Integrate SAP BI with third party Java application

I want to display reports from SAP BI to third party java application. I have found many javadocs, but have not found any document that helps with this problem.

Not much information provided.
BO Version?
Reports in question?
There are different set of SDKs for different reports. Also there might be changes in the API's between different BO products.
As suggested by Jawahar, its better if you post your query to SDK forum for better response as it is the dedicated forum for BusinessObjects Java SDK queries.
Thanks,
Prithvi

Similar Messages

HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

HI expects,
HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

Hi,
In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
IDoc supports only Async communication and in Sync case performace is good using Proxy.
In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
Thanks
SaNv...

Sso with third party java application.

hi all,
I want to have single signon for third party java application deployed on websphere 5.0 advanced server .
I am using SAP EP6.0 SP13 .
Can anybody help me out.
thanx in advance.....
Sarang

Hi Sarang
Please refer to the following thread. It should answer your question.
SSO between SAP EP and JAVA app on WebSphere Application Server 5.1
Also refer to the following document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/ibm/how to set up sso between sap enterprise portal and ibm websphere portal using tai.pdf
Hope that was helpful.
Warm Regards
Priya

Is possible to Integrate SAP BCM with Third party?

Hello Everyone,
Some of you can tell me if Is possible to integrate SAP BCM with another solution IBM ITSM?
The integration would also have the screen pop up the same or similar to SAP CRM.
Thanks in advance.
Best regards
Rodrigo Lucas

Hi Rodrigo,
There is the ClientCOM interface!
The interface is an application programming interface (API) to a softphone client Communication
Desktop (CDT). This client application is based on the Microsoft Internet Explorer, and they can
handle telephone calls by using the VoIP (Voice over Internet Protocol) technology.
This interface defines a subset of the events and commands that are important to third-party
developers. Currently it is used finding out who is calling, and making outbound calls, playing
files to outbound callers.
You can download ClientCOM interface document in SAP Marketplace.
Best Regards,
Heber Olivar

Need connectivity of SAP Oracle with Third Party tool with dsn

Hi Friends,
We need to access SAP's Oracle database with third party tool with the help of dsn creation. For that we need to create 2 staging tables and need a new segment for these tables. Our data will move from SAP transactions to these 2 tables and we want to fetch this data via dsn into another third party S/W.
I am unaware of such kind of working, can you please help me how to create new segment and how to create dsn for accessing tables in this segment.
Our requirement is as follow.
The staging tables are required in the SAP database with user name and password. The user should have all access to the staging table only.
Requesting your kind help on this issue. Please suggest for further processing of activity.
Rgds, Krishan Raheja.

Hi,
Common way to integrate SAP (database) with third party Application is to use and implement SAP Connector (Java or .Net).
Using this, you can fetch the data from SAP database to use it in Third party application.
As per my understanding the method you mentioned, will void the SAP database license term.
So Please check before doing such configuraiton. Also that method is NOT recommended..
Regards.
Rajesh Narkhede

Configure sap xi with third party application?

Hi fredz,
Can any pls explain with technical details and steps how do i configure sap xi with third party application and what type of connectivity and interfacing communication channel is preffered?
Is there any option to web-services for interfacing between SAP system-SAP XI system-Third party Application.
Pls be specific if and only if u have done this scenario.
Regards,
Ameet
Message was edited by:
Ameet Jassani
Message was edited by:
Ameet Jassani

Hi
 
This is a very generic question. There are some getting started guides available in the main XI section on SDN, and also some step-by-step guides in the wiki section. A quick search will get you tons of information.
 
The choice of connectivity and interfacing communication channel is really dependent on the capabilities of the third party system.
 
Also, to get good results on this forum, please read the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>
 
Regards
Manish

DST changes impact on third party java applications

Currently we are running the following versions...
O\S Windows Server 2003
JRE 1.4.2_11
JDK 1.4.2_11
Should the JRE \ JDK be patched with tzupdater utility in case of running the third party java application?

You don't have to apply tzupdater tool.
Already JDK1.4.2.11 have the updated DST Time Zone Entries.
Ref: http://java.sun.com/developer/technicalArticles/Intl/tzupdatertool.html
Regards,
Vel

Integrating SAP System with Third Party Software

Hi,
I am working on an implementation project and need to integrate SAP system with a third party system. SInce I am a functional consultant, I am finding it tough to understand the integration issues. Can somebody explain me how to link up the two systems and what are the various tools available for this ?
Regards,
Rohit

Hi,
Inorder to integrate various systems we have various interface methodologies provided by SAP.
SAP systems use the following interface technologies:
ALE: Application Link Enabling
BAPI: Business Application Programming Interface
CPI-C: Common Program Interface Communication
EDI: Electronic Data Interchange
HTTP: HyperText Transfer Protocol
LU 6.2: Logical Unit Type 6.2
RFC: Remote Function Call
OLE: Object Linking and Embedding
SMTP: Simple Mail Transfer Protocol
SOAP: Simple Object Access Protocol
TCP/IP: Transmission Control Protocol / Internet Protocol
XML: Extensible Markup Language
In general we use ALEs and BAPIs.
The ALE uses IDOCs as the data transfer medium and need various middle ware systems inorder to receive and process these IDOCs.
BAPIs use Remote enabled functions which can be accessed from any platform also using any language ( like JAVA, VB etc).
Thanks and regards.

Integrate Solution Manager with third party ?

Hi All,
We need to integrate SAP solution Manager 3.2 with third party Help Desk software. How can do that?

check this link:
http://help.sap.com/saphelp_sm40/helpdata/en/65/e0a3a3040348ffa71f0908679a883e/frameset.htm
Ranjeet

Sap integration with third party software

hey all,
we are actually trying to integrate sap with EAI( IBM WEBSPERE third party software) and here date needs to flow from EAI - SAP.
and we have done that through BAPI and in the EAI we got a message saying that the data base has been created but infact when i am trying to check the same in my sap screen am not able to find it i have also checked the database table but its not available .
do anyone has any idea as to where do we exactly go and search for a particular data once its transferred from a third party software????
any help is highly appreciated
Thanks & Regards,
Vinila Kanakala.

COMMIT WORK is necessary after most BAPIs. What you describe is usually a result of calling BAPI without COMMIT WORK. The message tells you that document was created, but when you look into database, the document is not there.
I'm not sure how to resolve this in case of the 3rd party software though. Maybe instead of just using a plain BAPI you will need to write a custom function module, which will capp BAPI and do COMMIT.
Hope this helps.

SAP Integration with Third party tools (WMS)

Hi Guys
We are using SAP - WMS , ASRS(Automatic Storage and Retival system) in warehouse for putaway and pick operation. We want to automate this process and came to know that this can be done using RFC .can anyone share his learing & idea about the architecture and way of working also during installation what are the point we need to take care.
Thks in Advance
R'ds
Manish Kumar

COMMIT WORK is necessary after most BAPIs. What you describe is usually a result of calling BAPI without COMMIT WORK. The message tells you that document was created, but when you look into database, the document is not there.
I'm not sure how to resolve this in case of the 3rd party software though. Maybe instead of just using a plain BAPI you will need to write a custom function module, which will capp BAPI and do COMMIT.
Hope this helps.

Integrating SAP HCM with third party Access Control System

Hi Experts,
We have client using SAP HCM and intend procuring an Access Control Solution to manage her people.
What the client wants to avoid though is having to create a new employee in SAP HCM and manually creating same in the Access Control Software. Is there a way this can be automated such that upon recruitment of new staff, the data is updated in the Access Control DB which uses MS SQL? If this is possible, what is required to get this working well.
Thanks for your support in this regard.
Regards
John

For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
I hope this answer will help.

Integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?

What is the best way to integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?
Details about expected process Flow.
Receive PO from customer into SAP > SAP SD creates Sales Order > ?? SAP Integrate with External non-SAP Purchasing Application to trigger purchasing > External non-SAP Purchasing Application creates PO, Ships Material to Customer Ship to address (drop ship), Sends Shipping confirmation (FCR) & Invoices to SAP> ??Receive FCR and Invoice in SAP > ?? Initiate SAP Accounts Payable (Vendor Payments) and Accounts Receivable (Customer Invoice) > ?? Update SAP SD Sales Order with shipping status>
Questions we need to answer;
- How to achieve '??' steps from above process.
- What type of Master Data we will need to configure (Say Materials Item Category, Type etc.)
- Any standards options to configure SAP SD (Type of Sales Order)
- We certainly don’t want to trigger SAP MM Purchasing (i.e. PR, PO etc.). How can we bypass it.
- How to make statistical receipts against sales order line items so that SO status will be updated.
- How to receive Invoice and FCR from External non-SAP app to trigger AP and AR transactions.
- Are there any SAP standard configurations/ BAPIs/ BADIs available to achieve this integration.
Any inputs on above questions are appreciable.
Anand.

This question is resolved. We ended up activating purchasing module and used purchasing documents PR/ PO to integrate with third party purchasing system.
Anand.

SAP IDM 7.0 integration with third party system

Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems.

How to integrate single sign on with third party system

we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep

Integrate SAP BI with third party Java application

Similar Messages

Maybe you are looking for