Integrating BI 7.0 and EP 6.0

Hi,
We are implementeting BI + EP for Our client,When Iam publishing BEx Queries from Querydesigner it is giving error with an exception id.
The reason is in CONTENT Administration Tab of Portal /Portal Content/Content Provided by SAP/Platform Add ons we are not able to find any folder for BI.and BI I- views.
What could be the reason please help.
Regards,
Deepak

Deepak,
First you need to make sure that the conectivity betweenn SAP BI and Portal are established. Please check this link.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/howto...EnsurethatEPxBIconnectivityis+correct
Regards,
Mahesh

Similar Messages

Unity Connection Integration with CS 1000 and Meridian 81 - PIMG

I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.

Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob

What technical components are needed for integration of SAP BI and BO?

Hello,
What technical components are needed for integration of SAP BI and BO?

Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos

Integration General new ledger and SAP orgmanagement

Hello,
as desribed in
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f8f25eba761a7de10000000a422035/content.htm
there is a possibility to integrate object from the new general ledger into SAP HR.
In my case it is not enough to integrate those obect in IT0001, far better would be an deep integration in sap orgmanagement (like the cost center in om IT1001)
Does anyone knows a way to integrate this areas?
Best regards
GeKa

Hi Udo Werner
Thanks for your answer, now is clear that is not any integration between New Ledger and Matereial ledger, even that, I would like to know, what do you mean when you said u201CThe only integration topics might be how to handle the postings of material ledger within the accounting interfaceu201D?, is any transaction related ?
Thanks in advance,
Best regards,
Sergio

What are the integration pts of RFX and Reverse Auctions & ways of creating

Hi Friends
What are the integration points of RFX and Reverse Auctions & ways of creating them
Regards
Surya
Edited by: surya K on Jan 14, 2009 4:56 AM

Hi Surya
You need to be more clear on the thread.
Please detail out what you are looking at
Whether you are trying to integrate SRM Bid Invitation O/P to SAP E-Sourcing RFx draft
or some other integration.
Please spell out clearly
Regards
Tridip Chakraborthy

Integration on quality module and sd module

Hai experts
Any integration on quality module and sd module in sap if yes where the integration point..........
thanking u.....
regards
anjan

SD module is highly integrated with the other modules in SAP.
Sales Order
Integration Points                      Module
Availability Check             -       MM
Credit Check                   -       FI
Costing                        -       CO/ MM
Tax Determination              -       FI
Transfer of Requirements       -       PP/ MM
Delivery & Goods Issue
Integration Points                      Module
Availability Check             -       MM
Credit Check                   -       FI
Reduces stock                  -       MM/ QM (Inspection before moving stock to unrestricted Stock / before despatching the material)
Reduces Inventory $            -       FI/ CO
Requirement Eliminated         -       PP/ MM
Billing -
Integration Points                      Module
Debit A/R                      -       FI/ CO
Credit Revenue                 -       FI/ CO
Updates G/ L                   -       FI/ CO
(Tax, discounts, surcharges, etc.)
Milestone Billing              -       PS
Return Delivery & Credit Memo -
Integration Points                      Module
Increases Inventory            -       MM/ QM (For Inspection)
Updates G/ L                   -       FI
Credit Memo                    -       FI
Adjustment to A/R              -       FI
Reduces Revenue                -       FI

SiteMinder integration with the internal and external facing portals

Hi ,
We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
If you maintain 2 diff(external & internal) LDAP Directories in Siteminder Policy Server what about external users which are not exit in portal data source .
I appreciate if anyone can help me for my above query .
Regards
Tag

Hey Tag,
We do have a physical external Portal and a physical internal portal. The both the external and internal are connected to 2 LDAP directories.
For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory. The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
So each one of them is connected to 2 different LDAP Directories.
I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server. Then each of the Policies is configured to connect to the approiate LDAP Directories.
You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server. It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
Hope that helps.
Regards,
Keith

Integration of SAP XI and none SAP tools

Hi!
I would like to start working with SAP XI.
Where can I find the Step by Step case studies describing different SAP XI scenarios (IDOC/ALE, RFC, File, etc.).
What is the most famous example of integration of SAP XI and none SAP tools?
Are there tool free of charge and can be downloaded?
Thank you very much!
regards
Axel Schulze

Axel Schulze wrote:
> Where can I find the Step by Step case studies describing different SAP XI scenarios (IDOC/ALE, RFC, File, etc.).
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
thats sud be a good start !!!

Anybody help on integration between IS-RETAIL and CRM application?

hello experts!!
anybody help on how is the business process (or) functionality between IS-RETAIL and CRM application?
i mean integration between IS-RETAIL and CRM application.......

Hi Subha
Since IS-Retail is an Industrial Solution package which was built above the Baseline package,all the Business processes which were there in 4.7 is supported by IS - Retail. You can access the Retail Menu in W10T and S000 for your normal Menu in ECC6..
Regards
Anis

Regd : Integration Between Portal Layer And Process Layer

Hi Experts,
I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at help.sap.com.
But from there I could not get much of information. So need your inputs on the same.
Thanks
Pradipta Kumar Mishra

Hi Pradipta,
If you are referring to Guided Procedures as the "Process Layer", then you have one of the three options that I can think of:
1) Deliver the GP processes via UWL in CE Portal
2) Deliver the GP processes via UWL in EP (if your organization has one)
3) Delvier the GP processes via GP Runtime in CE Portal
Of the three mentioned above, option 2 is preferred since your business users get to access their tasks via a single interface. But you need a EP. If that's not the case, I would suggest Option 1. For integrating GP and UWL, please refer to following link.
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/frameset.htm
Thanks!
- Rao

Integration for Business Workflow and SAP Interactive forms by Adobe

Hi
Is any of you able to watch the following SDN eLearning Session ?
<i>Integration for Business Workflow and SAP Interactive forms by Adobe (RIG session 7)</i>
I can play nearly all the other eBooks, but not this one. Any idea ???
Regards, bernhard

I solved the problem.
It is not possible to view the ebook with IE 7.0. So I removed the new Internet Explorer and everythink is working fine.
Greetings, Bernhard

Information about Integration WebDynpro for ABAP and Business-Workflow

Hi Experts,
I'm looking for information about
Integration WebDynpro for ABAP and Business-Workflow
Link, documents and books are welcome!
Thanks
mishak

If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N

Oracle WebLogic Integration's Custom Control and SOA Suite Spring Component

I crated this thread to inform users about some issues with the
Oracle WebLogic Integration's Custom Control and SOA Suite Spring Component
tutorial from
http://www.oracle.com/technology/architect/soa-suite-series/wli_custom_control_spring_component.html
- Fig. 6 doesn't agree with what's just above. This step isn't necessary because it can be create automatically when you make a class.
- Fig. 11 shows the package
sample.oracle.otn.soaessentials.javainteg
and the class should be placed in
sample.oracle.otn.soaessentials.javainteg.impl
- The Business Tier -> Spring 2.5 might not be available. Extensions steps steps should be given.
- Fig. 15 When lgger-context is created in Jdev 11.1.1.3.0 the Spring context is created in
/mywork/SOASuiteWLIEssentials/JavaIntegration/src/META-INF
while in the sample project it is in
/mywork/SOASuiteWLIEssentials/JavaIntegration
- Fig 18 has incorrect class name.
- Fig 19 is incorrect: there is no Spring 2.5 SCA in Jdev 11.1.1.3.0; there is only WebLogic SCA. Where is the canvas mentioned above?
- Fig 28 logger-context.xml is not where it is displayed in the fig. It is /src/Meta-Inf/.
- Most of the fig from the deployment are not up to date.
- I don't understand the need for the portion:
"Implementing the use case in WLI" up to
"Implementing the use case in SOA Suite"
It confused me when I tried to follow the tutorial.

I am also looking for the same .... Please share the CLoning script for SOA Suite from Prod to staging Env...
Thanks.

What are the integration points with sd and qm

hi,
sap gurus,
good morning to all,
what are the integration points with SD and QM.
in r/3.
regards,
balaji.t
09990019711

Dear balaji
Before doing PGI, there will be a preinspection stage where SD will have to integrate with QM. Similarly after sales, whenever there is sales returns, QM will come into picture.
To control the above scenarios, in material master, go to "Quality management" view and click on "Insp.setup" where you need to assign Inspection Types like 04, 06 etc.
thanks
G. Lakshmipathi

Integration points between SD and PP

Can some one explain the integration points betwwen Sd and PP. Related materials would be very help plz
thanks

SD and PP Link
In SAP, there are basicaly some configurations items which provide link between SD and PP, to mention some of them:
- Requirement type
- Requirement class
- Checking group
- Checking rules
In operation wise, depends on the mode of manufacturing. There 2 basic modes of manufacturing: make to stok and make to order. There are many variants in between, but let just concentrate on the 2 basic types.
1. Make to stock
- Production department will produce finish goods base and stock them on the warehouse. They will produce the goods base on forecast. In this case the link is in the forecasting module of PP where all the historical sales order can be taken into account to create a sales forecast.
2. Make to order
- Production department will only produce the goods when there are sales order created.
- During data entry, user can select product variant and this information must be transferred to PP module.
- The sales order number can be reference during planning and production of the goods.
- The stock can also be referenced to a sales order number.
- The product costing module can also refer to sales order number so that if you wish you can identify the margin for each sales order.
Regards,
Rajesh Banka

What are the integration points with sd and pm

hi,
sap gurus,
good morning to all,
what are the integration points SD and PLANT MAINTAINCE.
REARDS,
balaji.t
09990019711

Balji,
There is no major integration b/w SD and PM.
But PM is integrated with CS for all service and repair orders.,
If you really want to see where they can be ssen integrated
Eg:
Pm deifines the roles for the people in shopfloor,if you can make use of these roles and give authorization of removal of credit block to them then it is integrated.
Even when a new machine is purchased or repaired or overhauled the amount is passed to repective cost center internally.
regards

Integrating BI 7.0 and EP 6.0

Similar Messages

Maybe you are looking for