Integrated Planning - trying to load data from basic to realtime cube

I have created a mulitprovider for my basic and realtime cube, and trying to copy data from basic to realtime using standard copy function in IP. It is not erroring out but data is not getting copied either. Both cubes having exactly the same structure. I can do a export datasource or a BPS multiplanning area..but I need a solution in IP..Any help would be appreciated...Thanks much..

Infoprovider --> Multiprovider
Agg Level --> Selected fields need to be copied
Filter --> None selected, wanted to copy as is
Pl. Fnc --> Standard Copy.
                char usage: Selected infoprovider for 'changed'
                to parameters: selected all key figs ( percent and amount)
                from and to values: Basic to realtime
Let me know.

Similar Messages

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

How to load data from a ODS to CUBE Request ID - by - Request ID?

<i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

Error While loading data from 8 DSOname to Cube.

Hi All,
while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
Thanks and Regards,
santosh.

HI All,
In ST22 i'm getting Short Dump, the Error massage is
MESSAGE_TYPE_X
WHAT HAPPEN
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error Analyis is:
Short text of error message:
Generic process chain
Long text of error message:
Technical information about the message:
Message class....... "RSMPC"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
"MESSAGE_TYPE_X" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
"IF_RSPC_EXECUTE~EXECUTE"
there is any Patch Problem...
Please let me Know how to resolve this issue.
thanks and regards,
santosh.

Errror while loading data from dso to info cube....

Hi All,
When i am running dtp from dso to cube i get a error i.e :
1. Data package processing terminated
     Message no. RSBK229
2. 'Processed with Errors'
     Message no. RSBK257
3. Error while updating to target 0FIGL_C10 (type INFOCUBE)
    Message no. RSBK241.
     So these are the errors i am getting , i am new to BI so how could i solve this errors....
     All the transformation are active with no errors.
Thanks in Advance
Regards,
Mrigesh.
Edited by: montz2006 on Dec 7, 2009 8:45 AM

Hi All,
Now i deleted data from dso and data source and again run the dtp,
this time i got data from data-source to dso but , when i am running dtp between dso and cube , i am not finding an error.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
Regards,
Mrigesh.

Error when trying to load data from one cube to another

Hi Friends
I am getting an error when using extractor checker for datamart data source. The cube in question is compressed. this is what i get when i view the logs.
SQL Error: 575-
SQL0575N View or materialized query table "SAPBWP./BIC/VZTCOOMC02F" cannot be used because.
Please help
Thanking you in anticipation
Samuel

Rememberme -
No, the SAP_FACTVIEWS_RECREATE program cannot and will not uncompress the data. A fact view exists for every infocube which combines the E and F fact tables. You can see this view using SE11 -> View -> /bic/vxxxxf (where xxxxx is your infocube tech name). When you run this program this view is dropped and recreated thus eliminating any incosistencies that lead to the error posted in this thread.
Hope this helps!

Long time to load data from PSA to DSO / CUBE. Sequential read RSBKDATA_V

Hi Gurus
The process stays for several hours on sequential read from RSBKDATA_V - temporary storage for DTPs.
After several hours, the processing finally starts, but even when I assign several BGDs to the DTP it takes hours to load the data.
We have BI7.0 with SP22, so all relevant notes are already implemented.
Does any one had similar problem, please?
Thanks in advance
Martin

Hi Martin,
this issue has cropped up a few times. Please check and implement the following notes:
1338465    P22:DTP:LOG: Performance problem when messages are added +
1331544    P22:HINT:Slow performance when accessing RSMONFACT +
1312701    70SP21: Performance on view RSBKDATA_V selects
1304234    70SP21: Performance on the hashed table p_th_rsbkdata_v **
1168098    70SP19: Performance during DataStore object extraction
1080027    70SP16: Performance during parallel processing
These notes should improve the performance of the DTPs in your system.
After you've added the notes, please check in tables RSBKDATA and RSBKDATAINFO whether they contain any data. If the tables are empty, please reorganise the tables, and restart the dtp.
Hope this helps you.
Rgds,
Colum

ODI Error when Loading data from a .csv file to Planning

Hello,
I am trying to load data from a csv file to planning using ODI 10.1.3.6 and I am facing this particular error. I am using staging area as Sunopsis memory engine.
7000 : null : java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
     at com.sunopsis.jdbc.driver.file.bb.b(bb.java)
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.w.b(w.java)
     at com.sunopsis.jdbc.driver.file.w.executeQuery(w.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Code from Operator:
select     Account     C1_ACCOUNT,
     Parent     C2_PARENT,
     Alias: Default     C12_ALIAS__DEFAULT,
     Data Storage     C3_DATA_STORAGE,
     Two Pass Calculation     C9_TWO_PASS_CALCULATION,
     Account Type     C6_ACCOUNT_TYPE,
     Time Balance     C14_TIME_BALANCE,
     Data Type     C5_DATA_TYPE,
     Variance Reporting     C10_VARIANCE_REPORTING,
     Source Plan Type     C13_SOURCE_PLAN_TYPE,
     Plan Type (FinStmt)     C7_PLAN_TYPE__FINSTMT_,
     Aggregation (FinStmt)     C8_AGGREGATION__FINSTMT_,
     Plan Type (WFP)     C15_PLAN_TYPE__WFP_,
     Aggregation (WFP)     C4_AGGREGATION__WFP_,
     Formula     C11_FORMULA
from      TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=Account.csvSNP$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csvSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=2CSNP$CRFILE_SEP_LINE=0D0ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=AccountSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=ParentSNP$CRTYPE_NAME=STRINGSNP$CRORDER=2SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Alias: DefaultSNP$CRTYPE_NAME=STRINGSNP$CRORDER=3SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data StorageSNP$CRTYPE_NAME=STRINGSNP$CRORDER=4SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Two Pass CalculationSNP$CRTYPE_NAME=STRINGSNP$CRORDER=5SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Account TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=6SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Time BalanceSNP$CRTYPE_NAME=STRINGSNP$CRORDER=7SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=8SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Variance ReportingSNP$CRTYPE_NAME=STRINGSNP$CRORDER=9SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Source Plan TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=10SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=11SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=12SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=13SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=14SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FormulaSNP$CRTYPE_NAME=STRINGSNP$CRORDER=15SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CR$$SNPS_END_KEY*/
insert into "C$_0Account"
     C1_ACCOUNT,
     C2_PARENT,
     C12_ALIAS__DEFAULT,
     C3_DATA_STORAGE,
     C9_TWO_PASS_CALCULATION,
     C6_ACCOUNT_TYPE,
     C14_TIME_BALANCE,
     C5_DATA_TYPE,
     C10_VARIANCE_REPORTING,
     C13_SOURCE_PLAN_TYPE,
     C7_PLAN_TYPE__FINSTMT_,
     C8_AGGREGATION__FINSTMT_,
     C15_PLAN_TYPE__WFP_,
     C4_AGGREGATION__WFP_,
     C11_FORMULA
values
     :C1_ACCOUNT,
     :C2_PARENT,
     :C12_ALIAS__DEFAULT,
     :C3_DATA_STORAGE,
     :C9_TWO_PASS_CALCULATION,
     :C6_ACCOUNT_TYPE,
     :C14_TIME_BALANCE,
     :C5_DATA_TYPE,
     :C10_VARIANCE_REPORTING,
     :C13_SOURCE_PLAN_TYPE,
     :C7_PLAN_TYPE__FINSTMT_,
     :C8_AGGREGATION__FINSTMT_,
     :C15_PLAN_TYPE__WFP_,
     :C4_AGGREGATION__WFP_,
     :C11_FORMULA
Thanks in advance!

Right-clicking "data" on the model tab can you see the data?
In your code there's written:
P$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csv
Is it right the double slash before the file name?

Error Loading data from oracle to flat file in oracle data integrator

Hi All,
I m trying to load data from oracle database to flat file.But I am getting the error at step "Insert new row"(integration)
Error Message is:
7000 : null : com.sunopsis.jdbc.driver.file.b.i
com.sunopsis.jdbc.driver.file.b.i
     at com.sunopsis.jdbc.driver.file.b.d.setDate(d.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I m nt able to find out the exact reason.Can anyone help me in that.

yes...I got the mistake which i was doing.Actually the target file data type should be string and I was defined it diffrent for each column.
When I chnged the data type to string,data get loaded to target table.
Thanks for your reply.

Using FDM to load data from oracle table (Integration Import Script)

Hi,
I am using Integration Import Script to load data from oracle table to worktables in FDM.
i am getting following error while running the script.
Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done
Attaching the full error report
ERROR:
Code............................................. -2147217887
Description...................................... Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
At line: 22
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 6260
IDENTIFICATION:
User............................................. ******
Computer Name.................................... *******
App Name......................................... FDMAPP
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... DBNAME
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... SCRTEST
Location ID...................................... 750
Location Seg..................................... 4
Category......................................... FDM ACTUAL
Category ID...................................... 13
Period........................................... Jun - 2011
Period ID........................................ 6/30/2011
POV Local........................................ True
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
I am using the following script
Function ImpScrTest(strLoc, lngCatKey, dblPerKey, strWorkTableName)
'Oracle Hyperion FDM Integration Import Script:
'Created By: Dhananjay
'Date Created: 1/17/2012 10:29:53 AM
'Purpose:A test script to import data from Oracle EBS tables
Dim cnSS 'ADODB.Connection
Dim strSQL 'SQL string
Dim rs 'Recordset
Dim rsAppend 'tTB table append rs object
'Initialize objects
Set cnSS = CreateObject("ADODB.Connection")
Set rs = CreateObject("ADODB.Recordset")
Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)
'Connect to SQL Server database
cnss.open "Provider=OraOLEDB.Oracle.1;Data Source= +server+;Initial Catalog= +catalog+;User ID= +uid+;Password= +pass+"
'Create query string
strSQL = "Select AMOUNT,DESCRIPTION,ACCOUNT,ENTITY FROM +catalog+.TEST_TMP"
'Get data
rs.Open strSQL, cnSS
'Check for data
If rs.bof And rs.eof Then
RES.PlngActionType = 2
RES.PstrActionValue = "No Records to load!"
Exit Function
End If
'Loop through records and append to tTB table in location’s DB
If Not rs.bof And Not rs.eof Then
Do While Not rs.eof
rsAppend.AddNew
rsAppend.Fields("PartitionKey") = RES.PlngLocKey
rsAppend.Fields("CatKey") = RES.PlngCatKey
rsAppend.Fields("PeriodKey") = RES.PdtePerKey
rsAppend.Fields("DataView") = "YTD"
rsAppend.Fields("CalcAcctType") = 9
rsAppend.Fields("Amount") = rs.fields("Amount").Value
rsAppend.Fields("Desc1") = rs.fields("Description").Value
rsAppend.Fields("Account") = rs.fields("Account").Value
rsAppend.Fields("Entity") = rs.fields("Entity").Value
rsAppend.Update
rs.movenext
Loop
End If
'Records loaded
RES.PlngActionType = 6
RES.PstrActionValue = "Import successful!"
'Assign Return value
SQLIntegration = True
End Function
Please help me on this
Thanks,
Dhananjay
Edited by: DBS on Feb 9, 2012 10:21 PM

Hi,
I found the problem.It was because of the connection string.The format was different for oracle tables.
PFB the format
*cnss.open"Provider=OraOLEDB.Oracle.1;Data Source= servername:port/SID;Database= DB;User Id=aaaa;Password=aaaa;"*
And thanks *SH* for quick response.
So closing the thread......
Thanks,
Dhananjay

Problem in Loading Data from SQL Server 2000 to Oracle 10g

Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
     at javax.swing.JTable.boundRow(Unknown Source)
     at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
     at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
     at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
     at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
     at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
Neel

Hi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel

Error while loading data from a text file to a datastore

Hi all,
i am a starter in ODI. I am trying to load data from a text file into a datastore. I have put the file on a unix server whose location is defined in the topology manager. when i am trying to "view data" it is giving me error file does not exist at <location where i have put the file>. Please help me

Hi,
1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
* If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
* If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
* Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
* If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
4. Once View Data is successful, you now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
You need to have a agent process running at the system where your source file resides .
Then while running the odi interface choose that agent .
Thanks,
Sutirtha

Error While Loading data from HFM to Essbase

Hi,
I am trying to load data from a HFM application to Essbase application. The LKM i am using is "HFM Data to SQL" and the IKM is "SQL to Hyperion Essbase(DATA). I am also using couple of mapping expression like {CASEWHEN(HFMDATA."Account" = '3110', 'PL10100', HFMDATA."Account") } , {CASEWHEN(HFMDATA."Period" = 'January', 'Jan', HFMDATA."Period") } etc.
The error i am getting looks like this -
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Invalid column type specified for Data column [Account]
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
I am mapping account dimension of HFM to to account dimension of essbase. Both source and target column type is "string" with length 80. Instead of keeping the target "Essbase application", if i keep an Oracle table, columns of which are exactly like essbase application, ODI is loading data perfectly with proper coversion.
Can anyody please help me out.
Many thanks.
N. Laha.

Hi John,
Thank you very much for your response. Pasting here the SQl generated at step "8. Integration - Load data into Essbase" in the operator in the description tab, for your perusal -
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select CASEWHEN(C3_ACCOUNT = '3110', 'PL10100', C3_ACCOUNT) "Account",CASEWHEN(C4_PERIOD = 'January', 'Jan', C4_PERIOD) "TimePeriod",'HSP_Inputvalue' "HSP_Rates",C8_SCENARIO "Scenario",CASEWHEN(C2_YEAR = '2007', 'FY09', C2_YEAR) "Years",CASEWHEN(C1_CUSTOM1 = '2012', 'Atacand', C1_CUSTOM1) "Product",CASEWHEN(C7_VIEW = 'YTD', 'Input', C7_VIEW) "Version",CASEWHEN(C6_VALUE = 'USD', 'Local', C6_VALUE) "Currency",C9_ENTITY "Entity",C5_DATAVALUE "Data" from "C$_0AZGRP_PLData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
stmt.setFetchSize(srcFetchSize)
rs = stmt.executeQuery(sql)
#load the data
stats = pWriter.loadData(rs)
#close the database result set, connection
rs.close()
stmt.close()
From the SQL, you may find the CASEWHEN expressions. Yes these i have added in the interface mapping section, with the help of ODI expression editor. Following are the expressions i have used, one statement for one mapping each. This is just to make the data of HFM, compatible to Essbase. e.g. - account number in HFM for which i am estracting the data is 3110, but there is no account '3110' in the essbase application, so essbase application wont be able to load the data. To make the HFM data compatible with Essbase, these casewhen statements have been used. I hope its fine to use such statements in mapping.
CASEWHEN(HFMDATA."Year" = '2007', 'FY09', HFMDATA."Year")
CASEWHEN(HFMDATA."View" = 'YTD', 'Input', HFMDATA."View")
CASEWHEN(HFMDATA."Entity" = '100106_LC', '1030GB', HFMDATA."Entity")
CASEWHEN(HFMDATA."Value" = 'USD', 'Local', HFMDATA."Value")
CASEWHEN(HFMDATA."Account" = '3110', 'PL10100', HFMDATA."Account")
CASEWHEN(HFMDATA."Custom1" = '2012', 'Atacand', HFMDATA."Custom1")
CASEWHEN(HFMDATA."Period" = 'January', 'Jan', HFMDATA."Period")
If you can get some idea from the SQL and help me out!
Many thanks.
N. Laha
Edited by: user8732338 on Sep 28, 2009 9:45 PM

Issue to load data from database to XML file. error: ODI-40768

Hi,
While I am trying to load data from database to XML following error is appearing.
ODI-1228: Task TEST_XML_DATA (Integration) fails on the target XML connection MyLOCALXSD.
Caused By: java.sql.SQLException: ODI-40768: Could not save the file <default>:C:\DATA_FILE\www.xml because a class java.io.IOException occurred and said: The filename, directory name, or volume label syntax is incorrect
     at com.sunopsis.jdbc.driver.xml.SnpsXmlFile.writeToFile(SnpsXmlFile.java:751)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.internalExecute(SnpsXmlConnection.java:769)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlPreparedStatement.execute(SnpsXmlPreparedStatement.java:46)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:166)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
jdbc url: jdbc:snps:xml?d=C:\test_xsd.xsd&s=TESTSQL&re=employeesX&ro=true
physical schema: TESTSQL
Knowledge modules are:
LKM: LKM SQL to SQL
IKM: IKM XML Control Append
CKM: CKM SQL
Parameters set are:
CREATE_XML_FILE: true
XML_PATH:<default>:C:\DATA_FILE\www.xml
I have tried to change the directory path but error is still there.
Could some one please help me to resolve the issue?
Regards,
user1672911

Hi,
The trouble in "<default>:" - if you set XML_PATH as C:\DATA_FILE\www.xml instead <default>:C:\DATA_FILE\www.xml- it will work correctly.
Greetings,
Eugene

Unable to load data from DSO to Cube

Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!

Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.

Integrated Planning - trying to load data from basic to realtime cube

Similar Messages

Maybe you are looking for