Integrating Blogger into Portal.
Hi,
I need to integrate a blogger into the portal. Is this possible and how?
Regards,
Chaitanya
Hi,
In general, forums and discussion rooms in the portal are part of the KM & Collaboration.
This link will give you good starting point:
http://help.sap.com/saphelp_nw70/helpdata/en/58/f2c94055708231e10000000a1550b0/frameset.htm
Roy
Similar Messages
-
Integrating contentmanagement into portal
I have created a content using BEA content management. Now, I want to integrate it into a portal or a webpage so that user can get the files. I will appreciate if someone can give me links to document where i can get information about this.
Hi,
Now that your have configured R3 to work with LDAP, you may have to configure the J2EE Engine for SSO with Windows Authentication. Please refer to these links here :
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/4bd58c6c5e5f34e10000000a1553f6/content.htm
Windows Integrated Authentication via Kerberos on an LDAP data source
Unlashed: Kerberos ticket based single-sign-on with SAP J2EE engine
Secondly, now that you have maintained the users and roles on the R3 side, you may use the same in Portal. You can select this backend R3 system to be the datasource. This will help you avoid the creation of users and roles on the Portal. To do so, refer to the following links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/00954081efb90ee10000000a155106/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/content.htm
Hope these links help.
Regards,
Sunil -
Integrating IdM into portal solution?
Hello there, I usually hang around in the IdM forum, but I don't seem to get much response on my questions about how to integrate IdM 7.1 in a portal solution, so I thought that this forum might be the right place
Would any of you portal gurus be able to explain how one would go about integrating NetWeaver Identity Management 7.1 into a portal solution? I would imagine that it should be fairly straight forward as IdM 7.1 is based on a java stack system.
Best regards,
AndersHello Sridhar, thanks a lot. I overlooked that the integration actually was described in the official documentation. Best regards, Anders
-
Tutorial: Integrating Blogger into iWeb
I hate how you have to be at your home computer to do any changes to your website or even post something to your blog, so using blogger I figured out a neat little trick I thought might be of some use.
Create your website like you normally would in iWeb, and go ahead and create a news/blog page, just leave it blank. You want to create the page so that in ieb you can go ahead and make links to it from your other pages. Publish your site.
Next sign up for a blogger account and start blogging. When you are done, publish your site through ftp, with the same title as your iweb page (usually blog.html or in my case news.html) Make sure to publish to the right folder on your website. Also don't use index.html, this is generally reserved for the first page a visitor sees and will write over your website. It may take some time to figure out just what to enter into the ftp form. Publish your blog and voila.
The layout will not be the same as your iweb layout unfortunately, but you can link back and forth between the two and can update your blog from anywhere.
If anyone knows how to copy the layout from blogger and incorporate it into iweb, please let me know.
You can see my page at http://www.markmcleod.org/Mark_Mcleod/News.htmlThe layout will not be the same as your iweb layout
unfortunately, but you can link back and forth
between the two and can update your blog from
anywhere.
If anyone knows how to copy the layout from blogger
and incorporate it into iweb, please let me know.
This might help:
http://web.mac.com/varkgirl/iWeb/Aardvarkland/Nav%20Bar.html -
Problem with Print functionality in the BI reports integrated into portal
Hi,
We have some BI reports integrated into portal.and we have a Print button,which is a standard SAP functionality,doesnot work.When we click that print button it takes forever to load the page and print it.
Please help me in resolving this issue and points will be rewarded for sure
BalaHi Edward,
Can you clarify on your statement "You can run 3.x queries normally". I am currently declaring the bex web application string in the BW iview created in this format "infocube=0D_FI_C01&query=0D_FI_C01_Q001" and i am not defining the report template anywhere in the iview properties but still the standard template is displayed.
Pls let me know how to run 3.x queries normally.
Also i am trying to integrate only reports which are developed for BW 3.x format in BI system but still the data is not displayed.
Pls let me know incase the SP level of both EP and BI portal are to be considered for this.
EP 7 portal is on SP9 where as BI 7 is on sp12.
Also i noticed the EP portal doesn't have BI Java Addon. will this matter for displaying reports in BW 3.x format.
As you suggested workaround i tried to create a url iviews directly taking the links from the reports displayed in BI portal , i was able to preview the report but when i added those iview reports to role, the reports are constantly loading as it is trying to contact BI system. There are being loaded constantly with nothing displayed on screen.
"http://sapbw:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_PU_C01_Q011&VARIABLE_SCREEN=X&DUMMY=1"
regards
Bharat -
Integration of JSR-168 portlet into Portal - Complete Guide
Hi there,
the CE 7.1 is described to be compatible with JSR-168 portlets.
Our Company has developed a JSR-168 portlet which comes as a WAR-File
which can be easily included in other application server and portals (WebShpere, Apache).
But integration in SAP Netweaver fails - I am missing a complete documentation
which describes me the necessary steps to integrate a JSR-168 portlet application
into the SAP Application Server and also how to integrate the GUI into a View of the NW portal.
PLEASE HELP ME!!!
Things I tried - Things I failed:
- Imported a EAR-File into Developement Studio and tried to add it to Server
-> Message "EAR Project: ... should have the SAP specific facet in order EAR to be built."
- Deployement via "Deployement Tool" of Netweaver 2.0 (2004s) worked
and I was able to start app but no integration into NW portal view was possible
(Where is the deployement tool in NW 7.1 CE?!?!?)
- I wanted to create a PAR-File by a WAR-File but dont know how?
- I did not find any iView template which is for my portlet type.
Did anyone out there has the same probs or could help me....
Thanks on advance,
Andi-)
Edited by: Markus Sümmchen on Oct 6, 2008 1:47 PMHi Markus,
There is no complete guide for integration of JSR-168 portlets into a portal; however Diyan is correct.
In a nutshell, once you have deployed your portlet, you use GPAL technology in the SAP NetWeaver Portal of CE to create an iView wrapper in the PCD. All of this done by a portal content admin in the Portal Content Studio. Your deployed portet should be displayed in the "Portlets" repository within the Portal Catalog of the Portal Content Studio.
For conceptual and how-to documentation, refer to the following SAP Help Portal links:
- Generic Portal Application Layer (GPAL) Repositories: http://help.sap.com/saphelp_nwce10/helpdata/en/44/5e93dc35624ddee10000000a1553f7/frameset.htm
- Integrating Applications into the Portal: http://help.sap.com/saphelp_nwce10/helpdata/en/45/90e8bfaec26c4ee10000000a1553f7/frameset.htm
- Working with GPAL Repositories: http://help.sap.com/saphelp_nwce10/helpdata/en/44/5b96b37b6f4de1e10000000a1553f7/frameset.htm
Please let me know if this works for you.
Michael -
Reg SRM 7.0 BP integration into Portal
Hi Experts,
I have integrated SRM 7.0 BP into Portal. I have got all the business content provided by SAP. But, I am unable to view the preview of many iViews provided with the business content after the Busines Package integration.
Wheneven I am trying to open the iViews, I am getting a portal runtime error for many iViews. I have checked with the permissions and everything looks fine. Also, the connection is successfully established between the SRM backend system and the Portal and also the usermappin is done successfully.
Can any one of you tell what would be the reason for the Portal Runtime Error that is being given whenever I am tryin to preview the iViews.
Thank You.
Regards,
Murthy J N.Hi Murthy,
Please login to nwa to see the error you are getting when trying to preview the iView.
http://<hostname>:<port number>/nwa
User should have Super Administrator role to see the contents.
Monitoring - Logs & Traces - In Predefined iView - Last 24 hours
In the Column Customization click on user to see the error you or the other user is facing.
I think the system alias name mentioned in iView and the one you defined for the system you created for the backend system are not same.
check these things, and you must be able to solve the issues.
Hope this helps.
Cheers-
Pramod -
Runtime error occured while integrating WD appl into Portal?!@#
Hi all,
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///webdynpro/dispatcher/local/Example_FL/ExampleFLApp' is not valid! Please check the protocol and host entries for system 'SAP_R3'..
See the details for the exception ID in the log file
This is the error that I got while integrating WD appl into Portal. I have Created a Folder in Content Administrator->Niew iView->com.sap.portal.appintegrator.sap
then selected Webdynpro.
Followed by created an iView by selecting appropriate settings. What went wrong. But the WD appl is working fine individually. Please help me
regards,
GaneshHi,
Have you create IView properly?.
Here is the step-by-step procedure to create a web dynpro iView in portal:
1. Logon to portal.
2. Content Administration->Portal Content.
3. Right Click on the folder 'Portal Content'.
4. Select 'iView' ->'New'
5. In the Template Selection, select 'SAP Web Dynpro iView' and click 'Next'
6. In the 2nd step, Give iView Name and iView ID and a prefix. Next.
7. Select application variant, say, 'Java' in the 3rd step. Next.
8. In the 4th step, select the System (Your WAS System), give the project name of your webdynpro, like, local/ABC_Project in the WebDynproNameSpace. In the Application Name, enter the application name of your Web Dynpro Application, say ABC_App. Next.
9. Finish.
10. In the left panel, now you will see an iView has been created.
11. Create necessary role/workset and assign this iView for an user.
Hope this helps.
Kind Regards,
S.Saravanan. -
Integrating microsoft exchange server into portal
Hi All,
can any one suggest me detailed procedure for integrating micorsoft exchange server(MS Outlook) into portal.
I searched in the SDN , i got some idea, but it is not giving detailed procedure.
please explain in detail so that my Outlook will come into portal so that i can check my mails from portal itself.
Thank in Adncance
BalaHi bala,
See the following doc:
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08def089-0a01-0010-9c82-ee2040b4eced">HOW TO INTEGRATE MICROSOFT EXCHANGE SERVER INTO SAP ENTERPRISE PORTAL</a>
Have a look at the following threads:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=82871">https://www.sdn.sap.com/irj/sdn/thread?threadID=82871</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=305487">https://www.sdn.sap.com/irj/sdn/thread?threadID=305487</a>
Some more related threads are:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=40895">https://www.sdn.sap.com/irj/sdn/thread?threadID=40895</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=2976">https://www.sdn.sap.com/irj/sdn/thread?threadID=2976</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=148434">https://www.sdn.sap.com/irj/sdn/thread?threadID=148434</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=8179">https://www.sdn.sap.com/irj/sdn/thread?threadID=8179</a>
Bye
Ankur
Do reward points if it helps!! -
Integrating Portal Lotus Domain Documentum server into Portal
Hi,
Can any one guide me on "Integrating Portal Lotus Domain 5.0 Documentum server into Portal"
Ravi
Edited by: Ravi Sunkara on Sep 10, 2008 1:44 PMHi Ravi ,
Check the link ...
http://help.sap.com/saphelp_nw70/helpdata/en/ba/8bccaef0dac945a4177797f4e29aa0/frameset.htm
Hope it will help you.
Regards,
Sunitha Hari -
Creating Alias for any application which has been integrated into portal
Hi All,
How to create Alias for any application which has been integrated into Portal?
What is portal alias?
What is URL alias?
What is the difference between all the three?
Thanks,
Jyothi.
Edited by: Venkata Naga Jyothi on Nov 23, 2011 10:18 AMHi jyothi,
1. For your first question Regarding How to create Alias for any application which has been integrated into Portal? Can you please be more clear here my question is why do you need to create alias for applications that are integrated into the portal.
2. For your second and third questions find the below links
http://help.sap.com/saphelp_nw70/helpdata/en/6e/8590f1d6d349c9adc34c6a8085189b/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10da65ed-615b-2d10-efbc-ed07a5385633?QuickLink=index&overridelayout=true
Thanks,
Rahul.
Edited by: rahul.girmaji on Nov 23, 2011 6:29 PM -
Outlook Web Access - Integration into portal
Hello All,
Could you please let me know if there is any specific iview to integrate OWA (Microsoft Outlook Web Access) into portal.
I did go thru the docs on configuring OWA into Portal -which specifies to use App Integrator iview and http system (with user mapping), but the result is i am redirected back to the logon page only.
Kindly help.
Regards,
venkat.Hi Venkat,
Please go through the following PDF document..
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_g-i/integration%20of%20outlook%20web%20access%20into%20sap%20enterprise%20portal.pdf
Hope this will help you.
Regards
Kris -
DropDown list appl is not working when integrated into Portal
Hi all,
In my WebDynpro appl, I have a dropdown list.Which sends data to backend(R/3). This appl is working fine, when it is integrtaed into portal, even before i select from dropdown am getting <b>Access Denied error</b>.
Help me.
Thanks a lot.Sounds like a PCD Permissions issue. Try assigning Read Access permissions to Everyone group for the following items:
1) the Folder containing the iView and/or
2) the application itself
Read about how to assign permissions using the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604db05fd11d7b84200047582c9f7/frameset.htm">Permissions Editor</a>
Read about <a href="http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604f005fd11d7b84200047582c9f7/frameset.htm">Permissions</a>
Message was edited by: Umair Salam -
Integrating BI reports into portals
Hi All,
I have a requirement to integrate BI reports into portals. But i dont have any idea regarding this. I dont whether I am posting this thread in a correct forum. If not please correct me.
Can anyone suggest what are the basic steps?
Regards,
Subashini.Create a BI System in the Portal Create a BI System in the Portal:
The BI system must be set up in the portal so that content from BI can be displayed there. The system is entered in the Portal System Landscape Directory.
Procedure
1. Log on to the portal.
2. Start the iView System Administration ® System Configuration ® System Landscape.
3. In the context menu of the System Landscape folder in the portal catalog, choose New ® System.
4. Choose SAP System with Dedicated Application Server for SAP System as the template.
5. Now set the properties of WAS ,ITS,CONNECTOR and USER MAPPING:
Input Field Details
System Name Type Properties
Business Intelligence SAP system with dedicated application server.
ITS
ITS description
Host name
Path
Protocal
WAS Description
Host name
Path
Protocal
CONNECTOR
Application Host
Remote Host Type
SAP Client
SAP System ID(SID)
SAP System Number
User Mapping
Authentication Ticket Type
Logon Method
User Mapping Type
6. After setting the above specified properties ,then one has to check the connections which can be set using
test connections.
If the connection tests fails and says that system aliases needs to be defined, go for the display properties
of the system to add u201Asystem aliasu2018.
Finally test for he connections which needs to be in green i.e. system is configured from Portal to BI.
Rest all the information about how to integrate BW with portal i gave you in the previous reply also after configuring System You need to create ivew workset and role covered in previous mail.
Please reward with points.
regards
Pooja -
Integrating R/3 roles into portal
Hi all,
I want to integrate R/3 roles into portal. can anyone give the details on how to acheive this.
can anyone give steps to integrate R/3 roles into portal.
all helps will be appriciated.
Regards,
Shanthakumar.check out following link might help u
http://help.sap.com/saphelp_nw04/helpdata/en/41/5e4d40ecf00272e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/275d4ff53511d5996f00508b6b8b11/frameset.htm
Koti Reddy
Maybe you are looking for
-
Some of my MP4 videos show up on Apple TV while others do not
I have the latest Mac OS (10.8). I have enabled home sharing between my MacBook Air and my Apple TV. I keep home movies in iPhoto and like the option of viewing them over Apple TV. However, some of the videos just are not showing up. Here is the
-
Safari. When going back on a web page, why does that page start at top?
Hi, new to Apple and macbooks etc, but bought a new Macbook Pro and very happy I am with it too. However, one thing with Safari bothers me. When I am on eBay for instance and have scrolled halfway down a page, I then click a link that takes me to wha
-
Opacity drop down arrow in clip
I am confused on function of the 'opacity drop down arrow' on the top of each clip. After looking at the PIP guide, I am now assuming that it is mostly when PIP is used? Usually I get a choice of 'Motion" with the 6 submenu options relating to PIP I
-
Hello, all. I should admit straight away that my use for terminal is pretty limited. Basically, I use it for changing permissions and for using mysql. So, I was a little puzzled when I recently tried to install a program and the read me file told me
-
I am running 2 2008r2 DC's in a test environment using a network emulator between them to simulate latency and bandwith restriction for when we go to a live environment. Between the 2 DC's I can successfully replicate with no errors all GPO's are bei