Integrating External File Server In SAP EP - Help Needed.
Hello All,
We have a EP 7.0 Running on HP-UX, can some one please tell me how I can integrate an External File Server or a Web DAV Folder into the SAP EP.
Any suggestion would be a great help.
Best Wishes,
John.
Message was edited by:
John Bray
Hi John,
This would be helpful for you for Webdav or external filesystems
<a href="http://help.sap.com/saphelp_ep60sp2/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
Pls reward points if helpful
Regards
Vineeth
Similar Messages
-
Query on integrating windows file server into SAP KM using WEBDAV
hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh NHi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André -
Problem while integrating windows file server into SAP KM using WEBDAV
Hi
I am trying to integrate windows file server into SAP KM using WEBDAV . I have downloaded the kerberos ini filter and included in the windows system. I am only trying to bring the files in the same system into KM but with no luck. When i check the log file in the kerberos folder i am getting
<b>12:02:22 10828/10476 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter (&(objectCategory=person)(objectClass=user) (userPrincipalName=xxxx))</b>.
In the log i am getting the following
ERROR! Delegation Flag:Use any authentication protocol: NOT ACTIVE
Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
Right-click 'IDBSRV8' and choose 'Properties'.
Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
Select 'Use any authentication protocol'.
ERROR! The Trusted-to-Authenticate-for-Delegation flag is not set for SPN 'HOST/idbsrv8.idbhq.org'.
Please check the SPN by calling 'setspn -l IDBSRV8'.
If the SPN is well known, configure the Trusted-to-Authenticate-for-Delegation flag:
Open 'Active directory Users and Computers'. Choose <domain> -> 'Computers'.
Right-click 'IDBSRV8' and choose 'Properties'.
Select 'Delegation' and 'Trust this computer for delegation to specified services only'.
Select 'Use any authentication protocol' and choose 'Add'.
Select 'Users or Computers' and enter IDBSRV8 as object name.
Add the ServicePrincipalName HOST/idbsrv8.idbhq.org.
Can anybody please help me in this regard???
Regards,
Ganesh N
Message was edited by:
Ganesh NatarajanHi Ganesh,
this error message tells you that there is no user in your active directory that has the userPrincipalName xxxx.
The SSO22KerbMapModule works as follows.
1. It receives a SAP Logon Ticket from the WebDAV request.
2. If valid the SAP username is extracted. In your case the SAP username is xxxx.
3. It then searches for a user in AD. It does so using the attribute in the ini-file that has been specified to contain the SAP username. In your case the SAP username should be identical with the userPrincipalName.
So you have to make sure that the portal user id (j_user) is mapped to the same AD user attribute that is specified in the ini-file .
Best regards,
Andre -
Urgent: integrating windows file server into ep using KM.
hi..
can somebody give me detail steps of integrating windows file server into ep using KM.
when i give password in the network path it is not accepting the password of the windows....
Good answers will be rewarded points...
bye....Hi,
You can check:
System Administration-System Configuration-KM-CM-Repository Managers-File System Repository-create a new item
Root Directory can be:
machine\sharedirectory
and in CM-Global Services-Network Paths->create a new item
in Network Path field:
machine\sharedirectory
enter your password
user: domain\user
Integrating Documents from a Windows System into KM
http://help.sap.com/saphelp_nw2004s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm
Patricio. -
PDF file transfer from File server into SAP
Hi,
I need to get the PDF file which exists in the File server into SAP using XI in any format so that I can convert into required form in SAP but the file exists in PDF format in File server or any method other than XI .Is it possible to do it through XI if so please explain me the procedure.
Answers will be appreciated with points.
Thanks,
Ramesh.Hi Ramesh,
In addition to above reply, also go through these blogs whcuh also talk about ADF Conversion:
<a href="/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield:///people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
<a href="/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter:///people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter
Regards,
Subhasha Ranjan -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Any Way to test Integration of File Server with Portal??
Hi all,
I want to integrate File Server with my Portal so that my Application and Data remains seperated.
I have integrated File Server but i am not able to find the Folder of file server in KM.
i have create KM Navigation Iview When i specify any folder that is available in KM it works fine but i can not see the folder of file server...
<b>Is there any test with which i can check that weather my File Server is Integrated properly with my Portal or not?? </b>
Any help will be highly Appretiated ...
its very Urgent!!
Thanks in Advance
VinitHi,
I think already file system repository created in the portal. plz check it
Goto >System Admin>System Config>KM>Content management>Repositories manager>File system Repository. or create a new repository..
You can use File System Repository so that you can integrate ur file server with portal. Refer this link
http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Regards,
Senthil K. -
Transfer data from File server to SAP R/3 AS
hi, i need to transfer data from file server (http:/.....) to SAP R/3 application server. I have the HTTP Host name (http:/......) and login details. please let me know how i can resolve this.
best regards
NeerajHi
You need to create a RFC Destination with the details what you have, then you can create a RFC Fucntion module to read the data, according to the destination system, you have to code that, once you
pick the data from the destination system, later you need to convert it to SAP Format.
To trace your fm status, there are function module availabe in sap, search with http, you can find.
regards
Praveen -
How can I search for files on an external file server (using Linux)?
The configuration is that the mac min is connected (with other Windows XP computers) in an ethernet network. The file server is the only one running Linux. The mini mac has no problems to connect to the server and read the files, write files and create folders etc. But, because the file server is quite big, there are a lot of files and folders (size estimate in total some 350 GB). In a finder window I tried to seach a file name, but the mac does not give any result. The mouse cursor does not visibly change into occupied or so. Searching for a file on the mac is no problem as we know.
Any help or hint what kind of program / setting needs to be used to do this would be appreciated.
thanks
UeliUse the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
make a choice in results and you should be OK -
Integrating existing file server with EP6SP9
hello everyone
we are implementing EP6 SP9 portal for our SBU and we need to integrate our existing file server with portal in which we can upload documents and download existing documents.
do we need to use content management to access this file server using the file system repository manager or it can be done in some other way
If theres an alternate way to do this, kindly explain what needs to be done.
Kindly help
Thanking you
AnuragAnurag,
yes, CM is the software to use for this. you could, in principle, go without CM and code the neccessary stuff on your own. But: The more funcionality you desire (think of: additional properties, search functionality, versioning ...), the more sense using CM makes. Plus you get all required user interfaces (like a repository browser) for free.
Regards,
Dominik -
Passing message text from external RFC server into SAP EXCEPTION parameter
In function module CREDIT_CARD_SETTLEMENT the following DYNAMIC function module call exists:
------ Send items for settlement to a RFC function -------------------
CALL FUNCTION l_fnset
DESTINATION l_rfcset
EXPORTING i_ccseth = i_ccseth
TABLES t_settab = t_settab
t_setexd_h = t_setexd_h
t_setexd_i = t_setexd_i
EXCEPTIONS system_failure = 01 MESSAGE rfc_msg_text
communication_failure = 02 MESSAGE rfc_msg_text
call_function_not_found = 03.
This is the code which calls an external credit card application server. I'm trying to figure out how, on the server side, I can return a message into the rfc_msg_text variable on the system_failure or communication_failure EXCEPTIONS.
Ive found several examples of this construct in ABAP code in the SAP side but I cant for the life of me find anything that shows how to set this up in our external server.
There are several SAP function modules like RFC_PING that have similar constructs but I cant see the compiled C code to tell what command to use to fill in that text. I can raise the exception, just not fill in the text.
Any ideas?Hi Eric,
I do not quite understand the problem.
Is there an external NON-SAP system, that needs to do the call?
Within any external SAP system (inside the RFC Function Module) you can raise exceptions in the following manner:
MESSAGE e398(00) WITH par1 par2 par3 par4 RAISING exception_1.
Message 398 in class 00 contains only & & & & as text.
Each & is replaced by par1 through par4.
Suppose par1='Order' par2='1234' par3='invalid' par4=''.
Then a message would be build like: Order 1234 invalid.
This all would reside in the remote called function module.
When you call this module and after any exception in the call the addition MESSAGE rfc_msg_txt was put, then the variable rfc_msg_txt='Order 1234 invalid'.
But as already stated before, i'm not quite sure what the problem is. Shed some light to it.
Greetz,
Rob. -
Attach external files (pdf) to sap tables .
I have made a report that uses 2 Z tables (header - item) . I have somewhere in my file server some pdf files that i want to connect with each record of my tables .
For example the first record has the 1.pdf the second the 2.pdf etc etc .
I thing that i must use the attachment functiontallity but i don't know how .
Thanks a lot ...you just want to link it or store the attachment in SAP itself.
Raja -
Communication problem between external web server and SAP WebAS
Hello Experts,
We are having a serious problem over here where we had one external server is pushing XML string using a HTTP-POST request to our SAP WebAS server (a BSP application is handling this request). We are not able to see the request coming to SAP i.e. SAP-BSP is not receiving XML.
Also we found that, if request is routed through another proxy server (apache tomcat server redireting the request) connected through VPN to our network, it works but if the the same server is inside our network it doesn't. Rather in that case it never hits the Apache-Tomcat server itself.
We tried to identify the network issue but it seems it is not the network or any firewall issue. When we had a small Echo server (itu2019s a small Java server) running on our SAP machine, we could see the request coming in. So it is definitely reaching the SAP server but the SAP Web AS is not picking up. Rather what we found that if the URL is simple e.g. http://<hostname>:<port> it works but if the URL is complex like something generated by SAP incase of BSP application it doesn't.
Any idea what is causing this issue?
I tried to look at SMICM trace files but got nothing. Any idea where would find the trace of incoming HTTP requests to SAP WebAS?
Thanks in advance.
regards
rajeevHi Rajeev,
Pelase find the below link. i am not sure this is the exactly one for you. But i hope it'll help you.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0350917650DB11174011760851503410End?blog=/pub/wlg/10285
http://www.sap-img.com/basis/basis-faq.htm
Regards,
CSK. -
"original file could not be found" help needed please
Hello and help...please
i have a new laptop, so i saved my itunes music library to an external drive to transfer it to the new machine. I uploaded to itunes with the simple 'add folder' option and all my songs appeared in itunes everything is great i thought.
However, every single song i click on to play comes up with
"the song "insert title here" could not be used because the original file could not be found. would you like to locate it?"
I have searched long and hard through the itunes help etc and found nothing.
can anyone help me? please?
many thanks for taking the time
phillfor windows version, you have to check the "Copy files to iTunes Music folder when adding to library" in preference pane. then every time you add songs to your library iTunes will copy the original files to your iTunes library folder so you don't have to worry about the original files missing or moved.
-
Runtime Error in File Preview of RH7 - Immediate help needed!
Dear all,
we're working on a RoboHelp 7 project under version control.
Today we encountered a major issue with ur project/database. When opening files in the preview window, they are displayed without error. As soon you click on a link within this file that leads to another HTML file, you get a pop-up with a runtime error message. You're asked either to debug or not. Selecting no displays a second runtime error with the same question. After also declining, you get to the selected HTML file.
We have two major sorts of files: Chapter overview pages and topic files. Both are based on the same Style Sheet (CSS) and template. For the overview files the layout is just changed a bit when you create the file. Further there are some extra files don't use the template.
Now I recognized some kind of logic:
- When you open an overview-file, the two pop-ups always refer to runtime errors in line 46 and 49.
- When you open a topic file, the two pop-ups always refer to runtime errors in line 50 and 53.
- When you open a file that is blank and not based on the template, there's no error.
Until now, the error never occured. But since today (or maybe last week und we didn't recognize), this error comes up even for files that were created months ago and never had an error before. They were changed today automatically when a renamed a chapter. Even within our "clean and working" backups we now encounter this error.
Questions:
- Can anyone explain, what a runtime error is at all?
- My assumption is, that it has something to do with the CSS or template, but I'm not sure. What can be wrong there?
- To what lines do the specifications in the pop-up refer to? Where can I find those lines?
As we are in a very critical project phase, I really need your assistance for a quick and effective solution. Please help me as soon as possible!! Thanks!!Hi Tom
Here is my own educated guess.
When you have links of any type in a HTML document, a calculation has to occur at the time they are created. The application has to calculate where the linked item is in relation to the existing page. Then HTML shorthand is created to navigate. Up a folder level is ../ and up two folder levels is ../../. Stuff like that.
Popups are a different story. While you are still creating links, these beasties are actually handled using JavaScript. So the path is supplied in the call to the JavaScript.
As if that weren't complex enough, we now toss Headers and Footers into the mix. Headers and Footers are tied to the Master Page. The Master Page is always in the root level of the project. Links in a Header and Footers often break because of the assorted locations of HTML pages if you are using folders to organize your project. So when you create the link initially as part of the Master Page, things are dandy and as long as the topic is in the project root folder (same as the Master Page) things would likely work fine. But if that Master Page is associated with a topic inside a folder level or two down, things can go to pot in a hurry! (Where are we all headed? And what's with the handbasket?)
Hopefully this helps shed some possible explanation... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks
Maybe you are looking for
-
How do I transfer iTunes library (music only) from PowerMac G4 FW800 to new iPad 4?
How do I transfer iTunes library (music only) from PowerMac G4 FW800 to new iPad 4?
-
How can I add contacts on my Ipod touch 4g ios 5.1.1? help! :(
Help! HELP! HELP! Plus, my Ipod wont connect in our wifi. It says "UNABLE TO CONNECT" eventhough I have the right password. GRRR!
-
I have converted several scanned checklists to form fillable PDF's using Designer. After converting them to form fillable I have inserted several check box objects so that our employees (who all have Adobe Standard) can fill out the check lists and s
-
SQL index of facttable disappears after full optimize + compress db
Hello all, I have a customer that is using Outlooksoft 4.2sp3 for more then a year now. Every weekend a full optimize + compress database is running. Since 4 weeks, the SQL index of the fact table is disappeared after a full optimize+compress. They u
-
Global Talk Text & Data package does it have unlimited incoming mags?