Integrate two Solution Manager to the one

Hello!
I have the following question:
We use at the moment one Solution Manager with the functionality MOPZ and Service Desk. We use the other one Solution Manager mainly for the RZ-Systemmonitoring.
<b>We are about to think, whether it is possible to integrate the both Solution Manager to the new one.</b>
<b>Can some one give a short feedback with advantages/disadvantages and risks.</b>
Thank you very much
regards
Thom

you can do that of course but there is no automatism do do that. You will need to do either configuration of MOPZ again - or re-setup your system to use a different system as CEN.
Markus

Similar Messages

Syncronizing two Solutions Manager with One SLD

Hello Experts, we have this issue: I am having one Central SLD in PI and one productive Solution Manager (new one) that is pointing to that SLD, for incidents we are managing another ¨productive¨Solution Manager (old one) . There is a new system that I need it in my SMSY in my old Solution Manager and the best way to do it would be to point that old Solman to the same SLD that the new one is pointing. my question is: I only have to set the SLD in the old solution manager in the RZ70 and add that Solution Manager in the Central SLD?, so I would end with two solution manager pointing the same Central SLD, it doesnt mess with my new productive Solution Manager SMSY?, I want to be sure that some trash data in the old Solution Manager wont be present in the new Solman that is pointing the Central SLD right now.
Best Regards,
Paul

Dear Mr. Paul,
There are few things to understand:
1. RZ70 is used to feed SLD with system information.
2. landscape fetch job need to be scheduled within Solution manager system to update SMSY with the latest information available in SLD which you have configured during SOLMAN_SETUP.
Here with your description it is clear that you have central SLD at your PI system and your both Solution manager system ( New and Old) are connected to the central SLD.
Here what I understand if you want to add a new system say X in SMSY of your old solution manager.
In order to do so you need to configure your new system to the central SLD using RZ70. Once you did this, system details of your new system would be available with central SLD.
Now in next step to make that system available to your old solution manager, you need to rerun the smsy_setup job. This will referesh your SMSY and new system would be available in SMSY of your OLD solution manager.
In this case there is a catch. Since you have added the system to the central SLD, the new system X would also appears in the SMSY of your new Solution Manager as well once SMSY of new solman gets refreshed.
So if you just want to add this new system X to SMSY of your old solution manager only and not to the new one, you can add this system to the local SLD of old solution manager only not to the central SLD.
Also you need not to worry about the trash data available in your Old solution manager. It would not effect the central SLD if your local SLD of old solution manager is not synch with central SLD.
Regards,
Sachin

Ideas for integrate two landscape that individually has one XI system

does anyone have the Ideas for integrate two landscape that individually has one XI system?
our scenario is: in one customer side we have a xi as integration approach, and the other one also has one xi, we need to integrate them two landscape together
and use one of the xi server as a central access points.
my concern is : is it a good idea to reach this goal ? since this is a
task like; app in landscape 1 ---> xi1 -
> xi2 ---> app in landscape 2
are there any other solutions ?
thanks a lot !!

Hi
I guess its a XI-XI Scenario.You need to integrate two XI's
For Reference
XI to XI communication
idoc to file scenario
Thanks

Connect two Solution Manager systems.

Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike Geluk

Hello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme

Master Data synchronisation between two Solution Manager systems

Hi all,
does anyone know if it is possible to synchronise master data (smsy, ibase and such) between two Solution Manager systems with standard jobs?
Thanks!
Regards

I asked a likewise question on the OSS earlier and I was told
"Use MDM" (which is a separate product and must be licensed separately).
Markus

Can you have two slides shows on the one interactive page?

I'm just new at learning interactive pdfs in indesign so sorry if this is common knowledge. I know how to create a slide show on a page, but can you have two slide shows on the one page or more for that matter? (Ideally I need 3.) Each slide show has its own set of images and buttons.

Just :http://www.youtube.com/watch?v=Dm0aeMUPZ4U
But I'm happy to create them a different way if needed be.

Configuration EWA in clien with two solution manager

Hello
I have a question I am activating EWA ¡on SOlman but I have two solman fo the same company, el first is for management r3 system and second is for management xrpm,bw,portal system.
The EWA is running in the first solman, and the saprouter I think is here too. So I want to activate the EWA in the second solman in the guide I have this note 33135 an this talks about connetion with SAP.
Is possible that the EWA in two solman for the same client.
Addionaly the Should the rscctool report run in the satellites systems too?
Thanks
DS

Hello Danny,
There should be no conflicts providing you keep a few things in mind.
On the Satellite, in SDCCN > Setting> Task>Specific> RFC Destination
Please make sure that you define one Solution Manager system as the Master. This will be the Solution Manger system that will schedule an SDCCN EarlyWatch Allert task automatically on the Satellite, throught the Maintenance Package, so it needs tol be the one specificed in the Mainatence Package task. In other words you set up the recommended EWA Activation as documented at http://service.sap.com/ewa for one Solution Manager system.
Then for additional Solutioin Manager systems you would create an SDCCN Task in the same way you would generate an ad hoc EWA report, only you would choose the RFC Destination for the second ( and/or subsequent) Solution Manager systems, and you would specify it as a periodic task so it would reschedule itself each week, so to affect automation of the sending of the SDNNC session data to the other Solution Manager Systems.
This way you will not have conflicts between the solution manager systems.
Regards,
Paul

Question about how to connect two solution manager

Hello experts
one of our clients wants to connect his SOLMAN to our SOLMAN, that way
when they receive a case in his ICM we can monitor the case and respond
It, if the situation requires or they ask for our help.
Can you please tell me if theres a way to connect them and what is the
best way to do that?
Thanks for your help,
Regards,

You are going to connect a Solution Manager to another Solution Manager, so I think it is enough to use the RFC destination on the connection.
I suppose you want to send a message from 7.0 to 7.1, so you may:
In Solman 7.0 system:
1. T-code SM59   > Define an RFC connection to 7.1 system;
2. T-code ICTCONF   > Add an entry for the 7.1 service desk, specify
the RFC Destination as the one you defined   > Activate -> Generate default value mapping (you may find the button on the top of ICTCONF).
In Solman 7.1 system:
1. T-code SM59   > Define an RFC connection to 7.0 system;
2. T-code ICTCONF   > Add an entry for the 7.0 service desk, specify the RFC Destination as the one you defined   > Activate -> Generate default value mapping;
3. Customize your own value mapping including the transaction type. You will find the details in:
    IMG -> SAP Solution Manager -> Capabilities (Optional)    -> Application Incident Management (Service Desk)    -> External Integration -> External Service Desk
Most fields of SIVA and SMIV are the same (for example, priority) so you do not need to care about the value mapping if you do not have special requirement. However, some fields only exist in SIVA category, subject) and others only exist in SMIV (multilevel categories). You may need to implement your own code according to your requirement.
Thanks
Vikram

Can there be two itunes librarys on the one computer?

I am giving my PC to my parents and we will share it for a few months until I get myself a laptop. Both my mother and I have ipods and we both have separate itunes libraries. Is it possible to have both the separate libraries on the one computer - I guess under our separate user names and it not interfere with each others library? Will opening itunes under our separate usernames bring up the correct libaray?
Thanks

Yes you can have more than one library. The simplest thing is to have two separate user accounts then things are kept entirely separate:
This article may help:
http://support.apple.com/kb/HT1495?viewlocale=en_US

How to set Solution Manager mail the EWA reports

Could anyone suggest me how to setup email for getting EWA report

Hi Bill,
       1. I would assume you have already configured Early Watch to report to Solution Manager.
        2. SCOT configuration done and e-mails can be sent out.
        If so,
       Go to --> Solution_Manager --> and Go to the solution --> Edit --> Automatic E-mail transmission
       and give the e-mail addresses there.
Hope this helps,
Regards,
Krishna

Can I create two entity manager factoris in one app?

I need to develop two projects, both need JPA access to same data source.
One is an web project, the other is java se project. And web project needs to the some methods inside java se project.
I created two separate JPA set(persistence.xml and entity classes). Both project can run separately however, if I call the methods inside java se project from the web project.
entity manager inside that project won't be created successfully, says error:
oracle.toplink.essentials.exceptions.DatabaseException Internal Exception: java.sql.SQLException: No suitable driver found
I am very confident that mysql driver lib has been added for both projects.
Does anyone know what is wrong here? Thanks!

Yes. Reduce the number of FDM applications you are creating. You can have multiple target system adapters in a single FDM application (i.e. a single database only required). There is no need to create a new application for each target system.

Putting two OSX's on the one drive...

I have just bought a macbook pro and still have my Powermac G5 and am now straddling the intel/powerpc fence.
I have an external firewire drive that I use as a diagnostics drive on which I have installed OSX and a couple of troubleshooting apps (diskwarrior and techtool pro primarily).
Now I think I'm going to need both intel and powermac installs of the OSX... What I'm wondering is.. can I do it without partitioning the drive?
Chris

Apparently, even though Apple doesn't say it is supported, Intel Macs can boot from an Apple Partition Map (APM) partition scheme. (This was discovered when some folks noticed Intel iMac DVD disks used the APM scheme.) PPC Macs cannot boot from a Partition Table (GPT) partition scheme. Some people have had success exploiting this 'dual boot' nature of Intel Macs to make a universal boot FireWire drive using the APM scheme.
This usually involves repartitioning the drive with two OS versions (Intel & PPC), each on its own partition. (Some ambitious souls have managed to make "universal" OS versions that avoid the two partition requirement, but this has some undesirable consequences, so avoid it if you can.)
The general idea is straightforward:
1. Use Disk Utility's "Partition" tab to format the Firewire drive in the APM scheme, creating two HFS+ partitions (the drive will be completely erased).
2. Boot from a PPC Mac & install 10.4.x on one partition, using a PPC install disk.
3. Reboot from an Intel Mac & install 10.4.x on the other partition, using an Intel install disk.
The "extraordinary measures" come in at step 3, because the Intel installer won't let you install the Intel version of the OS on an APM scheme drive. The workaround is to restore the Intel OS version to the partition using Disk Utility's "Restore" tab. Probably the best way to do this is to install a fresh copy of the OS to an internal partition of an Intel Mac (or to any GPT partition), make a disk image of it, & use that image as the restore source.
In theory, you should be able to use cloning software to copy your working Intel install to the second partition, but this doesn't seem to be an approach anybody has discussed much.
However you do it, you will have to select the correct version of the OS at startup (using the Option key, for instance) for each mac. If you try to start up an Intel Mac with the PPC version of the OS or visa versa, the Mac will crash. This doesn't harm anything (or so they say), but to keep things simple, name each volume with something distinctive (like "PPC Boot" & "Intel Boot"), since your startup choices won't necessarily tell you which is which.
Note that I haven't personally tried this, only read about it (since I will someday want the same capability). Mention of the technique first appeared about a year ago but I have seen nothing since to suggest it still isn't viable. To be on the safe side, check your Intel DVD disks to see if they are APM, which should be a good indication that your Intel Mac will boot from the hybrid FireWire drive. (In Disk Utility, select it & its partition scheme will be shown at the bottom of the window.)
You can read more about this technique at (for example) rentzsch.com: Intel-based Mac Boot Incompatibility or Macs on Intel: Boot Issues. An interesting variation on the universal OS approach can be found at macosxhints.com - 10.4: Create a single Universal binary bootable disk.

I'm trying to redownload my music onto a new computer and its not working..I think I may have two accounts open because the one im signed into is empty and I cant remember my log in info..and when I reset it it doesnt help.

I got a new lap top and I was trying to re download my music to the new one and it's not working. I think I may have to accounts open because its saying mine hasnt been active in a while and I know thats not true...and there is no music in the library it's all empty...is it possible to have two accounts open? if so how do I cancel one. and keep the other....

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

Connecting two BW systems to the one R/3 source system

Hi all!
I have to connect two BW Systems to one R3 system. In our last tests we have had problems trying to connect two BW servers simultaneously with R/3 source system because it allows only a logical system name for each R/3 client, and (We guess that we need to define tow diferent logical system name, one for each connection). This has been generating errors when we try to load data from R/3 to BW because, we guess, R/3 does not recognize the BW source system in the ALE connection for someone BW systems at transfer data. In this moment I have one connection active (BW1-R3). The BW2-R3 connection is already inactive. Does anybody know how perform this? we need solve the transfers problem as soon as possible.
Thanks! Judi

Ah...
please don't post twice the same question...in these forums we are always the same !!!
You can close this thread to avoid to look in two different posts...
Bye,
Roberto

Solution Manager error "The termination type was: RABAX_STATE "

Hello All,
I was tasked with setting up security for our new SAP Solman Project Managment solution and ran into the following errors while testing.
BACKGROUND:
User type was application consultant and was prompted by business test users that this type of user should be allowed to create issues in issue management but not allowed to delete issues in issue management. Only Project Managers should. Removed the 06 delete authorization from CRM_ORD_PR auth_obj and instead of getting "you are not authorized" error message (what is expected) user is thrown to the below exception page:
===================================================
Error when processing your request
What has happened?
The URL http://##############.com:####/sap/bc/webdynpro/sap/dswp_ci_issue_management was not called due to an error.
Note
The following error text was processed in the system DM1 : An exception occurred
The error occurred on the application server sapdc004_DM1_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DELETE_CRM_ORDER of program CL_DSWP_CI_CRM_BUFFER=========CP
Method: DELETE_ISSUE of program CL_DSWP_CI_CRM_BUFFER=========CP
Method: DELETE_ISSUE of program CL_DSWP_CI_IM_MODEL_ASSIS4====CP
Method: DELETE_ISSUE of program /1BCWDY/E9JDCLCGWZ4H2NCZR2J4==CP
Method: IWCI_DSWP_CI_IM_MODEL~DELETE_ISSUE of program /1BCWDY/E9JDCLCGWZ4H2NCZR2J4==CP
Method: ON_DELETE_ISSUE of program /1BCWDY/E9JCYB3ZPWFCW42TLIUK==CP
Method: ON_DELETE_ISSUE of program /1BCWDY/E9JCYB3ZPWFCW42TLIUK==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/E9JCYB3ZPWFCW42TLIUK==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_COMPONENT===CP
Method: FIRE_EVENT of program CL_WDR_COMPONENT==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapdc004_DM1_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server sapdc004_DM1_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: TRAIN30 -l: E -s: DM1 -i: sapdc004_DM1_00 -w: 1 -d: 20111011 -t: 140639 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
==================================================
Ran ST22 and reviewed the following dump:
=====================================================
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_DSWP_CI_OBJECT
Date and Time 10/11/2011 14:06:39
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_DSWP_CI_OBJECT' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_DSWP_CI_CRM_BUFFER=========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
=================================================================
I did some searches on possible notes but none seemed to be appropriate and I would like to get as much information as possible before sending this over to the Basis team for resolution.

To solve this issue please make sure that
The version of your ABAP and JAVA stack are in your system as per
this note 1274287 : End-to-End Diagnostics SP18(EHP1)- SP19 - SP20
Best Regards
Jai wardhan

Integrate two Solution Manager to the one

Similar Messages

Maybe you are looking for