Integrated Configuration transport error
Hi,
I just transported an Integrated Configuration from DVE system to the QA and the IC in the QAS is not configured correclty.
PI 7.1
My IC have multiple operations and 2 receivers.
The Receivers System were translated correctly (SYSDVE > SYSQA) however the operations and the operation mapping were not correct when activated in QA.
In DVE Operation1 pointed to Receiver1, but in QAS my Operation1 is associated with Receiver2.
Anyone had a similar issue?
Regards,
Martin
Thanks for the answer Mickael.
The receivers are Business System. Everything seems well configured in the SLD. We did many transport without any problems, but it's the first time we transport Integrated Configuration.
I noticed that in my Integrated Configuration, the configuration is fine under the 'Receiver' tab for all of the operations, it's only under the 'Receiver Interfaces' that the Receiver Systems is not properly configured for the operations...
Similar Messages
-
BCS configuration transport errors
Hi Experts,
I have a problem when I tried to transport BCS configuration from BWD into BWT. Previously, those configuration were transported succesfully into BWT; however, somehow this time failed.
The error message that I got in STMS:
Communication error: Destination BWT -> long text
Message no. FINB_TR047
Diagnosis
A communication error has arisen during execution of the remote function call.
Destination: BWT
Message: Name or password is incorrect. Please re-enter
System response
The import could not be completed correctly.
Procedure
Check whether program terminations have occurred in the target system (target client).
I have searched few OSS Notes which is related but it doesn't help.
Do you have some ideas how to fix this problem?
Thank you very much and points will be given for helpful answers.
Regards,
MonaHi Mona,
Looks like your RFC-connection is bad. You need to check it out, and repair. Probably somebody changed ALEREMOTE or BWREMOTE passwords.
See here the proper RFC's format:
SPRO: SEM/Business Analytics -> Fin. Basis -> Transport and client copies -> Transports -> Assign RFC destinations for transport methods. Click on the book icon and see the directions. -
Error during sync integrated configuration - incoming payload missed
Hi guys,
we are suing PI 7.11 and trying to use the new feature integrated configuration wherever possible.
Now I test a sync szeanrio where sender is SOAP and receiver is RFC.
The messages fails in SOAP Sender channel with the error that there is no suitable receiver found for this message.
During integrated configuration content based routing is used.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Receiver Determination failed for message e54dba61-9ded-11de-801a-020000000038(OUTBOUND)
But the message fails without persisting the payload, so I could check what value is missing in the receiver rules.
Furthermore the message is only displayed in the sender chanel and is not shown in rwb
While using the normal way of messsage processing where the integration server is involved, such errors are persisted and the payload is also available.
Is that the normal behaviour of integrated configurations.
Could the behaviour be parametrized?
Any help appreciated
Kind regards
JochenHi,
thanks for helping.
Because of integrated configuration the integration server is passed and there is no entry in sxmb_moni.
I already tried this blog, but it doesn´t work for me.
I changed the parameter according to the blog.
But the message content of sync messages are stilled deleted.
Does the parameter changed requires restart of adapter engine or complete java stack?
There two templates one called 'Usage_Type_all_in_One' and above there is an node named equal to the server node name. The parameter of which template have to be changed.
I tried both with out success.
Hopefully you could help me using this feature
Kind regards
Jochen -
Integrated configuration (PI 7.1) throws error when do 'Test Configuration'
I am doing Proxy to Web Service (SOAP) sync scenario. We are using Integrated Configuration. After created integrated configuration and test this from (Tools --> Test Configuration) it throws the following error at the receiver agreement step.
Sender Agreement - Green
Receiver Determination - Green
Interface Determination - Green
Operation Mapping - Green
Receiver Agreement - Red.
Problem occurred in receiver agreement for sender -DR4400_D to receiver -ESRI,urn:AssetManagement.AddressManagementSearchCapabilitiesFromECC_Out: No standard agreement found for , DR4400_D, , ESRI, urn::AssetManagement, AddressManagementSearchCapabilitiesFromECC_OutTest Configuration cannot be used to test Integrated Configuration Scenario.....refer my reply here:
Re: Integrated Configuration in PI7.1
Regards,
Abhishek. -
Integrated Configuration - Message in error shown in SXI_MONITOR?
Hi,
We have some messages in error for an integrated configuration (PI 7.1 EHP1)
Those message are shown in SXI_MONITOR. (SXMB_MONI)
Is this a normal behavior..?
We did just deploy the new ICO, could this be a cache issue?
Regards,
MartinIt was my comprenhension that Integrated Configuration message, successfull or in error, would be shown only in RWB.
Since we do see some error message in SXMB_MONI that are from an Integrated Configuration, I was confused.
I will try clearing the cache and see if we still see message in the abap stack. -
SystemAck in integrated configuration
Hello all.
I have configured an integrated configuration for a proxy -> soap scenario.
The sender adapter - is SOAP with XI 3.0 protocol.
in the section: HTTP Destination (from NWA) - I have written the ECC HTTP destination
(defined with url: http://<ecc server>:8000/sap/XI/engine/?type=entry )
The messages go out ok, but when I look in the ECC - the proxy doesn't get a system ack.
When I look in the message monitoring in the PI - I can see the SystemAck in successful, and in Transport part it says:
Loopback - so it seems that the ack is not being sent out of the PI.
Is there anything else to configure to make the ack to be sent back to the ECC?
Any help will be appreciated.Hi,
Did you request this acknowledgement while calling the proxy from the backend system? This is a prerequisite to receiving it there. See an example of how to do it here:
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
Also, see section 5. Limitation of this document below - it says that acks are not supported by ICO.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b
However, I remember setting it up once and acks were sometimes sent properly. In particular, System OK acks were sent. But when an error occurred during mapping, no ack reached the backend system.
Hope this helps,
Greg -
Transport error: [IPT_HttpSendError] HTTP encounters send error :415
Hi,
I am working on webservice invocation from B2B. I am able to invoke the webservice using SOAP request.
I configured custom document over ebMS protocol and HTTP transport in B2B. When I invoke webservice from B2B i am getting the HTTPSendError.
B2B log:
2009.08.28 at 07:32:45:238: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking PackMessage
2009.08.28 at 07:32:45:239: Thread-10: B2B - (DEBUG) MimePackaging:pack:Enter
2009.08.28 at 07:32:45:244: Thread-10: B2B - (DEBUG) MimePackaging:createMimeMessage:Enter
2009.08.28 at 07:32:45:254: Thread-10: B2B - (DEBUG) MimePackaging:createMimeMessage:number of pc components: 1
2009.08.28 at 07:32:45:255: Thread-10: B2B - (DEBUG) MimePackaging:createMimeBodyPart:Enter
2009.08.28 at 07:32:45:381: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Enter
2009.08.28 at 07:32:45:382: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Exit
2009.08.28 at 07:32:45:382: Thread-10: B2B - (DEBUG) MimePackaging:createMimeBodyPart:Exit
2009.08.28 at 07:32:45:413: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Entering...
2009.08.28 at 07:32:45:413: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Leaving...
2009.08.28 at 07:32:45:667: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Enter
2009.08.28 at 07:32:45:668: Thread-10: B2B - (DEBUG) MimePackaging:applySecurity:Exit
2009.08.28 at 07:32:45:668: Thread-10: B2B - (DEBUG) MimePackaging:createMimeMessage:Exit
2009.08.28 at 07:32:45:674: Thread-10: B2B - (DEBUG) MimePackaging:getMimeContent:Enter
2009.08.28 at 07:32:45:674: Thread-10: B2B - (DEBUG) MimePackaging:getMimeContent:Exit
2009.08.28 at 07:32:45:675: Thread-10: B2B - (DEBUG) MimePackaging:pack:Exit
2009.08.28 at 07:32:45:680: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking Pre-Transmit
2009.08.28 at 07:32:45:681: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Enter
2009.08.28 at 07:32:45:681: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Log & Update Database Tables
2009.08.28 at 07:32:45:681: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
2009.08.28 at 07:32:45:682: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create a Native Event Table row for outgoing Request Message
2009.08.28 at 07:32:45:682: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Enter
2009.08.28 at 07:32:45:684: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:insertNativeEvtTblRow msgInfo.id = 83667220
2009.08.28 at 07:32:45:685: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:protocl id set A
2009.08.28 at 07:32:45:685: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:insertNativeEvtTblRow protocolCollabId = null
2009.08.28 at 07:32:45:814: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Exit
2009.08.28 at 07:32:45:827: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create Event Table row for Message Retries
2009.08.28 at 07:32:45:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit timeToAck = Thu Jan 01 00:00:00 GMT 1970
2009.08.28 at 07:32:45:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit business transaction info name null revision null
2009.08.28 at 07:32:45:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Exit
2009.08.28 at 07:32:45:829: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 07:32:45:851: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 07:32:45:851: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 07:32:45:851: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
2009.08.28 at 07:32:45:852: Thread-10: B2B - (DEBUG) Protocol Name: HTTP
2009.08.28 at 07:32:45:852: Thread-10: B2B - (DEBUG) Version Name: 1.0
2009.08.28 at 07:32:45:853: Thread-10: B2B - (DEBUG) Endpoint: http://localhost:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 07:32:45:855: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTP://localhost:8003/RemoteTPPDI-TESTWS-CONTEXT-ROOT/TESTWSSOAPHTTPPORT
2009.08.28 at 07:32:45:855: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 501 http://localhost:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 07:32:45:856: Thread-10: B2B - (DEBUG)
Protocol = HTTP
Version = 1.0
Transport Header
Content-Transfer-Encoding:binary
ACTION_NAME:RemoteTPTestBA
DATE:Fri, 28 Aug 2009 07:32:44 GMT
TO:RemoteTP
DOCTYPE_NAME:RemoteTPDoc1
FROM_PARTY:HostTP
DOCTYPE_REVISION:1.0
FROM:HostTP
MESSAGE-ID:83667220
TO_PARTY:RemoteTP
Content-Type:text/plain; charset=us-ascii
Connection:close
Parameters
-- listing properties --
http.sender.timeout=0
2009.08.28 at 07:32:46:101: Thread-10: B2B - (DEBUG) scheme null userName null realm null
2009.08.28 at 07:32:46:339: Thread-10: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-415
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :415
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:793)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:598)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.08.28 at 07:32:46:339: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2009.08.28 at 07:32:46:340: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2009.08.28 at 07:32:46:340: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.08.28 at 07:32:46:340: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.08.28 at 07:32:46:341: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.08.28 at 07:32:46:341: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :415
[IPT_HttpSendError] HTTP encounters send error :415
2009.08.28 at 07:32:47:172: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2009.08.28 at 07:32:47:203: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2009.08.28 at 07:32:47:212: Thread-10: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 722FB0840F821DDDE04400144F96EEDE
2009.08.28 at 07:32:47:212: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>83667220</correlationId>
<b2bMessageId>83667220</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendError] HTTP encounters send error :415
[IPT_HttpSendError] HTTP encounters send error :415
.</errorText>
<errorDescription>
<![CDATA[Machine Info: (HostTPis.com)
Transport error: [IPT_HttpSendError] HTTP encounters send error :415
[IPT_HttpSendError] HTTP encounters send error :415
. ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.08.28 at 07:32:47:214: Thread-10: B2B - (DEBUG) AQJMSCorrelationID = 722FB0840F821DDDE04400144F96EEDE
2009.08.28 at 07:32:47:240: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2009.08.28 at 07:32:47:240: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 07:32:47:247: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 07:32:47:247: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 07:32:47:248: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2009.08.28 at 07:32:47:303: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: HTTP
Unique Message ID: 83667220
Trading Partner: RemoteTP
Message Signed: No
Payload encrypted: No
Information incompleteHi Anuj,
I changed to HTTP version 1.1 with SOAP version 1.1 and ebMS 2.0.
B2B log:
009.08.28 at 08:38:56:747: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage EBMSVersion: 2.0
2009.08.28 at 08:38:56:747: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage Trying to build soap message
2009.08.28 at 08:38:56:752: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage soap message built
2009.08.28 at 08:38:56:753: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream not resetting stream source
2009.08.28 at 08:38:56:756: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage soap message - .1: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId/></eb:From></eb:MessageHeader></env:Header><env:Body/></env:Envelope>
2009.08.28 at 08:38:56:757: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage work area not null
2009.08.28 at 08:38:56:757: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage property name = AQJMSCorrelationID
2009.08.28 at 08:38:56:758: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream not resetting stream source
2009.08.28 at 08:38:56:760: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage soap message - 1: <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId eb:type="Generic Identifier">HostTP</eb:PartyId></eb:From></eb:MessageHeader></env:Header><env:Body/></env:Envelope>
2009.08.28 at 08:38:56:761: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage pingmsg = false pongMsg = false isStatusRequestMsg false isStatusResponseMsg false
2009.08.28 at 08:38:56:763: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage b2bMessageID is not null, using that 92775561
2009.08.28 at 08:38:56:763: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage checking to see if msg id is in the correct format
2009.08.28 at 08:38:56:763: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage msg id must have an '@' sign according to the ebms standard. Generating new id..
2009.08.28 at 08:38:56:765: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:isAckRequested Enter
2009.08.28 at 08:38:56:766: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:isAckRequested returning false
2009.08.28 at 08:38:56:766: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage request doesnt need to be signed
2009.08.28 at 08:38:56:766: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Enter
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Returning service name:null
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Enter
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceName Returning service name:null
2009.08.28 at 08:38:56:767: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting service name = null
2009.08.28 at 08:38:56:768: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Enter
2009.08.28 at 08:38:56:768: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Returning service type:null
2009.08.28 at 08:38:56:768: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Enter
2009.08.28 at 08:38:56:769: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSServiceType Returning service type:null
2009.08.28 at 08:38:56:769: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting service type = null
2009.08.28 at 08:38:56:769: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Enter
2009.08.28 at 08:38:56:770: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Returning from role:null
2009.08.28 at 08:38:56:770: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Enter
2009.08.28 at 08:38:56:770: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSFromRole Returning from role:null
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting from role = null
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting from overRideHeader = null
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Enter
2009.08.28 at 08:38:56:771: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Returning to role:null
2009.08.28 at 08:38:56:772: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Enter
2009.08.28 at 08:38:56:772: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSToRole Returning to role:null
2009.08.28 at 08:38:56:772: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting to role = null
2009.08.28 at 08:38:56:773: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSActionName Enter
2009.08.28 at 08:38:56:773: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:getEBMSActionName Returning action name:null
2009.08.28 at 08:38:56:773: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage action name = RemoteTPTestBA
2009.08.28 at 08:38:56:774: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage refToMsgId is null
2009.08.28 at 08:38:56:774: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage setting manifest for message
2009.08.28 at 08:38:56:776: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage generated payloadId:cid:0A4DBD5D12360284C08000002F358500
2009.08.28 at 08:38:56:778: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage This is stream source mode
2009.08.28 at 08:38:56:779: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage xml payload <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://testws/types/">
<ns1:testElement>
<ns1:s>TEST</ns1:s>
</ns1:testElement>
</soap:Body>
</soap:Envelope>
2009.08.28 at 08:38:56:785: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream resetting stream source
2009.08.28 at 08:38:56:786: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage final soap message: ------=_Part_2_3316214.1251448736779
Content-Type: text/xml;charset=UTF-8
<?xml version="1.0" encoding="UTF-8" ?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" xsi:schemaLocation="http://schemas.xmlsoap.org/soap/envelope/ http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd"><env:Header><eb:MessageHeader env:mustUnderstand="1" eb:version="2.0"><eb:From><eb:PartyId eb:type="Generic Identifier">HostTP</eb:PartyId></eb:From><eb:To><eb:PartyId eb:type="Generic Identifier">RemoteTP</eb:PartyId></eb:To><eb:CPAId>RemoteTPTest</eb:CPAId><eb:ConversationId>HostTP@0A4DBD5D12360284BFC000002F358200</eb:ConversationId><eb:Service/><eb:Action>RemoteTPTestBA</eb:Action><eb:MessageData><eb:MessageId>HostTP@0A4DBD5D12360284BFC000002F358200</eb:MessageId><eb:Timestamp>2009-08-28T08:38:56.000Z</eb:Timestamp></eb:MessageData></eb:MessageHeader></env:Header><env:Body><eb:Manifest eb:id="oracle0A4DBD5D12360284C07000002F358300" eb:version="2.0"><eb:Reference eb:id="payloadref-0A4DBD5D12360284C07000002F358400" xlink:href="cid:0A4DBD5D12360284C08000002F358500" xlink:type="simple"/></eb:Manifest></env:Body></env:Envelope>
------=_Part_2_3316214.1251448736779
Content-Type: text/xml
Content-Id: <0A4DBD5D12360284C08000002F358500>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body xmlns:ns1="http://testws/types/">
<ns1:testElement>
<ns1:s>TEST</ns1:s>
</ns1:testElement>
</soap:Body>
</soap:Envelope>
------=_Part_2_3316214.1251448736779--
2009.08.28 at 08:38:56:786: Thread-10: B2B - (DEBUG) EBMSExchangePlugin:resetInputStream resetting stream source
2009.08.28 at 08:38:56:791: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage adding headers
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage adding content type header
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage adding content type header value is multipart/related;type="text/xml";boundary="----=_Part_3_1702949.1251448736786";start="<ebxheader-0A4DBD5D12360284BEB000002F358100>"
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:createMessage Exit
2009.08.28 at 08:38:56:792: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking PackMessage
2009.08.28 at 08:38:56:793: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Invoking Pre-Transmit
2009.08.28 at 08:38:56:793: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Enter
2009.08.28 at 08:38:56:794: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Log & Update Database Tables
2009.08.28 at 08:38:56:795: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
2009.08.28 at 08:38:56:795: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create a Native Event Table row for outgoing Request Message
2009.08.28 at 08:38:56:795: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Enter
2009.08.28 at 08:38:56:796: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:insertNativeEvtTblRow msgInfo.id = HostTP@0A4DBD5D12360284BFC000002F358200
2009.08.28 at 08:38:56:797: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:protocl id set A
2009.08.28 at 08:38:56:797: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:insertNativeEvtTblRow protocolCollabId = HostTP@0A4DBD5D12360284BFC000002F358200
2009.08.28 at 08:38:56:820: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(3 params) Exit
2009.08.28 at 08:38:56:827: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Create Event Table row for Message Retries
2009.08.28 at 08:38:56:827: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit timeToAck = Thu Jan 01 00:00:00 GMT 1970
2009.08.28 at 08:38:56:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit business transaction info name null revision null
2009.08.28 at 08:38:56:828: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:preTransmit Exit
2009.08.28 at 08:38:56:829: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 08:38:56:831: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 08:38:56:832: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 08:38:56:832: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
2009.08.28 at 08:38:56:832: Thread-10: B2B - (DEBUG) Protocol Name: HTTP
2009.08.28 at 08:38:56:833: Thread-10: B2B - (DEBUG) Version Name: 1.1
2009.08.28 at 08:38:56:833: Thread-10: B2B - (DEBUG) Endpoint: http://10.77.189.109:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 08:38:56:834: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTP://10.77.189.109:8003/RemoteTPPDI-TESTWS-CONTEXT-ROOT/TESTWSSOAPHTTPPORT
2009.08.28 at 08:38:56:835: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 501 http://10.77.189.109:8003/RemoteTPPDI-TestWS-context-root/TestWSSoapHttpPort
2009.08.28 at 08:38:56:838: Thread-10: B2B - (DEBUG)
Protocol = HTTP
Version = 1.1
Transport Header
DOCTYPE_NAME:RemoteTPDoc1
SOAPAction:"ebXML"
TO_PARTY:RemoteTP
DOCTYPE_REVISION:1.0
ACTION_NAME:RemoteTPTestBA
FROM_PARTY:HostTP
Content-Type:multipart/related;type="text/xml";boundary="----=_Part_3_1702949.1251448736786";start="<ebxheader-0A4DBD5D12360284BEB000002F358100>"
Content-Length:1860
Parameters
-- listing properties --
http.sender.timeout=0
2009.08.28 at 08:38:56:840: Thread-10: B2B - (DEBUG) scheme null userName null realm null
2009.08.28 at 08:38:56:866: Thread-10: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-500
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.createTransportResponse(HTTPSender.java:793)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:598)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.08.28 at 08:38:56:866: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2009.08.28 at 08:38:56:867: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2009.08.28 at 08:38:56:867: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.08.28 at 08:38:56:867: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.08.28 at 08:38:56:868: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.08.28 at 08:38:56:868: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
[IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
2009.08.28 at 08:38:56:885: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2009.08.28 at 08:38:56:887: Thread-10: B2B - (DEBUG) Engine:notifyApp Enter
2009.08.28 at 08:38:56:895: Thread-10: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 72309D4B835925B9E04400144F96EEDE
2009.08.28 at 08:38:56:896: Thread-10: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>92775561</correlationId>
<b2bMessageId>92775561</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
[IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.HostTPis.com)
Transport error: [IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>.
[IPT_HttpSendError] HTTP encounters send error :500
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://testws/types/"><env:Body><env:Fault><faultcode>env:MustUnderstand</faultcode><faultstring>SOAP must understand error: {http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd}MessageHeader</faultstring></env:Fault></env:Body></env:Envelope>. ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.08.28 at 08:38:56:897: Thread-10: B2B - (DEBUG) AQJMSCorrelationID = 72309D4B835925B9E04400144F96EEDE
2009.08.28 at 08:38:56:929: Thread-10: B2B - (DEBUG) Engine:notifyApp Exit
2009.08.28 at 08:38:56:930: Thread-10: B2B - (DEBUG) DBContext commit: Enter
2009.08.28 at 08:38:56:933: Thread-10: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.08.28 at 08:38:56:934: Thread-10: B2B - (DEBUG) DBContext commit: Leave
2009.08.28 at 08:38:56:934: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2009.08.28 at 08:38:56:936: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Exchange Protocol: ebMS Version 2.0
Transport Protocol: HTTP
Unique Message ID: HostTP@0A4DBD5D12360284BFC000002F358200
Trading Partner: RemoteTP
Message Signed: No
Payload encrypted: No
Information incomplete -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
HTTP Transport Error in Net BEans 6.5
Hello,
I am consuming a web service using JAX-RPC. I am trying to log onto a web interface through my program but I am getting the following error:
Feb 6, 2009 1:10:54 PM ttsample.Engine Login
SEVERE: null
java.rmi.RemoteException: HTTP transport error: java.net.UnknownHostException: http; nested exception is:
Logged in...
HTTP transport error: java.net.UnknownHostException: http
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:819)
at ttsample.Engine.Login(Engine.java:77)
at ttsample.Main.main(Main.java:30)
Caused by: HTTP transport error: java.net.UnknownHostException: http
at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:140)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:96)
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:802)
... 2 more
I searched the web and found that this is a proxy setting proble.
I configured apache earlier to use the local host that run the web client.
When I change the http port host and port number and try to login into the web client its giving me page not found error.So I changed the proxy settings to default and then restarted the system and then tried to log into the web client and it worked.
I dont know where i am going wrong.I want to consume the WSDL and log into the web client but i am gettingthe above error.
Anyone's help will be greatly appreciated.
Thank You,
Sravanthi.Where did you get the address: http://sal006.salnetwork.com:82/bin/lccountrycodes.cgi (shouldn't the 82 be 83 instead?)
-
Integrated Configuration- Problem occurred in receiver agreement for sender
Hi , I am using AAE in PI 7.1 and it is proxy to file scenrios.
When Ia m doing testing in Integration Directory in test configuration its giving me this error .
Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
( here it should take interface Qualifications_Async_In, but logs says it is pointing to outbound interface)
here when I am going in to trace logs then it seems that are not able to understand the receiver interface . rather then it is taking sender inface in logs..
In trace logs . I am getting
Receiver Determination
<Not found>
<Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
<Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
<Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="3" type="T">...create rule engine </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
<Trace level="2" type="T">Number of Receivers:1 </Trace>
<Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
Interface Determination
<Not found>
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
Operation Mapping
<Not found>
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace>
<Trace level="3" type="T">Mapping already defined in interface determination </Trace>
<Trace level="1" type="T">No mapping configured </Trace>
<Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
I have developed the other integrated configuration scenario and this is working fine .
please let me know how can I troubleshoot itI am using sender as Soap and receiver as File adapter.
here the problem is that while going for interface deteremination and receiver agreement it is calling to Outbound interface .
It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
I put the name of inbound interface in configuration but while executing its calling outbound interface. -
How to configure a error queue for weblogic jms topic
Hi guys.
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration Policy: Redirect
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.
Any suggestions for this topic? Can anyone provide some helps or any useful links.
Thanks in advance.
MingzhuangMingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj -
Integrated Configuration in PI 7.1
Hi All,
I am using 3 BAPIS at the receiving side out of which 1 BAPI will be picked as per the condition in the condition editor.
1.So,do I need to tick the "Sender Uses Virtual Receiver" check-box in the "Integrated Configuration" section
2.But when I go for creating the "Integrated Configuration"section without ticking the "Sender Uses Virtual Receiver" check-box ,
it gives me the error that it is already assigned to the object;conflicting direct connections,sender agreements,or integrated configurations are not permitted.
3.I have configured the Sender Agreement,Receiver Agreement before the "Integrated Configuration" section.So,what shall I do?Shall I tick the "Sender Uses Virtual Receiver" check-box in the "Integrated Configuration" section ?
Thanks in advance.Hi ,
Thanks for the reply.
Actually I am having the Process Order coming in the source with 5 to 6 relevant fields.Out of these Process Order fields Status is one of the fields.Based on the the StatuS field the BAPIs will be called at the receiver.So can I skip Integrated Configurations as I am imposing the condition on the data in the payload(Source Structure) as Integrated configuration will not be helpful in my scenerio.?
Or shall I skip Sender Agreement ,Receiver Agreement?
Also,in PI 7.1 Integration Directory there is one section as "Value Mapping Group".I suppose that it is used if and only if value mapping is used.But I am not using any kind of value mapping so can I skip that section?
Thanks in advance.
Edited by: Shweta Kullkarni on Aug 19, 2009 5:19 AM -
Exception in Integration Configuration
Hello,
we get an exception in the Integration Directory when we create an Integration Configuration. When saving the changes we get the following error message:
Internal error: Link from Integrated Configuration | bs_cbp_c | http://BusinessPartner/asynchronous | BPartnerModifyAOut | | to object type "ifmoper" with role "IIF0" is not permitted
Can someone explain, what this message should tell us?
May it be that this error occur when using a service interface of type "Stateless (XI-3.0 compatible)"? This is the case here...
We are running on a SAP PI 7.1 EhP1...
Thanks in Advance.
Best Regards,
LarsHello Lars
There are some known issues in this area. See the notes below:
1) #1338699 Assigned users in Integrated Configuration
2) #1322118 Expression Editor in Integrated Configuration
I recommend that you apply the latest XI patches for your current SP release. This way you will have all the latest bug fixes. See note #1335523 FAQ: Deployment PI Patches in Release 7.1 and higher.
Regards
Mark -
Hi guys,
we are using PI 7.11.
With this release local processing on the advanced adapter engine is possible, when using integrated configurations.
This works fine.
Lately I faced an error situation in an RFC to JDBC scenario, when one field doesn´t meet the conditions of the database.
I tried to dig deeper to identify the incorrect value by switch on the trace in the receiver JDBC channel, as I did several times before.
Afterwards I treied to restart the message.
Following error occurs.
com.sap.engine.interfaces.messaging.api.exception.ConfigException: Unable to retrieve interface determination with object ID ab1bf720bf2711dea7d2020000000030 from CPA cache.
I made some test with integrated configurations (FTP to FTP) and come to the result that errors, which require changes on the communication channel e.g. wrong password etc. result in an new object in the CPA cache
trying restart the failed message ends up in the error specified aboce.
Anyone faced the same issue already?
Kind regards
JochenHI Jochen,
I feel that you should once go for a CPA Cache refresh from Adapter Engine and try executing your failed messages once again in the adapter engine.
To do a CPA Cache Refresh from the Adapter Engine:
To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following URL:
http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this:
http://<host>:<port>/CPACache
Check this How-to Guide on Cache, it will be useful:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34&overridelayout=true
Thanks
Dhwani -
Using new 7.3 Integrated Configuration Directory Services Objects
I am trying to use the new IntegratedConfiguration objects. I can get the wsdl, create the classes and run everything in my local PC. However when I try to deploy the generated jar file in the PI 7.3 ESR it fails because some of the generated names for the Integrated Configuration resources are too long...longer than 180 characters.
Here is the error:
Unable to import zip file COP_PI_GL_Integration.jar. Names of
entries wsdl/com/sap/xi/basis/rootwsdl_IntegratedConfigurationInService_IntegratedConfigurationInImplBean/rootwsdl_importedwsdl_1_IntegratedConfigurationInService_IntegratedConfigurationInImplBean.wsdl,
wsdl/com/sap/xi/basis/rootwsdl_importedwsdl_1_IntegratedConfigurationInService_IntegratedConfigurationInImplBean/rootwsdl_importedwsdl_1_IntegratedConfigurationInService_IntegratedConfigurationInImplBean.wsdl
are too long. Names can have a maximum of 180 characters
I tried shortening the names of the files before I generated the client for the Integrated Configuration and changes the name for the load in one of the files. After this change I was able to make the code work on my local machine and could upload it to the ESR. However, the code fails in PI because the static constructor does not find the resoruce...I suspect because the name is now different since the name of the file I used to generate things was changed but the actual resource name in PI has not changed.
In short, how can I add IntegratedConfiguration to my jar file in a way that will allow me to upload it to the ESR?Hello Martin,
first of all thank you for your response!
Did you also face the following error?
"JAX-WS deployable proxy is instantiated with 'new' instead of been injected. Cannot find WSDL URL for service [class com.sap.xi.basis.IntegratedConfigurationInService]" occures in the method "getPort"."
Is it possible that this error is also caused because of the wsdl file and its' location?
What did you change in the wsdl file? The binding? Where did you store the wsdl file and how did you access it with your client? Code snippets are to much to ask i guess?
Looking forward to your reply.
Regards,
Dennis Root
Maybe you are looking for
-
Hi, Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way
-
Illustrator CS4 saving vector art for Microsoft Word
I have a logo created in Illustrator CS4. I saved the file for use in Microsoft Office using the "save for Office", exporting as a .wmf, and even saving the vector art in Photoshop as a .png. I can get a variety of formats to work well in Word docume
-
InDesign PDF prints greyed and not crisp
InDesign file print solid and crisp but when converted to PDF it is greyed and faded. Created PDF with "Press QUlaity PDF preset" and also tried it through Distiller. Color settings are "North American Prepress 2" in Indesign and U.S. Web Coated (SWO
-
HELP! Problem after updating BIOS of my Lenovo ideapad S10-3S
I'm hoping somebody will help me out of this nightmare. Cause i'm searching and searching across the net for an answer for this the whole day and i didn't find any accurate solutions for this. Well to start, i just updated my laptop's BIOS two days a
-
I just bought my iphone and I can't make a call.
I was so excited to finally get an iphone. I've tried to make calls all night but it never rings or connects. Help!