Integrating ecc6.0 with soultion manager

Hi All,
Could some please let me how to integrate soultion manager system to ecc6.0 or 4.7 server after installing sap in unix or windows server.
And also let me know how to integrate Bi or any other sap servers with r/3.
please provide steps in detail if some one have.
Thanks in advance.
kishore

Hi Dude,
Thanks for replying me soon, could you pelase let me know what steps need to be followed in soultion manager.
Thanks,

Similar Messages

Best Approach for integrating SAP CRM with Outage Management System

Hi All,
We are moving towards deploying Outage Management System (Oracle Utilities NMS) to help localize the fault, achieve Outage Management and a transparent network with a near-real time stats. We already have SAP ECC 6.0, ISU, SAP PI 7.0 and SAP CRM 7.0. One of the challenges we are facing is to decide how should we go about the integration of SAP CRM with Oracle's Outage Management System.
Here is a sample business scenario,
CSR receives a call from a consumer and inquires about planned outages for a particular area.
This information is contained in the Outage Management System (OMS). OMS is SOA based and is hosted on Oracle Service Bus.
I want to know that is there any ES Bundles available for CRM-OMS integration? Should we go about Service Based Integration? What are the alternatives to Service based integration? Can it be done using BAPIs?
We receive around 1000 consumer complains and against every complain a ticket is generated in CRM. Now If CRM is integrated with OMS using SAP PI, the volume of the data being exchanged via PI is very much high and exceeds our licensed volume for SAP PI. So I do need to know the best practices for either approach that you may recommend.
Regards,
Adil Khalil

does anyone have an idea about this one, I've asked this question in a few places and no one really seems clear about it.
Also, I've read here and there that SAP Business One is not a real SAP product. It was bought by SAP and is sold by them but has little do to with SAP's technology (R/3, SAP ERP, Netweaver, SAP CRM, ...), and that therefore they don't support it that much ? Is any of this right ?
I'm just trying to get my vision of the SAP universe clear.
Angela

Integrating Trex search With Solution manager

HI Guys,
Please help me with this .
Let's say the solution manager is integrated in the SAP Portal and trex is available in the SAP portal.
Can we search documents stored in the solution manager via the trex which is integrated in the SAP Portal? Is there a how-to guide available on the config?
Any thoughts are appreciated.
Dev.

Hi Dev
I'm facing a similar problem.
We have a trex server. We connected the TRex to our EP KM. Fulltext search in our Portal KM works well.
We have several project documentations on our Solution Manager. I was hoping I could connect the KM repository of the solution manager to our TREX and search the docs from EP. I was able to connect the Solution Manager repository to Trex. The index is working well.
The procedure is described in note 750623 but unfortunately the note is far away from a how to guide so I hope this helps:
Trex:
- Go to Admin Tool. Then landscape - connectivity and click on create "Connection". Enter system information of your solution manager system. Then click on Create - RFC Destination (sm59).
Solution Manager:
- Transaction srmo: Create a new Search Server Relation (DRFUZZY) and enter the RFC Destination you created in the above step and set it to default.
- Transaction spro: SAP Solution Manager - Cross-Scenario Settings - Document Management - Servers - Connect Index Server for Full Text Search. Click on "Define Index Readiness" and mark both entries for "IWBSolar" and save.
- Now go tou se38 and start the report RSTIRIDX_REINDEX. Here enter IWBSOlAR for document area and execute.
- Now go back to spro: Start the IMG activity "Schedule Asynchronous Indexing and De-indexing" and schedule the indexing job (Make sure you have executed the report RSTIRIDX_REINDEX before).
If you want to test the search go to transaction SKPR07, go to tools, select document area IWB Solar and click on "test search".
Unfortunately I don't know if there is any bether transaction for the search.
I was looking for a possibility to search from EP directly to the solman KM. But unfortunately I didnt' find a solution for this. The only way I know is to connect the solution manager over a transaction iview im EP.
Hope I could help.
Marco

CIMC Access After Integrating C Series with UCS Manager

My question relates to the following language:
This guide contains information and procedures for installing Cisco UCS C200, C210 and C250 servers for integration with Cisco UCS Manager release 1.4 or 2.0.1.
Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) . When a C-Series Rack-Mount Serveris integrated with Cisco UCS Manager, the CIMC does not manage the server anymore. Instead it is managed with the Cisco UCS Manager software. You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
Does this mean that you literally are unable to web to the CIMC GUI? Or does it mean that although you can still access the CIMC, the management of the C Series is recommended to be performed via the UCS Manager?
Are they mutually exclusive?
Thanks,
Amir

Just saw this:
These UCSM mode settings enable DHCP, Active-Active NIC redundancy, and Shared LOM NIC mode, which enables CIMC control through the 1-Gb LOM ports, rather than the management port. Any static IP addresses and the management port are disabled, so you lose connection with the CIMC.
So it appears that they are mutually exclusive.

Integration ECC6.0 with UCM

Hi;
I need integrate our SAP ECC 6.0 with UCM of Oracle.
I configure in the transaction AOC0 the next values;
- Http server; http://<IP server UCM> I have one doubt, if the server is with or without http://
- port number: 4444
- http script; idc/idcplg
Storage type: HTTP content server
When check the connectio, i have the error; Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
Any Idea?
Thanks for your help

Hi,
Have you complete this integration activity! If so Can you pls provide some inputs on this like do we need any connector on either side or on both sides or Just by establishing link can we acieve this or any other things need to be considered like custom development etc!
Best regrads
Ravindra

Integrating BI Publisher 11.1.1.5 with Enterprise Manager 12.1.0.1 - Different host

BI Publisher 11.1.1.5 is installed in Host A and Enterprise Manager 12.1.0.1 is installed in Host B.
All the samples and steps given in the oracle doc explains how to integrate them if they are in the same host.
./configureBIP
But how to integrate them if they are on different hosts?

Hi Anandh,
Bi publisher cannot be integrated with EM 12c is its running on a different host
Below are the scenarios
For Standalone OMS setup
BI Publisher can only be installed only on the 12c OMS host in case of standalone OMS setup
For multi oms setup
BI Publisher can only be installed only on the Primary OMS in a Multi-OMS setup.
Ref
How to Integrate BI Publisher (BIP) After Fresh Install or Upgrade of EM 12c Cloud Control ? (Doc ID 1392921.1)
16 Integrating BI Publisher with Enterprise Manager
http://docs.oracle.com/html/E24089_15/install_em_bip.htm#CHDHJFEC
Regards,
Rahul

JCAPS 6 with Enterprise manager 5.1.3

I have a problem to use JCAPS 6 with eManager 5.1.3.
I have installed JCAPS 6 in my PC and I want to use emanager 5.1.3 to monitorate an integration but //localhost:15000/eManager don't permit me the connection.
This is the message:
Connection failed. Please check the following:
- Server type is correct.
- Server is running.
- Hostname and Port number(s) are correct.
- Server SSL configuration.
I controlled every item but I don't understand how to make the connection.
Can you help me about? Thanx
Best regards
Fabrizio

Hi Anandh,
Bi publisher cannot be integrated with EM 12c is its running on a different host
Below are the scenarios
For Standalone OMS setup
BI Publisher can only be installed only on the 12c OMS host in case of standalone OMS setup
For multi oms setup
BI Publisher can only be installed only on the Primary OMS in a Multi-OMS setup.
Ref
How to Integrate BI Publisher (BIP) After Fresh Install or Upgrade of EM 12c Cloud Control ? (Doc ID 1392921.1)
16 Integrating BI Publisher with Enterprise Manager
http://docs.oracle.com/html/E24089_15/install_em_bip.htm#CHDHJFEC
Regards,
Rahul

Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

Hi,
I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
Using qtp in integrated mode worked previously on the solution manager 7.1 system. Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
Sincerely,
David
Edited by: David Snyman on Mar 2, 2012 7:38 AM

Hi Sida,
Can you check SapLogon.ini file maintaining below location please.
let me know it resolve the isse, can you forward your details to <email removed by moderator>
looking forward your response.
Regards
Naveen
File Location
Use
C:\Windows\saplogon.ini
Enable QTP to identify the Solution
Manager Server
C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
Auto log on to SAP Systems for testing
C:\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
64 Bit OS
C:\Program Files
(x86)\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
32 Bit OS
Message was edited by: Manish Kumar

Integration with ticket management software

I have been asked to look into integrating my company's ticket management system with Project Server to provide a quick way to update a resource's activity on a project. (eg: Technician logs hours in the ticket management system, then presses a button
and it updates a corresponding project/task). I have had difficulty finding documentation on the API to see how this could be executed. Does anyone have some insight into this, and could you point me in the right direction?
I tried poking around [ http://msdn.microsoft.com/en-us/library/office/ee758031%28v=office.14%29.aspx ] but didn't catch what I was looking for, though that is very possibly an oversight.

That sounds very similar to the TFS connector available on MSDN Ultimate.
Basically, you'll have to write code against the PSI that plugs in actual hours against a task - which should be referenced in the downloadable SDK.
Alternately, you could look at third party tools like HMS TimeControl which provide a front end timesheet that then pushes back into Project Server and/or the ticketing system. (Mentioned as another architectural option.)
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

SLcM integration with Loans Management

Hi,
I am aware that The Financial Accounting - Loans Integration ES bundle provides enterprise services that integrate the operational and analytical bank applications in the area of loan contract management. As SLcM uses Financial Accounting, does it provide functionality to be integrated with Loans Management?
Best Regards,
Preethi.

Hi Preethi,
SLCM works fine with Grants Management, Funds Management, FICA, FICO and Biller Direct. I am not sure if it has integrations with Loan management as taking loan is students responsibility and institution seems to be no where concerns except issuing admission letter or stating that student in discussion is eligible for loan.
Regards
Vinod

SAP CPS Redwood integration with Solution Manager 7.1 SP8

Hi experts,
I need your help..!!
We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
Regards
Zohaib

hi,
dont have any explicit step by step doc for CPS integration
but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
some more on SAP Central Process Scheduling by Redwood (CPS)
Thanks
Jansi

Integrating EP 6.0 with Solution Manager 3.2 .

Can anyone please help me regarding the steps for integrating EP 6.0 with solution Manager 3.2.
It would be nice if any one would direct me to any link or any presentation where in the steps for the above subject are illustrated.
Regards,
Ashish .A. Poojary

Ashish,
What is your requirement?
Could you be more specific about the area your exploring
Solution manager is huge...
Please assign pts if it helps

CRMOD integration with Content management system

Helll All,
Is any one try with Contenet management system integration with CRMOD. If yes could you please help me with some techniques how to integrated with CRMOD. Thanks in advance.
Regards,
Subbu

If you Google 'Flash SCORM' you should find a good deal of
info.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

BCP Microsoft Platform integration with Solution Manager

Hi
Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
If so how? Is there documentation available explaining the process?

Hi Johan,
There is some level of integration available with Solution Manager. To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
Thanks.

FM integration with Travel Management

Hi,
My FI consultants encountered a message 'Saved trip entailed no cost' upon clicking of SAVE button at transaction PR01 (Travel Expenses).
Any idea what is the meaning of the above msg and what is the missing configuration to get rid of the msg ?
kindly advise,
thanks
alice.

I am also interested in this.
Whenever we are creating advance, system pops up this message. Because, it has integration with funds management this message comes up. It says, no commitments were set up as there were no costs associated it. But even advance is also cost of a trip. But system is not recongizing it.
Is there anyway we can overcome this. Also, because system doesnt recognize advance as an cost, it doesnt display it in PR05 screen. It shows as 0 in reimbursement column.
Highly appreciate if someone can give us some clarity on this.
Thanks.
Kumar

Integrating ecc6.0 with soultion manager

Similar Messages

Maybe you are looking for