Integrated ITS in a Separate App Server (DI) for Security and LoadBalancing

Hi Experts,
I have a specific requirement for ITS Configuration.
1. Production Server ( CI + DB ) -> Existing
[ ERP6.0 ]
OS : Solaris 10
DB : oracle 10.2.0.2
H/W: PRIMEPOWER650
Unicode Enabled
2. Application Server ( DI ) --> to be made ( and to be used exclusively for Web users)
OS : Windows2003 sv
H/W: RX200 S3
x64
MEM: 8GB
No. 1 is existing Production Server Environment.
The Customer Requirement.
The Customer wants to use the ITS . But he doesn't want the existing Production Server to be disturbed for the same for 2 reasons. [ Security and Load Balancing ]
We are planning to create a Separate Application Server (DI) to work as ITS.
As the Kernel is 700. The ITS is integrated into the Production Server by Default.
We have written to SAP and have asked whether the Production Server ITS can be disabled and the Separate DI's ITS be enabled so that the NEW ( No.2 ) Application Server will be used for ITS activities.
SAP has replied saying the Integrated ITS cannot be disabled at the Production Server. Instead as an alternative we can create a Logon Group (using transaction SMLG) and divert all the Web users to the Separated DI (No.2). We have decided to go according to SAP.
Now I have the following questions :
1. The Operating Systems of the Production Server (No.1) and the Separate AP (No. 2)
are different. ( Are there any complexities involved or must do points to be taken care. )
2. Brief / MUST DO tasks at the Production Server Environment and Must do tasks at the DI Environment.
I hope someone has already done some few installations on the above combination, if so, request to please share me your ideas.
Thanks in anticipation
Best Regards,
Paguras
PS :
my earlier discussion on the same topic on this community.
ITS Specific Requirement

Hi Markus,
Thanks for the Reply.
We have the following 2 plans :
Plan-01.
As you have advised, we will try to disable ITS of CI and enable ITS of DI.
Plan-02.
If Plan-01 could be worked out successfully, well implement as per SAP suggests. Creating a Logon Group and divert all the web users to the DI alone.
To deactivate ITS on CI, you have mentioned to make sure, that the system does not listen on the HTTP port (transaction SMICM) on the Servers
BTW, I have seen a parameter called <b>ITSP/ENABLE</b>. if we deactivate this parameter at CI & DB and then activate the same parameter at DI.
My questions to you :
1. Shall we go for Plan-01 ignoring what SAP OSS has said. ?
2. Disable ITSP/Enable Parameter -> CI & DB
Enable ITSP/Enable Parameter -> DI has to be implemented .
Thanks & best Regards,
Paguras
PS: Sorry for always pounding you with so many questions on the same topic.
SAP Help on ITSP / enable parameter
itsp/enable
You use this parameter to deactivate (0) or activate (1) the integrated ITS. Even if the integrated ITS is activated, it only accesses system resources when it is actually used. Nevertheless, it can make sense to deactivate it to prevent users from accessing the SAP system with SAP GUI for HTML via special application servers (such as batch or update instances). Since the conversion of SAP screens into HTML pages uses additional CPU time, it makes sense to reserve a number of dedicated application servers to be used with SAP GUI for HTML and to use a special logon group to balance the load between them.

Similar Messages

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

Oracle equivalent of SQL Server's "FOR XML" and "OPENXML"

Hi
Can someone please tell what are the Oracle's equivalent of SQL Server's "FOR XML" and "OPENXML" features?

Probably you can try General XML forum General XML
Gints Plivna
http://www.gplivna.eu

Iphone app asked me for username and password. how can i find this? it seems deferent than the apple id or i tune store username!

iphone app asked me for username and password. how can i find this? it seems deferent than the apple id or i tune store username!

Which iPhone app?
Don't just enter usernames and passwords into apps unless you know what it is for and why it wants it.

I registered on icloud from my gmail and now when i log on icloud and type password its say your account is been blocked for security reasons.when i reset be email its just send on email but wich email i dont remember.i have @icloud email pls help

(https://iforgot.apple.com i registered on icloud from my gmail and now when i log on icloud and type password its say your account is been blocked for security reasons.when i reset be email its just send on email but wich email i dont remember.i have @icloud email pls help

drop the CAPS thats rude.
iforgot.apple.com there is a link for find my apple id click here
https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
Peace, Clyde

I recently left my computer at a hospital by mistake. I have find my phone app and then noticed that app also works for ipad and mac. Does it work with Snow Leopard?

I recently left my computer at a hospital by mistake. I have find my phone app and then noticed that app also works for ipad and mac. Does it work with Snow Leopard?

No.
The iCloud services require 10.7.5, or higher.

Separate Apps ... Separate App Server Installations?

We are purchasing Oracle App Server. Can 2 separate applications utililize a single installation of App Server? If not, can the separate installations either be on 2 separate physical servers or 2 virtual servers?
Thanks

Thanks for your response - I'll try to be more clear.
We have 2 applications - App A and App B. Each uses Oracle Application Server (OAS) AKA Internet Application Server (IAS). We have Server1 with OAS/IAS installed on it. Can App A and App B each use the OAS/IAS installation on Server1 or does App A need to run on Server1 and App B on Server2?

Problem in integrating sunone webserver with websphere app server

Hello all
I am trying to integrate sunone6.0 webserver with websphere5.0 app server. I did the following changes in sunone6.0 config files
1) Added one directive to the obj.conf file after "<Object name=default>":
Service fn="as_handler"
2) Added two directives to the end of the magus.conf file:
Init fn="load-modules" funcs="as_init,as_handler,as_term" shlib="/opt/WebSphere/AppServer/bin/libns41_http.so"
Init fn="as_init" bootstrap.properties="/opt/WebSphere/AppServer/config/cells/plugin-cfg.xml"
Can any one of u tell me how to check whether sunone webserver is redirecting request to webshere app server?
i tried this url https://sunonewebserver:80/webapps/examples but i was not getting any result of that url.

You might want to check here http://developers.sun.com/prodtech/webserver/
and here http://developers.sun.com/
These have forums and articles devoted to specific Sun products

High Availibity solution for office web app server 2013 for Sharepoint 2013

I have a scenario with the three nodes SP1 , SP2 and DR-SP with server 2012 standard, each running SharePoint 2013 enterprise, All of three nodes are members of single SharePoint farm that spans two data centers.Primary Data Center have two nodes SP1 , SP2
and DR data center have one node DR-SP of share point 2013.
For Office webapp server i have two nodes OWA1, and DR-OWA with server 2012 standard, that spans between two data centers.Primary Data Center have OWA1 and DR data center have one node DR-OWA of office web app server.
Currently i have configured office web app on primary data center node OWA .How i can enable high availability of office web app server in case of primary data center outage.Please guide.

WAC servers on a single farm must be in the same data center. The WAC configuration you've proposed is unsupported. Build a separate WAC farm in the secondary data center and attach it to the SharePoint farm only in the event of a disaster.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to make the App Server Listen for HTTPS

I have a web application that needs to be accesible over an HTTPS connection, not HTTP.
When I deploy an application with Java Studio Creator to the App Server it is automatically set to an HTTP URL. How do I setup HTTPS ?
Thank you in advance,
Joe Paladin

Looks like I should have thanked myself in advance....
Turns out its pretty easy. Open the admin console, go to configuration, add and HTTP listener, check the security check box, and fill out the other mandatory fields like the port. Standard SSL port is 443.
Save changes, and restart the App Server. Any deployed apps should be reachable via https://localhost:443/myWebApp
This approach uses a default certificate that comes with the app server. Here is a link if you want to create a certificate :
http://java.sun.com/developer/technicalArticles/WebServices/appserv8-1.html
Joe Paladin

Office Web Apps Server Certificate For External

Hi guys,
I am requesting a DigiCert certificate for my environment Exchange 2013.
Can I include the SAN name for Office Web Apps server, such as externalowa.domain.com in to the Exchange generated certificate?
From theory wise it seems logic, but kind of uncertain.
Thanks and Regards,
Low.

Hi Nithyanandham,
Thanks for the prompt reply
I will just list down what I did to be more clear.
I generated a CSR from Exchange 2013 with the following
Webmail.domain.com - for Outlook Web Access, Outlook Anywhere, ActiveSync
Autodiscover.domain.com - for AutoDiscover purposes
Can I include the externalowa.domain.com, which is for Office Web Apps server
Reason is because the Exchange server and Office Web Apps server is located differently. Am I doing the correct way?
Thanks and Regards,
Low

Server 2012 r2 essentials...urgent help needed...Two separate DHCP servers, one for lan and one for wifi...design picture attached

hello
S2012 R2 essentials is in office...Want to have functional 2012 dhcp, dns, ad, wds role for 1gbps wired lan and separate wi-fi for temporary visitors for internet access like gsm phones etc...Need functional anywhere access to office server and computers
for administering...When worker with laptop go out of office must have have full functional wifi.
here is picture what i have in my mind with all components in network.
How to configure L3 switch, router and server? Many thanks

Hi,
Based on your description, I understand that you want to prepare network for the Windows Server 2012 R2 Essentials,
then will run a DHCP Server on the Windows Server 2012 R2 Essentials and correctly configure router. Please refer to following article and check if can help you.
Before You Install Windows Server 2012 Essentials
For DHCP, please refer to following article.
Running
DHCP Server on Windows Server 2012 Essentials
For router configuration, please refer to following article.
Configure a Router - Windows Server Essentials
If anything I misunderstand or any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Deployement problem in Oracle App Serv with hibernate + JPA and Spring

Dear All,
     I am facing a problem in deployment of a web application in oracle application server 10g. but the same is working fine with Tomcat. The following Exception. Is being thrown.
     Failed to deploy web application "OraTest". Failed to deploy web application OraTest". . Nested exception Resolution:
Base Exception:
java.rmi.RemoteException
deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Unknown assembly root-tag attribute: version. deploy failed!: ; nested exception is:
oracle.oc4j.admin.internal.DeployerException: Unknown assembly root-tag attribute: version     I am using the following technologies
1.     Spring 2.0.7
2.     Struts 2.0.9
3.     Hibernate 3.3
4.     JPA 1.0
5.     Oracle App Server 10.1.2.0.2
Web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <display-name>My Application</display-name>
     <filter>
          <filter-name>struts2</filter-name>
          <filter-class>
               org.apache.struts2.dispatcher.FilterDispatcher
          </filter-class>
     </filter>
     <filter-mapping>
          <filter-name>struts2</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>
     <welcome-file-list>
          <welcome-file>/index.jsp</welcome-file>
     </welcome-file-list>
     <servlet>
          <servlet-name>dwr-invoker</servlet-name>
          <servlet-class>
               org.directwebremoting.servlet.DwrServlet
          </servlet-class>
          <init-param>
               <param-name>debug</param-name>
               <param-value>true</param-value>
          </init-param>
     </servlet>
     <servlet-mapping>
          <servlet-name>dwr-invoker</servlet-name>
          <url-pattern>/dwr/*</url-pattern>
     </servlet-mapping>
     <listener>
          <listener-class>
               org.springframework.web.context.ContextLoaderListener
          </listener-class>
     </listener>
     <context-param>
          <param-name>contextConfigLocation</param-name>
          <param-value>
               /WEB-INF/conf/spring/datasource-context.xml,
               /WEB-INF/conf/spring/aop-context.xml
          </param-value>
     </context-param>
</web-app>
/Datasource-context.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:aop="http://www.springframework.org/schema/aop"
    xmlns:tx="http://www.springframework.org/schema/tx"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
    http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd
    http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd">
     <bean class="org.springframework.orm.jpa.support.PersistenceAnnotationBeanPostProcessor" lazy-init="true"/>
     
        <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource" lazy-init="true">
          <property name="driverClassName">
               <value>oracle.jdbc.driver.OracleDriver</value>
          </property>
          <property name="url">
               <value>jdbc:oracle:thin:@//xxx.xxx.xxx.xxx/mydb</value>
          </property>
          <property name="username">
               <value>admin</value>
          </property>
          <property name="password">
               <value>admin</value>
          </property>
     </bean>
     
     
     <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean" lazy-init="true">
          <property name="persistenceUnitName" value="mkclsetsPersistenceUnit"/>
          <property name="dataSource" ref="dataSource"/>
          <property name="jpaVendorAdapter">
               <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter" lazy-init="true">
                    <property name="database" value="ORACLE"/>
                    <property name="showSql" value="true"/>
               </bean>
          </property>
     </bean>
     <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager" lazy-init="true">
          <property name="entityManagerFactory" ref="entityManagerFactory"></property>
     </bean>
     <tx:annotation-driven transaction-manager="transactionManager"/>
</beans>Aop-context.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:aop="http://www.springframework.org/schema/aop"
    xmlns:tx="http://www.springframework.org/schema/tx"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
    http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd
    http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd">

     <bean id="methodLoggingAdvice" class="com.mkcl.sets.common.interceptor.MehodLogInterceptor"/>
     
      
     <bean id="methodCachingAdvice"
          class="com.mkcl.sets.common.interceptor.MethodCacheInterceptor">
          <property name="cache">
               <ref local="methodCache" />
          </property>
     </bean>
     <bean id="cacheManager"
          class="org.springframework.cache.ehcache.EhCacheManagerFactoryBean">
          <property name="configLocation">
               <value>WEB-INF/conf/other/ehcache.xml</value>
          </property>
     </bean>
     <bean id="methodCache"
          class="org.springframework.cache.ehcache.EhCacheFactoryBean">
          <property name="cacheManager">
               <ref local="cacheManager" />
          </property>
          <property name="cacheName">
               <value>mkclSetsCache</value>
          </property>
     </bean>
     
     <aop:config>
          <aop:pointcut id="getCountriesPointCut" expression="execution(* com.mkcl.sets.dao.master.impl.LocationDAOImpl.getCountries())"/>
          
          <aop:pointcut id="methodLogPointCutDao" expression="execution(* com.mkcl.sets.dao..*.*(..))"/>
          <aop:pointcut id="methodLogPointCutService" expression="execution(* com.mkcl.sets.service..*.*(..))"/>
          <aop:advisor id="methodCachingAdvisor" advice-ref="methodCachingAdvice" pointcut-ref="getCountriesPointCut"/>
          <aop:advisor id="methodLoggingAdvisorDao" advice-ref="methodLoggingAdvice" pointcut-ref="methodLogPointCutDao"/>
          <aop:advisor id="methodLoggingAdvisorService" advice-ref="methodLoggingAdvice" pointcut-ref="methodLogPointCutService"/>
     </aop:config>
</beans>Persistence.xml
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
    version="1.0">
     <persistence-unit name="mkclsetsPersistenceUnit" transaction-type="RESOURCE_LOCAL">
          
          <provider>org.hibernate.ejb.HibernatePersistence</provider>
          
     </persistence-unit>
</persistence>Do I need to add some other configuration in the existing files or do I need to add some other configuration files ? Please help to deploy my application.
Thanks a lot in advance.
With Best Regards,
Ishaan
null

Did you ever find a solution to this Ishaan?
I imagine you ended up having to upgrade 10gR2 to 10gR3 at least. Correct?

App. server Certification for OCP DBA

Greetings !!!!!!!!!
I am OCP Database Administrator in 10g,9i,8i and now I am planning to take the certification in App Server.
Can someone please tell me which exam should I write to get app server certified?
Do I need to write two exams or only with one exam I can get the app server certification?
Thanks in Advance !!!!!!!!!!
Regards
null

There are two exams to get OCP Application server 10g DBA similar to the OCP Database 10g exams. The exam names are
Oracle 10g Application server Administration I
Oracle 10g Application server Administration II
If you clear the first exam you get 'Oracle Certified Associate OCA' certificate and after clearing the second exam and attending a Application Server Administration training from Oracle University will fetch you the 'Oracle Certified Professional OCP' certificate.
This is similar to the Oracle Database 10g OCP DBA program.
To get more details you can follow the link,
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=141#middleware
Sami Malik
[email protected]

Final Cut Server is for video and photo archiving?

Too many products in the last few years. I used to use iPhoto to archive both photos and video and edit them. Now I have moved to the professional line but it gets more confusing.
Aperture2: archiving and cataloguing thousands of pictures with minor edits
Adobe CS4: major edits to my pictures
FCP6: video edit but with no archiving and/or metadata capability
Final Cut Server: for what? Can it archive/metadata all my video and all my Aperture files and work
seamlessly between all these four programs?
Please help. I am considering buying Final Cut Server. I am both a photographer as well as a videographer running many different cameras over many different kinds of shoots. And I am trying to simplify my work process.
Thanks,
Brian

We were in a similar situation as well.
We use Adobe products for photo and desktop stuff
and FCP Suite for video.
We ingest images with Bridge and add keywords.
The raw files are backed up and the corrected images
are processed (Photoshop/Image Processor) and dropped
into a Final Cut Server watch folder.
This action automatically adds the files to FCS for
easy access as well as backs up the images to an
external FTP in our desktop publishing office across
town. Desktop has its own version of FCS that adds
the new files and makes them available for designers.
When we shoot video we shoot mainly with Sony EX3
camcorders with SxS media. Footage is downloaded
and tagged in XDCAM Transfer. The folder that is
labeled "Import" in the utility is also a watch
folder which added the files to FCS.
So in other words Final Cut Server has us organized
and working together much better than we were before.

Integrated ITS in a Separate App Server (DI) for Security and LoadBalancing

Similar Messages

Maybe you are looking for