Integrate XML GW and B2B

Hi Ramesh,
We are planning to integrate XMLGW and B2B. We are wondering about the following:
We know that we send documents to B2B using EDI X12 format. Now XML GW receives the docs using OAG format.
So, If B2B receives an 850 from my customer, will it convert that into OAG XML format and automatically load into XMLGW delivery channel (if that is used?)
Requesting your advice in this regard.
Thanks
Shamik

Hello,
The best practice is to send the message to BPEL from B2B and get it transformed into OAG XML and send it to Ebiz suite using Oracle Apps adapter. Alternatively you might want to transform the xml to OAG format using B2B callout and sent it to the XML Gateway Queues. However this is not a prefferred approach.
HTH.
Rgds,Ramesh

Similar Messages

Receiving xml file from B2B - assign the data to a variable

Hi,
I am receiving an xml file from B2B and assigning the file content to a variable.
I have a B2B adapter - mediator - bpel process. In the bpel process I am assigning the inputVariable to a userdefinedvarible.
But I am not getting the value correctly. Only the root tag of the xml is shown as the value for the userdefinedvarible.
In the composite audit level,
<process>
<scope name=main>
receiveInputreceiveInput
Sep 17, 2010 9:31:10 AM Received "inputVariable" call from partner "processorder_client"Received "inputVariable" call from partner "processorder_client"
View XML Document (******* the xml doc shows the complete xml********)
Assign_1Assign_1
Sep 17, 2010 9:31:10 AM Updated variable "Order"Updated variable "Order"
<payload>
<Order>
<orders/> (******* the variable shows only the root element********)
</Order>
Sep 17, 2010 9:31:10 AM Completed assignCompleted assign
Sep 17, 2010 9:31:10 AM BPEL process instance "40004" completedBPEL process instance "40004" completed
I have connected the mediator interface to bpel interface and did not do any other special config? Is that ok?
Can anyone please tell me the procedure to assign the xml file content from a b2b message to a bpel variable Or direct me to any samples on this?
I dont understand if the prob is in mediator or assigning? I do see the inputvariable having the complete xml...!!
Thanks in advance.
Ganesh

Hi Ganesh,
Might be problem with the parts.
receiveInputreceiveInput
Sep 17, 2010 9:31:10 AM Received "inputVariable" call from partner "processorder_client"Received "inputVariable" call from partner "processorder_client"
View XML Document (******* the xml doc shows the complete xml********)Check the part in the xml and part you defined for inputvariable.
Regards
PavanKumar.M

Adding namespace to order xml received from B2B

Hi there,
I am receiving an order xml file from B2B.
The order xml file does not have the namespace and I need to add namespace to it.
Is there a way we can achieve this?
Flow is B2B Adapter -> Mediator -> BPEL - .....
I am trying to do this in the mediator transform.(http://www.velocityreviews.com/forums/t169875-help-cant-add-namespace-using-xsl.html) But it did not work.
Thanks in advance.
Rgds
Ganesh

You can achive this by having a dummy 1-1 transformation, but there is a danger that the xslt processer might not be able to get any data from the source, in that case you need to edit the transformation source to remove the namespaces from the xPaths of sources.
Regards,
Ajay

Integrate Adobe Flex and JBOSS using BlazeDS

I using this link http://simplyolaf.blogspot.com/2009/07/integrate-adobe-flex-and-jboss-using.html to create Flex Project for Blaze DS. I added the following arguments to the flex compiler: -services "F:/java_WS/iASCUE/WebContent/WEB-INF/flex/services-config.xml" . Can I define relate path? when I put my project on other server it don't work

Does anybody something know?

Regarding A2A And B2B Integrations in SAP XI

Hi Experts,
I want to Know the Difference Between the A2A And B2B Integrations in XI.
Any one Can Please Explain me In General Words Using One Real Time Scenario.
Helpful ANS Will be Rewarded.
Regards
Khanna

Hi Rajesh ,
Today's business world is infinitely more complex than it was a long time ago.
Modern companies have a large number of applications that take care of
running the business. Such diverse applications weren't a problem initially
because they were meant to provide stand-alone, independent, and
automated functions. The result of this diversity was a collection of stovepipe
applications rather than a unified network of linked systems. But now, the
companies are realizing the utmost need to integrate these independent data
silos to leverage the information stored in them across the various vertical
and horizontal domains as well as surmount the ever-increasing costs of
building new applications.
And this is where an A2A Integration solution comes into the picture.
1>A2A Integration
A2A Integration is a collection of processes, software and hardware tools,
methodologies, and technologies. When implemented together, they have the
aim of consolidating, connecting, and organizing all the businesses computer
applications, data, and business processes (both legacy and new) into a
seamlessly interfaced framework of system components that allow real-time
exchange, management, and easy reformulation of the company's missioncritical
information and knowledge.
2> B2B Integration
B2B Integration is fundamentally about coordinating information among
businesses and their information systems.
In today's world with companies operating in a global business environment,
B2B Integration is a pre-requisite for them to remain competitive. They need
to come out of their shell and interact with their suppliers, partners, and
customers distributed throughout the world. B2B Integration enables a
company to focus on its core competencies and offload other services to
partners to gain efficiency and reduce cost.
For B2B integration in SAP Xi refer the following links .
/people/shailesh.mane/blog/2006/06/27/b2b-configuration-part-i--creating-an-integration-scenario
/people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
Thanks ,
Suvarna
Award pts if this ans helps you .

Regarding A2A and B2B applications

hai can any one give the real time example on A2A and B2B scenarios its a frquently asked question in interviews

Hi Chandrakanth,
A2A scenario means - you are sending the data across different applications using XI
Ex : File to IDoc , File to JDBC, HTTP to JDBC ,...etc...
General scenarios with in a company .
B2B Scenarios means : A company wants to integrate their systems with their business partners ( ex vendor,supplier,customer) , implicitly it means that they have to cross their fire wall for this purpose ...In B2B scenarios we need to create Party objects.
The basic difference is in B2B you have to use Party objects and Industry standards like CIDX,RNIF adapters at configuration time . Rest the scenario is similar to A2A ...there also you will be integrating different applications but you will have to cross the fire wall.
PS : Can you put all your questions/doubts in one thread rather then making n different threads for each and every doubt/Question.

What is A2A and B2B?

Hi Experts,
Please explain what is A2A and B2B senario?
Regards,
RajeshKumar

HI
A2A & B2B:
A2A is application to application. When two applications in a company communicates with each other we call it an A2A scenario and if its across Companies we call it B2B or buisness to buisness.
Consider an Car Manufacturing Company, it may use XI for integrating its ERP system with say an HR system and so on. As both systems are in the same landscape, it becomes an A2A.
Likewise, the Company might have transactions with say a Glass Manufacturing Unit or organization . When XI is used to Integrate these systems, it becomes a B2B as you use it to integrate 2 different Businesses in different landscapes.
B2B scenarios come in to picture when communication is between two Organizations or parties.
A2A - application 2 application:
this is a integration like let's say, you have 2 systems in your company: ERP & accounting system. And you want to send data from ERP to acconting system. This happens inside your company, so it is sol called A2A.
B2B - business 2 business
Let's say, there are 2 companies, and they have a different systems, which need to be integrated. For Ex: your client is using SAP R/3 and their customer is having some other technology. they want to integrate each Appications. this is B2B.
"B2B" is contemporary shorthand for a longtime sales practice called business-to-business. B2B transactions primarily target companies and other wholesale buyers, while transactions targeting individuals are called B2C, or business-to-customer. Many organizations have both B2B and B2C components, but it's not unusual for a company to specialize in B2B services or sales. In fact, the vast majority of products and services sold are considered to be B2B in nature.
One major reason for the popularity of B2B sales and services is sheer volume. An individual customer may visit a clothing manufacturer's website catalog and order two pairs of shoes or a sweater. The buyer for a national chain of clothing stores, however, may order 5,000 pairs of shoes and 2,000 sweaters. Without a B2B component, the manufacturer would have lost out on a very lucrative sale. This is why many companies provide B2B options alongside the B2C offerings at their websites and other outlets.
B2B sales are also generated by providing a specialized product line or service not available to the general public. This form of B2B transaction is very common in the manufacturing world. A company which produces shaving cream in cans, for example, may need a specific plastic nozzle. Several plastic injection molding companies would send sales representatives to pitch their particular designs. These nozzles would be useless for individual customers, but a manufacturer may order thousands of them.
With the growth in electronic communications, B2B has taken on even more importance. Instead of simply focusing on business-to-business sales, modern corporations are conducting other financial transactions online. B2B communications are now being used to promote investment, trade stocks and form financial alliances. Because the price of these transactions is far beyond the reach of most individuals, there is no equivalent business-to-customer option available. Some B2B transactions handled electronically can literally run into the billions of dollars.
Today's business world is infinitely more complex than it was a long time ago.
Modern companies have a large number of applications that take care of
running the business. Such diverse applications weren't a problem initially
because they were meant to provide stand-alone, independent, and
automated functions. The result of this diversity was a collection of stovepipe
applications rather than a unified network of linked systems. But now, the
companies are realizing the utmost need to integrate these independent data
silos to leverage the information stored in them across the various vertical
and horizontal domains as well as surmount the ever-increasing costs of
building new applications.
And this is where an A2A Integration solution comes into the picture.
1>A2A Integration
A2A Integration is a collection of processes, software and hardware tools,
methodologies, and technologies. When implemented together, they have the
aim of consolidating, connecting, and organizing all the businesses computer
applications, data, and business processes (both legacy and new) into a
seamlessly interfaced framework of system components that allow real-time
exchange, management, and easy reformulation of the company's missioncritical
information and knowledge.
2> B2B Integration
B2B Integration is fundamentally about coordinating information among
businesses and their information systems.
In today's world with companies operating in a global business environment,
B2B Integration is a pre-requisite for them to remain competitive. They need
to come out of their shell and interact with their suppliers, partners, and
customers distributed throughout the world. B2B Integration enables a
company to focus on its core competencies and offload other services to
partners to gain efficiency and reduce cost.
A2A:
If you do the Integration for Business Process in the same LAND SCAPE then it is called A2A .
B2B:
If you do the Intergration for the BP out side the Customer LAND SCAPE then it is called a B2B
cheers
reward points if found useful

Difference between A2A and B2B scenarios.

hi,
i want to know what is difference between A2A and B2B scenarios.
plz give me some examples if possible.
thanks and regards
vijender

Hi VIJENDER SRIRAMOJU ,
SAP XI is an integration technology and platformu2026
u2026for SAP and non-SAP applications.
u2026for A2A and B2B scenarios.
u2026for asynchronous and synchronous communication.
u2026for cross-component Business Process Management.
The following websites wil answer u'r questions :
SAP Exchange Infrastructure: Process-Centric Collaboration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ed49db90-0201-0010-c4a5-c520866a19c7
Application to Application scenarios :
Tutorial: Developing XI Content for A2A Processes
http://help.sap.com/saphelp_nw2004s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
Business-to-Business Processes:
Enabling Business-to-Business Processes
http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/c76642804a173be10000000a155106/frameset.htm
Standards Required to Support XML-Based B2B Integration
http://xml.coverpages.org/rosettanetStandardsForIntegration.pdf
B2B and Industry Standards Support
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/00bfe190-0201-0010-5cab-b623ca90e746

Data from table in xml Format and Inserting it into Table

Hi All
I have table where xml data is stored in long format with xml tag know i have read the entire xml xoulmn which is xml tag and insert it into diffrent table can any suggest me the code
Thanks & Regards

I believe you are on the wrong forum. You want the XML DB forum.
See:
XML DB

How can I take the part that parses the .XML file and make it a procedure.

CREATE OR REPLACE PACKAGE BODY XMLSTUD6 AS
Author: Jimmy Harris
Created: 5/25/2006
Purpose: 1.This package has an XML file initialized to a variable called DOC .
          2.It will then take the values from the XML file and insert them into a PL/SQL table.
          3.From the PL/SQL table it will insert values into the STUDENTS table.
          4.After step four above, the STUDLOAD procedure will insert (Sequence,Status, .XML file, USER, SYSDATE, ERROR_Message
                         into the AUDIT_XMLSTUD table regardless if insert status was successfull or not status is indicated by either an Y or
          NO and the original XML filed that was currently processed, the date and user who executed the procedure.
          If the status was NO then it will insert the Oracle SQLERRM massage, into the REASON_FOR_ERROR column.
                         If status is Y then REASOK_FOR_ERROR IS NULL.
                         5,Make sure you embed the xml file with an inner and outer ' ' ie: ' the whole .xml file string ' as the input
                         parameter into the STUDLOAD procedure.
This package excepts the whole .XML file as a CLOB as an input parameter, so that the end-user will not have
                              modify the code.
Modification History:     1.6/09/2006 JImmy Harris Modified code, added the Function "WORD_CONVERTER1" to accept the requested text data and
return a coded value back to our Welligent system.
                              2. Was advised that a front end type of functionality was not neccesary for this issue so I removed the INSERT_XML_FILE,
                              UPDATE_XML_FILE and the INSERT_XML_file.
FUNCTION WORD_CONVERTER1 (v_domain IN VARCHAR2 := null,
v_incoming IN VARCHAR2 := null) RETURN VARCHAR2 IS
v_well VARCHAR2(32);
v_editdd BOOLEAN;
v_code VARCHAR2(32);
CURSOR C_conv_wrd IS
SELECT WELL
INTO v_code
FROM CONVERSION_TABLE
WHERE DOMAIN = UPPER(TRIM(v_domain))
AND INCOMING = UPPER(TRIM(v_incoming));
BEGIN
OPEN c_conv_wrd;
LOOP
FETCH c_conv_wrd INTO v_code;
EXIT WHEN c_conv_wrd%NOTFOUND;
END LOOP;
CLOSE c_conv_wrd;
RETURN v_code;
END WORD_CONVERTER1;
PROCEDURE STUDLOAD (DOC CLOB) IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
v_mm NUMBER;
v_dd NUMBER;
v_yyyy NUMBER;
v_DATE DATE;
v_race VARCHAR2(1);
v_eth VARCHAR2(1);
v_prim_lang VARCHAR2(1);
v_house_lang VARCHAR2(1);
v_gender VARCHAR2(1);
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
v_success VARCHAR2(200);
v_failure VARCHAR2(200);
l_error_code varchar2(200);
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent');
-- Loop through the list and create a new record in a table collection for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/LastName');
     s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/FirstName');
     s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/MiddleName');
     v_dd := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Day');
     v_mm := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Month');
v_yyyy := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Year');
     v_DATE := TO_DATE(v_mm||' '||v_dd||' '||v_yyyy,'MMDDYYYY');
     s_tab(s_tab.last).STUDENT_DOB := v_date;
     s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/Street');
     s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ApartmentNumber');
     s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/County');
     s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/State');
     s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ZipCode');
v_race := WORD_CONVERTER1('RACE',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Race')));
     v_eth := WORD_CONVERTER1('EHTNICITY',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Ethnicity')));
     v_prim_lang:= WORD_CONVERTER1('PRIMARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/PrimaryLanguage')));
     v_house_lang:= WORD_CONVERTER1('SECONDARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/HouseholdLanguage')));
     v_gender := WORD_CONVERTER1('GENDER',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Gender')));
s_tab(s_tab.last).STUDENT_RACE := v_race;
     s_tab(s_tab.last).STUDENT_ETHNIC := v_eth;
     s_tab(s_tab.last).STUDENT_PRI_LANG :=v_prim_lang;
     s_tab(s_tab.last).STUDENT_SEC_LANG := v_house_lang;
     s_tab(s_tab.last).STUDENT_GENDER :=v_gender;
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
INSERT INTO STUDENTS (SHISID, SSN, DOE_SCHOOL_NUMBER,PATIENT_TYPE, TEACHER, HOMEROOM,STUDENT_LAST_NAME, STUDENT_FIRST_NAME, STUDENT_MI,STUDENT_DOB,
STUDENT_BIRTH_CERT, STUDENT_COMM,STUDENT_MUSA, STUDENT_FAMSIZE, STUDENT_FAMINCOME,STUDENT_UNINSURED, STUDENT_LUNCH, STUDENT_ZIP,STUDENT_STATE,
STUDENT_COUNTY, STUDENT_STREET,STUDENT_APART_NO, STUDENT_PHONE, STUDENT_H2O_TYPE,STUDENT_WASTE_TRT, STUDENT_HOME_SET, STUDENT_NONHOME_SET,
STUDENT_GENDER, STUDENT_RACE, STUDENT_ETHNIC,STUDENT_PRI_LANG, STUDENT_SEC_LANG, STUDENT_ATRISK,EMER_COND_MEMO, ASSIST_DEVICE_TYPE,
SCHOOL_ENTER_AGE,STUDENT_CURR_GRADE, S504_ELIG_DATE, S504_DEV_DATE,S504_REV_DATE, STUDENT_504, STUDENT_IEP,IEP_EXP_DATE, GRAD_CLASS, TYPE_DIPLOMA,
GRADE_RETAIN, LIT_PASS_TEST_MATH, LIT_PASS_DATE_MATH,LIT_PASS_TEST_WRITE, LIT_PASS_DATE_WRITE, LIT_PASS_TEST_READ,LIT_PASS_DATE_READ, SPEC_ED_ELIG,
SPEC_ED_CODE,TRANSPORT_CODE, TRANSPORT_NO, PRIME_HANDICAP,PRIME_HANDICAP_PERCENT, PRIME_HANDI_MANAGER, FIRST_ADD_HANDI,FIRST_ADD_HANDICAP_PERCENT,
FIRST_ADD_HANDI_504, FIRST_ADD_HANDI_504_DATE, SECOND_ADD_HANDI, SECOND_ADD_HANDICAP_PERCENT, MED_EXTERNAL_NAME, INS_TYPE, INS_PRI, INS_NAME,
INS_MEDICAID_NO, ELIGDATE, INS_PRIV_INSURANCE, INS_APPR_BILL, INS_APPR_DATE, INS_PARENT_APPR,INS_POL_NAME, INS_POL_NO, INS_CARRIER_NO,
INS_CARRIER_NAME, INS_CARRIER_RELATE, INS_AFFECT_DATE, INS_COPAY_OV, INS_COPAY_RX, INS_COPAY_AMBUL,INS_COPAY_EMER, INS_COPAY_OUTPAT,STUDENT_INACTIVE,
PHYS_ID, ENCOUNTERNUM,USERID,MODDATE, STUDENT_ID, S504_DISABILITY,CHAPTER1, WELLNESS_ENROLL, SCHOOL_OF_RESIDENCE,INITIAL_IEP_DATE, CALENDAR_TRACK,
USA_BORN,ALT_ID, FUTURE_SCHOOL, IEP_LAST_MEETING,IEP_LAST_SETTING, IEP_LAST_REFER_EVAL, THIRD_ADD_HANDI,LEP, GIFTED, IEP_EXIT_REASON,
CASE_MANAGER_ID, INTAKE_NOTES, CALLER_PHONE,CALL_DATE, CALLER_RELATIONSHIP, CALLER_NAME,BUSINESS_PHONE, FAX, EMAIL,HIGHEST_EDUCATION, INTAKE_DATE,
SERVICE_COORDINATOR, DISCHARGE_DATE, DISCHARGE_REASON, DISCHARGE_NOTES,INTAKE_BY, INTAKE_STATUS, IEP_LAST_SERVED_DATE,IEP_APC_DATE, IEP_EXIT_DATE,
ADDRESS2, LEGAL_STATUS, RELIGION, EMPLOYMENT_STATUS, TARG_POP_GROUP1, TARG_POP_GROUP2, MARITAL_STATUS,THIRD_ADD_HANDI_PERCENT, LAST_INTERFACE_DATE,
SERVICE_PLAN_TYPE,CURRENT_JURISDICTION, FIPS, BIRTH_PLACE_JURISDICTION,BIRTH_PLACE_HOSPITAL, BIRTH_PLACE_STATE, BIRTH_PLACE_COUNTRY,
OTHER_CLIENT_NAME, SIBLINGS_WITH_SERVICES, PERM_SHARE_INFORMATION,PERM_VERIFY_INSURANCE, REFERRING_AGENCY, REFERRING_INDIVIDUAL,AUTOMATIC_ELIGIBILITY,
INTAKE_IEP_ID, FUTURE_SCHOOL2,FUTURE_SCHOOL3, TRANSLATOR_NEEDED, TOTAL_CHILDREN_IN_HOME,REFERRED_BY, FAMILY_ID, SCREENING_CONSENT_FLAG,PICTURE_FILE,
DUAL_ENROLLED, DOE_SCHOOL_NUMBER2)
VALUES (123456789025, null,null ,null,null,null ,s_tab(stud).STUDENT_LAST_NAME,s_tab(stud).STUDENT_FIRST_NAME,s_tab(stud).STUDENT_MI,
s_tab(stud).STUDENT_DOB,null ,null,null ,null,null,null,null,s_tab(stud).STUDENT_ZIP,s_tab(stud).STUDENT_STATE ,s_tab(stud).STUDENT_COUNTY,
s_tab(stud).STUDENT_STREET,s_tab(stud).STUDENT_APART_NO,null,null,null ,null , null,
s_tab(stud).STUDENT_GENDER ,s_tab(stud).STUDENT_RACE , s_tab(stud).STUDENT_ETHNIC,
s_tab(stud).STUDENT_PRI_LANG ,s_tab(stud).STUDENT_SEC_LANG, null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null,
null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null ,null , null, null, null,null );
END LOOP;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,DOC,'Y',NULL,SYSDATE);
HTP.HTMLOPEN;
v_success:= 'The values from the .XML file have been successfully inserted into the STUDENTS table in the Oracle Database.';
htp.bold(v_success);
HTP.HTMLCLOSE;
COMMIT;
-- Free any resources associated with the document now it that it is no longer needed.
xmldom.freeDocument(v_doc);
EXCEPTION
WHEN OTHERS THEN
l_error_code := SQLERRM;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,nvl(DOC,TO_CLOB('No .XML file entered, user pressed button without entering correct information.')),'NO',l_error_code,SYSDATE);
HTP.HTMLOPEN;
v_failure:= 'The attempt made to insert files to the Student table has failed because,'||l_error_code;
htp.bold(v_failure);
HTP.HTMLCLOSE;
COMMIT;
END STUDLOAD;
PROCEDURE UPDSTUDLOAD (DOC CLOB) IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
v_mm NUMBER;
v_dd NUMBER;
v_yyyy NUMBER;
v_DATE DATE;
v_race VARCHAR2(1);
v_eth VARCHAR2(1);
v_prim_lang VARCHAR2(1);
v_house_lang VARCHAR2(1);
v_gender VARCHAR2(1);
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
v_success VARCHAR2(200);
v_failure VARCHAR2(200);
l_error_code varchar2(200);
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent');
-- Loop through the list and create a new record in a table collection for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/LastName');
     s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/FirstName');
     s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/MiddleName');
     v_dd := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Day');
     v_mm := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Month');
v_yyyy := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Year');
     v_DATE := TO_DATE(v_mm||' '||v_dd||' '||v_yyyy,'MMDDYYYY');
     s_tab(s_tab.last).STUDENT_DOB := v_date;
     s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/Street');
     s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ApartmentNumber');
     s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/County');
     s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/State');
     s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ZipCode');
v_race := WORD_CONVERTER1('RACE',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Race')));
     v_eth := WORD_CONVERTER1('EHTNICITY',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Ethnicity')));
     v_prim_lang:= WORD_CONVERTER1('PRIMARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/PrimaryLanguage')));
     v_house_lang:= WORD_CONVERTER1('SECONDARY_LANG',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/HouseholdLanguage')));
     v_gender := WORD_CONVERTER1('GENDER',UPPER(xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Gender')));
s_tab(s_tab.last).STUDENT_RACE := v_race;
     s_tab(s_tab.last).STUDENT_ETHNIC := v_eth;
     s_tab(s_tab.last).STUDENT_PRI_LANG :=v_prim_lang;
     s_tab(s_tab.last).STUDENT_SEC_LANG := v_house_lang;
     s_tab(s_tab.last).STUDENT_GENDER :=v_gender;
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
     UPDATE STUDENTS
     SET
     STUDENT_LAST_NAME = s_tab(stud).STUDENT_LAST_NAME,
     STUDENT_FIRST_NAME = s_tab(stud).STUDENT_FIRST_NAME,
     STUDENT_MI = s_tab(stud).STUDENT_MI,
     STUDENT_DOB = s_tab(stud).STUDENT_DOB,
     STUDENT_ZIP = s_tab(stud).STUDENT_ZIP,
     STUDENT_STATE = s_tab(stud).STUDENT_STATE,
     STUDENT_COUNTY = s_tab(stud).STUDENT_COUNTY,
     STUDENT_STREET = s_tab(stud).STUDENT_STREET,
     STUDENT_APART_NO = s_tab(stud).STUDENT_APART_NO
     WHERE SHISID = 123456789025;
END LOOP;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,DOC,'Y',NULL,SYSDATE);
HTP.HTMLOPEN;
v_success:= 'The updated .XML file has been successfully saved to the STUDENTS table in the Oracle Database.';
htp.bold(v_success);
HTP.HTMLCLOSE;
COMMIT;
-- Free any resources associated with the document now it that it is no longer needed.
xmldom.freeDocument(v_doc);
EXCEPTION
WHEN OTHERS THEN
l_error_code := SQLERRM;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,nvl(DOC,TO_CLOB('No .XML file entered, user pressed button without entering correct information.')),'NO',l_error_code,SYSDATE);
HTP.HTMLOPEN;
v_failure:= 'The attempt made to insert files to the Student table has failed because,'||l_error_code;
htp.bold(v_failure);
HTP.HTMLCLOSE;
COMMIT;
END UPDSTUDLOAD;
PROCEDURE DELSTUDLOAD (DOC CLOB) IS
v_parser xmlparser.Parser;
v_doc xmldom.DOMDocument;
v_nl xmldom.DOMNodeList;
v_n xmldom.DOMNode;
v_mm NUMBER;
v_dd NUMBER;
v_yyyy NUMBER;
v_DATE DATE;
TYPE stuxml_type IS TABLE OF STUDENTS%ROWTYPE;
s_tab stuxml_type := stuxml_type();
v_success VARCHAR2(200);
v_failure VARCHAR2(200);
l_error_code varchar2(200);
BEGIN
-- Create a parser.
v_parser := xmlparser.newParser;
xmlparser.setValidationMode(v_parser, FALSE);
-- Parse the document and create a new DOM document.
SYS.XMLPARSER.PARSECLOB ( v_parser, DOC );
v_doc := SYS.XMLPARSER.getDocument(v_parser);
-- Free resources associated with the Parser now it is no longer needed.
xmlparser.freeParser(v_parser);
-- Get a list of all the STUD nodes in the document using the XPATH syntax.
v_nl := xslprocessor.selectNodes(xmldom.makeNode(v_doc),'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent');
-- Loop through the list and create a new record in a table collection for each STUD record.
FOR stud IN 0 .. xmldom.getLength(v_nl) - 1 LOOP
v_n := xmldom.item(v_nl, stud);
s_tab.extend;
-- Use XPATH syntax to assign values to he elements of the collection.
s_tab(s_tab.last).STUDENT_LAST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/LastName');
     s_tab(s_tab.last).STUDENT_FIRST_NAME :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/FirstName');
     s_tab(s_tab.last).STUDENT_MI :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Name/MiddleName');
     v_dd := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Day');
     v_mm := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Month');
v_yyyy := xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/BirthDate/Year');
     v_DATE := TO_DATE(v_mm||' '||v_dd||' '||v_yyyy,'MMDDYYYY');
     s_tab(s_tab.last).STUDENT_DOB := v_date;
     s_tab(s_tab.last).STUDENT_STREET :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/Street');
     s_tab(s_tab.last).STUDENT_APART_NO :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ApartmentNumber');
     s_tab(s_tab.last).STUDENT_COUNTY :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/County');
     s_tab(s_tab.last).STUDENT_STATE :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/State');
     s_tab(s_tab.last).STUDENT_ZIP :=xslprocessor.valueOf(v_n,'/com.welligent.Student.BasicStudent.Create/DataArea/NewData/BasicStudent/Address/ZipCode');
END LOOP;
FOR stud IN s_tab.first..s_tab.last LOOP
     DELETE FROM STUDENTS
     WHERE SHISID = 123456789025;
END LOOP;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,DOC,'Y',NULL,SYSDATE);
HTP.HTMLOPEN;
v_success:= 'The .XML file has been successfully deleted from the STUDENTS table in the Oracle Database.';
htp.bold(v_success);
HTP.HTMLCLOSE;
COMMIT;
-- Free any resources associated with the document now it that it is no longer needed.
xmldom.freeDocument(v_doc);
EXCEPTION
WHEN OTHERS THEN
l_error_code := SQLERRM;
INSERT INTO AUDIT_XMLSTUD1(XMLSTUDPK,USERID,XMLFILE,STATUS,REASON_FOR_ERROR,DATE_MODIFIED)
VALUES(SEQ_XMLSTUD1.NEXTVAL,USER,nvl(DOC,TO_CLOB('No .XML file entered, user pressed button without entering correct information.')),'NO',l_error_code,SYSDATE);
HTP.HTMLOPEN;
v_failure:= 'The attempt made to insert files to the Student table has failed because,'||l_error_code;
htp.bold(v_failure);
HTP.HTMLCLOSE;
COMMIT;
END DELSTUDLOAD;
END XMLSTUD6;

Try opening the problem files using a text editor or file viewer to see what the first few bytes contain. All valid FM binary files for FM 11 will contain <MakerFile 11.0> in the first bytes of the file.
When updating books, it's sometimes better to just to create a new book file and add the files to that.
When renaming files in a book, changes at the system level will break any links/cross-references between files, so it's always best to use the Rename option in the Book file to change FM file names. This will maintain the correct linkages.

Printing parameter values in xml report, and displaying it in header of the

Hi All,
Can anybody give me an idea to print the parameter values in the xml report.
My requirement is like, I have 10 parameters in report builder, I have generated the xml file and created the .rtf template and finally registerted in oracle apps. But now, the requirement is to print the parameter values in the report output.I don't see any xml tags in the xml output.
Any suggestion will be appreciated.
Thanks in advance.

I think all the XML attributes can contain lexicals. If you bring up the property palette against the report object you can just set the following:
XML Tag Attributes: myParameter="&<P_1>"
where P_1 is your user parameter.

PROBLEM WITH XML PUBLISHER AND GRAPH NOT DISPLAYING IN ORACLE APPS

Hi
All you XML Gurus here. I have a problem, When i create a report in XML Publisher desktop i can see a graph im putting into the report on preview and works fine. But when i upload the report as a rtf file into Oracle applications i can see everything else the table logo and stuff .. But just not the Graph Itself when run on the concurrant manager....
Problem number 2
Is there a way that i can use XML Desktop and create a line graph with 2 lines rather than 1 plotting
here is my xml for graph i have made with one line
chart:
<Graph>
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(.//SELF_OTHERS)}" rowCount="1">
<RowLabels><Label></Label></RowLabels>
<ColLabels>
<xsl:for-each select=".//SELF_OTHERS"> <Label><xsl:value-of select="BEHAVIOUR"/></Label>
</xsl:for-each>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each select=".//SELF_OTHERS"> <Cell><xsl:value-of select="SCORE"/></Cell>
</xsl:for-each> </RowData>
</DataValues>
</LocalGridData>
</Graph>
All help would be much appreciated to my 2 problems....
Thanks
Sha

Hi All
Will post solution tomorrow or Monday on blog. Heres the chart XML for now.
chart:
<Graph graphType="LINE_VERT_ABS"><LegendArea visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//SALE, 'YEAR'))}" rowCount="3">
<RowLabels>
<Label>SOFTWARE</Label>
<Label>HARDWARE</Label>
<Label>SERVICES</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/YEAR" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SOFTWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/HARDWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SERVICES)" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
with the following data
<?xml version="1.0" encoding="UTF-8"?>
<SALES>
     <SALE>
          <YEAR>2006</YEAR>
          <SOFTWARE>1200</SOFTWARE>
          <HARDWARE>850</HARDWARE>
          <SERVICES>2000</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2007</YEAR>
          <SOFTWARE>1000</SOFTWARE>
          <HARDWARE>800</HARDWARE>
          <SERVICES>1100</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2008</YEAR>
          <SOFTWARE>900</SOFTWARE>
          <HARDWARE>1200</HARDWARE>
          <SERVICES>1500</SERVICES>
     </SALE>
</SALES>
The latest Template Builder makes this a cinch!
Regards
Tim
http://blogs.oracle.com/xmlpublisher

How can i use FNDLOAD for XML reports and data defnitions

I registerd concurrent program and linked xml reports and data defnitions in staging instance, and successfully moved to DEV.. after that stage is refreshed and when i download the details from DEV and uploaded to Stage only concurrent program i can upload...Wheteher we can use FNDLOAD Command for the Data definitions or Data template for the XML Report,used FNDLOAD for the concurrent program, it uploaded only concurrent program details.

Hi,
Use XDOLoader.
Note: 469585.1 - How To Use XDOLoader?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=469585.1
Regards,
Hussein

Problem with XML loading and xmlns

I'm having a problem with loading an XML file that was created by Filemaker. Filemaker will output an XML file using one of two different grammars. One outputs in a mostly standard form that I can use with one glitch. Flash CS4 AS3 seems to have a problem with the xmlns in one of the nodes.
Specifically:
<FMPDSORESULT xmlns="http://www.filemaker.com/fmpdsoresult">
If I remove the xmlns="http://www.filemaker.com/fmpdsoresult" the file loads properly and I can access the various fields with no problem. However, when I leave the xmlns=... in, it will trace out the XML properly but I can't access the fields using the code listed below. This is driving me crazy!
With the xmlns part in the XML file I get the following error when it tries to load the thumbnail files:
TypeError: Error #1010: A term is undefined and has no properties.
I need to have it so that the user can enter/edit data and simply output the XML file from Filemaker and then Flash will load up the unaltered XML file and show the info requested by the user. That is to say I could have the user open the XML file in a word processing application and have them delete the xmlns..., but that is rather cumbersome and not very user friendly.
I've tried every xml.ignore function I could find but it doesn't help. Hopefully someone out there can help
Thanks,
-Mark-
Partial XML:
XML From Filemaker Export:
<?xml version="1.0" encoding="UTF-8" ?>

<FMPDSORESULT xmlns="http://www.filemaker.com/fmpdsoresult">
<ERRORCODE>0</ERRORCODE>
<DATABASE>Sport.fp7</DATABASE>
<LAYOUT></LAYOUT>
<ROW MODID="1" RECORDID="1">
    <FirstName>Mark</FirstName>
    <LastName>Fowle</LastName>
    <Sport>Sailing</Sport>
    <Medal>None</Medal>
    <CourseOfStudy>Design</CourseOfStudy>
    <Year>1976-1978</Year>
    <HomeState>California</HomeState>
    <ImageName>93</ImageName>
</ROW>
</FMPDSORESULT>
AS3 Code:
import fl.containers.UILoader;
var aPhoto:Array=new Array(ldPhoto_0,ldPhoto_1,ldPhoto_2,ldPhoto_3,ldPhoto_4,ldPhoto_5);
var toSet:int=10;//time out set time
var toTime:int=toSet;
var photoPerPage:int=6;
var fromPos:int=photoPerPage;
var imgNum:Number;
//var subjectURL:URLRequest=new URLRequest("testData_FM8.xml");
var subjectURL:URLRequest=new URLRequest("Sports.xml");
var xmlLoader:URLLoader=new URLLoader(subjectURL);
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
var subjectXML:XML = new XML();
subjectXML.ignoreWhitespace=true;
subjectXML.ignoreComments=true;
subjectXML.ignoreProcessingInstructions=true;
function xmlLoaded(evt:Event):void {
    subjectXML=XML(xmlLoader.data);
    if (root.loaderInfo.bytesTotal==root.loaderInfo.bytesLoaded) {
        removeEventListener(Event.ENTER_FRAME, xmlLoaded);
        trace("XML Data File Loaded");
        trace(subjectXML);
    } else {
        trace("File not Found");
    imgNum=2;//subjectXML.ROW.length;
    trace(subjectXML);
    loadThumb(0);
function loadThumb(startPos:int):void {
    var count:Number=aPhoto.length;
    trace(subjectXML.DATABASE);
    for (var i=0; i<count; i++) {
    try{
        aPhoto[i].source="images/"+subjectXML.ROW[startPos+i].ImageName+"_main.jpg";
    }catch (e:Error){
        trace(e);
        aPhoto[i].mouseChildren=false;
        aPhoto[i].addEventListener(MouseEvent.MOUSE_DOWN, onThumbClick);
    trace("Current mem: " + System.totalMemory);
    ldAttract.visible=false;
function unloadThumb():void {
    var count:Number=aPhoto.length;
    for (var i=0; i<count; i++) {
        aPhoto[i].unload();
        aPhoto[i].removeEventListener(MouseEvent.MOUSE_DOWN, onThumbClick);
    trace("Current mem: " + System.totalMemory);
function onThumbClick(evt:MouseEvent) {
    var i:Number;
    //trace("Thumbnail Clicked " + evt.target.name);
    i=findPos(evt.target.name);
    ldLrgPhoto.source="images/"+subjectXML.ROW[i+fromPos].LOCAL_OBJECT_ID+"_main.jpg";
    ldLrgPhoto.visible=true;
    btnPrev.visible=false;
    btnNext.visible=false;
    gotoAndStop("showPhoto");
function findPos(thumb:String):Number {
    var pos:Number;
    var count:Number=aPhoto.length;
    for (var i:Number=0; i<count; i++) {
        if (thumb==aPhoto[i].name) {
            pos=i;
    return pos;

Hi,
I was trying to use xml namespaces, so in my application I receive an XML file from the server. The file has a namespace, so when I parse the file I need to specify the namespace:
I got the following piece of xml:
<ls:exchange xmlns:ls=".../tsw" xmlns:tm="http://kxa">
    <ls:projects>
         <tm:annotation id="" date="" action="getprojects" status="responseok"/>
    <ls:project id="" name="proj" description="..." owner="asss" release="2" />
        <ls:projectV id="" version="" creationdate="" modificationdate=""/ >
    </ls:project>
</ls:projects>
</ls:exchange>
and the following code
<mx:VBox label="WELCOME" verticalScrollPolicy="off" horizontalScrollPolicy="off">
      <mx:Tree id="tree" dataProvider="{srv.lastResult.project}" labelField="@name" width="300" height="100%" itemOpen="itemOpenEvt(event);" />
</mx:VBox>
So i want to display the content of the xml (project nodes”) in a tree view, but i don’t know how to includes the namespace"ls:" in the data provider “srv.lastResult.project”. can u help me it’s urgent.
sincerly
Celine

Reading A xml file and sending that XML Data as input to a Service

Hi All,
I have a requirement to read(I am using File adapter to read) a xml file and map the data in that xml to a service(schema) input variable.
Example of xml file that I have to read and the content of that xml file like below:
<StudentList>
    <student>
       <Name> ravi</Name>
       <branch>EEE</branch>
      <fathername> raghu</fathername>
    </student>
<student>
       <Name> raju</Name>
       <branch>ECE</branch>
      <fathername> ravi</fathername>
    </student>
<StudentList>
I have to pass the data(ravi,EEE,raghu etc) to a service input varible. That invoked Service input variable(schema) contains the schema similar to above schema.
My flow is like below:
ReadFile file adapter -------------------> BPEL process -----> Target Service.I am using transform activity in BPEL process to map the data from xml file to Service.
I am using above xml file as sample in Native Data format(to create XSD schema file).
After I built the process,I checked file adapter polls the data and receive the file(I am getting View xml document in EM console flow).
But transform activity does not have anything and it is not mapping the data.I am getting blank data in the transform activity with only element names like below
---------------------------------------------------------------------------EM console Audit trail (I am giving this because u can clearly understand what is happening-----------------------------------------------------
   -ReceiveFile
        -some datedetails      received file
          View XML document (This xml contains data and structure like above xml )
    - transformData:
        <payload>
          <InvokeService_inputvariable>
              <part name="body">
                 <StudentList>
                     <student>
                       <name/>
                        <branch/>
                        <fathername/>
                     </student>
               </StudentList>
          </part>
         </InvokeService_inputvariable>
'Why I am getting like this".Is there any problem with native data format configuration.?
Please help me out regarding this issue as I am running out my time.

Hi syam,
Thank you very much for your replies so far so that I have some progrees in my task.
As you told I could have put default directory in composite.xml,but what happenes is the everyday new final subdirectory gets created in the 'soafolder' folder.What I mean is in the c:/soafolder/1234_xmlfiles folder, the '1234_xmlfiles' is not manually created one.It is created automatically by executing some jar.
Basically we can't know the sub folder name until it is created by jar with its own logic. whereas main folder is same(soafolder) ever.
I will give you example with our folder name so that it would be more convenient for us to understand.
1) yesterday's the folder structure : 'c:/soafolder/130731_LS' .The '130731_LS' folder is created automatically by executing some jar file(it has its own logic to control and create the subdirectories which is not in our control).
2) Today's folder structure : 'c:/soafolder/130804_LS. The folder is created automatically(everytime the number part(130731,130804).I think that number is indicating 2013 july 31 st like that.I have to enquire about this)is changing) at a particular time and xml files will be loaded in the folder.
Our challenge : It is not that we can put the default or further path in composite.xml and poll the file adapter.Not everytime we have to change the path in composite.xml.The process should know the folder path (I don't know whether it is possible or not.) and everyday and file adapter poll the files in that created subfolders.
I hope you can understand my requirement .Please help me out in this regard.

Integrate XML GW and B2B

Similar Messages

Maybe you are looking for