Integrate SCOM memberships into SCSM

I have been using SCOM for years, and just recently started using SCSM as well. I have a CI connector to SCOM set up, and an alert connector as well. All seems to be moving along nicely. However, I am wanting to "duplicate" (without duplicating
the setup) of the groups I've created in SCOM using dynamic membership, in SCSM. ie. I don't want to re-setup the same groups and such, and have to maintain the two independently. I am using SCOM 2012 and SCSM 2012. Is there a way to get the connector to do
this for me, or another way I can automate the duplication so I don't have to maintain the two?
Thanks in advance!
mpleaf

the connector cannot do it. You can script your way out of it. The script should be created in a way so that it can maintain the user roles in SCSM.
http://codebeaver.blogspot.dk/

Similar Messages

How to integrate BW Hierarchy into Webi?

Hi Everybody,
I need to create a report based on 0FIGL_V10_Q0001 in Webi and this query has a hierarchy and i have created the hierarchy from the designer itself. In webi, when i tried to pull 1 of the hierarchy dimension with key figure, it shows no data but if i remove the key figure i can view the information. May i know what went wrong with it or do you have a details on how to integrate BW hierarchy into Webi?
Your assistance on this is greatly appreciated.
Thanks
Best Regards,
Hizam

Hi,
use the following link:
https://sapmats-us.sap-ag.de/download/download.cgi?id=SOTBBWVP5VS0BRNUJFQWYL5A6L3GXGPDJ59UKUDZMA1UVE1WOQ
(should work properly in about 10 min)
- merge the regsitry file to your BusinessObjects Server
- Restart the Services via a restart of the Server Intelligence Agent
- re-run the report with keyfigures
You should see 2 logfiles being created on the C:\ root folder
attach the logfiles to this message (do not copy past the content).
I assume the underlying BI query works fine.
Ingo

Integrate web dynpro into WEB UI

Hi,
I have a problem with integrating wd4a application into web ui.
When I set up url of the wd4a application (absolute url) as logical link, everything went ok in dev system.
But after transport to test system, application was not reachable, because absolute url linked to dev.
The second attemp was to set up the logical link to BSP application, which called absolute url to wd4a application using <bsp:call> statement in view. The problem is that this statement didnt work at all and it doesnt matter if there link to my application or to google.com.
do you have any idea how to solve this?
thanks
Juraj

Hi,
I know this method,
but problem is that I used absolute link in WEB UI customizing, tx CRMC_IC_LTX_URLS ... in case I could create my own link, everything is ok
my problem is that I dont know how to define link in this tx with relative url
or I can be solved in way that I somehow integrate web dynpro into BSP application and then set up URL in tx CRMC_IC_LTX_URLS for the BSP.
the only problem is I dont kobw how to do this
thanks
Juraj

Integrate javascript event into Oracle ADF Components

Can someone show me how to use javascript attribute, for instance onclick, in CoreCommandButton? How do we normally integrate javascript event into Oracle ADF Components?

Hi,
you already have a link. Its not an Oracle project but a project of Wilfred from Eurotransplant. Feel free to ping him directly on this or ask this question on the Forms forum, if you haven't already, where he most likely is signed up for.
Frank

Is it possible to integrate a from into salesforce?

Is it possible to integrate a from into salesforce? Does adobe or maybe this is a question for salesforce, but can the information I ask for in a created form be sent to salesforce and created into a report:?

Hi Josh has API integration been setup with adobe form central yet?
I want to automatically have them added to our campaign in GetResponse which allows API and seems to have just about every other form creater link available?
I dont want to have to export files and then re import them as this is just for daily enquiries on our website.
I also found it strange that the responses in form central have no way of directly linking to a campaign mailing list in business catalyst which is what we were using.
Why does this need to be so difficult?
In fact, I would much prefer if I could create the form in Adobe Muse and just have it save the person to our database in BC or elsewhere. But again no option to do this, which means retyping out data manually.
Id love a good solution.
thanks
Brian

How to integrate BW3.5 into Portal6.0

Dear all
I want to distribute Queries and Web reportings directly
into Portal6.0,but i did not integrate BW3.5 into Portal6.0,although i have solved SSO between Portal and BW system.My BW system and Portal release are last version of Netweaver2004, and they are installed on individual server.Could anybody tell me how to integrate BW3.5 into Portal6.0? Thanks very much.
Best regards
Alpha

hi alpha,
create an BW iview and in the name of the query string in ep simply give the url of webtemplate of ur query. save the ivew and execute the query.
check out these links
http://help.sap.com/saphelp_nw04/helpdata/en/3a/10fc3f0ac2c642e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a8/37e1082163c54abce581a54d6b771a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7f/5bfc3f8fc2c542e10000000a1550b0/content.htm - Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/ab/9659400d9d1059e10000000a155106/frameset.htm - Making Settings
/thread/92584 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee58ec90-0201-0010-b9a2-9a63740933d5 - Tips
BEx
/thread/50510 [original link is broken]
/thread/92629 [original link is broken]
/thread/62101 [original link is broken]
/thread/89034 [original link is broken]
link in sap
1 http://help.sap.com/saphelp_nw04/helpdata/en/71/a202400d67c342e10000000a1550b0/frameset.htm
2. Why to integrate.
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci974492,00.html
3. Integrating.. a ppt. (GOOD ONE)
http://www.asug.com/client_files/Calendar/Upload/7_Rapidigm%20EP_BW_Integratio
cheers
ravi

Can I integrate Lotus database into Oracle with ODI

I would like to know is it possible to integrate Lotus into Oracle with ODI.
I know that Lotus database (file extension .nsf) is not an relational database, but it is possible to extract the data from Lotus database into XML and ODI supports XML
so one solution would be to convert Lotus database to XML and then integrate the data into Oracle with ODI (Am I wrong?)
Is there another solution, where I could directly integrate data from Lotus into Oracle with ODI

IBM do provide JDBC access to Lotus Notes data. This is likely to be the best way. Google "LOTUS NOTES JDBC DRIVER" and you find links to IBM's info.

How to Create a Runbook to integrate SCOM - SCORCH - HPOM ? Please Help

Hi All,
Kindly can someone help with Orchestrator please ? I am looking to see How to Create a Runbook to integrate SCOM<->SCORCH<->HPOM ?
I am new to this , is there a template available for this ? or any part of it.? Any help is highly appreciated as i new to Orchestrator.

Hi,
you can use the Integration Packs for System Center Operations Manager (http://www.sc-orchestrator.eu/index.php/integration-packs/system-center-2012-sp1-orchestrator-integration-packs/system-center-integration-pack-fuer-system-center-2012-operations-manager)
and HP Operations Manager (http://www.sc-orchestrator.eu/index.php/integration-packs/integration-packs-von-microsoft/ip-hpom)
here.
Kelverion offers set of connectors for OpsMgr:
http://www.kelverion.com/sc-2012-operations-manager-con/.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

[svn:osmf:] 10104: Integrate VAST code into the new VAST library project.

Revision: 10104
Author:   [email protected]
Date:     2009-09-09 16:55:16 -0700 (Wed, 09 Sep 2009)
Log Message:
Integrate VAST code into the new VAST library project.
Modified Paths:
    osmf/branches/briggs-prototype/libs/VAST/.flexLibProperties
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/media/VASTMediaGenerato r.as
    osmf/branches/briggs-prototype/plugins/MASTPlugin/org/openvideoplayer/mast/dom/MASTDocume ntProcessor.as
    osmf/branches/briggs-prototype/plugins/MASTPlugin/org/openvideoplayer/mast/media/MASTLoad er.as
Added Paths:
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/loader/
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/loader/VASTLoadedContex t.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/loader/VASTLoader.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/media/DefaultVASTMediaF ileResolver.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/media/IVASTMediaFileRes olver.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTAd.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTAdBase.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTAdInline.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTAdWrapper.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTCompanionAd.a s
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTMediaFile.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTNonLinearAd.a s
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTTrackingEvent .as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTUrl.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTVideo.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/model/VASTVideoClick.as
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/parser/
    osmf/branches/briggs-prototype/libs/VAST/org/openvideoplayer/vast/parser/VASTParser.as

bringrags wrote:
We do indeed recommend replacing the osmf.swc from a Flex 4 project if you're going to use OSMF in Flex 4, but you may (will?) run into issues if you attempt to use Flex's VideoPlayer within that project. Note also that you'll need to replace osmf.swc for each individual project (or edit your flex-config.xml file to point to the updated SWC).
In terms of future plans, we are working closely with the Flex team to ensure that their next release ships with the latest OSMF version. No ETA on that though.
I have followed the recommendations and removed the old version of swc and replaced it with the release version. And so far the video and audio players work fine without errors.
But looking at the flex-config.xml I see that it still points to the old version.

    <runtime-shared-library-path>
<path-element>libs/osmf.swc</path-element>
<rsl-url>http://fpdownload.adobe.com/pub/swz/flex/4.0.0.14159/osmf_flex.4.0.0.13495.swz</rsl-url>
<policy-file-url>http://fpdownload.adobe.com/pub/swz/crossdomain.xml</policy-file-url>
<rsl-url>osmf_flex.4.0.0.13495.swz</rsl-url>
<policy-file-url></policy-file-url>
</runtime-shared-library-path>
Could you elaborate a little bit more on editing this part of flex-config.xml?
Thanks,
FTQuest

Integrate .exe files into portal

Hi SDN's,
How to integrate .exe files into portal. There is no threads are available in forum also. could u guys plz help me...
Thanks in advance

Hi Renushree
why do you want to store .exe files in the portal. Be aware there might be users with different OS which do not support .exe files.
As Michael suggested you can upload the .exe files (like any other file) in a KM repository and make them available through an ordinary KMNavigation iView.
Maybe you could explain why you want to "integrate" the files into SAP NetWeaver Portal.
Best regards,
Martin

Importing Release Record into SCSM 2012

Hi,
First of all, I am not sure if what I will ask next is in the correct channel. If i am not, please do guide me to the proper channel.
I am recently working on a project that require migration of Release Record. I am working closely with the ITIL Process Consultant team where the requirement to migrate customer existing Release Record with Activities.
I have been working with the file "Apendix A" to pinpoint all the Projections needed, and I have been using the command below to identify what is required for Release Record Projection
Get-SCSMTypeProjection system.workitem.releaserecordprojection
To my surprise, it does not seem as easy how I dealt with Change Request, where Release Record Projection does not include Activity as Target Type. Without this, i could not import a Release Record with Activity (using XML and CSV). I have also compare with
other modules that uses Activity and confirm both Release Record and Service Request does not have the Activity Target Type in its Projection.
Would anyone advice how could i import/migrate Release Record with Activity into SCSM 2012 ?
Is there a possibility for me to extend the Projection ? (crazy idea I presume)
Thanks in advance.

Yes, as you have noticed, there is a difference between these projections. The Activities need to be dynamically added. You need to count how many child levels of activities you have, and dynamically add components with sub components for each child
level so that all of the activities for the parent RR and all of their children are pulled recursively.
This sounds complicated but is not that bad if you know how to code.
Aaron explains the basics of dynamic TPs here:
http://social.technet.microsoft.com/Forums/exchange/en-US/ea159d9e-110e-453a-9cfa-64c4c4fb49b7/get-affecteduser-from-systemworkitemincidentviewslaprojectiontype
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click
here

Integrate Acrobat updates into install (Slipstream)

We use SCCM 2007 R3 in our corporate environment. We need to deploy Acrobat 10 and 11 Std and Pro. Is there a (realativly) easy way to integrate Adobe patches for each product into a single package? I don't want to install Acrobat 10.0.0 Pro, but need the latest patched version without making multiple installs.
For Adobe CS5/6 products like Illustrator and Photoshop, we could use the Adobe Application Manager Entepris4e Edition (AAMEE) to integrate these updates into one install. Baffled at why Adobe does not do this for Acrobat.

It's called Administrative Installation Point (AIP)
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/aip.html

How do I integrate Adobe Flex into Oracles Webcenter Interaction portal

We currently use Oracle Webcenter Interaction portal 10gr3 (ALUI Portal)... Does anyone know how or can provide documentation on how to integrate adobe flex into this portal.. Our portal is on windows but it is the java installation of the portal. Any help would be greatly appreciated...
thanks
Laura

While I'd still like others to chime in with anything they may know (or think), I've gleaned the following:
1)
"Oracle will support ALUI for the next 9 years and no customer will be forced to migrate off of ALUI. The long term direction is to migrate key features of ALUI into Web Center. "
2)
"Web Center will be the strategic portal offering. Customers looking to move to Web Center may get credit for their ALUI cost.
We are currently selling Web Center and ALUI as one single suite. So customers buying the suite don’t have to choose between one or the other and get both automatically.
If you are happy with the functionality in ALUI then it would make sense to stick with it till we have more details on migration path, etc."
4)
Publisher : the next release should come out (eventually). The long term direction is Oracle’s UCM (Stellent) product.

Integrate Adobe from into Webdynpro

Hi All
I like to integrate adobe form into WEB Dynpro and need to open PDF form on broser it self.
Please help me inthis. I am new to Adobe forms.
Thanks
Rama.

Hi,
see the [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/frameset.htm]
Regards, Heidi

How to get alerts out of SCOM and into a 3rd party management tool

Hi
I am creating an integration between a 3rd party management tool and System Center Operations Manager 2012 R2. I need to export alerts such as Power Off / Power On / Configuration change for both virtual machines and hyperv servers from SCOM
into our application. Our application runs on linux so I cannot do any .NET programming, however I can run Powershell scripts remotely using WinRM.
What is the best way to do this? I am aware of using the powershell cmdlet Get-SCOMAlert but is there any other way that does not involve polling?
thanks in advance

Think of Orchestrator as a "router", that will route information and workflows between SCOM, and [insert 3rd party product here]. Depending on your 3rd party product, there may be an "integration pack" for it that Orchestrator can use for out of the
box tasks.
So what's an integration pack? Well - think of it like a management pack, but for Orchestrator. SCOM does monitoring, but it doesn't know how to monitor something unless you install the relevant management pack. The management pack contains
all the rules/monitors for monitoring whatever it is you wish to monitor.
Well, an integration pack is similar in concept, except it tells Orchestrator how to interface and integrate with whatever it is you're trying to perform tasks with.
For what you want to do, there is a SCOM integration pack. This is a set of tasks that can get alerts and events out of Operations Manager (there are also tasks that can create and close alerts in Operations Manager).
From what I can imagine - you would want to get alerts out of SCOM when they happen (so you would use one of the SCOM orchestrator tasks to "get alert if status = new, and source = myapplication"), and then you can pass that alert to another task - such
as write it to a CSV file or something. You could then have another task that picks up that CSV file, and passes it to your application where it can be captured. Or you could use the CSV to populate variables in a powershell script, and then powershell
that information into your app.
There are many ways you could do this, but I do believe that Orchestrator would be the better option.
http://www.dreamension.net

Integrate SCOM memberships into SCSM

Similar Messages

Maybe you are looking for