Integrated ECATT-

Dear Experts,
                    I have created ECATT for Sale order and Delivery ( Integrated ECATT) . Sale Order creating is going Thro. But I have faced some problem when the Delivery Script Is calling. My Posting Date and Picking Qty are not passed to that Particular Screen .
                    Is anbody faced the Same Problem, Let me know the Solution.
With Regards,
Selvan.S

Hi selvan,
I assume you have sales order and delivery recorded in TCD or SAPGUI in separate scripts.
If so please continue with my comments..
1.Please try executing delivery separtely by passing valid values,
in case if parametes are not passed in screen.
then this is a problem in your recording,please record it again or debug.
2.Incase delivery script is working fine, please refresh once interface in integrated script and try passing values again.
In case this does not help,please write little more in detail about your problem
best regards
vinay

Similar Messages

  • QTP Integration - eCATT FUNction call

    Hello folks,
    I am pretty fit in eCATT, but I am fairly new to QTP. I setup an integration in a demo environment and QTP only let's me "open" eCATT Scripts that were recorded with QTP. If I am recording eCATT with QTP i am limited to UI Recording via SAPGui Scripting.
    Is there a way to call other eCATT's from QTP, to use more powerful eCATT options, like BAPI & FUNction calls? Or to directly call BAPIs / Function modules from within QTP?
    Thanks!

    hi,
    "QTP only let's me "open" eCATT Scripts that were recorded with QTP"
    QTP will open only those scripts which it has created.
    it will not open an ecatt script which ecatt has created.
    also we generally use qtp scripts to record and automate and then call the qtp scripts in ecatt.this way helps us use the features of both qtp and ecatt.
    please revert back for any clarifications.
    regards,
    Rakesh..

  • Purpose of Integrating eCATT and QTP?

    Hi Gurus,
    I would like to know what is the purpose of integrating QTP and ecatt (OR) when do we go for integration of QTP and eCATT?
    Please help me on this?
    Regards,
    GS...

    >
    Get Started wrote:
    > Hi Gurus,
    >
    > I would like to know what is the purpose of integrating QTP and ecatt (OR) when do we go for integration of QTP and eCATT?
    >
    > Please help me on this?
    >
    > Regards,
    > GS...
    Hi GS,
    1)There are cases where eCATT will support certain applications like web-based application and hence we use QTP which support this application.
    To put it short,eCATT works excellent with SAP application and if you need to interface applications outside SAP,you can use QTP.
    2)You have to enable setting for the third-party tool.Reach out to your basis team member.
       Once setting is made,you should be able to see the QTP tool and you can use the same for recording.
    For more information,please refer SAP portal.
    Regards,
    SSN.

  • Integration of ECATT with HP QTP

    Hi All,
    We are in the process of _integrating the "SAP eCatt" with "QTP"._
    Request you all to share your experience and knowledge in this. How best we can use it??
    It will be really helpful.
    Regards,
    Venkat

    Hi,
    I have done one project on with eCATT invoking QTP scripts by passing data between the tool tools .
    1) Performance wise it will be slow as you will calling QTP scripts from eCATT .
    2) There are few issues related to format compatibility when you try to pass special characters between eCATT and QTP .
    3) To start with , kindly go through this article , i hope it will help you /people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
    regards
    Harsha

  • ECATT and QTP integration isuue

    Hi,
    I am trying to execute QTP Scripts through eCATT. In this regard i have done the following settings
    Check whether or not you have the roles - SAP_ECAT, SAP_ECET and SAP_ECST in your login id.
    Check the patch levels, support packages of the system
    Check the external tool parameters in the ECCUST_ET table
    Note : The mode of execution for external tool should be 'A' - With surface of external tool in the start options "
    when i tried to eaxeute from eCatt i got the error called "Failure Starting Quick test professional"
    Please any one help me on this............
    Thanks and Regards
    Dileep

    Hi Dileep,
    Kindly go through this article /people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2 , you will be able to sovle few of your issues .
    As i have done project on QTP/eCATT intergration mode .
    The major issues will be .
    1) Performance wise it will be slow , as you will be invoking QTP script from eCATT.
    2) You will face problem with format compatibility .
    I hope , the information solves some of your problem.
    regards
    Harsha

  • Need how to get the data from the external file in eCatt

    Hi ,
      Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
    Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
    But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
    Appreciate response on this

    Hi
    See the links they may be useful
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points for useful Answers
    Regards
    Anji

  • I am getting errors in ECATT

    Hi,
    I have prepared a Test case through SECATT transaction.  I am able upload the record into SAP through eCATT.  But I need to give the values for each and every record.  If I'll not give any value for a non mondatory field also, it is giving me the error message.
    Could anybody help me regarding this.
    Thanks,
    bsv.

    Hi bbsv,
    Extended Computer Aided Test Tool (eCATT) to create and execute functional tests for software. The primary aim is the automatic testing of SAP business processes. Each test generates a detailed log that documents the test process and results.
    Features
    You can:
    · Test transactions and reports
    · Call BAPIs and function modules
    · Test remote systems
    · Check authorizations (user profiles)
    · Test database updates
    · Test the effects of changes to customizing tables
    · Test the effect of changes to customizing settings
    · Check system messages
    Constraints
    eCATT runs in a system based on SAP Web Application Server 6.20 or higher. However, you can use this system to test systems with Release 4.6C or higher.
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    kindly reward if found helpful.
    cheers,
    Hema.

  • Use of ECATT or CATT for creating performamce statistics

    Hi
    The requirement is to monitor the performance of a number of various transactions within our SAP System (ECC6).
    If a user accesses a transaction e.g. MM03 and enters a material and views the material, the performance statistics can be monitored by Basis.
    In my example above (MM03) I want to create the performance statistics every 30mins, but rather than than go into MM03 myself to create the performance statistics which can then be reported on, I want to automate the process of accessing MM03 and displaying the Material Master. (The same material each time)
    I have used transcation SCEM and SCAT previously to create a CATT to upload Plan Costs onto Projects.
    However each time, this had me running the CATT manually.
    Is it possible to create a Test Script that accesses a number of Master Data Display transactions to access a constant set of Master Data (I think this is possible), but can I get the Test Script to run automatically every 30mins...if so how?
    The whole purpose is to compare performance of a consistent set of transaction every 30mins
    Thanks
    Steve

    Hi,
    Sorry for wrong link:
    Have a look at below links which gives you PDF for eCATT.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/BCCATTOL.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCATTOL/CACATTOL.pdf
    Also have a look at below link.
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    to start working on eCATT follow tru these links,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Regards,
    Shiva kumar

  • Where we can test the SAP objects by using eCATT?

    Hi Abapers,
    Where we can test the SAP objects by using eCATT?Is there any separate software or tool we have to install or its included in the SAP itself?
    I have ECC5.0 version?how can i configure or install eCATT?
    Please explain the step by step procedure?
    Early reply is highely appriciable.
    Regards,
    Chow.

    Hi
    Extended Computer Aided Test Tool (eCATT) to create and execute functional tests for software. The primary aim is the automatic testing of SAP business processes. Each test generates a detailed log that documents the test process and results.
    Features
    You can:
    · Test transactions and reports
    · Call BAPIs and function modules
    · Test remote systems
    · Check authorizations (user profiles)
    · Test database updates
    · Test the effects of changes to customizing tables
    · Test the effect of changes to customizing settings
    · Check system messages
    Constraints
    eCATT runs in a system based on SAP Web Application Server 6.20 or higher. However, you can use this system to test systems with Release 4.6C or higher.
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Regards
    Anji

  • ECATT-Extrernal file Upload

    Hi All
    I have some queries on eCATT.It is regarding to run the test script for external data where the data is in Excel or in Text form.
    Your solution will be very helpful for me.
    I have created one test script using FK01(Vendor creation).
    The Fields i had given as input are:1.Create Vendor      :Initial Screen :
    Company Code
    Account Group
    2.Create Vendor    :Address
    Name
    Search term
    City                 
    Country
    3.Create Vendor    :Accounting information   :
    Recon.Account
    Cash mgmnt.gruop.
    With these fields i have created the Test Script called Z_FK01_TEST.
    And parameterized these filed in the same script as
    Company code: I_CCODE
    Account Group:I_ACCGRP like that i parameterize all the above fields  and visibility as 'I'.
    Kindly provide me the solution how can i run this script for the file and required ABAP code and the fields which are to be parameterized and their  visibility and the external file format.
    Also provide me if there is any other way to do along with above.
    Thanks in advance.
    Siva

    Hi
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points for useful Answers
    Regards
    Anji

  • ECATT and Transaction WAK1

    Hey all,
    I'm attempting to use eCATT to create promotions via transaction WAK1 and have run into a problem that I need help with.  During the recording, I need to make changes to the long text field in the header details.  To do this properly (and to get the fields to appear in the BDC) I need to click the SAP Script button which will take me into the older style editor.  This brings back the text I typed in the editor in the BDC so that I can edit it for the next promotion I create.  The problem is that it always overwrites what I put in the BDC with what was recorded initially.  I have even gone through the upload in the foreground and I can see that my entries from the BDC are entered into the transaction, but when I go back in again the text has reverted to the text from the original recording. 
    Is this something to do with the other data that eCATT stores for it's recordings?  Is there any way to modify or delete this so that I can provide different text for the promotion?
    Crossing fingers for a positive response.
    Thanks,
    Tim

    Hi
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • ECATT  versus  QTP

    eCATT and QTP are both automated testing tools.
    eCATT can be used only to test SAP GUI, where as with QTP we can test other appplications also.
    My question is when do we go for eCATT and when do we go for QTP?
    And what is the reason for integrating eCATT with QTP?
    And when we opt for QTP for testing SAP, what is the advantage over eCATT?
    Thanks in advance
    anyone please answer my question
    Message was edited by:
            kumar kumar

    Hi,
    1.eCATT is used to test the SAPGUI based transactions.
    2.If web based transactions such as CRM ISA, SRM EBP applications are involved, then QTP has to be used.
    3. In scenarios where the End to End testing has to be performed using automation starting with Web Frontend to middleware interfaces and backend SAP Transactions such as delivery/shipping, we need to integrate QTP with eCATT.
    Please take a look at this nice blog about QTP->eCATT integration.
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Thanks
    Sudhan Shan

  • Ecatt and QtP

    Dear all,
    I am trying to use Qtp and ecatt . I have made the required settings in Qtp and Ecatt.
    I am also able to record the script using Qtp and the script is getting created in sap system.
    I have also created the User Ecatt_et_usr still when i execute the script directly in ecatt i get the following error
    " Failure when starting quicktest professional".
    Can u please suggest me a way out.
    thanks and regards,
    Priya

    Check whether or not you have the roles - SAP_ECAT, SAP_ECET and SAP_ECST in your login id.
    Check the patch levels, support packages of the system
    Check the external tool parameters in the ECCUST_ET table
    Note : The mode of execution for external tool should be 'A' - With surface of external tool in the start options
    Have a look at this blog: /people/community.user/blog/2007/01/22/integrating-ecatt-mercury-qtp-part-3
    I followed the checklist religiously and things worked out fine for me this first attempt itself.
    This is a straight forward integration and should work without creating any hassles
    Good luck and hope I could be of some help

  • ECATT Question

    Hi All,
    I needed some information related to eCATT.
    We want to upload the data for eCATT execution through an external text file.
    We have created the Test script(TS),Test Data container(TD) and the Test Configuration(TC) .
    The variants come up from the text file to the test data container when we upload through
    EDIT->VARIANTS->UPLOAD.
    We have also copied the parameters from the TD to the TS by
    EDIT->PARAMETER INTERFACE ->IMPORT.
    In the TS these parameters are assigned to the proper fields where the value needs to be populated.
    The problem is that when we run the TS these values are not getting uploaded to the parameters of the TS.
    Needed your help in solving this problem.
    Regards,
    Rupesh.

    Hi Rupesh,
    Good Check out the following documentation
    Purpose
    Use extended Computer Aided Test Tool (eCATT) to create and execute functional tests for software. The primary aim is the automatic testing of SAP business processes. Each test generates a detailed log that documents the test process and results.
    eCATT enables automatic testing in SAP GUI for Windows and SAP GUI for Java. In order to offer a complete test solution that covers other GUIs, eCATT has interfaces to third party tools.
    Implementation Considerations
    Test cases usually make database changes. Therefore, you should not normally run them in productive systems.
    In general, do not use eCATT to manipulate data in a productive system: eCATT is a test tool. Instead, use techniques such as Batch Input.
    Integration
    eCATT can be used with the Test Workbench.
    You can migrate test cases from Computer Aided Test Tool (CATT) to take advantage of the better features of eCATT.
    eCATT is also integrated with the Object Navigator (SE80).
    Features
    You can:
    ·        Test transactions, reports, and scenarios
    ·        Call BAPIs and function modules
    ·        Test remote systems
    ·        Check authorizations (user profiles)
    ·        Test updates (database, applications, GUI)
    ·        Test the effect of changes to customizing settings
    ·        Check system messages
    Constraints
    eCATT runs in a system based on SAP Web Application Server 6.20 or higher. However, you can use this system to test systems with Release 4.6C or higher.
    Check out the following documentation
    ECATT is automated testing tool developed by sap for functional testing.
    http://www.sapdevelopment.co.uk/testing/ecatt.htm
    Check my weblogs too.
    /people/community.user/blog/2007/02/05/create-and-migrate-catt-to-ecatt-part-1
    /people/community.user/blog/2007/02/06/create-and-migrate-catt-to-ecatt-part-2
    /people/community.user/blog/2007/01/22/integrating-ecatt-mercury-qtp-part-3
    /people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    extended Computer Aided Test Tool (eCATT) is use to create and execute functional tests for software.
    eCATT Tutorial
    http://help.sap.com/saphelp_sm40/helpdata/EN/fd/4f6b3f3d643b3be10000000a114084/content.htm
    Following are the individual article links on SDN for SAP eCATT Weblogs. Kindly comment on them -
    1. eCATT An Introduction(Part I)
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    2. eCATT Scripts Creation - TCD Mode (Part II)
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    3. eCATT Scripts Creation - SAPGUI Mode (Part II )
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    4. eCATT Chaining, Parameterization, Creation Of Test Data,Test Configuration, System Data (Part IV)
    /people/sapna.modi/blog/2006/04/18/ecatt-chaining-parameterization-creation-of-test-datatest-configuration-system-data-part-iv
    5. eCATT Scripts Management Via Test Workbench(Part V)
    /people/sapna.modi/blog/2006/04/13/ecatt-scripts-management-via-test-workbench-part-v
    6. eCATT Logs (Part VI)
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    7. eCATT Scripts Creation Non-User Interface Mode & Rename, Copy, Delete, Upload, Download eCATT Objects(Part VII)
    /people/sapna.modi/blog/2006/04/19/ecatt-scripts-creation-non-user-interface-mode-rename-copy-delete-upload-download-ecatt-objectspart-vii
    8. eCATT Tips Of Recording, Testing & Links (Part VIII)
    /people/sapna.modi/blog/2006/04/24/ecatt-tips-of-recording-testing-links-part-viii
    ERPGenie.COM -> The Home of SAP R3 ABAP -> ABAP utilities -> eCATT
    Extended Computer Aided Test Tool
    Working with eCATT (Extended Computer Aided Test Tool)
    (By: KVR Prasad Babu[11] , Infotech Enterprises Ltd[12] , email: [email protected][13] )
    Description:
    In this article first I will introduce some of the basic concepts regarding eCATT[14] and then we will see how to develop a test script to upload a test data file with a practical example.
    So in precise in this article you will see what eCATT is, how we can use it; how we can load a test data from a file in 4.7X and it end with an example.
    After reading this article you will have a clear idea about eCATT tool. And you will be able to write a test script in which test data can be loaded from a file.
    This article is divided into following sections,
    What is eCATT?
    How to load test data from a file in 4.7X with an example?
    What is eCATT?
    eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script.
    By using eCATT we can do following operations,
    · Test transactions, reports, and scenarios
    · Call BAPIs and function modules
    · Test remote systems
    · Check authorizations (user profiles)
    · Test updates (database, applications, GUI)
    · Test the effect of changes to customizing settings
    · Check system messages
    For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
    Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
    To develop a test script in eCATT we need to follow the following steps,
    1. Creating Test Scripts.
    2. Creating Test Data Containers[16] .
    3. Understanding System Data Containers[17] .
    4. Executing Test Configurations.
    There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
    Good Luck and thanks
    AK

  • Regarding uploading excel sheet in eCATT

    Hi,
    I would like to know how to upload excel sheet in ecatt.I am using 6.4 version.I have created a test script and test configuration.It would be great if anyone suggests me the procedure or path how to upload excel sheet to test the scripts.
    Thanks,
    Aparna.

    Hi
    See the links
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points if useful
    Regards
    Anji

Maybe you are looking for