Integrate PI and TIBCO together for message exchange

Hello All,
We have an environment where we need to integrate SAP-ECC with a 3rd party CRM system using PI and TIBCO.
So the data flow would be ECC>PI>TIBCO-->CRM system and vice versa.
I wanted to know if anyone here has done this before.
If yes, would you be able to help me with the following:
1. Which adapter can we use to integrate the 2 middlewares.
2. If anyone has used this before, are there any known issues
3. Based on SDN search it is suggested to use SOAP adapter for PI TIBCO integration - can someone confirm if we can use both synchronous as well as asynchronous methods in SOAP adapter.
Any other inputs are welcome.
Many thanks
SK

Hi,
I wanted to know if anyone here has done this before
Yes, someone has done this before
1. Which adapter can we use to integrate the 2 middlewares.
HTTP or SOAP can be used.
2. If anyone has used this before, are there any known issues
No issues as such, that I noticed. But do consider the security between the two systems, data size, Monitoring, Message processing etc.
3. Based on SDN search it is suggested to use SOAP adapter for PI TIBCO integration - can someone confirm if we can use both synchronous as well as asynchronous methods in SOAP adapter.
Yes, SOAP (& HTTP) is the most common adapter between these two middleware tools, for both async and sync processing.
Regards,
Neetesh

Similar Messages

Exporting audio and video together for Mpeg2 dvd

Hi, I'm trying to export audio and video together for Mpeg2 dvd.. I changed multiplexing to DVD but is still exporting seperately is there something im missing? thanksa

To add, with Multiplexing set to NONE, check what the Audio format is set to. If "PCM", this is an uncompressed .wav file and will result in export of .m2v video and .wav audio (I think Mac uses .aif) and use "Import as Timeline" in Encore for both clips at once. Encore will automatically transcode the audio to Dolby AC-3, do NOT mess with settings in Encore, defaults are correct. If you have CS6, then in AME audio settings, there is an option for Dolby and you can use that to create the .ac3 audio and then Encore does NOT do any transcoding to audio or video. Note that older versions will also show "Dolby" but that is a free trial of a surround encoder, not the same. You just want the stereo option available in CS6, or use PCM option is fine
Thanks
Jeff Pulera
Safe Harbor Computers

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price I am paying for Photoshop alone?

I am subscribed to Photoshop only and I want to know if I can change my subscription to have your new offer of Lightroom and Photoshop together for the same price that I am paying for Photoshop alone?

Contact sales support by web chat. They can cancel your current subscription and transfer you to the new one if you are within certain criteria. Otherwise you may need to wait until your subscription runs out and then sign up later.
Mylenium

I've deleted all my emails and texts to make room for the 7.1 upgrade but my usage still says I'm using 641MB for mail and 364 MB for messages. Anyone know how to free up this memory? Thank you.

I've deleted all my emails and texts to make room for the 7.1 upgrade but my usage still says I'm using 641MB for mail and 364 MB for messages. Anyone know how to free up this memory? I have a 16 GB model. Thank you.

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

How to correctly configure send and receive connectors for SBS2011 exchange to connect to EOP

Hello SBS fans,
we have a customer with SBS2011 and exchange. The server email is setup for Exchange Online Protection.
It passes the Remote Connectivity Analyzer for inbound and outbound email. It shows a warning for the spf, saying it cannot find the spf record, BUT MXtool box passes everything associated with their domain name, including the spf record.
They are now getting some bounced email from yahoo servers, referencing this ip
65.55.169.249, which is a valid Microsoft ip.
I checked the bounce back email header carefully, and found a reference to an internal ip, 192.168.11.14, which just happens to be the ip of the user's desk PC!! - NOT the local addr of the sbs2011 server (which should not be there anyway)
I will guess that there is an incorrect setting in one or both of the hub transports? There is a correct smart host connector.
I am no longer sure about the other connectors!
Any ideas on this?
ewholz
Network and Server Installs

Hi,
à
It shows a warning for the spf, saying it cannot find the spf record
Would you please let me know the complete warning message that you can get? Meanwhile, would you please let
me know how long ago you add the SPF record? Be
more than 72 hours?
Please also refer to following article and check if can help you.
Configuring
Exchange 2007 Hub Transport role to receive Internet mail
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Configuration for Message Exchange in integration process

Hi,
I'm a beginner in SAP XI (7.0) and trying to develop an integration process for a purchase order.
There will be sent a message via Http to a receiver with Ftp.
So for the integration process are two communication channels necessary which will be defined in the integration directory:
One for the Sender: Http.
One for the receiver: Ftp.
Within the integration process are some sender and receiver steps with Bapi's.
My questions are:
- how and where could these sendings to a Bapi (send step) and from a Bapi (receive step) be configured?
- is it possible at all to configure a communication channel for these sending and receiving steps within a integration process?
Thanks for your help!
Zoran

Hi Zoran
While using BPM as well you will need to have communication channels.
BPM - > BAPI request.
BAPI response -> BPM
both sender and receiver channels are required for you.
1.Demand for a material is send via HTTP to XI
2.XI does a material availability check to the SAP system
3.A material reservation has to be done if there are any materials available in the stock (inventory) to the SAP system
4.If there is no material available a purchase order to a supplier (no SAP) has to be done via FTP
5.Parallel to the purchase order a purchase order confirmation is send to the the SAP system.
6.The supplier sends a purchase order confirmation to XI
7.The XI sends a purchase order confirmation to the SAP system
If i understood your requirement correctly and you want to use BPM. You need to do following in BPM
Receivestep1(receive HTTP post) -> transform1(mapping to BAPI request) ->send step1(Send BAPI request to SAP) -> Receivestep2 (Receive BAPI response from SAP) -> Transform2 (Map BAPI response to File)-> send2(File post to non SAP supplier)-> Receive3(receive purchase order confirmation)-> transform3(map to SAP purchase order confirmation)-> send3(Purchase order confirmation to sap)
You need no of channels
1.Receive 1 - (HTTP)
2.Send1/Receive2 - (RFC)
3.Send2 - (FTP)
4. Receive3( HTTP or FTP)
5. For purchase order confirmation.
Thanks
Gaurav

Memory and CPU Allocation for Messaging Device

Hey Everyone.
I'm writing a code for a UDP-based controller right now. The gyst of the code is that it takes in command inputs, writes it to a UDP message, and passes this message to aconditioning unit. The conditioning unit passes a message back ensuring that it received the initial prompt. This happens at a rate of 1 Message per 2000 us, back and forth. My problem with this system is that when other, additional programs are launched upon the same computer (the HOST) the message rate drops and they system initiates a shut down. The new programs are not wire-communication based.
Are there any practical ways to reduce data/memory usage within this program?
Attached is my current code.
Attachments:
HostControler.vi ‏72 KB

I agree with what nathand has said - it's almost impossible to get accurate timing from a Windows OS and anything the computer decides to run in the background (defragment, anti-virus scan, some scheduled service, launching another program) will have an impact on the reliability of the timing.
There are things you can do to reduce it (stopping all unnecessary services, running your application as higher priority) but Windows really isn't designed for determinism so you wouldn't really be able to eliminate it.
If you need deterministic timing you need to think about using a Real Time OS. Otherwise you'll need to make your timing requirements more relaxed as in try to send a message every 2ms but don't shutdown the system unless you don't receive a message for 500ms.
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Using Aperture and IPhoto together for RAW

Hi All,
I have just received my MBP and will be using Aperture to edit my RAW files from a Nikon camera.
I was wondering if Aperture works the same as IPhoto in regards to the library function or do you still use IPhoto to arrange, tag your images etc...
If that is the case how do you do that if you are using RAW files? Does IPhoto recognise RAW images?
I would like to hear your workflow on a MAC.
Cheers.

Sad to say Richard but you are close but not quite correct. Aperture has a much reduced set of RAW support vs. iPhoto. Of this I can personally attest, but they're both covered on the Apple site.
To add to some other points you address...
iPhoto is still needed for simple integration with other iLife apps., as Aperture has no iLife integration. There is an Aperture2iLife script available (Lightbox software) which automates an export and import process. If you carry an iPod around with photos, then you'll need to maintain iPhoto for that purpose. Welcome to the land of duplicates!
iPhoto does indeed process the RAW and all image work is performed on a JPEG version therafter. The RAW is never used, but is stored in the Originals folder (along with any original JPG or TIF files from the camera if these were shot vs. RAW).
Aperture's RAW converter is markedly superior to iPhoto, and the control and editing options likewise. As noted, Aperture does not change the original RAW (or other imported file), but saves the edit instructions (akin to adjustment layers in Photoshop) for rebuilding the image viewed from the original. Enhanced book and Web Gallery options exist vs. iPhoto ... so integration to iWeb isn't quite as important, though would be very useful.

Portal and Delegated Administrator for Messaging

Hi,
I was wondering if anyone has managed to get the iPlanet Messaging server Delegated Admin working properly with the portal gateway.
In particular - was anyone able to adjust the gateway rewrite rules to prevent the gateway only from appending to the URL's in the left control frame? We have tried various rewriting combinations but none have worked so far. A rewrite of the hRefStr variable comes close does not work as it does not handle the escape character "\" properly and appends extra info as well. The URLs turn out like the following example:
https://gateway.com/http://portal.com/servlet/"/servlet/getPage?op=createMLM&mode=edit"
If anyone has suggestions on how to overcome this it would be greatly appreciated.

Can you tell the version of Portal Server that you use. There are some known issues with SP2, and it is rectified in sp3. Or else this should be an issue with iPlanet Delegated Admin.
Thanks,
Raj_indts
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support

How to Integrate Oracle 10g with TIBCO Enterprise for JMS

Will it be possible to provide a document that will instruct on how to integrate oracle10g with TIBCO Enterprise for JMS
I needed to Integrate oracle 10g with TIBCO Enterprise for JMS.
When i searched on internet about how to do it, i found a document on oracle's site which has instructions (in the HOW-TO section) related to integration with OC4J (and not Oracle 10g)
I have been successfully able to integrate OC4J developer preview edition 10.1.3 with TIBCO enterprise for JMS.
when i tried with the same instructions to integrate oracle 10g with TIBCO Enterprise for JMS, i could not succeed. The i understood that the standalone OC4J is different from the embedded OC4J in Oracle 10g
Will it be possible to provide a document that will instruct on how to integrate oracle10g with TIBCO Enterprise for JMS
Your help will be really appreciated
Thanks,

There are how-to documents here: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/index.html#JMS
with separate instructions for:
IBM WebSphere MQ JMS
Tibco Enterprise for JMS
SonicMQ JMS

IDocs or Enterprise Services in message exchange between systems

I am trying to get some qualitative and quantitative answers to the comparison of Enterprise Services or IDocs as a choice of interface technology when exchanging messages via PI with external systems.
The external systems are probably going to have their own message format, so this would concern the nature of the interfaces of the ERP system interfaces to the PI system.
I have seen one other posting in this forum related to this, but no definitive answer.
Does anybody have any system performance comparisons using the two technologies, such as message throughput / hour? Not easy to compare I know.
Does anybody have an opinion as to the suitability of Enterprise Services for such a task? Is the technology stable enough to be trusted yet?
When comparing status messages of IDocs, do the Enterprise Services have a similar way of easuly seeing the delivery status of the message using the Enterprise Service?
Would anybody or has anybody actually been brave enough to use Enterprise Services in this way yet?
Are Enterprise Services appropriate for mass messaging?
All answers very much appreciated!
Kind Regards,
Tony.

Hi Michal,
Thanks for the reply. I try to respond to your questions precisely:
if you want to compare IDocs to services then I assume
we're talking about async services right?
(and most services - just like bapis - are sync messages)
so you compare two different things
Yes, I know. What if the message scenario was asynchronous, and you chose not to handle the response message of the Enterprise Service? You could still do that, right? Then the problem becomes how do you trace the status of the Enterprise Service transaction.
IDocs have the advantage of a status message, and a good message monitoring system, but I am not sure if the visibility of errors seen with Enterprise Services if treated asynchronously would be as obvious. My knowledge of the runtime of the Enterprise Services is currently a bit limited.
The whole reason for me asking about the use of Enterprise Services is that there are so many now that could be used for message exchange, if they were suitable for the task.
Also, what about creating Asynchronous/Synchronous bridges in PI to handle the response message? Then the response is always traceable, correct? Even if the customer doesn't want the response message, the content could always be found in the PI message monitor.
Additionally, there is a transaction in ERP that wraps a BAPI into an IDoc (don't have a system in front of me at the moment and cannot recall the transaction, maybe OM69 or something similar). Now, that is taking a synchronous 'service' (the BAPI), and converting it into an asynchronous IDoc. So if this is such a bad idea, why do SAP provide the transaction? Therefore, by extension, wouldn't it be possible to do the same thing for Enterprise Services, at least from a philosophical point of view? I mean, why would SAP imply you could do this for one kind of synchronous service (the BAPIs) but not others (the Enterprise Services)?
if you're talking about migrations etc I don't believe services
will be used with LSMW but BAPIs are on the other hand
No, I was talking about high volume message scenarios, sorry for the ambiguity. I guess if the performance of Enterprise Services is comparible to that of well written BAPIs, the answer is 'yes', correct?
Kind Regards,
Tony.

Can I "Lock" Photoshop CS3 and Bridge Together ?

I like to have Photoshop and Bridge open together.
However, every time I click on the Bridge interface, either accidentally or to reposition it etc. Photoshop vanishes and I have to bring it back.
Whilst it is not a terrible malfunction it is irritating and it never occurred with the Browser in Photoshop Elements 2.
Is it possible to lock them together so that PS will never disappear ?

Adobe has already very conveniently linked Bridge and Photoshop together for you, in several ways other than window clicking and other than what OS X provides.
On the File menu in Photoshop, there's a "Browse" command that goes to Bridge. In Bridge, there's a "Return to Adobe Photoshop" command. That sounds odd but here's the thing: They use the same keyboard shortcut, Command+Option+O. So if you learn that one single shortcut, you can flip between Bridge and Photoshop instantly. I use Command+Tab a lot too, but that can be a pain if you have a lot of apps open. Command+Option+O is a direct express route between Photoshop and Bridge.
If you prefer mouse clicks, when you're in Photoshop you can get to Bridge by clicking the Go To Bridge button in the options bar at the top of the screen. From Bridge to Photoshop, of course you just double-click the file you want to open in Photoshop.
Bridge also has File > Close and Go To Bridge (Command+Shift+W), which is great if you finished editing a file and want to get to the next file in the folder. Just hit Command+Option+W, Photoshop closes the file and pops you back to Bridge, you hit the arrow key to get to the next file, hit Return and boom you're back in Photoshop with the new file.
The links are all there and ready to go.

Delegated Admin for Messaging does not run properly

Hi, my environment is:
iDS5.1, iMS5.2, iCS5.1 and Delegated Admin for Messaging 1.2.
I have installed all the components and it seems to run fine, but when I log on to the Delegated Admin I cna't see the frame in the middle of the browser window. An error appears that "The page cannot be displayed".
I had a look in the error log of the WebServer to see what might happen and I saw the following error message:
Internal error: servlet service function had thrown ServletException (uri=/servlet/getPage): javax.servlet.ServletException: java.lang.Exception: ../templates/isp/SearchSelected.html:45 -> Template contains directive that first requires LdapEntry to be initiallized by program., stack: javax.servlet.ServletException: java.lang.Exception: ../templates/isp/SearchSelected.html:45 -> Template contains directive that first requires LdapEntry to be initiallized by program. at java.lang.Throwable.fillInStackTrace(Native Method) at java.lang.Throwable.fillInStackTrace(Compiled Code) at java.lang.Throwable.<init>(Compiled Code) at java.lang.Exception.<init>(Compiled Code) at javax.servlet.ServletException.<init>(ServletException.java:107) at netscape.nda.servlet.NDAIMSGetPage.execute(Compiled Code) at netscape.nda.servlet.NDAServlet.doPost(NDAServlet.java:117) at netscape.nda.servlet.NDAServlet.doGet(NDAServlet.java:138) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897) at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464) , root cause:
I had no errors during the installation and the access to the LDAP server seems to be o.k. because it is possible to log on to the Del. Admin.
Does anyone can give me hint what this might be?
Any help would be very appreciate.
THX
Marcel

iDS5.1, iMS5.2, iCS5.1 and Delegated Admin for Messaging 1.2.
Why is anybody installing 3-year old software today?
The error message implies that not all installation steps were done correctly. The most common problem is that when ims_dssetup.pl is run, the entries there are not correct for what you intend to put in during Messaging install...

I keep getting message on Iphone and Ipad Enter password for the Exchange account "Chris Buggy" when I try to access my personal email.

I keep getting message on Iphone and Ipad "Enter password for the Exchange account 'Chris Buggy' " whenever I try to access my personal email account. I tried all possible personal passwords and none work. This is company issued Iphone and Ipad.

Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason

Mail "this message has no content" for random Exchange messages

Are other people still having this issue with Mavericks Mail? I saw many old threads for previous OS X versions.
I have a new MBP (supplied with Mavericks installed - now 10.9.2 Build 13C64) which connects to a local MS Exchange (Small Business Server 2010). Mail is configured to collection mail from it and some other email accounts (eg .mac and Google). Mostly this works fine but randomly I get some emails from the Exchange account which show "Loading ..." in the preview pane and then "This message has no content". These messages show up on my iPhone with full content.
The suggested workaround, from some older thread, was to delete the message and then drag it out of the Trash. This appears to work every time.
Is this a timing issue? Does Mail give up waiting for the Exchange server?
Are others still having this issue?

Back up all data.
Select the message and delete it from the mailbox. It will be moved to the Trash mailbox. Immediately press the key combination command-Z to undelete.

Integrate PI and TIBCO together for message exchange

Similar Messages

Maybe you are looking for