Integrated YouTube on Original iPad Not Accepting Login Info

Long story short...
Login denied on integrated YouTube app on original iPad.
Googled problem... Enabled 2-step verification on Google and created an Application-Specific Password.
Entered username and new Application-Specific code into password as instructed.
Didn't work.
Googled this problem... A discussion thread on here said something about having to create a new YT account on Desktop and then the login was accepted or something along those lines.
But, I don't want to do that. It's stupid because all the other YouTube sites/apps I use accept my login info. Why there was a random fail with the integrated YT on iPad today, I don't know because it has been working just fine.
Is there fix for this issue that doesn't involve creating a new YT account or am I just going to have to install the YT app from the App store on my iPad?
Thanks in advance...

After I posted this I got so frustrated witht the continuous denial of login acceptance that I just said forget it and installed the YouTube for iPad app, which is 100 times better anyway. So if you have this problem too just move the integrated YouTube to another page or leave it alone and just download the app.

Similar Messages

Will aN original iPad (Not IOS 7 compatible) sync with latest iTunes 11.1.4 on MBP 2012 sync iPhone 5 7.04

I would like to buy an original used iPad but will it synch with my iTunes 11.14 that syncs with my 2012 MBP and iPhone 5 running iOS 7.04?
Just want to have a real ipad that makes ebooks easier to read than on my iphone 5 but am concerned that the original ipad (IOS 6.1.3) will not synch what's in my itunes and I'll have to look to buying a
Ted

Yes, it will.

Skype on Original iPad Crashes on Login

I have an original iPad (64GB RAM, running iOS 5.1.1) that I've been using for years as a VOIP phone that sets next to my desptop. Two days ago (12/09/2014), Skype started crashign on login. No updates were applied that I'm aware of. I've deleted Skype and re-installed (as expected, the App Store asks if I want to use an older version) it. I've even reset the iPad twice (once in recovery mode), reistalled Skype from the App Store both times, and it still quits on login.
Any ideas/suggestions?
Ray
Solved!
Go to Solution.

I hate replying to my own posts, but I had an epiphinay a few mins ago. I changed my password using the web interface and then tried connecting to Skype on the iPad and all went well.
Ray

First generation ipad not accepting passwords for wifi

I have a first generation ipad -- 2 weeks ago it stopped connecting to wifi -- I enter the wifi password and it says "Incorrect password" -- I am positive the password is correct. I have restarted, restarted the router, changed the router channel, called tech for my cable router, soft re-boot, hard re-boot, forget this network, reset network settings, and I just completed a complete wipe out of the ipad to start over... same problem, it says "Incorrect password" -- I am beyond frustrated at this point, can someone please offer some insight to this issue?! I have already gone through all the steps listed on previous posts, its like the wifi just stopped working. It will recognize my network but will not accept the password. all other devices in our home work with the same network and password.
Thanks for your help!!!!

When you say 'open up' - do you mean unlock it so a password is not required?

Any way to override site request to not save login info?

I am the ultimate arbitrator of yes no questions. I don not care if your site requests that my browser not save my login info. I want it saved. If I can not
I do one of two things,
Not got back to the site ( if that is not practicable)
Find a browser that cares about what the USER wants

Yes, unfortunately it is removed.
It seems that 10.9.2 even causes additional problems because I can neither enter my bank account's password with 1Password anymore nor with Keychain. My password is 22 signs long and is now written on a piece of paper.
Very nice improvement!

Dreamweaver CS5 Mac not remembering login info

Hi folks,
About a month ago I had DW lose all my site definitions for no apparent reason. ALL of them. Fortunately I had a backup copy on my laptop and I exported all my site defs and then re imported them into my desktop app. Since that time DW will not remember any usernames or passwords for any of my sites after a restart. This is getting REALLY annoying, and I see NO way of fixing it. The site definitions are all there, but just the login info is missing.
Any help GREATLY appreciated. I don't even know where to begin to try to fix this problem.
Jeff

I had already tried keychain repair. It reported no problems and repair fixed none.
The only thing that looks a little odd in the keychain is some private Adobe Encrypted data that looks something like this:
Checked contents of ~/Library/Application Support/Adobe/AIR/ELS/com.adobe.amp.4875E02D9FB2xxxxxxxxxxx85DF8CE.1/PrivateEncryptedData k
Checked contents of ~/Library/Application Support/Adobe/AIR/ELS/com.adobe.amp.E7BED6xxxxxxxxxxx86B1598278E07.1/PrivateEncryptedData k
Checked contents of ~/Library/Application Support/Adobe/AIR/ELS/com.adobe.WidgetBrowser.E7BED6E5xxxxxxxxxxx8278E07.1/PrivateEncrypt edDatak
Checked contents of ~/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF25xxxxxxxxxxx8EFC56543.1/PrivateEncryptedDatak
Other than that,
I see items that look like they should be working, including the right passwords:
SiteServer 0 application password, Sites\-Site55
and a lot of legacy Adobe Dreamweaver CS3 Site Sites\-Site64-Live Data User PW
Seems like there is some confusion since CS5 allows one login info for both remote and testing, but don't think that is the problem.

Cookies are not saved (login info, cookie acceptance, bank cookies etc)

Cookies are not being saved. examples: if I log into the telegraph site the login does not persist, if I accept the cookies from The Register I get asked again, If I set my location on the BBC news site it resets, the same with my bank website.
I have tried:
disabling all add-ons
resetting firefox
uninstalling and reinstalling firefox (no add-ons at all)
deleting my user config files
deleting anything to do with firefox and reinstalling
unsyncing firefox
I'm tearing my hair out now lol. It's making it impossible to use firefox (especialy with banks that set a cookie to recognise the pc etc)
Any ideas what could be wrong or what else to try to locate the problem?

In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception that you would like to keep.
It is possible that the cookies.sqlite file that stores the cookies is corrupted if clearing cookies doesn't work.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Why does iMessage on my iPad not accept my network connection?

When I try to sign in to iMessage using my apple ID password I get a message that says "Could not sign in. Please check your network connection and try again." The iPad knows it is connected to my wifi network. What can I do? It had been working previously.

Hi joegez,
If you are having issues with activating iMessage on your iPad, then take a look at the article below. You will want to check the settings on your iPad like Date & Time as well as the Wi-Fi settings. If after about an hour you are still stuck then you will need to contact Apple to get to the bottom of it.
If you get an error when trying to activate iMessage or FaceTime
https://support.apple.com/en-us/HT202667
Take it easy,
-Norm G.

Server I5SAP did not accept login request as admin on port 50718

Hi,
We have BI 7.0 running on ISeries on a dual stack.
When we are trying to apply Support Stack through JSPM we are getting an error.
The JSPM is able to connect to server and when the password is supplied it does not take it.
I have tested the password by loggin into the system as j2ee_admin and the password is correct.
There is no VPN in between the remote host and the Server.
I did applied java stack on another SAP System which is physicall running on the same system with another system no.
The system from where I am connecting to the server does have the host entry of the server. (As per NOTE 783965)
The server is on i5sap.bobjane.com.au and host file carries this entry.
I did try connecting to server as I5SAP.bobjane.com.au / I5SAP/ ipaddress but nothing worked.
I am unsure about the what could be the problem.
Appreciate any suggestion.
Thanks & Regards
Mrutyunjay

Hi,
The currently available tci ip ports/services on the system are as follows
Remote Remote Local
Opt Address Port Port Idle Time State
* 50508 000:21:24 Listen
* 50509 000:21:18 Listen
* 50510 000:21:20 Listen
* 50513 001:20:43 Listen
* 50517 000:21:23 Listen
* 50518 000:21:21 Listen
* 50520 000:21:42 Listen
* 50613 001:20:43 Listen
* 50700 000:54:25 Listen
* 50701 001:00:29 Listen
* 50702 001:00:35 Listen
* 50703 001:00:32 Listen
* 50704 001:00:32 Listen
* 50705 001:00:32 Listen
* 50706 001:00:32 Listen
* 50707 000:59:36 Listen
* 50708 001:00:34 Listen
* 50709 001:00:28 Listen
* 50710 001:00:29 Listen
* 50713 001:20:44 Listen
* 50720 001:00:52 Listen
* 50813 001:20:44 Listen
* 52013 001:20:41 Listen
* 52113 001:20:41 Listen
From here it is evident that , it is not authorization or connection problem but the service is missing in the instance itself..
You can see 50717, 50718 missing in BIP instacne where as 50517,505718 available in BIQ instance.
Appriciate any help.
Thanks & Regards
Mrutyunjay

My original ipad wont accept iOS? it says"nework timed out" any help?

i update all the software to windows then when it starts to sync the ipad it says "network timed out".. ive tried everything.. really annoying. please help!!

If you've tried turning off all firewall and antivirus software and it still doesn't download, then you could try downloading the iPad iOS update via a browser instead :
https://discussions.apple.com/message/16703914#16703914

Skype not remembering login info? 7.7

Seems to be recent so is anyone else having sign-in issues with Skype? Until I rebooted today it would always auto-sign in for me. Now it's complainig about not recognizing my sign-in details. Now everytime I boot or open skype its asking for me my login instead of auto loggin in like normally.

Did you tick the "Sign me in when Skype starts" option on login form? Also be sure that you close Skype using "Quit Skype", not the "Sign Out".

Managed server startup script not reading login info from boot.properties

To encrypt the username and password in weblogic admin server, I used a boot.properties file and setting some properties like StoreBootIdentity=true. This works as expected.
Now, I have a weblogic managed server within the same folder i.e.
under /bea/user_projects/domains/mydomain
To get the similar behaviour on this managed server, I created a boot1.properties file and set the following in the startup script
java -Djava.compiler=NONE -ms200m -mx200m $HOTSPOT_OPTIONS -classpath $CLASSPATH -Dweblogic.Domain=mydomain -Dweblogic.Name=$SERVER_NAME -Dweblogic.management.server=$ADMIN_URL -Djava.security.policy==$WL_HOME/server/lib/weblogic.policy -DRCP_PROPS=/data/css/adixit/samsung/scc612/server/cfg/RCP.props -Dlog4j.configuration=log4j.xml -Dweblogic.system.BootIdentityFile=/bea/user_projects/domains/mydomain/boot1.properties -Dweblogic.RootDirectory=/bea/user_projects/domains/mydomain weblogic.Server
When I run the script I get the following :-
<Jan 24, 2005 3:41:44 PM GMT+05:30> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
Why is it not able to pick the username and password from the boot1.properties file ? Any clues ? What settings can I change to make it work ?
Thanks in advance.

Being that you posted this problem a few months ago, I am assuming you found the cause of your problem. I too experienced this same symptom (boot.properties not being read) when trying to start a managed server on a different server than the admin JVM. I found the resolution in the following documentation:
http://e-docs.bea.com/wls/docs81/ConsoleHelp/startstop.html#BootIdentityFiles
Basically, you have to copy the SerializedSystemIni.dat from the server that the admin JVM is on to the secondary server where the managed JVM is going to run. I was able to do as the link says (add the boot.properties file with plain text passwords and have it encrypted). Hope this helps you or someone else down the road.

HT1918 my account has been accessed from another device and i must verify my payment info but it does not accept my info

Hi everyone
I'm trying to purchase some songs from iTunes and i keep getting asked to confirm my payment information and when i do confirm it, it keeps refering me back to the iTunes support centre
can anyone help me out?

If you are getting a message to contact iTunes support then you can do so via this link and ask them for help (on these forums we won't know why it's appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Lightroom 4.3 asks for serial but not for login info for cloud

I istalled the 64bit version of Lightroom 4.3 but it asks for a serial number bu there is no place for log in info. I know I can use the application manager but I ONLY want the 64bit verion. I can't find any options to select unless I am just dumb. Who installs both 32 and 64 bit at same time anyway. 64 is always better with the more memory allocation available as I got 32GB of it.

Months ago, I had a routine clearout of old software boxes etc and chucked out my Lightroom 1.0 box. A couple of weeks ago I reinstalled Lion on my mac to find that I cannot register Lightroom. I have the 3.0 upgrade serial, the 2.0 upgrade serial, but the 1.0 was on the box..
I followed the instructions above to find the files in crashplan form before the fomat that hold the registration details. I have tried placing them in the location described, but it doesn't seem to work.
The serials (or something) are in the file, but given in the string that is difficult to decipher - and doesn't work in the registration screen, wrong size and a mix of letters and numbers rather than just numbers as my 3.0 serial is.
Any suggestions for what I could do? Could I send the strings in to Adobe to be deciphered? Perhaps move files around a bit more?
Thanks in advance,
Rog.

New iPhoto: Does it work on original iPad?

As far as I can see from the specs, the newly announced iPhoto works with the iPhone 4 and the iPad 2, but not the original iPad. Is that correct? If so, why?

Well this page
http://www.apple.com/ipad/from-the-app-store/apps-by-apple/iphoto.html
says this is the case.
Why? Who knows? Only Apple can say for sure but it may have something to do with the original iPad not having the power to run the app.
But to be sure, you'd need to ask Apple.

Integrated YouTube on Original iPad Not Accepting Login Info

Similar Messages

Maybe you are looking for