Integrating branches with the head office

Hi,
my client is having 1 head office and 2 branch offices ,
both in the head office and in the branch office also they want use sap business one ,
what is the best solution to integrate the branch and head office ,
can any one please suggest the best possible way to do this
thanks for any suaggeations,
naresh k .

Naresh,
You can look at using B1iSN, but the integration of B1 to B1 is not standard "out-of-the-box" and would need to be created. For more information on B1iSN ... you can go to this link ...
SAP Business One Integration for SAP NetWeaver (B1iSN) [original link is broken]
...for examples of B1 to B1 integration using B1iSN ... you can see this link ...
https://www.sdn.sap.com/irj/sdn/softwaredownload&download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/Business_One_Live_Expert_Sessions/SAP_Business_One_Integration_Technology.zip
Eddy

Similar Messages

I have tried to install office for mac and an iWork trial and each time I go to install my "terminal" opens with the heading bash-80X24 and in the box reads Joel$-office installer.mpkg joel$ . nothing further happens

I have tried to install office for mac and an iWork trial and each time I go to install after downloading my "terminal" opens with the
heading
bash-80X24 and
in the box reads Joel$-office installer.mpkg joel$ .
nothing further happens

This is thread from Apple discussions.
Look for the suggestion from Shootist007 towards the end of the 2nd page.
It is just may be useful.
https://discussions.apple.com/thread/3709115?start=15&tstart=0

Please give me idea now I compile all branch data in head office only new r

Hi master
Sir I have 5 office In different city and one head office in Karachi all branch have same oracle system my question is how I get new data and compile for accumulative reporting
I want only new record and modify record not old record
Old record already I import
When I use oracle import and export tool that no give me right result
If xxx table exists in database then import tool not replace and no insert or no replace with previous data with new modify data
Such as
First time
V_no=897 have debit amount 3998 is Islamabad branch and i export form Islamabad and import in Karachi office
Next time
Islamabad office change v_no=897 debit amount with 76555 and add many new record
I export form Islamabad and import in Karachi office but system no change and not add new record in Karachi office
Please give me idea now I compile all branch data in head office only new record and modify record
Thanks
aamir

Here a very simple example with table EMP, assuming source table has a primary key. Firstly you create a materialized view log on source table (necessary for fast refresh) :
SYS@db102 SQL> conn test/test
Connected.
TEST@db102 SQL> create materialized view log on emp including new values;
Materialized view log created.
TEST@db102 SQL> then at destination DB/user :
TEST@db102 SQL> conn scott/tiger@test10
Connected.
SCOTT@test10 SQL> create database link test
2 connect to test identified by test
3 using 'db102';
Database link created.
SCOTT@test10 SQL> create materialized view emp_mv
2 refresh fast
3 as select * from emp@test;
Materialized view created.
SCOTT@test10 SQL>Now emp_mv is the exact copy of emp. To refresh the MV, to reflect changes :
SCOTT@test10 SQL> exec dbms_mview.refresh('EMP_MV','F');
PL/SQL procedure successfully completed.
SCOTT@test10 SQL> ...but I strongly recommend you to read the documentation...

TS2634 I can only get sound through my ipad with the head phones.

I can only get sound through my ipad with the head phones. I haven't had this problem before. I upgraded about a week ago, but this is the first time the sound has been an issue. When I turn up the volume it shows that it is the volume for the headphones but I can't figure out how to adjust the volume for everything. I have rebooted.

Also try this if above doesn't work.
1. Plug and unplug my headphone jack into the iPad four times.
2. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound.

When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen show a blank screen with the heading accessing iTunes. If I go to the right side and search the store the names drop down. Nothing happens

When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
What I have tried:
Uninstalled iTunes,
Removed firewall and protection.
Re-installed iTunes 64bit (still get the same issue)
Restarted firewall, added apple.com etc.
I have created a new user profile to no vail.
Still the same issue. I can access using my iPod

I am having the same problem ever since I upgraded. Have received four emails from Apple support on the
issue and nothing has worked. Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
me to sync my Iphone with the ios 5 upgrade. Went back to 10.5 and sometimes get exactly what you do when
I try an access the store. It looks like something is clearly missing. Have done just about everything I have seen
on threads but nothing works. Really need help.

Why did 29 blend in the tabs with the header both in blue giving me this large ugly band of crap?

Why do you people think it's okay to change the looks and location of important stuff as you like without giving your customers notice or the option to keep their old look and layout? I just updated to 29 because in 28 when i click on a link in my pop 3 mail with Firefox as my default browser, the link stopped coming up in Firefox. But when I installed 29, it came with a couple nasty looking changes that I could not do anything about to get rid of except reinstall 28 and I guess NEVER UPDATE FIREFOX AGAIN to avoid this crap! DO I looked for "themes" and just saw more crap. ALL I want is the default one back. SO IF YOUR'E GOING go to the OPERA MODEL now for updates and start changing everything every update, PLEASE be AT LEAST courteous enough to warn us and provide THE OPTION to retain the look and feel of our last installation! Duh!
STOP CHANGING STUFF THAT DOESN'T NEED TO BE CHANGED JUST BECAUSE YOU CAN AND YOU THINK IT WILL BE PRETTIER BECAUSE, GUESS WHAT, YOU ARE NOT YOUR USERS ,WE ARE, but you don't consult us, don't provide us any choice in this and frankly it shows a supreme lack of respect for us, your users.
After all, WTF made you the arbiters of my (your user's) tastes? I happened to like the old look and hate that giant blue band I got in 29 blending in the tabs with the header.I QUIT USING OPERA years ago and switched to Firefox because of crap like this. Every update The jerks kept changing things moving them. so I only updated and update now when absolutely necessary for the browser to keep functioning and it was a frigging nightmare every time i updated opera. Things always moved all over the place, everything switched colors, location or went when I was perfectly happy with what I had, without ever giving me an option to opt out or change back. It used to take me hours after an update to find everything and get back the skin I liked, Finally I no longer could go back and Opera had become absolutely hideous so I stopped using it and came to Firefox which HAS BEEN GOOD ABOUT NOT PULLING THIS UNTIL NOW. So JUST STOP THE OPERA CRAP NOW!

and it was more than that, the tabs and backgrounds were blue as well and the names of the tabs were only visible with no traditional tab outline, and a whitish see through vague halo appearance of the traditional tabs when i hovered over one. This was nasty and clearly, though sporting a blue XP color scheme, having NOTHING TO DO WITH my xp color themes. In fact I could see that if i chose another xp color, it would all change to that. But then what do I do with the nasty non-tab looking tabs?

HT1459 I downloaded a song from itunes to my nano 7th generation. When i play the song i can't hear it with the head phones that came with the nano

Hi, i downloaded a song from Itunes to my ipod Nano 7th generation. When i play the song on my Nano i can't hear the song with the head phones that came with the Nano. what should do?
Thanks for your help.

Same issue here, but no apparent way to redownload for me in iTunes.

What is the contact number for the head office in canada ?

I have a complain and i want to pass it to the head office , so what's their phone number ?
Regards
Abdul

See all worldwide telephone support numbers

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

HT1435 My Nano 3rd Generation suddenly stopped working. It is a refurbished, not old (to me) and does not get much use. I put it in my pocket with the head phones plugged in & the power off. Now I get nothing, not even the charging symbol when I try to ch

Hello, My Nano 3rd Generation suddenly stopped working. It is a refurbished and I do not use it ofetn and keep it on the charger. The one night I leave it in my pocket with the head phones plugged in and the power off. it stopped working. I thought it lost it's charge so I put it back on the charger. Now I do not get the charging indicator. Is there anything I can do?

Probably needs a new battery.

Head office/branch field and Head office

Hello Gurus,
       what does "Head office/branch field in the billing type" do ? and also what does "Head office
field in the accounting segment of the customer master record" do?
thanks very much!

Hi,
The indicator controls which partner functions of the billing document can be forwarded to Financial Accounting.
Click on : Branch/Head office in the billing type
o   initial : If the payer is different to the sold-to party, the paye
     is transferred to Financial Accounting as the customer and the
     sold-to party as the branch. Any branch/head office relationship
     stored in FI is ignored.
o   A : The sold-to party is forwarded as the customer. Any branch/hea
     office relationship stored in FI for this customer is taken into
     account.
o   B : The payer is forwarded as the customer. Any branch/head office
     relationship stored in FI for this customer is taken into account.
Best regards,
Hemant Patil

Problems with the header

Hello,
I have followed the tutorial using my own Photos but now I have a problem. I have taken a screenshot to shot how the header "involves" with the next line.
I don't know how to solve this problem?
Isabella

Moved to the main Dreamweaver support forum.
It's not possible to determine the problem just by looking at a screenshot. The best way to get help is to upload the page to a website, and to post the URL in the forum. You also need to give more information about what you're trying to achieve. Do you want the navigation menu in a column alongside the heading, or should it be a single navigation bar running below the heading?

Data Integrator Problem with the profiles of the "Security Manager" module.

Hi!!!,
I wanted to be able to obtain a profile that do not eliminate anything in the “Topology Manager” module. I duplicated de original “TOPOLOGY ADMIN” profile and for each object I removed the “delete” method.
That with the purpose of the user that has to asigned this profile can not delete anything of this module. The option delete is disabled, but when the user made clic in the trash can icon or he types ENTER, he can delete only the master repository.
I do not if this is because some update, I´m use 10.1.3.5 ODI version.
Can somebody helpme please???.
Thanks.
Edited by: 807694 on 5/01/2011 11:07 AM

Hi,
For BI 7 data source, you need transport active version from BW development to quality. So the procss is
1. Transport data source in source system
2. Replicate data source in BI system.
3. Transport active version of data source from BI system.
4. Transport other objects.
5. Load data till PSA.
6. Load DTP from PSA to data target.
Regards,
Pravin

Software Problem with the HP Office Jet Pro 8500 A910

Hi Guys
I'd like to know if
The HP Officejet Pro 8500 A910 is supported by the OS X Image Capture Application?
I don't find a MacBook Pro software for this Printer. It is a Multifunctional Printer what prints, scans and also fax !
Now i'll try to scan with the PDFScanner from The Mac App Store.
Do you think it will work with this Printer?
Please help me
Yours,
Felix

Hi @Curved , and welcome to the HP Forums!
I see you're having issues with your ink output. I'd like to help!
I would recommend removing the cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps laid out in this document:
Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Help with the Header.

Whenever I change the header size in one page, it changes the header size in every page I have.
How do I fix this!?!? Is it in the CSS or HTML!?!?
Very new to web designing any help would be awesome
Thank you

This would be a CSS issue. If you want the header text to be a different size on one particular page and then another size on the rest of the site, you should create a style for the one page and then use the standard header style for the rest of the pages. this is common, having the header on the home page different than the rest - so doing this is pretty normal. you could just create a style for the home page header like this
.homepage-header {
          background-color: #ADB96E;
          font-size: 36px;
          font-weight: bold;
or you could wrap the home page header in a div and create a child style like this
.homepage-header {
.homepage-header h1{
background-color: #ADB96E;
font-size: 36px;
font-weight: bold;
Then wrap the header tag in a div using the homepage header style - this way you still have the SEO benefits of using the H tag as your page header.
Hope this helps.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
PHP & ColdFusion Shopping Cart for Adobe Dreamweaver
Stay updated:
http://www.facebook.com/cartweaver
http://www.twitter.com/cartweaver

Integrating branches with the head office

Similar Messages

Maybe you are looking for