Unit Name>, O=<Organization Name>, L=< Locality Name >, ST=<State/Province>, C=DE. give SID of portal in CN
Give the Entry name as SAPLogonTicketKeypair.
Select Algorithm as DSA,also click on store certificate and then generate
You will see along with SAPLogonTicketKeypair, SAPLogonTicketKeypair-cert will also get generated.
Now we will have to import this SAPLogonTicketKeypair-cert in the ABAP systems
First we will have to download the certificate from the portal.
Now logon to the SAP Netweaver Portal with user administrator
Go to System Administration->System Configuration and then Keystore Administration.
In the Content tab you will find the list of certificates
We have to download SAPLogonTicketKeypair-cert .Click on Download verify.der file
To your desktop
Now we have to import the certificate in ABAP system.
Log on to the ABAP system 000 client and use T-Code STRUSTSSO2
Under Certificate, click on Import certificate
Give the path of verify.der file. The file format should be Binary
And upload it.
Now you can see the certificate has been uploaded. Check for the validity
Now click on Add to certificate to add this.
Now click on Add to ACL.
Enter System ID as the portal SID(i.e is SPQ) and client as 000 and click on Ok
Then save your entries
Hope this makes it clear
Rohit

Integrate new MA without changing the existing environment

Similar Messages

Maybe you are looking for