Integrating Biw with R/3

Hi Gurus,
I jus wanna know the Step by Step involved in connecting bw - R/3 wht r pre-reguisites measures to be followed in integrating the 2 sysytems i have just installed bw & R/3 pls help me mailme@[email protected]
regards,
john

Hi John,
You can use this best practice connectivity gide for connectin BW to any SAP source system . it explains step by step procedure to connect the source system s to BW.
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
OSS Note 184971 'Notes on BW source system connections' and
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/content.htm
Bye
Dinesh

Similar Messages

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Problem in starting Integration service with DAC 11g

Hi friends,
Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
Failure connecting to BIA_IS!
Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
Also checked with the dac_env file which has the below contents
REM -----------------------------------------------------
REM
REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
REM PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
REM
REM INFORMATICA_SERVER_LOCATION denotes installation of
REM Informatica components. Example:
REM C:\Informatica\PowerCenter9.1
REM
REM DOMAINS.INFA_FILE_LOCATION denotes the location
REM (including name) of domains.infa file
REM
REM Please make sure to set correct values for variables
REM mentioned above
REM
REM -----------------------------------------------------
set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
set INFA_CMD_STYLE=8
set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
What could be the problem and where to check with the logfile related to the integration service failure in DAC.
Thanks in advance.
Regards,
Saro

Hi guys,
The issue is sorted out. The below are the two precautions to be considered.
*) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
*) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
Regards,
Saro

Integrating FTP with JDeveloper

Can anyone help me with integrating FTP with JDeveloper (10.1.3)
I am developing jsp pages for a web site. the website runs on a Sun Solaris UNIX server.
At present i develop my jsp pages in JDeveloper and save then to a file on my PC. I then have to use an external tool (Ultraedit) to FTP them to my webserver for testing.
I have seen in this forum that there is something called 'ant' which will allow you to FTP direct from JDeveloper. I know zero about 'ant' and after spending a couple of hours trawling arround the web i'm still no wiser.
Can someone give me a hands held, idiot friendly explanation of what i have to do to integrate FTP?
john

Here is a basic explanation of the FTP task in ANT.
You can just create a new Ant build file in your project, add this task with the correct parameters and then right-click run on the build file.
Another options is to use JDeveloper to create standard WAR file for deployment and then passing it to the server to deploy.

Integrating Apex with Cocoon (does it make pdf from taking data from DB)

Friends,
I integrated Apex with appache with cocoon. Its working fine with reports but i want it to work with form on a table or view.The steps below which i have followed for integrating Apex with Cocoon
Steps of pdf Printing of Report with cocoon:
1) Download and unzip the following needed files in D:\Apex_fop directory.
2) Open your command prompt .
Change the directory to D:\Apex_fop\cocoon-2.1.11.
Set the Java_Home environment variable as: set JAVA_HOME= C:\Program Files\Java\jdk1.5.0_21
then type build war
3) After getting the prompt back as D:>Apex_fop>cocoon-2.1.11>
Copy coocon.war file from the folder D:\Apex_fop\cocoon-2.1.11\build\cocoon.
Paste this file into webapps subdirectory in main tomcat directory having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps.....place it in the top
level of webapps directory.
4) Now just startup tomcat as D:>APEX_FOP>apache-tomcat-6.0.26>bin>startup.bat
The cocoon.war file will automatically uncompressed as directory.
5) To change the port of apache tomcat , edit apache-tomcat-6.0.26\conf\server.xml & change port attribute of Connector element from 8080 to 8181.
Just check whether Tomcat is running or not as http://localhost:8181/
& to check cocoon type http://localhost:8181/cocoon/
6) Now copy fop_post directory & paste it undes new cocoon directory in webapps having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps
\cocoon.
7) Now you need to do some apex settings as follows:
In APEX, just log in as ADMIN into apex/apex_admin and went to Instance Settings and did the following:
- Print Serverr: Standard Support
- Print Server Protocol: HTTP
- Print Server Host Address:localhost
- Print Server Port: 8181
- Print Server Script: /cocoon/fop_post
In your APEX application, in the Regions section, Click on the Print link next to your report and do the following settings:
- Enable Report Printing: Yes
- Link Label: Print
- Response Header: Report Settings
- View File As: Attachment
- Output Format: PDF
- Report Layout: Default Report Layout
- Print URL: f?p=&APP_ID.:1:&SESSION.:FLOW_XMLP_OUTPUT_R1063230002781575
8) Open up the Report Page and click Print , You will get the pdf report.
But my requirement is bit different. I have made form on a table or view , so when i am submitting my form the record is getting updated in my database and at the same time a new button is appearing at same page as i have branched it in same page. The new button name is print. I want when i click this print button it should print the record which submitted recently. How can i enable the print functionality on form. Its simple in report but how can it be done on form?
Looking forward for this to know wthr it is achievable or not and if yes what all are the ways?
Thanks in advance for all who is going to post here and to them also who is giving their time in reading my thread
Regards
Adi
Edited by: Adi's on Mar 23, 2010 8:54 PM
Edited by: Adi's on Mar 23, 2010 8:54 PM

You could redirect to a report page instead of to the form page. Then simply print the report.
This makes sense. You would have one page for entering the data and another page for displaying and printing it.

Problem in integrating xMII with VC

hi Experts,
My xMII server Version is 11.5
I followed this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033 for integrating xMII with VC.
Connection URL: http://<myXMIIServerName>/Lighthammer/ALL_TEMPLATES?version=11.5&trace=true
Driver Class Name: com.sap.xmii.custom.integration.jdbc.SAPxMIIJDBCDriver
System Alias: XMII_JDBC
Connection test is successful, after configured System.
I am getting error while FindData Seach in VC,
Inputs given are,
System: XMII_JDBC (this is my system)
Look for: Look for a table
the error is, Error-2305 Cannot retrive catalogs and schemas; check the connection to the selected systems Cannot access JDBC metadata 
I think i made mistake in connectionURL, but connection test is successful.
Please guide me, where i made mistake.
Points will be Awarded.
Thanks & Regards,
Chinnadurai R

Hi Sam,
Thanks for your reply... I am also think that i made mistake in comnnection URL ,
I have created some querys under Samples/Reports,
I gave like this::
http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?version=11.5&trace=true and http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?
and then like this
http://<myXMIIServerName>/Lighthammer/Illuminator/Templates/Samples/Reports?version=11.5&trace=true
I tried using all the URL shown above, but it is not listing the Querys in VC .
Can u guide me how can i form that Connection URL ..
Thanks & Regards,
Chinnadurai R

Integrating Apache with Tomcat?

Anyone have a guide to integrating Apache with Tomcat using mod_jk?
I followed some guides online, but they all seem really dated with some obscure references. This seems like it should be on the top of the list....

Hi Alan.
I've discovered the exact same problem.... 0.0.0.0 instead of 127.0.0.1
You've obviously not had any replys here, but di you end up working it out on your own?

BIWS with Breaks and Sub-Total

Hi All,
Created a simple report with Breaks and sub-total and then i exported that report block as BIWS. When I test it in the BIWS Manager, I can able to see the break data with sub-totals. But when i try to connect the same BIWS with Dashboard, am getting only the detail rows and am not getting the sub-total rows.
Please suggest how to go over this issue.Thanks for your time and support.

You have any idea now ‘nbLines’ works? If its returning total row count, then i think we can try some options with it. Basically am trying to get data like below to apply combo box selectors on Year and Country.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2013
Total
400
2014
India
100
2014
US
200
2014
UK
100
2014
Total
400
Total
Total
800
But am getting it as below, if i apply combox box on Year and Countyr, am getting blank value in between list of values.
Year
Country
Sales
2013
India
100
2013
US
200
2013
UK
100
2014
India
100
2014
US
200
2014
UK
100
2013
Total
400
2014
Total
400
Total
Total
800
Thanks

Problem while Integrating workflow with OID.

Hi I have a problem with integrating workflow with OID.I must execute the wf_ldap.synch_all() but I couldn't find WF_LDAP package body in the database.There is only package specification.How I can restore the wf_ldap package.
Thanks for help..

The file WFLDAPB.pls should be used to recreate the package body for WF_LDAP (this file is in the wf/sql directory).

Integrating OID with BPEL

I would like to know if anyone has integrated oid with BPEL (standalone version)? Is there any documentation available for the same?

The only files that I came across & made changes to are is_config, jazn.xml. It would be great if you could tell me if there any other files that needs to be configured? I copied the ldapclnt10.jar & ldap.jar into
...\BPEL\integration\orabpel\system\appserver\oc4j\j2ee\home\applib as sugegsted in another discussion forum. But that doesnt seem to solve the problem. Am getting NoClassDef found error now when I try to access the worklist.

This content cannot be displayed in a frame after integrating Endeca with EBS R12.2

Hi,
I just integrated endeca with EBS R12.2 , after I ran option 6 (envSetup.sh) , bounced Studio Managed server , now I am not able to see data on eAM or Payable Dashboard.
when I click on Payable Dashboard , I get "This content cannot be displayed in a frame "
Did I miss any step ?
Thanks
sbt

Version Details :
EBS is on 12.2.4 version
Package Used :
Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.2 V5
V44749-01_1of2.zip and V44749-01_2of2.zip

Integrating EP with R/3, BW & third party systems such as LDAP directories

Hi Expersts,
I am looking for Integrating EP with R/3, BW & third party systems such as LDAP directories and Portal application development using HTMLB. Can any one send the related information. if you send the detailed documents with real time scenarios it could be very useful for me. Please send the docs to [email protected]
Thanks in advance.

hi praveen,
refer to this links of integrating EP with BW.it will be useful....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7,
The Architect's World - Episode 23>
/* points r welcome for a helpful answer*/

Integration ODI with Siebel EIM.

Hi ODI forum's
I have installed ODI 11g version in linux platform and I am doing POC on this
The POC like this : Integration ODI with Siebel EIM(I am very new to the ODI)
For this I have installed below softwares.
--- Oracle Database 11.2.0.1.0
--- RCU
--- ODI 11g
--- WebLogic 10.3.5.0
--- OS - Red Hat Linux
The above softwares are installed prefectly..
I have configured the below components after installation was completed.
Configure a WebLogic Domain
Starting the Administation Server
Starting the Managed server
Manually configure the Standalone agent
Question 1 Does we need the configure these components like Java EE Agent, Oracle Data Integrator Console and Oracle Enterprise Manager.
2 Do we need to install Data quality and data profiling (as per my knowledge these are not required )
3 There is file called topology.sh should be created in ODI installation directory, but it was not created.
4. what is the purpose of this file.
Please share me some docs or ppt on how to integrate the ODI with siebel EIM.
Please clarify my doubts and get back me soon.

Hi User;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » System Management and Integration » Data Integrator which you can get more quick response
Regard
Helios

Integrating Lightroom with Adobe Bridge

Hi
I understood that Lightroom integrated smoothly with Photoshop CS3. However, I cannot find a way of opening a photo in Lightroom direct from Bridge. I am sure there must be a way, but I can't find it. Can anyone help please?

Hi Geoff
Thanks for the observation, but - as John said - it would be very handy to have had a seamless link between Bridge and Lightroom for photo development, in the same way that you can open straight into Photoshop for editing. This would have made Bridge more useful.

Integration ps with co , mm and sd

hi sap gurs
where is the exactly integration ps with co , mm and sd.
can u explain this
regards
prasanthi

Hi,
Integration with CO : Certain types of GL acs are defined as cost elements, these can be seen in costing reports.
Costs incurred in project(actual), costs to be incurred(commitments),costs planned can be viewed as part of ps -co integration.
Result analysis wherein actual profits of projects, work in progress etc can be analyzed as part of ps-co integration.
Integration with SD:
Sales order is made in SD. WBS element from Project system is referred in the S.O line item. Milestones depending on payment terms with customers is defined in proj systems (eg : 10% advance, 25% after receipt of material) etc.. These milestones are copied to Sales order Billing plan and subsequent billing can be done.
Integration with MM:
Material masters are defined in MM, In MRP views if strategy 21 is given for finished product, same matl is attached in proj structure, finished product can be produced using movement 581q.
Simimarly procurement type and special proc key decide the type of procurement.Also individual collective indicator in MRP views decide whether the matl would be in plant or project stock. MRP type decides whether requirement would be generated after running proj MRP. Similarly costing and accounting views decide the cost(value) that will hit the project when material is received /consumed..

Integrating Biw with R/3

Similar Messages

Maybe you are looking for