Integrating Crystal reports with xcelsius

We are trying to generate few reports using Crystal reports application. There are 7 different requirements in total and we want to show a summary of all the requirements in a single report. Since the qualifications for each of the requirement are different, we are unable to proceed with reports.
Trying to give the summary for all requirements using Crystal Xcelsius dashboard charts and tables, and embed this into a report to provide hyper links to individual subreports, but found few issues while integrating these two applications:
1. If the swf file is bound to crystal reports data, after exporting the rpt file into pdf, the swf charts are not getting displayed.
2. If a range of data for a chart in xcelsius is selected, the same range of data need to be passed from crystal reports for the chart to be generated. If data is more, sum rows are truncated.
How do we solve the issues? Is there an alternative way of achieving the results?
Can someone please share your thoughts on this?
Thanks

Post your question to the Xcelsius forum

Similar Messages

  • Getting Error while integrating Crystal reports with Java

    Hi All,
    I am getting below error while integrating crystal report with java
    [java] os.arch = x86
    [java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
    (Ljava/awt/Image;I)V
    [java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
    [java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
    [java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
    Source)
    [java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
    Source)
    [java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
    [java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
    [java] at JRCViewReport$1.run(JRCViewReport.java:50)
    [java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
    178)
    [java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
    [java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
    spatchThread.java:190)
    [java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
    atchThread.java:144)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:138)
    [java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
    ava:130)
    [java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
    Any help can be appreciated
    Kalyan

    Hi All,
    For got to mention i am using crystal reports XI release 2 with JDK1.4.
    Kalyan

  • Integrating crystal report with java

    Hi
    Any one can send me sample program for integrating Crystal report with java.I dont know how to integrate java with cryatal report.if any one helps me out from this problem an advance thanks to them
    Thanks
    Dilip

    Hi All,
    For got to mention i am using crystal reports XI release 2 with JDK1.4.
    Kalyan

  • Integrating crystal report with swing application

    Hi,
    Any body knows how to integrate crystal reports with swings?
    I'm posting this after a painful search in the net/forum.Any idea
    will be greatly apprecited.
    thanx.
    regards,
    jmos

    The best place to pick up sample code is straight from the horses mouth. [url http://www.businessobjects.com/products/dev_zone/java/default.asp?ref=devzone_main] Crystal java zone

  • Integrating Crystal Report with JSP

    Could any one send me a sample code how to integrate crystal Report
    with JSP. If so it will be a grade help for my project work.
    Thanks Rasika

    The best place to pick up sample code is straight from the horses mouth. [url http://www.businessobjects.com/products/dev_zone/java/default.asp?ref=devzone_main] Crystal java zone

  • Integrating Crystal reports with Java Portal (test=pluto,Prod=Vignette

    Hi,
    Crystal reports is new to me...so please don't mind if i sound outright silly, and would love a shove in the correct direction.
    This question might have been asked here (I tried searching for this.)
    Problem: We have some old CR9 reports with us which we want to migrate to our Portal installation Vignette Portal.
    I have seen some Portal integration kits but after having a look at them it seems it is ir-relevant to us...as it requires some server running...we don't have that.

    Update:
    After more investigation, it looks as if the BO Server "CrystalReports2013ReportApplicationServer"
    from time to time has an issue - not only when promoting, but also when viewing publications that contain Crystal Report documents or when executing them, the java class error or similar issue is thrown.
    Did sb face similar behaviour and knows what is the root cause for "CrystalReports2013ReportApplicationServer" not working probably and throwing the java-class error? - it was running fine for several months, now, the class error showed up twice in one month.
    We need to find out what is causing the issue (aleady checked tomcat and BO-logfiles...).
    Best Regards
    Florian

  • Integration crystal report with ecc

    hi experts
    i am not similar to crystal report,i wanna know if we can develop the crystal report in ECC directly,i find some forums all about bi,crystal report just can integrate with BI?
    also i need some detail documents ,please help me,thanx all
    best regards
    zlf

    Do not cross post.
    Read the "Rules of Engagement"
    Regards
    Juan

  • Integrating Crystal Reports with Ruby on Rails

    Hello:
    I am looking to integrate Crystal Reports into my ROR application. I have been following this weblog for guidance - http://kkarthik.wordpress.com/ - but cannot seem to find any more resources for this on the web. Does this seem like the best method for doing so, and if not, what would be? Also, I am unable to locate all of the required JAR files for this process. Are these included in the download of either Crystal Reports 2008 or Crystal Reports Server 2008? I have these downloaded and still cannot locate the files. Thank you in advance for the support!

    The jar files etc. are available as part of Crystal Reports For Eclipse (CR4E). Don't think they're included as part of Crystal Reports 2008.
    The approach in the blog you linked to is fairly straightforward. As long as you're using JRuby you should allow you to make calls to the Java reporting API. The example in the blog looks fairly limited, it just produces a pdf from a report file, XML schema and data file.
    Making use of the viewer functionality that's part of CR4E will be a bit trickier as it looks like this needs to make calls to a servlet.
    Good luck!
    Tom.

  • Integrating Crystal Reports with ECC 6.0 - Tuning Guide

    Hello,
    Do you know if there is a document out there that describes what we can do to pinpoint performance issues with CR integrated with SAP ECC?   
    There is a WebI Performance Tuning document from WebI to SAP BW.  It explains how to capture very detailed end-to-end analysis times of a single query.  We are looking for something similar for CR to ECC.
    Any help would be greatly appreciated.
    Thank you very much,
    Scott

    I am not aare of such a document. But I ould recommend the usage of InfoSets.
    Regards,
    Stratos

  • Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

    I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
    Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
    I am a newbie at development in visual studio. Any help will be highly appreciated.
    Thanks,
    Rajib

    Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
    Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
    Look in the registry for HKLM\software\business objects and remove the business objects entry.
    Download CR 2008 from here:
    http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
    Ludek
    Follow us on Twitter
    http://twitter.com/SAPCRNetSup

  • Can anyone let me know how to integrate crystal reports with bi 7?

    HI all,
    Can anyone pls let me know the steps involved in integrating crystal reports with bi 7?
    thanks
    Pooja

    1.install BO client tools
    2. install crystal reports
    3.install sap integration kit
    once you install in above sequence you will be able to pull data from BW system.

  • Link to a crystal report with prompt from xcelsius dashboard

    Hi
    How can we make a link to a crystal reports with a country promt?
    If I named the prompt ContryParam in Crystal.
    And I want to open this crystal report by sending f.eks UK as countryname to this report.
    What will the link be seeing as in xcelsius?
    How will the connection be made from xcelsius to this spesific crystal report`?
    BR
    Sadaf

    Hey Sadaf,
    This example uses prompt# to pass "CA" as a value to the first parameter:
    http://<servername>:<port>/CrystalRe
    ports/viewrpt.cwr?id=1152&prompt0=CA
    search for follwing document title for further reading
    Viewing Reports and Documents using URLs

  • Exporting Crystal Reports with embedded Xcelsius content to PDF

    Hi,
    I have a crystal report with an embedded xcelsius chart. I would like to schedule this report using Crystal Server 2008, sending it monthly as a PDF file attached to an email. But after exporting the report through Crystal Server, the xceslsius content is just blank. Shouldn't this be working?

    What is the version of Adobe Reader? Adobe Reader 9 should be there.Also check whether you have Flash Palyer/ flash Active X control installed.
    If you can view the dashboard after exporting it to PPT,it means you have Flash Player installed. You need to try with Adobe Reader 9.

  • Crystal reports with BI

    Hi
    what is deffirence for make crystal reports with Bi and build universe and make report on Universe?
    which will be most useful
    what scenerio we use deffirent cases?

    Hi,
    Crystal reports provides you with more features regarding formating your reports. It is a more powerful but also more complex tool when compared to Web Intelligence. Normally you use CR if you want to create highly formatted standard reports. You can even embed XCelsius dashboards in a CR document. Do not forget that in order to design a CR report you need to install locally the crystal reports designer tool. Another major difference if that depending on the integration option you chose during the installation you can publish your CR reports in both the SAP BI and BOBJ system. This is helpful when you want to implement multipass report bursting and assign reports on SAP roles directly on your SAP system. As you mentioned CR reports are built using direct SAP BI drivers. You cannot build a CR report based on a OLAP (SAP BI) universe.
    Web Intelligence (WebI) on the other hand is web-based and is meant to be a tool for ad-hoc reporting. The user is able to create rather quickly appealing reports and the learning curve is rather short. Web Intelligence reports are based on universes which are created on top of BI queries or InfoCubes.
    I personally find the handling of BI hierarchies a little better in WebI when compared to Crystal Reports.
    Hope this helps,
    Stratos

  • Crystal Reports and Xcelsius Installation

    Hi I have a mac book pro and wanted to learn crystal reports and xcelsius in a hands on way. I have created a partition on the laptop and am wondering which OS to install - Windows(if so which one) or Linux. Immediate goal is have an environment where I can use CR and Xcelsius with a non sap data source. My end goal eventually is to have an environment where I can use Crystal report and xcelsius with SAP ECC6.
    I am trying to learn CR, Xcelsius with SAP ECC and SAP BW. Your ideas and isights are welcome.
    Thanks

    Hi Otto,
    Thanks for the link. Your link will be a good start for me in terms of finding out the major components required to accomplish this 'project'. I am definitely interesting in collaborating and discussing the findings and exploring the areas of opportunity, so lets stayi in touch.
    I dont have access to any windows os right now. So I am thinking about installing linux on my mac book pro since its free and probably going to beef up the ram to 3 gb (per my understanding max supported on my 2007 model). Hopefully this will get me going in the right direction.
    Any recommendations on Suse vs Red hat. looking for something that is free.
    Thanks

Maybe you are looking for

  • Problem with photos on dvd output

    Not sure where the kink is in my process, exactly, but maybe someone will have run into this before... i'm working with hi-res photos in my FCP sequences mixed with HDV video. I've been using the motion tab to resize and everything looks fine in fina

  • Get Document ID based on specific folder in SharePoint 2013 document library

    Hi, I have created document library with multiple folders in SharePoint 2013.I have created workflow to assign file name convention like this "attachment name-ID".When i created document in one folder the ID is 1 and when I created document in anothe

  • The iTunes Library could not be saved.  An unknown error occurred -50

    I moved my itunes to an external drive that I am accessing wirelessly (it is pugged into by time capsule).  When I open itunes I can see and access all of my songs and videos fine but I keep getting the error message "The itunes library could not be

  • How to Render in Premiere pro CS 5.5 High quality but low file size

    Hello everybody, I am using premiere pro CS5.5. I have rendered in premiere pro .mts file this settings : (NTSC, 1280X720,245fps,VBR 1 pass, target bit rate 6mb and max bitrate 9.0mb) my original file size : 2.1GB. after rendering file size 683MB. bu

  • Problem with designing a table in sap form

    Hello Gurus, i am trying to modify a sap form, i have to add to the table in the main window a new column. In the second column i have a description text Char lenght 45, the problem is that the rest of the columns after the second column get disorded