Integrate Web Dynpro Application into a Guided Procedure Step

hi guys
I would like to integrate my Web Dynpro Application into a GP-Step.
I DON't want a:
- Web Dynpro Component (GP Interface)
- Composite Application Web Dynpro Component
I think I have to use "Web Dnypro Application" from the callable objects list.
However, I couldn't see any input parameters.
Thanks for your help.
Regards,
Go:khan

Hi Gökhan,
in my mind you only see Input/ Output Parameters within a Web Dynpro Application when you use the GP Interface.
WHen you want to have some for parameter mapping, you must implement an Web Dynpro Application with GP connectors.
Take the following tutorial to do that.
Hope it helps
Bye Steve

Similar Messages

Using an other web dynpro application into an actual application

Hello,
I have a web dynpro application into a developer component previously developed. I want to import it an another web dynpro application.
The goal is to click a button, display the window of the other application and then once it is finished, go back to the first application (with some context parameters)
Is it possible ?
Thanks
Quentin

Hi,
Solved same issue in this thread Re: Data transfer between two different Web Dynpro components
PradeeP

Deploying web dynpro application into portal

hi
I have created a simple example in webdynpro in Netweaver developer studio, and I have deployed it into the portal whose version is EP6 SP9.
where can I see that deployed webdynpro application(in my case it is WebDynpro_Basics.ear) in the portal.
Can any one tell me the navigation part in the portal.
thanks
krish

Hi Krish,
You will find the deployed webdynpro application in webdynpro content administrator. You have to access it using portal administrator user-ID. the url is:
http://<hostname>:<J2EE engine port>/webdynpro/welcome
If you want to display the webdynpro application as an iView in the portal have a look at the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/d8/6ee03fc2269615e10000000a155106/frameset.htm
Regards,
Aniket

Start transaction in Side Panel Web Dynpro application into NWBC

Hello experts,
I want to start a SAPGUI transaction out of a Side Panel of another transaction.
e.g. in transaction A I have the Side Panel AA in which I want to click on a Link/Button (a action) to get to transaction B.
How is it possible to realize this?
Kind regards,
Eike

NWBC - New Tab instead of window

Integrate web dynpro into WEB UI

Hi,
I have a problem with integrating wd4a application into web ui.
When I set up url of the wd4a application (absolute url) as logical link, everything went ok in dev system.
But after transport to test system, application was not reachable, because absolute url linked to dev.
The second attemp was to set up the logical link to BSP application, which called absolute url to wd4a application using <bsp:call> statement in view. The problem is that this statement didnt work at all and it doesnt matter if there link to my application or to google.com.
do you have any idea how to solve this?
thanks
Juraj

Hi,
I know this method,
but problem is that I used absolute link in WEB UI customizing, tx CRMC_IC_LTX_URLS ... in case I could create my own link, everything is ok
my problem is that I dont know how to define link in this tx with relative url
or I can be solved in way that I somehow integrate web dynpro into BSP application and then set up URL in tx CRMC_IC_LTX_URLS for the BSP.
the only problem is I dont kobw how to do this
thanks
Juraj

Problem with HowTo guide - Use the BI Java SDK in a Web Dynpro Application

Hello,
I am following the HowTo guide - Use the BI Java SDK in a Web Dynpro Application
at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e49be590-0201-0010-0c83-fc20e5da124f">this link</a>.
I have configured the connector on the WAS as needed.
The problem is that when I run the application I receive an Unauthorized error on the connector URL.
If I open this URL on a browser I receive a pop-up for UID and PWD and when I enter the same UID and PWD I used to configure the connector I am able to login and see the WSDL.
Any ideas?

I've never tried using BI in WebDynpro !!!
But i foond one posting on the connection problem https://forums.sdn.sap.com/click.jspa?searchID=955524&messageID=2133396
Regards,Anilkumar

How to inject external configuration into web dynpro application

Hi colleagues,
I've a web dynpro application, which has some hard coded hostnames in the source code.
All hard coded hostnames should be moved to some else place, either engine parameters or external configuration file.
Searching over the project, hard coded hostnames were found in following file types:
- wdmodel files
- properties files
- java files
How to inject external configured hostnames into web dynpro applications, especially wdmodel and property files? Are threre best practices?
Thanks for any hint!
Best regards
Daniel

property file is supposed to do that job, you can configure the value at nwa after the application is deployed.
Configuring a Web Dynpro Application (Java) - IT Scenarios at a Glance - SAP Library

Is there a simple way to incorporate web dynpro applications.............

.......using Adobe Interactive forms with Guided procedures??
Hi all,
Sorry the question was so long I had to continue it.
So here is what I'm asking in detail. The scenario is to be able to incorporate an Adobe Interactive form (online and offline) in a guided procedure. Now, from my experience I think a guided procedure doesn't display a pdf document during the workflow process unless it consumes a web dynpro application which has an adobe form embedded within it. In this case I want the user to be able to download the adobe form from a process initiated by the guided procedure. 1) The user should be able to save the adobe form and fill it in offline. 2) Then the user can submit the form for approval (again a step in GP also), 3) if the form is approved the GP should inform the user and have the other relevant fields of the form filled in by an RFC invokation. 4) The user can see the new form. Steps 3) and 4) are no problem. Its the in between approval step that is posing a problem. How do you tackle the part of filling in the form and re-submitting it to a web Dynpro app that will fill in the required fields IF and ONLY IF the form is approved as part of the workflow??
Any tips or suggestions will be greatly appreciated.
Thanks in advance
Kunal.

Hi Kunal,
Please have a look into this following links which can give you little idea about
1. <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a01d8da5-22f0-2910-e9b2-aa7cc9d3cabf?prtmode=navigate">how to use Guided Procedure with SAP Interactive Forms by Adobe.</a>
2. <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e99cff7a-0601-0010-dea3-e8166c7a7f20">My First Form Process in Guided Procedures</a>
3.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9ea34c2-0701-0010-e2a2-d8e9cd6d85dc">Configuring Guided Procedures for Interactive Forms</a>
I hope all these links will give you a better idea.
Thanks and Regards
Avijit Dhar

Error - Creating a Web Dynpro Application Accessing ABAP Functions

Dear All,
we are trying to implement a web dynpro application with accessing ABAP functions.
Previous tasks:
-     insert the ABAP system into the SLD from the NWDI System (Transaction RZ70; the ABAP system is correctly insert into the SLD => technical systems)
-     equipped the JCO connections with the web dynpro content manager (ping and test = OK)
Its the standard tutorial out of the SDN called Creating a Web Dynpro Application Accessing ABAP Functions.
Some hints:
-     There are no errors after the implementation and the rebuild of the project in the NWDS
-     The auto deployment works fine to the development runtime system. The application is shown in the Web Dynpro content manager
-     The In the build log I found these entries:
System.err] [Invoked from com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:585)]
[System.err] java.net.UnknownHostException: FRASAPP562: FRASAPP562
[System.err]      at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
[System.err]      at com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:575)
[System.err]      at com.sap.s2x.tools.GUID.<clinit>(GUID.java:179)
[System.err]      at com.sap.s2x.tools.S2XGUID.getGUID(S2XGUID.java:19)
[System.err]      at com.sap.ide.metamodel.core.i18n.LanguageState.createS2XID(LanguageState.java:191)
[System.err]      at com.sap.ide.metamodel.core.i18n.S2XLanguageUnmarshaller.unmarshal(S2XLanguageUnmarshaller.java:52)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.loadLanguageState(TextPoolProxy.java:703)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.prepareLanguageForRead(TextPoolProxy.java:646)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.isEmpty(TextPoolProxy.java:222)
[System.err]      at com.sap.ide.webdynpro.checklayer.MDOChecker.check(MDOChecker.java:23)
[System.err]      at com.sap.ide.webdynpro.checklayer.view.ViewChecker.check(ViewChecker.java:52)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ViewControllerChecker.check(ViewControllerChecker.java:96)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:119)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:181)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2039)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
[System.err]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
[System.err]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
[System.err]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[System.err]      at org.apache.tools.ant.Task.perform(Task.java:364)
[System.err]      at org.apache.tools.ant.Target.execute(Target.java:341)
[System.err]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[System.err]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[System.err]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:112)
[System.err]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:61)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:213)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:190)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
[System.err]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1495)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
-     Im able to start the application out of the Web Dynpro content manager with run => only the user interface is displayed without any functionality
-     The normal start over the NWDS fails => error text
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/J08_Flugdat_Daventdcflight~xxx.com' and application 'FlightListApp' are not deployed on the server. Please check the used URL for typos.
There two different URLs in use.
Start via NWDS:
http://frasapp562:50000/webdynpro/dispatcher/J08_Flugdat_Daventdcflight~xxx.com/FlightListApp
Start via web dynpro content manager:
http://frasapp562:50000/webdynpro/dispatcher/xxx.com/aventdc~flight/FlightListApp
For test purposes, we started the BAPI (BAPI_Flight_Getlist) on the ABAP system directly. It works.
Any ideas about the system behaviours (different URLs and missing functionality)?
Thanks a lot in advanced!
Best regards
Christoph

The Error has been solved The implementation of a method was missing....
Thx
Christoph

Web dynpro application using workflow

Hi all,
I have developed a web dynpro application and attached that to the portal, so the user will login into the portal and will access the application. We have a new requirement now, when a user enters the data and hit save button on the web dynpro application, the workflow should trigger and should send the filled out (everything filled in) web dynpro application to his superior, the supervisor should be able to click on a link (which he should get through workflow) and should get the web dynpro application filled in. I am not sure how can I do this, so can you please guide me through.
Thanks,
Raj

Hi Raj,
could I suggest perhaps that you have a good search of SCN - there have been multiple posts about this sort of thing in the past.
for example : the wiki article
[Integrating WebDynpro ABAP applications with UWL for workflow in Portal|http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal]
is it perhaps that you do not use the UWL at your site? Or do you want to to send an email to the manager with a link directly to the approval application? The last case is one that I've come across many times before - it just means that you'll need to generate an approval task that is ended by a wf event and send an email to the manager with a URL parameter in the launch of the WDA application so that the app can pick up the details required to display and raise the WF event to complete the approval wf task.
There are all sorts of ways of persisting the information in the form so that the manager can see it in the approval. You can use the workflow container, you can use a db table, you could even use a shared memory area (not that I'd recommend this for this usage). But this is more a case of how to persist information in a workflow and probably a better question (search first, it's probably been answered already) for the WF forum and not the WDA forum.
Good luck in designing and building your application. Perhaps when you are done you could write a blog about your experience and further share how to do this with others.
Cheers,
Chris

Web Dynpro application connecting to oracle

Hi all,
i want to create a web Dynpro application which will fetch data from oracle database.
Can anyboby guide me with some documents.
Thanks in advance.

Thanks for your quick reply!
I am trying in another way.I've created a WD application and in custom controller I've put the code for connection, copying the retrived data into context and trying to display the data in one view.
CODE:
DriverManager.registerDriver(
              new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection(               "jdbc:oracle:thin:@oracle server ip:port:sid",
     "user name",
     "password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select * from table");
if (rs != null)
while ( rs.next() )
     //code for copying data into context
stmt.close();
conn.close();
Error(No class defination found) is at first line i.e. new oracle.jdbc.driver.OracleDriver().
I've put classes.zip in lib and build path as well.
Regards,
Sarika.

Parameter transfer from one Web Dynpro Application to another

hi,
Is it true that only parameters with string type can be transfered from one Web dynpro application to another ?

hi, Justin ,
You are right , I can use inplug for the dest component , and can transfer referenced type , but now I met a problem , how I can transfer the parameter to the dest comp ?
I can use the following code to transfer a value from origin to dest , but how to transfer an object , can you give me some sample code ?
CONCATENATE l_url '?'
               '&guid=' lv_guid
               into l_url.
CALL METHOD window_manager->create_external_window
      EXPORTING
        url    = l_url
      RECEIVING
        window = lo_window.

Automate Web Dynpro Application

Hi
I was wondering if there is any way to automate the start of a Web Dynpro Application?
What I need to do is this. I need to basically poll an MS exchange inbox for a mail with a particular PDF attachment and then, if found, upload and save the data to the backend. - with as little user interaction as possible.
Does anybody know if automating the application can be done and how to do it?
Thanks in Advance
Anton Kruse

CAF Guided Procedures is one solution
[Documentation|http://help.sap.com/saphelp_nw04s/helpdata/en/33/198141f906040de10000000a1550b0/frameset.htm]
[Implemeting dynpro callable object|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50d74ada-0c01-0010-07a8-8c118d408e59]
[Access Running CAF from Dynpro|The specified item was not found.]
good luck
nikhil

Using CSS for Web dynpro application in EP

Hi,
I have some CSS (Style sheets) which I need to apply to the portal, so that all the web dynpro applications can have the same look and feel.
I read something about Theme Editor in EP. Can I somehow use that to import the CSS contents into the EP theme?
Any pointer to using CSS for Web Dynpro applications will be appreciated.
Thanks.
Puneet

Hi,
Go thorugh the follwing Web Dynpro Java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw04stack09themes.zip
To know how to use it and for the steps to be followed please follow the tutorial here
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to edit web dynpro themes.pdf
the last url gives you a step by step procedure with wizards..
Regards,
RK

Developing a web dynpro application compatible to two JCO destinations

I have created a web dynpro application and integrated into a portal, which access R/3 using a JCo destination and retieves the data using a BAPI.
But I want to integrate the same application into another portal, which would access the different R/3 system having the same function module.
Is there any way for switching between two Jco destinations as the same application could be made to work for both the systems.
please suggest me as I am stuck up with this issue.
Thanks and regards
kris

hi Radha Krishna
Thanks for your reply,
Currently I have three iviews for the complete application Can you please tell me where to do the settings:
In the application properties dothe following:
Use the following url parameter to the
application URI sap-wd-arfc-useSys=<DEFAULT_SYSTEM>:<SUFFIX_OF_MAPPED_SYSTEM>
In the default system you can change your JCo destination name.
where do I do all these settings.
Kindly let me know.
Thanks and regards
kris

Integrate Web Dynpro Application into a Guided Procedure Step

Similar Messages

Maybe you are looking for