Integrated Configuration - Possible for this scenario?

Hi experts,
Could you please tell me if Integrated Configuration would work in this scenario, if so could you please tell me how.
A file is read and accordingly a RFC call is made. The response of the RFC is used to determine receivers. The receivers are other RFC's and IDoc's to different systems.
I was planning to use the receiver determination step in BPM to achieve this.
I am on PI 7.11
Thank you.
Radhika.

> Could you please tell me if Integrated Configuration would work in this scenario, ...
No. You cannot use IC in combination with BPM.

Similar Messages

Pricing at time of goods receipt not possible for this item

We're receiving error Message no. 06634 Pricing at time of goods receipt not possible for this item when trying to change the PO Pricing Date Category from No Control to 5 GR Date.
The error message is clear and reads:
Pricing at time of goods receipt not possible for this item
Message no. 06634
Diagnosis
For this purchasing document item, you wish to specify that a new price determination process is to be carried out at the time of goods receipt.
System Response
Pricing cannot be carried out for the item at the time of goods receipt because the price was either entered manually or copied from the last purchasing document.
The scenario is that we have a contract reference on a PO and the contract condition records are to be maintained as a new price is valid each day. The problem without this is that the new pricing will not be reflected in the GR.
What is the solution to overcome this issue?
NOTE: the Info Record conditions are not being read during GR as the PO references a contract.

For further clarification the PO is referencing a contract and as such not pulling the pricing information from the info record and instead pulling the price from the conditions on the contract.
I want to change the pricing date category from " No Control" to "5 GR Date" however I'm receiving the error message stated and unsure of how to make this change.
The intent is not to create a new PO each day the condition record is created and instead we are utilizing one PO referencing one contract with multiple date delimited condition records containing the daily pricing.

Adobe Offline Form - Parse method is not possible for this type

Hi All,
I have developed an application for the offline scenario of interactive adobe form. I tried to load the adobe form from my desktop. After pressing the button "Display form" it throws an error "Parse method is not possible for this type".
If I include wdContext.getNodeInfo().getAttribute("pdfObject").getModifiableSimpleType() in the doInit() method of the view I receive this error -
com.sap.tc.webdynpro.progmodel.context.ContextException: MappedAttributeInfo(UploadView.pdfObject): must not modify the datatype of a mapped attribute
When I comment it out and upload I receive the error enclosed -
Parse method is not possible for this type
Can someone please help me with a step by step solution to this problem?
Any help is highly appreciated.
Many thanks,
Divya

Hi Divya,
Please try to do it as stated below:
     IWDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute("pdfObject");
     ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
     IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType)type;
Try putting the code in wdInit() or wdDoModifyView().
Let me know if you still face the issue.
Regards,
Arafat

Help required specifying Transation attributes for this scenario

Hi ,
I am trying to create/update rows in a database using BMP and CMP beans.
A business method ( Method1 )in session bean calls a non-business method ( Method2) in the same session bean which inturn calls an EntityBean ( EB1-BMP) . EB1 can throw a certain business exception upon which , the Method1 in the session bean calls another EntityBean in a loop( EB2-CMP).
The problem is that , when the EB1 throws the business exception, i am getting an exception ( part of the stack trace attached below ).
Could any please explain what should be the transaction attributes to be specified for this scenario.
Using RequiresNew for the EntityBeans would not work ( or would it ?? ) because the entity bean is being called in a loop and the commit or rollback should happen for all the methods.
I feel the problem should be solved by specifying the transaction attribute for Method2 ( non business method in session bean ) as Required, but i guess this is not possible.
How exactly will the transaction behave in this scenario, is the exception caused because EB1 has thrown an exception and i am trying to continue the transaction.
Could someone please suggest a solution or workaround for this problem.
Regards,
Harsha
---- Begin backtrace for nested exception
java.lang.IllegalStateException
at com.ibm.ws.Transaction.JTA.TransactionImpl.enlistResource(TransactionImpl.java:1694)
javax.ejb.EJBException: nested exception is: com.ibm.ws.ejbpersistence.utilpm.PersistenceManagerException: PMGR6022E: Error using adapter to create or execute an Interaction. com.ibm.ws.rsadapter.cci.WSInteractionImpl@28d16547
.

tryout business method ( Method1 )in session bean with transaction as RequiresNew.
catch exception in Method2 originated from EB1-BMP
make the method in EB2-CMP as Required/Mandatory
I have made a guess here so just tryout and let me know if works.
Its recommend that not to use both BMP's and CMPs in your application. Have any one either.

Sales order creation is not possible for this notification type

Hello,
I want to create Sales Order through following menu:
Notification -- Functions - Sales order - CreateSelection of Order Type.
But I get following message:
'Sales order creation is not possible for this notification type'
The message says: No sales order type is assigned to the notification type.
But I did not find any such configuration where I can assign notification type to Sales Order document type.
Please help.
regards

Transaction OIM9
Menu Path
Customizing > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Define Order Types and Special Notification Parameters
Nomally CS (customer service) area use this function.
Regards
Luke

When trying to install itunes on windows 7 i got a configuration data for this product is corrupt?

It is not allowing me to install, it gives me the error: configuration data for this product is corrupt. How do I install itunes on my windows 7?
Trying to update my ipad....but I first need to install itunes!!

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, i get message "The Configuration data for this product is Corrupt".

I am trying to install iTunes in my 64 bit Windows 7 PC. My PC runs normal. But when I try to install Itunes from Apple website, I get a message "The Configuration data for this product is Corrupt contact your support personneI" I
am so disgusted,please help!!!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Java 1.4.2_03 Windows: The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

Java 1.4.2_03 WindowsXP The configuration data for this product is corrupt.

Trying to install j2SE 1.4.2_03 JRE on a Windows XP system (exact version needed for a bussiness application) after all previous Java installations have been deleted and all Windows Registry Java related keys have been manually deleted with Regedit.exe.
The EXE installer works properly in other machines but in this one it stops after a few seconds with the following message:
"The configuration data for this product is corrupt. Contact your support personnel".
The problem is related to the Windows install mechanism rather than the Java installer itself and likely caused by the manual Registry deletion.
The error code is 1610: ERROR_BAD_CONFIGURATION.
Reinstalling Windows didn't fix the problem.
Unable to recover the system to a previous state with the System Recovery Tool (Accesories/System Tools).
Other versions of Java installers fail the same way and show the same message.
I don't know how to contact "my support personnel" nor who they are.
I'd appreciate any help about this problem or what Java installers need within the Registry to work or a clue of any kind.

Sorry for the duplicated message. It's my first post and I messed up a little with the right section.
A new downloaded copy of the file or other versions of Java failed to install with the same error message.
I've learned there is a product ID in the registry that must be present for the installer to run. I'm searching for this "mysterious" product ID and how to set the right Windows XP Registry entry for the JSE 1.4.2_03 version.
I'm still not sure this will fix the problem.
Thanks for replying.

Parse method is not possible for this type

I have a file upload component and one button in a view.
I have created a binary type context element and mapped it with fileupload component.while clicking the submit button I am getting " Parse method is not possible for this type" exception.
help me out.
Thanks In advance

Hi,
Thanks for your response. I have written the following code in wddoinit():
IWDAttributeInfo attributeinfo = wdContext.getNodeInfo().getAttribute(IPrivateSubstanceDocView.IFileUpload02Element.DATA);
attributeinfo.getModifiableSimpleType();
fileUpload02 is my context.
but I am getting a null pointer exception over here.
can ypu please help it.
Actually the case is this is a window, which is opening on click of a hyperlink on another View.
With the action method I am calling this View.
Thus on click of a hyperlink just I am opening a new View then here I am a browse button etc...
PLease help if you can

Parse method is not possible for this type Exception in web dynpro

I have a file upload component and one button in a view.
I have created a binary type context element and mapped it with fileupload component.while clicking the submit button I am getting " Parse method is not possible for this type" exception.
help me out.

Hi sridhar,
Use this code for Upload
context u create one attribute(up),u assign the data type as "Resource"(which is dictionary type)
InputStream text = null;
    int temp = 0;
    try
         File file = new File(wdContext.currentContextElement().getUp().getResourceName());
         FileOutputStream op = new FileOutputStream(file);
         if(wdContext.currentContextElement().getUp()!=null)
              text = wdContext.currentContextElement().getUp().read(false);
               while((temp=text.read())!=-1)
                                                                   op.write(temp);
         op.flush();
         op.close();
    catch(Exception e)
     e.printStackTrace();

WhatÃÂ¢ÃÂÃÂs the best practice for this scenario?

Hi,
My users want the ability to change the WHERE and/or ORDER BY clause at runtime. They may define user preferences on each screen ( which is bind to a view object). They want to see the same records based on WHERE/ORDER BY defined on the last visit. That is why I keep the users preferences and load the screen based on that, using :
View.setWhereClause(...);
View.setOrderByClause(...);
View.executeQuery();
This works good when only one user working with the application but faced low performance when more than one user working with the application.
What are the points to increase the performance and what is the best practice for this scenario?
Thanks for your help in advance.

Sung,
I am talking only about 2 users in my testing. I am sure i missed something but could not recognize that.
This page is my custom query page including a tag to instantiate app module in stateful mode at the top <jbo:ApplicationModule..> and a tag to instantiate data source <jbo:Datasource...> and release tag at the bottom <jbo:ReleasePageResources..> and some java code in the middle(body). The java code constructed the query statement and then fires the query to set the view object based on the query statement using the above methods.
So, I am facing very slow performance(speed) when two clients load this page at the same time. Looks like the entire application locks for others when one client load this page and fire the query. i realized the battle neck is where executeQuery() is executing.
what do you think.
Thanks in advance for your comments.

When i install latest itunes gives an error the configuration data for this product is corrupt.how can i i fix it

hi there
i was trying to install latest itunes it gives error
the configuration data for this product is corrupt contact your personal support
how can i fix it and what is the reason for this error

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

To configure VOIP for this 2FXO card

We are having one Cisco 3640 Router with One Serial Port and 2FXS(2nos) Voice card. We have configured the 2FXO card to the best of our knowledge. These 2 ports are configured in EPABX. Now we are able to get the dialtone but we are unable to make calls to US . Kindly let me know the commands to configure VOIP for this 2FXO card.
Thanks in advance
Regards
Sapna shah

We are having one Cisco 3640 Router with One Serial Port and 2FXS(2nos) Voice card.We have configured voice card FXO but now due to some unknown reason we are not able to call the US office. Kindly help us .Here is the configuration:
Can u let us know what errors we have made in configuruing steps .
Here are HYD-RTR#sh voice port
Foreign Exchange Station 1/0/0
Type of VoicePort is FXS
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is Direct line for IOC
Noise Regeneration is enabled
Non Linear Processing is enabled
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancel Coverage is set to 8 ms
Connection Mode is normal
Connection Number is not set
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call-Disconnect Time Out is set to 60 s
Region Tone is set for US
Analog Info Follows:
Currently processing Voice
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Voice card specific Info Follows:
Signal Type is loopStart
Ring Frequency is 25 Hz
Hook Status is On Hook
Ring Active Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Foreign Exchange Station 1/0/1
Type of VoicePort is FXS
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is Connected to Alcatel PABX thru trunk line
Noise Regeneration is enabled
Non Linear Processing is enabled
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancel Coverage is set to 8 ms
Connection Mode is normal
Connection Number is not set
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call-Disconnect Time Out is set to 1 s
Region Tone is set for US
Analog Info Follows:
Currently processing unknown
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Voice card specific Info Follows:
Signal Type is loopStart
Ring Frequency is 25 Hz
Hook Status is On Hook
Ring Active Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Foreign Exchange Station 1/1/0
Type of VoicePort is FXS
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is Second Direct Line For IOC
Noise Regeneration is enabled
Non Linear Processing is enabled
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancel Coverage is set to 8 ms
Connection Mode is normal
Connection Number is not set
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call-Disconnect Time Out is set to 60 s
Region Tone is set for US
Analog Info Follows:
Currently processing Voice
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Voice card specific Info Follows:
Signal Type is loopStart
Ring Frequency is 25 Hz
Hook Status is On Hook
Ring Active Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Foreign Exchange Station 1/1/1
Type of VoicePort is FXS
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is Second Line Connected to Alcatel PABX thru trunk line
Noise Regeneration is enabled
Non Linear Processing is enabled
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancel Coverage is set to 8 ms
Connection Mode is normal
Connection Number is not set
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call-Disconnect Time Out is set to 60 s
Region Tone is set for US
Analog Info Follows:
Currently processing unknown
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Voice card specific Info Follows:
Signal Type is loopStart
Ring Frequency is 25 Hz
Hook Status is On Hook
Ring Active Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Foreign Exchange Office 2/0/0
Type of VoicePort is FXO
Operation State is DORMANT
Administrative State is UP
The Last Interface Down Failure Cause is Administrative Shutdown
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancel Coverage is set to 8 ms
Connection Mode is plar
Connection Number is 100
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call-Disconnect Time Out is set to 60 s
Region Tone is set for US
Analog Info Follows:
Currently processing none
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Voice card specific Info Follows:
Signal Type is groundStart
Number Of Rings is set to 1
Supervisory Disconnect active
Hook Status is On Hook
Ring Detect Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Dial Type is pulse
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Pulse Rate Timing is set to 10 pulses/second
InterDigit Pulse Duration Timing is set to 750 ms
Foreign Exchange Office 2/0/1
Type of VoicePort is FXO
Operation State is DORMANT
Administrative State is UP
The Last Interface Down Failure Cause is Administrative Shutdown
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancel Coverage is set to 8 ms
Connection Mode is normal
Connection Number is not set
Initial Time Out is set to 10 s
Interdigit Time Out is set to 10 s
Call-Disconnect Time Out is set to 60 s
Region Tone is set for US
Analog Info Follows:
Currently processing none
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Impedance is set to 600r Ohm
Voice card specific Info Follows:
Signal Type is groundStart
Number Of Rings is set to 1
Supervisory Disconnect active
Hook Status is On Hook
Ring Detect Status is inactive
Ring Ground Status is inactive
Tip Ground Status is inactive
Dial Type is dtmf
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Pulse Rate Timing is set to 10 pulses/second
InterDigit Pulse Duration Timing is set to 750 ms
Please enlighten us why we are not able to make calls .IS there any fault in the configurations made by us !
Thanks in advance

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Integrated Configuration - Possible for this scenario?

Similar Messages

Maybe you are looking for