Integrated ITS 6.40 - Connect to SAP R/3 4.6 C

Hi,
here first the tecnical details as required :
SAP-BW 3.5 SP 15
SAP R/3 46C
Web browser IE 6
Integrated ITS release 6.40 Kernel patch level 105
I am trying to establish the ITS connection in order to be able to jump from Web reports to a specific CO transaction in SAP R/3. Given my poor technical knowledge, it is not working but I have already made the following check and settings.
- in SICF, I have activated the service 'WEbgui' following the path SAP/BC/GUI/SAP/ITS.
- I have made sure in the profile of the instance that both parameters 'itsp/enable' & 'em/global_area_MB' were properly maintained.
But it is unclear to me how to maintain the entry in table TWPURLSVR. What I have done so far is the following :
- logical system corresponding to the target client in SAP R/3
- Web server of the BW instance   /sap/bc/gui/sap/its/webgui
- Web protocol : HTTP
- GUI start server of the target client in SAP R/3
When trying to make the jump from a Web report, I get the following error message stating :"http://host:port/scripts/wgate/webgui/! call was terminated because corresponding service not available."
Any help would be appreciated (and rewarded)
Thx
Stéphane Beguin

you can call a transaction of BW system using the integrated ITS.
for ex. for Txn SE38 it will be
http://host.domain.com:port/sap/bc/gui/sap/its/webgui/!?~transaction=se38
but from BW system's integrated ITS you cannot call a transaction of your R/3 system (which is on 4.6C)
if you want to call a transaction of R/3 system from your BW query you have to have a standalone ITS installed. (yes separate server).
also check out this link.
http://help.sap.com/saphelp_nw04/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm
Regards
Raja

Similar Messages

  • Reg SAP Integrated ITS in WAS

    Hi all,
       If i want to use Integrated ITS in WAS for external SAP Sytem, Do i need to install ABAP stack also???.
    Regards
    Vasu

    Hello Vasudevan,
    I am not sure if I understand you correctly, but if you are trying to connect the internal ITS from system, say, P01 to connect so system P02, that will not be possible. If that is not what you trying to do, kindly explain what you mean by "external SAP system".
    Regards,
    Jan

  • Cannot connect to SAP R/3 (datastore RD_110 using host n1.n2.n3.n4 , cli

    We use Business Objects Data Integrator 6.5 to connect to SAP R/3 system to generate ABAP extracts and load these extracts into a custom Oracle database. The current production R/3 system is in 4.6. We are planning to upgrade the R/3 system to ECC 6.0 and currently testing our interface from BODI 6.5 to R/3 6.0. We were able to successfully create a data store point to R/3. However when we execute a job, we get the following error
    Cannot connect to SAP R/3 (datastore <dsname> using host <host ip>, client <cl#>, user <uname>, and system number <0>. Please make sure the SAP R/3 server is running and login information is correct.
    The same login info was used to connect SAP GUI and it is working and we are able to execute the ABAP extractors. We have also tried running the RFC_GENERATE_AND_EXECUTE_ABAP function and it is executing as well.
    BODI is installed on Solaris and R/3 is on Aix.
    Any help with this would be greatly appreciated.
    Thanks

    We use Business Objects Data Integrator 6.5 to connect to SAP R/3 system to generate ABAP extracts and load these extracts into a custom Oracle database. The current production R/3 system is in 4.6. We are planning to upgrade the R/3 system to ECC 6.0 and currently testing our interface from BODI 6.5 to R/3 6.0. We were able to successfully create a data store point to R/3. However when we execute a job, we get the following error
    Cannot connect to SAP R/3 (datastore <dsname> using host <host ip>, client <cl#>, user <uname>, and system number <0>. Please make sure the SAP R/3 server is running and login information is correct.
    The same login info was used to connect SAP GUI and it is working and we are able to execute the ABAP extractors. We have also tried running the RFC_GENERATE_AND_EXECUTE_ABAP function and it is executing as well.
    BODI is installed on Solaris and R/3 is on Aix.
    Any help with this would be greatly appreciated.
    Thanks

  • Stack  overflow error when connecting to SRM with integrated ITS

    When I try to connect to SRM Server through Integrated ITS, it is giving me the error "Stack overview, giSAPWP  is null or not an object. Kindly let me know how to resolve the error.

    Hi Arun,
    Are you running with Portal ?
    If yes, could you confirm the following point :
    - portal and ITS of the SRM system run under the same protocol (both under http or https, ELSE it is not possible),
    - portal and ITS of the SRM system are in the same domain
    Kind regards,
    Yann

  • ALV GRID  and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

    Hi All,
    We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
    We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
    We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
    If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
    We are on Basis Patch level 15.
    Does anyone have any ideas on how to fix this?
    Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
    Thank you so much!
    -Kevin

    Hi,
    Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
    Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
    If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
    Thanks!
    -Kevin

  • Is Integration Kit from BO edge with DI (NUL) able to connect with SAP

    Could any help me:
    I have BO edge with DI (10 NUL) and it has integration kits for SAP
    I would like to know that i'd like to know that Is it possible that I implement ETL using DI connect to SAP without purchase other BO contents
    Regards,
    Haruthairat.h

    Hi,
    this is what is called a Rapid MArt.
    You would use Data Services to extract the data and load it into SQL Server
    You would then use a Universe on top of SQL Server and create you reports.
    Rapid Marts has all this pre-build for several SAP modules.
    Ingo

  • Integration of  Adobe Connect and SAP Enterprise Portal

    Hi All,
      Is it possible to integrate Adobe Connect with SAP Enterprise Portal?
    If so , how it can be done? Provide me with some details , links and materials.
    Regards,
    Eben.

    HI,
    Yes, this is Possible.  You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
    Thanks and Regards
    Puneet

  • Some problem about integrated ITS 640

    How to change Webgui theme in integrated ITS 640
    Dear all ,
    My system is ECC5,the Package level it SAPKGPRC05,SAPKB64015,SAPKA64015,SAPKH500010.
    now, I configure  integrated ITS with T-code SICF .
    I create a external aliases "/sap/bc/gui/sap/its/webgui" ,aAfter that I can connect to the
    ITS with the following URLs:
    http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
    But now ,I have some problem cannot solve as follow:
    1 When I logon ITS, the default language is English ,only English and Genman may be
    selected,The requirement is that I want to use other language as the default logon language.
    When I on the pop-up dialog box "Change External Alias" tab " Service data" ,"Anymous Logon
    Data "select a Language "Chinese",the system pop-up a message box show "code page not
    supported".how can i configure the default logon language ?
    2 I hope use "https"-- Security Reqiurements ,as a security link ,so I selected "SSL",aAfter
    that I can connect to the ITS with the following URLs:
    https://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
    IE show cannot find the web system .
    And use the following urls:
    http://<AppServer><domain>:<port>//sap/bc/gui/sap/its/webgui
    only show the logon page and notice the error "Logon not possible; none of the active logon
    procedures is possible"
    and how can I configure the "https" ? and must configure with se38 "W3_PUBLISH_SERVICES"
    program together ,if like that ,i must republish all of the component again ?
    3 I hope change the webgui theme , in ITS620 have theme 00,90 ,99 .and we can select
    "EnjoySAP". but in integrated ITS 640 , i donot know where to find the its admin page to
    setup the theme . can you tell me how can i find the admin page to setup the theme .
    thanks all ,hope your reply !
    Message was edited by:
            Benson Lu

    Hi,
    Hope this Information is useful.
    The SAP Integrated ITS only supports the new "Tradeshow" design (unlike the "standalone" ITS which also supports the well-known EnjoySAP design). The new design is more easily incorporated into the Enterprise Portal and is better adapted to the design of other SAP Web UI technologies (BSP, WebDynpro).
    There are also changes to the header area in SAP integrated ITS in Tradeshow: The menu bar and standard toolbar functions are collected on either side of the transaction code field in the buttons "Menu" (on the left) and "System" (on the right). The application toolbar elements are then displayed to the right. Instead of symbols, the system displays the text description. If there is insufficient space to display all buttons, you can display the other elements by choosing the "More" button to the right of the screen.
    Exceptions:
    In Release 6.40 (NetWeaver 2004) , the new design is only available for the Internet Explorer. As of Release 7.00 (NetWeaver 2004s), it is also available for Firefox and Mozilla Browser. For this reason, the Enjoy design continues to be supported for Mozilla and Firefox in Release 6.40 (but only for these browsers, and even then only for this design, and not Tradeshow).
    Furthermore, in Release 6.40, there are some Internet Application Components (that is, Web applications that build on the ITS), which continue to be displayed with the "Enjoy" design. Of course, the "Enjoy" design continues to be supported for these applications.
    You can use SITSPMON Transaction  to monitor the integrated ITS.
    Thanks,
    Tanuj

  • Integrated ITS : Session killed but memory still reserved

    Hi,
    I'm a basis guy, new to portal technology.
    Our users launch webdynpro  from EP6 Portal, the HTTP request our SAP ECC6  system (web as kernel 700) with integrated ITS. One of the user session has been lauchned yesterday, and was still running this morning that lead to a memory bottleneck. Because of that no more HTTP user was able to logon to the application server.
    The user session has therefore been killed using transaction sm04, now the users ara able to reach again the server.
    BUT, in transaction SITSPMON I can see that the memory session has not been entirely released, the ITS session still appear (without hte user name)
    same thing in transaction ST02, where 80% of the extended memory is used with ... 3 users connected.
    I have already checked sap note Note 742048 (- Integrated ITS, memory requirement in application server), our memory parameters doesn't seem to be the problem (em/global_area_MB  =1024 ).
    My question : Is there an other way to kill an ITS session ?
    How can I retrieve the used memory ?
    Any useful help would be highly appreciated.
    Best Regards.

    Hi,
    I'm a basis guy, new to portal technology.
    Our users launch webdynpro  from EP6 Portal, the HTTP request our SAP ECC6  system (web as kernel 700) with integrated ITS. One of the user session has been lauchned yesterday, and was still running this morning that lead to a memory bottleneck. Because of that no more HTTP user was able to logon to the application server.
    The user session has therefore been killed using transaction sm04, now the users ara able to reach again the server.
    BUT, in transaction SITSPMON I can see that the memory session has not been entirely released, the ITS session still appear (without hte user name)
    same thing in transaction ST02, where 80% of the extended memory is used with ... 3 users connected.
    I have already checked sap note Note 742048 (- Integrated ITS, memory requirement in application server), our memory parameters doesn't seem to be the problem (em/global_area_MB  =1024 ).
    My question : Is there an other way to kill an ITS session ?
    How can I retrieve the used memory ?
    Any useful help would be highly appreciated.
    Best Regards.

  • How to use the integrated ITS server in WAS6.40 for WEBGUI

    Hi,
    I am testing the Portal 6.0SP6 on WAS6.40SP7.
    Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system.  If I am going to use webgui to call a transaction, do I need the ITS server at all?  The reason I asked because I thought WAS6.40 came with an embedded ITS server.
    If I can make use of the integrated ITS server, how do I configure the system connection?
    Thanks,
    Edmond wong

    I have read the past posts, but I am still not clear... We are implementing mySAP ERP 2004.  This will include ECC 5.0 and EP 6.2. 
    We currently have R/3 4.6C and EP5.5.  From EP 5.5 I have users executing R/3 transactions directly from EP using the standard Master iView.  This traffic goes via the ITS virtual instance for the R/3 system.
    I am trying to decide if I need to setup a separate ITS to continue to do what we do now OR if the direct call of a transaction from EP6.2 using the SAP supplied Master iView can be accomplished using the Internal ITS on ECC 5.0.  We do not have the DEV systems set up so I cannot test.
    Any comments?
    Thanks,
    Rich

  • Log off problem in integrated ITS

    Hi,
    our cancel button for ending the application with an external ITS works fine and the exitURL which is deposit in the service file will be shown.
    But with an integrated ITS it doesn't work. I know that this exitURL doesn't work in an integrated ITS.
    So I left a redirect URL in the SICF > ErrorPages > Log Off Page > Redirected URL
    but nothing happens after clicking the cancel button. The browser works and works but the old screen is still seen. What's wrong? Why the page will not be redirected to given Url?
    Can anybody help me?
    This works:
    wgateURL(~command="logoff", ~exitURL="http://www.sap.com")
    but we need a standard exit like described above and I think the way above should be right.
    Thanks, Susanne

    This was discussed recently.
    check out this thread
    Close the IE page on click of a button in the transaction
    Regards
    Raja

  • Setting up a https connection between SAP CRM and genesys gplus adapter

    Hello All-
    We are integrating SAP CRM with genesys mysap gplus adapter. We are struck in setting up a https connection between sap and gplus adapter.
    Can anyone here help me out in this like how to get the SSL Protocol, keystore, keystore password,truststore and truststore password.
    Information abt Adapters server certificate. Do we need to configure the adapter for the proxy also?
    Any additional comment will help. Thanks in advance!

    Hello Vinod,
    Please refer the following OSS notes 564085.
    Please reward if helpful.
    regards,
    Muralidhar Prasad.C

  • Configure SSO Connection from SAP Enterprise Portal to BOE Server

    Hi Guys,
    We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
    SAP EP with AD Authentication
    SAP EP configured with SNC to SAP BI7 system
    SAP BOE XI 3.1 - SAP Integration Kit
    BOE Server configured with SAP Authentication via SAP BI7 System
    We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
    Let me know if this is at all possible

    Hi,
    You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
    If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
    For more details check BOXI Admin guide and SAP Integration Guide.
    Thanks,
    Muhammad

  • Problem in connection from SAP to XI

    Hi Guys,
    I have problem to connect from SAP to XI.  We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing ‘No Connection to Integration Builder’. Please kindly advice what configuration we need to in SAP side in order to connect XI.
    It’s Very Urgent. Please advice me.
    Thanks in Advance.
    Regards,
    Anil.

    Anil,
    could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
    Cheers,
    -Sunil

  • HTML Templates in integrated ITS

    Hi,
    I am using certain ITS services in integrated ITS. However, their look and feel is like WebGUI. For two of the services, there are HTML templates defined but still their look and feel is like WebGUI. If I do not definr ~GENERATEDYNPRO = 1, then I get an internal error. If I use this parameter, then the look and feel is SAP like.
    Any pointers?
    Thank you.
    Abhijeet.

    Hi abhijeet,
    Set by Service file
    ~ generateDynpro = 0 -Automatic screen generation 
                          disabled.
                       1 -Automatic screen generation
                          enabled.
    can you re-publish service again on your ITS and re-start ITS server and test this.
    Please share the result.
    Thnx,
    Suriya.

Maybe you are looking for