Integrate the Crystal Reports 2008 SP1 with SAP R/3

Hi Experts,
I have a requirement to integrate Crystal Reports with the SAP R/3 . I'm new with this kind of integration and need help because I need to create a report based on the R/3 data.
I have read some posts from this forum especially on the integration kits - SAP forum but still don't have any idea on how to do it?
I already installed the BusinessObjects Enterprise XI 3.1 and also Crystal Reports 2008 SP1. I also download the Integration Kits -SAP installer from the SAP Marketplace but when I tried to installed it, I get stuck because it need information for BW publisher.
As for your information, we don't use any BW server because we only use R/3.
Can anyone help me where to start on this integration?
Thanks,
-Syahida-

Hi Stratos,
You're right regarding the transport files. My basis team able to transport that file but when I try again to connect from Crystal Report to R/3, it come out with other error like " Connect to SAP gateway failed" and " partner 202.171.46.161 :3300 not reached"
What I did were :
a) Click on blank report
b) Create New Connection
c) SAP Tables, Cluster
Did I do any wrong here because the error cameout after I did all the step above ? When I look out on the error, it seems like it need to use port 3300. Is there any specific port required for the integration? This is because if the integration through SAPGui, it should used port 3200 and if go direct using SAPRouter, it will use port 3299.
Really need your expertise here or any document that I can refer because the standard document for integration kit for SAP did not mention anything about the port.
Thanks and Regards,
-Syahida-

Similar Messages

Crystal Report 2008 included with SAP integration Kit

Hi
We want to know the crystal report 2008 come with SAP integration Kit

Take a look into the following document:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948
It might help.

How to connect Crystal Report 2008 server with SAP BI/BW server

Hi ,
I have downloaded the 60 Days trial version of "Crystal Report 2008 Server' from sap site to my machine. Now i would like to connect this Crystal server with SAP BI and want to use the data of BI Bex queries and Infoproviders.
Can you please guide me how to connect them?
Aslo how can i get the free trial version of Intergration kit ..here please provide me the entire full path of site(to download the Integration Kit).....
Any inputs would be appreciated!!
Regards,
Naween

Hi Michelle,
Older versions of CR would allow you to run CR from a network share point but you still had to have a license for each user. Current versions of CR do not allow you to do this any more, possibly using a Citrix or Terminal Server would allow this but you still need a license for each user. Older versions had a Network install option.
And as suggested exporting to PDF or some other format is fine for end users viewing your output. They are not using CR but Adobe Reader or Word etc. to view the reports, they just can't use the Designer to view the reports.
Hope this is clear now?
Thank you
Don

Crystal Reports 2008 SP1 Install Error 1402 on Vista 64

I just downloaded and tried to install the Crystal Reports 2008 SP1 and when I try to run the setup I get a error 1402, could not open key error and the service pack rolls back. I also tried to reinstall from my original CD and I not get the same error. I have tried to run the install using the run as administrator and with Norton 360 disabled and I still get the error. How do I correct this problem so I can update and correct my version of Crystal Reports 2008 Pro?

Hi David,
The link above seems to only refer to deploying runtime. I suggest you un-install Crystal Reports, go into the registry and delete all of our keys. Assuming you only have CR 2008 installed and the usual warnings about backing up or exporting your registry before making any changes:
HKEY_CURRENT_USER\Software\Business Objects
And
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
And then download a full build of SP1 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100006556612009E/cr2008v1win_rf.exe
Make sure you do have full Admin rights and check with your IT department to confirm they have not modified the local Administrator profile.
SP1 is DEP aware so it's not required to disable it.
Before you do all of the above You may also want to copy the SP to your local PC rather than running it from a network share point. Network delays can also cause issues like this.
Thank you
Don

Crystal reports 2008 SP1 missing in BusinessObjects Crystal Reports website

We have used Crystal reports 2008 as a reporting utility in our application and have released our product last year. During our release the latest software available was Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7 and same was mentioned in our documentation as mentioned in BELOW.
The current supported version of Crystal Reports is Crystal Reports 2008 with
Service Pack 2 and Fixpack 2.7. The installation sequence is as follows:
1. Install Crystal Reports 2008 base.
2. Install Crystal Reports 2008 SP1.
3. Install Crystal Reports 2008 SP2.
4. Install Fixpack 2.7. This can be found under the hotfix section on the web site.
Questions
1) Now the issue is that, Crystal reports 2008 SP1 is NOT available for download in the "Business Objects u2013 Crystal Reports Runtime Packages". Why was it removed? Any clue? Without this our instructions doesn't hold good.
2) If Crystal reports 2008 SP1 will NOT be available any more then what is the equivalent installable for "Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7" to be used? Can Crystalreports 2008 SP3 Full Build + Fix Pack 3.3 be used instead of "Crystal reports 2008 base + SP1 + SP2 + Fix Pack 2.7" ?
Pls Clarify.

Hello,
Download Service Pack 3.0 full build: https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
and then Fix Pack 3.3: https://smpdl.sap-ag.de/~sapidp/012002523100016815822010E/cr2008fp33.exe
Then you and your users don't need to go through all of those upgrade steps.
Thank you
Don

Japanese language pack for Crystal Report 2008 SP1

Hi Team,
this is SAP Internal IT Support Center.
my id is C5101216.
just want to know that where i can download the japanese language pack for
Crystal Report 2008 SP1.
Thanks.
もし日本語のバージョンがありましたら、ぜひ教えて頂きたいですが・・・
宜しくお願い致します。
Edited by: Guanghua Li on Dec 17, 2009 9:33 AM

Japanese language pack has already been included in Crystal Reports 2008 SP1. You don't need to apply Japanese language pack individually.

How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

Hi All,
Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
can you please help on this and if document please share.
Thanks,
Rajesh

Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

Dear All,
I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
Crystal Reports 2008 Reference [original link is broken]
I have also searched it but unable to find it. If anyone has this, kindly share it.

Hi Iqbal,
There is a service pack in the following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
There is a fix pack 03 included in the folder, I don't know if this is relevant.
Cheers

Out of Memory issue in crystal report 2008 SP1

Hi ALL,
I am facing serious issue in crystal report 2008 SP1.
When i am click the page setup in crystal report 2008 ,it is prompting like "Out of Memory".
Because of this i am not able to see the default printer in the page setup.
Please give the suggestions to resolve this issue.
Thanks and Regards,
Vinay

Hi Ed,
What printer are you using as your default printer?
What happens if you change your default printer to Microsofts generic print driver? Only as a test to remove the printer being the cause.
Also, Go into Page Setup and check on Dissociate Printer..... and see if that fixes the issue.
Also, include all your OS version and patch level, Status of DEP, anti-virus turned off ( disconnect from your network while doing this test ) and Windows Firewall or any third party firewall and close all other software running.
Thanks again
Don

Failed to Install the Crystal Reports 2008

Post Author: cechow
CA Forum: Crystal Reports
Hi,
I am facing some error message when installing the Crystal Reports 2008 that I have purchased. I am currently working on a Windows XP Pro SP2, 1 GB RAM, 60 GD Free Space to install the Crystal Reports but failed. The error stated on the Crystal Reports installation screen is "Crystal Reports 2008 Setup has Failed".
Thanks.
Adrian

Post Author: cechow
CA Forum: Crystal Reports
Basic Template
Product: Crystal Report 2008
Version:
Patches Applied: I'm not sure what patches need to be installed
Operating System(s): Windows XP Professional SP2
Database(s): SQL Server 2000 sp3a
Error Messages: Failed to INstall the Crystal Reports 2008.Steps to Reproduce: When I entered the CR disc in the CD ROM, there was no auto-run, then i decided to browse into the CD and execute the Setup.exe which then prompt the error above. Please advise.Is there some Pre-requisites that I need to install, any JRE or some other application?

Using Crystal Reports 2008 SP3 with the Brother 9500PC, 9700PC, and P9800PC

We have using Crystal Reports with the Brother Label printers for years until we were forced to use Crystal 2008. The label printers have worked in the past and we usually create a label template in the printer driver and this configuration is stored in the Crystal Report. These label printers can use several different size cartridges. When creating a report using the Editor, the report displays and prints correctly using the template embedded into the report. This is using the updated SP3.3 service pack. The problem is in the Run Time application that is embedded in another application to run the reports. When printing a label from the application, the report previews just fine with the correct size and format. However, when you try to print the label, the run time driver ignores the template embedded in the report and instead uses the default settings for the printer driver. So, if I have a 1 inch cartridge in the printer, and the default settings for the printer is a 1 1/2 inch cartridge, then the report will try to print assuming there is a 1 1/2 inch cartridge which will cause the application to fail. This is a problem with Crystal 2008 (12) and we would like to find a solution to this. Thanks, Doug

Hi Cameron,
You can setup custom label sizes in Crystal. In the folder where you installed Crystal Reports is a text file called Labels_en.txt. This contains the label definition Crystal uses. You can add a new label in here.
Now when you open Crystal and create a new report by selecting the Mailing Label Repotr Wizard, you will see your new label when you get to that step.
When save a report, the report will do two things. If you have set the report to a specific printer, Crystal saves the printer and paper settings inside the RPT. When the print engine runs the report, if it can't find the printer saved in the report it will default to the default printer.
What I believe is happening is the application is loading the report and because it can't find the label printer it was designed with it's going to the default printer. So you do have to set the PrintReportOptions in your application to redirect the report to the correct printer, driver and papersize.
This has pretty much been the way since version 4 that I can remember. The positive side is you don't have to set all the parameters yourself. You can get the PrintReportOptions from the report when you open it. Then you just need to pass the printer name, driver and port. The rest of the options (papersize) will already be populated from the Get.
Good luck,
Brian

Crystal Reports Dynamic Parameters with SAP Business One

Okay, I've got this very strange issue with dynamic parameters in Crystal Reports connected to SAP Business One.
Let's start with the software versions:
- Crystal Reports 12.3.0.601
- SAP Business One 8.8 (8.80.231) SP: 00 PL: 13
- Windows XP SP3
(SBO Server on Windows 2003 and SQL 2005)
What I'm about to describe is something I've tried in several reports and for which I created a very, very simple test report to see if it was reproducible in a very simple situation.
- I connected to a Business One server through CR's SBO connection type. Logon is successful, tables are shown.
- I pick OCRD and plac CardCode and CardName in the details section on the report. Previewing the report shows data.
- I create a dynamic parameter on CardCode and in the Select Expert I select the CardCode field and define that that should be equal to the parameter.
- I preview the report again. Now it asks me in such a parameter screen for logon credentials. It shows the server and database it tries to connect to and in the username it shows the SQL Server username I used to connect to the SQL Server in the first place. However, the password for that user is not accepted. I also tried to login with the Windows administrator user and with the SBO manager user, but no success with any attempt.
I also tried to add a static parameter and add all database values to the list. Same screen, different result:
Crystal Reports 2008 wrote:
Logon Failed.
Error in File UNKNOWN.RPT:
Unable to connect: incorrect log on parameters. (rptcontrollers.dll)
(On a side note: the report is saved as report1.rpt)
Anyone else got similar issues and found a solution?

Hi,
When you have fixed your crystal installation following the note posted earlier, please take a look at the [how to guide|http://service.sap.com/sapidb/011000358700000882232009E.pdf] and also at the [e-learning|http://service.sap.com/sapidb/011000358700001370262010E] about SAP Business One 8.8 and Crystal Reports.
There are so called "tokens" which you need to use instead of dynamic parameters.
Dynamic paramters don't work in SAP Business One 8.8, if they are not defined as a static paramter with token.
Best regards,
Darius

Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
I am a newbie at development in visual studio. Any help will be highly appreciated.
Thanks,
Rajib

Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
Look in the registry for HKLM\software\business objects and remove the business objects entry.
Download CR 2008 from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup

The Crystal Report (CR) add-on SAP 8.8

Hello everyone,
were can i finde the The Crystal Report (CR) add-on 2008 for SAP 8.8 or is this the same like the Add On for SAP 2007?
Is there such a Add On for 8.8 ?
Thanks and regards,
Indira

Hi Michael,
Is it compulsary to load the loginifo through ini file ?I can not get inifile class even in 2005.I tried this code instead of inifile,
Dim logOnInfo As CrystalDecisions.Shared.TableLogOnInfo
        Dim tbCurrent As CrystalDecisions.CrystalReports.Engine.Table
        For Each tbCurrent In rptDoc.Database.Tables
            logOnInfo = tbCurrent.LogOnInfo
            With logOnInfo.ConnectionInfo
                .ServerName = "MMCPL-SAP"
                .UserID = "sa"
                .Password = "sa"
                .DatabaseName = "MMCPL_0708"
                .DatabaseName = "Training_Test"
            End With
            tbCurrent.ApplyLogOnInfo(logOnInfo)
        Next
But it gave error as login failed.
I have created a crystal report using xsd file.I am calling the rpt file using u r code on the print event.Is this the correct way to create report in SBO ?

Crystal Reports 2008 crashes with blanked out areas when downloading data

We have a pc installed with Crystal Reports 2008 v1 SP2, which is used for report creation, but after a few minutes of downloading data from the server to populate the report, the report crashes with black areas instead of data in the report. Please can anyone offer possible solutions?
Pc: workstation
Os: Microsoft Windows XP Professional 32 bit
Processors: 1 Intel Core(TM) i5 CPU 650 @ 3.20 Ghz
Total Memory: 3264 Mb
Total Hard Drive: 298 Gb
Display 1680 x 1050 pixels 65536 colours]
Display Adapters: Microsoft 4.0.5733.0
driver date: 2-28-2007
Crystal Reports version: 12.1.0.883
Crystal Reports 2008 SP2
Oracle in OraHome111
file version: 11.1.0.6.0
driver_ODBC_Version: 03.51
connects to remote server on site with Oracle 11g database, via above ODBC driver.
Many thanks, any ideas would be appreciated!
David

Hi David,
I've seen this before, your Video driver is out dated and you need to update it. Typically the makers of the mother board or video card, which ever one you are using, will have updates for your specific OS. Appears you are using the default Window generic video driver which may not support what CR requires or you have an older usp10.dll. You will likely get a new one if you install Windows XP Service Pack 3.
Also, Crystal Reports version: 12.1.0.883 is SP 1 and not SP 2., second number is the Service Pack, 12.x.x.x.
Download SP 4 and see if that may help:
https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
Or incrementally:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
And you may need SP 3 or if you want to start off clean download the full build of SP 3 and then SP 4. Requires the keycode so make sure you have it, we can't give you a new one.
Don

Integrate the Crystal Reports 2008 SP1 with SAP R/3

Similar Messages

Maybe you are looking for